MAKING MY 6.0 POWERSTROKE SOUND LIKE AN AIRPLANE | KC TURBOS 10 BLADE INSTALL | IN DEPTH

[@KCTURBOS]

Beautiful truck and great in depth video on our KC Balanced Assembly!

[@andrewhummel8993]

Could you guys get me a turbo😂😂

[@Subi_doo]

Do you have a balanced assembly for 2021-2022 f350

[@stevenraymer6682]

Man I am a first time 6.0 owner and I sure wish I had your experience with my truck thanks for the videos I’m sure I will be using them to repair some issues with my 6.0.

[@TD-uo4se]

Diesel Ron(RIP) is Smiling Down........ Great vid of that Turbo Assembly!!

[@JUSTINHAWKSMITH]

Gimme chills! Rip Ron… thanks for the positive feed back my man. Appreciate that

[@wetarded1606]

I don't even have a deisel but this was one of the best guide videos I've seen ever

[@Rosario360PNW]

You, sir, have a beautiful truck. Enjoy watching your videos, very informative.

[@JUSTINHAWKSMITH]

@@Rosario360PNW thanks so much for watching!

[@forddiesel2344]

Did the exact same thing to my truck like 4 months ago. Couldn't be happier!

[@JUSTINHAWKSMITH]

Awesome bro !!!!! So Good to hear 🙏

[@MrFitzfn]

Is it still good did the 10 blade drop in last ?

[@tristannivens3269]

Surprised you didn't do some powdercoating on the turbo while you had it apart. Sounds great. 🤙

[@NickW90]

Good job man that was the best video I’ve seen rebuilding and installing the 10 blade

[@JUSTINHAWKSMITH]

Appreciate the feedback buddy!

[@gamecrazy203]

Man this was a great video. Never done a turbo before but this video was awesome. Might jump and do the upgrade for my 6.0

[@JUSTINHAWKSMITH]

Glad you liked it ! Appreciate the support.

[@AA_RON86]

I've got a 10blade in my 06 Amarillo! 👍🤤 My neighbors call it the "Delta Jet"🤦‍♂️🤣

[@micks209]

I wanna do the 10 blade swap but my truck only has 40k original miles and 3k miles on the new turbo lol. Engine bay is super clean I don’t feel like messing around with it just yet, keep up the content!

[@JUSTINHAWKSMITH]

Definitely something you can do in the future ! Thx for watching anyhow.

[@kxp.1496]

Do you even drive it?

[@micks209]

@@kxp.1496 Sometimes, usually just in the summer to tow my boat or to get the fluids going I’ll take it on the highway for a run. I have a Peterbilt I drive daily.

[@RustyNail5856]

Great video, you have a very nice looking truck. i have been looking at your videos, i am glad you made this video, because i have been looking to do this to mine. i have a 2006 ford 4door 4x4 6.0 . i did have 4 of the 7.3 at one time. i love them .but now the 6.0. it is great . keep up the good work. i sub to you. you are at 17.6 k subs as of right now, you are close to 20k.

[@fishhunt9874]

I put KDD heads, a stage 2-10 blade turbo and Warren 175/30 injectors with TSD tunes all from KC in my 2003 a few years ago. Also an adrenaline HPOP and a bunch of BPD upgrades. Truck has stupid amounts of power and tows my almost 8000lb boat and trailer without issue as long as I keep my engine speed above 2000rpm. I have the stock turbo stored that I think I’ll rebuild as a stage 1 with A KC kit. I may reinstall it and have new tunes written just to eliminate the need to keep my RPMs up. I am sure the truck will still have more power than I need.

[@teammcmath-mcmathautos]

Had to replace my 10 blade huge difference. Going to rebuild it so I can go back to whistling Dixie!!

[@LimaTangoZulu]

I think my truck already had a 10 blade installed when I bought it. Sounds exactly like yours.

[@SuperIcarusman]

You must have an 04 or later truck; I didn't realise it myself, but the 03s came stock with ten blades on the hot side.

[@cedarcreekvlogs6247]

Truck is 🔥 my guy just got you a new sub💯

[@freddyhollingsworth5945]

10:46 my cars are so much easier to work on vs my truck... Only if your truck had a full air ride suspension and you could lower it all the way down like a car with the push of a button, that'd make it much easier... Great video!!

[@codystevens3711]

Dropping a comment just cause Truck sounds amazing on my list if I ever get enough cash and time

[@jroddri]

Frkn snds awesome Ima have to check that out for my 06 350 6.0

[@thejacobstevens]

Do you have a video about the maghytec dif cover?. Would like to know more about them on the 6.0

[@JUSTINHAWKSMITH]

@@thejacobstevens I do not sorry ! Never had a problem with mine though. Just always ran them for the look.

[@spartangodzilla2376]

What size of turbine wheel biller did you install with 10 blade compressor wheel.

[@randybarr6218]

That sound awesome 😎 👍🏼

[@JUSTINHAWKSMITH]

Yessir even better in person!!! You know videos don’t do stuff justice. Thanks for watching 🙏

[@MrFitzfn]

That sounds awesome, I'm going to do it

[@JUSTINHAWKSMITH]

Mine only lasted 2k miles. I wouldn’t recommend it.

[@MrFitzfn]

@JUSTINHAWKSMITH ok thanks for the reply, I was really researching, looked like a good kit ... what happened

[@patrickwelch620]

@@JUSTINHAWKSMITH what happened? How did the company respond?

[@araw1212]

@@JUSTINHAWKSMITH wait?! What? I bought the kc 10 blade with extreme rebuild kit was that a bad idea?

[@guiltyasaccussed6449]

why didnt u do the ford turbo drain and feed line updates?

[@JUSTINHAWKSMITH]

Haven’t seen a drain update , done new o rings on it , as as far as the feed line goes , just didn’t feel the need with mine being perfectly fine. Very easy to change if it ever does give out. Thanks for watching!

[@r1rated]

Sweet truck, as far as steering, what type of setup consist with your steering components? I also have a 6.0 with 8-10” lift with Alcoa 24.5 on semi tires. However I have some steering wheel play. Just curious did you have to upgrade or change anything with the steering? Thanks

[@JUSTINHAWKSMITH]

In this video yessir I had full 2” 1/4” wall dom tubing heim joint steering with 1.25” heims. I have a youtube video on that as well check it out. Type in heim joint steering justinhawksmith

[@JUSTINHAWKSMITH]

kzbin.info/www/bejne/b4rNcqt8rdKtZrM

[@guiltyasaccussed6449]

i got a question on the balanced assembly ive watched a few videos but nobody specifies when putting on the compressor wheel do u just run it down snug then tighten to the paint mark? nobody really says and i dont wanna screw up anything btw great video

[@JUSTINHAWKSMITH]

Yessir you put it back to the paint line that’s the proper torque spec marked from KC , any further can break shaft. No further , no less. Thanks for watching!

[@jessebooker9743]

I did this and I’ve never taken out a turbo or anything but I wanted to try and i did everything you done and now I got my turbo all back together the wheels won’t spin freely and i don’t if they are supposed to or not I didn’t put it back in my truck yet because I don’t known if it’s right

[@JUSTINHAWKSMITH]

that is not right it should spin freely something is in a bind sounds like

[@jessebooker9743]

@@JUSTINHAWKSMITH okay I’ll take it back apart and see what I can figure out thanks

[@jessebooker9743]

@@JUSTINHAWKSMITH do you have any idea what it could be it spins nice and smooth until I drop it back down on the exhaust side it fits in good but once I drop it down it won’t spin anymore it’s like the wheel is to big for the housing

[@brandonroberson9807]

Sounds amazing

[@luisroman3379]

you win a new suscriber ✌ from P.R.

[@Catalyst_films]

Wish I had a diesel 🥲 mines not bad for a first build for a 15 year old I’ll get there one day💪🏼

[@dennis8445]

Thanks for sharing it made me subscribe to your channel. Did you get a new unison ring from kc turbo? I hear that they are a good upgrade as well.

[@JUSTINHAWKSMITH]

Yessir I did

[@briandunlevy9528]

Turbo blade sounds great and truck is beautiful. Question, I recently got an 06 F250 with 8 inch lift, 24' Fuel wheels and 35' MT Mud Hunter tires. This is the first lifted truck I've owned so I have a question that I hope you can help with. With these tires is it going to ride a little rough in slow speeds (0-20 mph)?

[@JUSTINHAWKSMITH]

Slow slow speeds 1-10 miles an hour yessir it may. But they could be choppy or have some alignment wear or anything which could make them ride even worse. Maybe try rotating them and see if it helps! Best of luck thanks for watching.

[@LimaTangoZulu]

Don’t forget to do the updates feed and drain lines if you haven’t already.

[@kotawilliams2988]

love my KC turbo

[@EvilToaster621]

Just finished my install using your video (awesome video by the way) mine doesn’t sound quite as loud as yours for some reason. My truck has the factory 3” downpipe into a 4” exhaust. So I’m thinking that’s why. Going to order a 4” downpipe here soon.

[@natewst]

Did you ever order the dp?

[@EvilToaster621]

@@natewstNo, but i did install a hood stack later on. That was ear piercing though, so i had to go back to normal. So i'd say with the bigger downpipe it would be just as loud as the one on this video

[@reidpowers3932]

How did yours fail?ive only heard good things on this kit. Want to pick one up

[@JUSTINHAWKSMITH]

No clue. Mine lasted 2k miles

[@nathandeleon7370]

Im having trouble lining up the blue lines on the wheel provided by kc turbo. what exactly needs to be lined up because i can’t get mine to look exactly like yours in the vid.

[@JUSTINHAWKSMITH]

Sorry just seen this, I’m not sure why you’d have that problem. Did you get it figured out

[@thomaswalkerbyrne1512]

You only "snugged up" the housing bolts behind the compressor wheel... They should definitely atleast be tight if not torqued hope they are still holding up... Prolly are but if they back off.....

[@dennisclarke5478]

Sounds great man!!! How’s the front end parts holding up? I’m very interested in changing over from ball joints!

[@JUSTINHAWKSMITH]

Never had any issues over 10k miles on my first heim steering with only 7/8 heims , this setup is 1 - 1/4” heims so don’t think I’ll be having any issues with these either. Very over kill

[@markzukowski2563]

What center section and unison ring did you use?

[@j.r.w7636]

Just found the channel beautiful build….. can I buy that grill or is it a one off?

[@JUSTINHAWKSMITH]

Sold

[@JUSTINHAWKSMITH]

You can buy your own at overkillfab Instagram page though!

[@douglashundley6777]

Louisville has a couple power stroke 6.0 s

[@ccdailyadvice6130]

Awesome video

[@buddha65281]

Are there any performance gains or is this just for the sound? thx

[@MiguelSanchez-no1gr]

New subscriber 🔥

[@MiguelSanchez-no1gr]

What oil cooler are u running how are your temperature when on the high way and little streets

[@ryanl6722]

Are you still running this? I just pulled mine out and I'm just cleaning it BUT I would love to get the new KC Jetfire Stage 1 Turbo (61/64) - 6.0 Powerstroke (2003-2007)?? Any thoughts on that turbo??

[@JUSTINHAWKSMITH]

No it lasted 2k miles and blew

[@thomaswalkerbyrne1512]

​@@JUSTINHAWKSMITHyou left the housing bolts loose and that'll definitely do it

[@thomaswalkerbyrne1512]

Snug ain't torqued and I'm basing this on the video of you barely snuggling them then installing the compressor wheel.... If I'm wrong I apologize, not trying to be a dick I'm a 20yr master tech and I believe that was the issue. We all make mistakes here and there good job on your videos tho

[@macd3394]

What exhaust you running? Love the bark.

[@JUSTINHAWKSMITH]

5” straight pipe

[@dotdot2009]

DO THEY OFFER ANYTHING FOR THE GUYS WITH THE 6.4? I WANT THE WHISTLE TOO LOL

[@JUSTINHAWKSMITH]

I think so!

[@dinisrodriguez01]

I'm about to order the kit for my 06. Do you know what the difference is from the regular kit vs the extreme kit?

[@AvisXP]

Do you have to get the whole 360 kit or can you just buy the wheel itself and drop it in?

[@joelkeka1272]

Bro luv ur vids look for more suspension and motors

[@bnkwupt]

Sounds just like my ‘03

[@patabernathy1003]

Whats up fam, what rebuild kit did you roll with? Standard or extreme and why?

[@christinadelarosa4649]

How much is the kit for that turbo? Where can I order one? Ford diesel 4x4 f250 super duty 2006 4x4 6.0?

[@JUSTINHAWKSMITH]

Kc turbos website! Or give them a call

[@kiearcotton9452]

What is everything you did to get it to sound like that

[@JUSTINHAWKSMITH]

4” straight pipe , 10 blade turbo wheel as seen in this video , 10” exhaust tip

[@andrewpotter648]

Do u get any power gain or is it just for sound

[@justnsaliga8518]

the 10 blade wheel from early 03 trucks is known to boost faster albeit louder its a 10 blade........ then they went to a 13 blade in late 03-04.5 and 05 impilmented a smaller 13 blade all for the purpose of noise reduction although they preform slightly worse..... 05 - 07 is a small 13 blade late 03-04.5 its a big 13 blade and 03-late 03 its a 10 blade wheel.

[@cristobalrobles3594]

❤

[@johnnycortez46]

Going that high with lift and tires did you change your gears out? Or running stock?

[@JUSTINHAWKSMITH]

stock

[@bryancastanon989]

I have stock exhaust on my 05 6.0, will I need to do other things other than just changing the turbo blade ?

[@JUSTINHAWKSMITH]

Yes , will need straight pipe exhaust to really hear the whistle

[@ryankravik9309]

Does the turbo seem lagyer?

[@JUSTINHAWKSMITH]

No sir not to me

[@joeywahl9664]

I’m gonna have to get me that

[@Yasin5791-d7u]

Hey are you from the South.

[@rivett40]

Mines an 03 so it does sound like that

[@gunnarmcgowan3605]

do you have a blow off valve or something like that?

[@JUSTINHAWKSMITH]

No

[@gunnarmcgowan3605]

@@JUSTINHAWKSMITH Do you have to have the rebuild kit?

[@LivinWithDJ]

🔥🔥🔥🔥🔥💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾

[@philliportiz7068]

I want that for my 6.7 2021 F350 can you recommend someone for installation I want it to sound just like that

[@reaganyoder2279]

If I were you I would check out titans turbos, they make some sweet sounding turbos for those 6.7s

[@peytonruppee2764]

Do they have for the 6.4

[@JUSTINHAWKSMITH]

They offer a lot for all diesels checkout their website www.kcturbos.com

[@taylor.ram1rez]

I hear that whining sound, mine makes a similar sound. Thinking my up pipe is fucked

[@JUSTINHAWKSMITH]

I don’t hear anything in person. May just be the microphone picking up the turbo spool under the hood. It’s a hair louder with the new cold side wheel

[@jjcurry4452]

My truck also has a distinct wine on spool downs that sounds exactly like his as well. All the research I’ve done hints to it being normal... but some say theirs just starting wining like that out of the ordinary. I don’t know!

[@Doom6.0]

Are you running a 4 or 5 inch straight pipe? Sounds so damn good! 🎶🎶🎶🎶🎶🎶🎶🎶🎶🎶

[@Kirsch6.7]

How long in real time did this take you

[@JUSTINHAWKSMITH]

This job is completely doable in 4-5 hours. EASILY. Taking your time.

[@Kirsch6.7]

Since you have to take the whole turbo out, wouldn't be better just to replace it with an aftermarket like a pitbull or garret.

[@JUSTINHAWKSMITH]

1hr worth of labor and 450 bucks. VS 1500+ for new turbo. Really all budget based. Depends what you want to spend and what you’re looking for as far as performance.

[@Kirsch6.7]

@@JUSTINHAWKSMITH Wow, I had no clue they were that expensive! Really appreciate all the help you've given me with my 6.0. Subscribe a few days ago!

[@Kirsch6.7]

@@JUSTINHAWKSMITH Also, In 4:38 when you're talking about that plastic piece, can I just remove that and never put it back on or does it serve some sort of purpose?

[@joelkeka1272]

Jus bought a 2005 Ford f250

[@parales03]

What year is your 6.0?

[@JUSTINHAWKSMITH]

2006

[@tylerolsen1000]

What is your pqint code?

[@JUSTINHAWKSMITH]

T7 charcoal beige metallic

[@tylerolsen1000]

@@JUSTINHAWKSMITH sweet. Ive got the dark Shadow grey metallic cx. Looked kinda similar

[@josepadilla4448]

Is that a stock turbo?

[@JUSTINHAWKSMITH]

Yessir

[@rollincoalbud618]

Why doesn’t he have back seats in his truck

[@JUSTINHAWKSMITH]

Doing a audio build at the moment

[@rollincoalbud618]

@@JUSTINHAWKSMITH I’m building a 6.0 and putting it on a 16 inch lift hope it’s as clean as yours someday 😂

[@timking7496]

Buy ya cheap set of scaffolding to get in that riggs engine bay >>>

[@JUSTINHAWKSMITH]

Great idea but it’s actually not near as tall anymore! Thanks for watching 🙏

[@juanramos9142]

30:12 😩

[@jacobwerner99]

Who is this chic?!

[@Yasin5791-d7u]

I’m Indian.

[@parkeranderson5074]

You could of fooled us.

[@MrMCKinc]

Yup. I’ll be doing this on the wife’s ex.

[@mikescheler5431]

Why didn't you just buy a kc turbo since you bought all new parts of the turbo

[@JUSTINHAWKSMITH]

This was sent to me from KC turbos. Didn’t pay for it.