Making of Mr figure v02 (assembling the 3D printed parts)

[@jambay4785]

Well done. The size is perfect for mini-models. Just on the edge that most folks can put together, very complex bit of work. This could be made into a monster (size) if upscale to max on print bed. !!!! :) :)

[@gokux7856]

I love this ! Brought this off cg trader ! 3d printing today ! Now I can have an army of stormtroopers like mezco !!

[@adelelbadrawy2411]

thank you also if you interested i have made a stormtrooper action figure kzbin.info/www/bejne/fICsXmxuodugaac

[@gokux7856]

@@adelelbadrawy2411 I saw bro! You have awesome work!, I’m going to be adding soft goods like mezco ,But the beautiful thing is now I don’t have to spend a ton of money on bodies , I can just print and make badass action figures ! Thanks again bro !

[@zamanimation6441]

Wow this figure is so amizing

[@adelelbadrawy2411]

thank you

[@ShiningHatsya]

Wish I can see you do 3-inch action figures (think of Nendoroid and Aqua Shooters! scale)

[@KickapooNinja]

That's awesome. Super badass, man! I'm really considering getting a 3D printer and making my own custom Star Wars figures

[@EsThirt33n]

You are awesome!!! Thank you for sharing!!!

[@adelelbadrawy2411]

thank you

[@erickdanilomarroquinalvara8892]

The Best !!!

[@adelelbadrawy2411]

thank you

[@syamsulnizar2114]

How'd you get the fdm material to be so smooth?

[@Rctdcttecededtef]

Any vids explaining your modeling process?

[@MonsterPartsRc]

I would love to print one of these guys in 1/10 scale to use in my RC cars/trucks... there are so few 1/10 (7-inch) action figures...

[@adelelbadrawy2411]

i didn't scaled up to 1/10 before, but the more you scale it up the more loose the joints will be

[@mattchu___]

Think I could scale this up life-size to make a fully adjustable mannequin?

[@pek2602]

Yes

[@PixogenPixels]

Any tips on making these stronger? I printed some of the parts but even when it fits well everything snaps so easily. Basically the thin areas are snapping off at the layer lines.

[@adelelbadrawy2411]

try esun pla+ it's the one i use

[@PixogenPixels]

@@adelelbadrawy2411ah I think the website said just pla. I think that flexibility makes it better

[@CrashElementsLP]

just bought this from CGtrade. cant wait to print this. going to boolen a bikermice from mars head on to the head model going to be so sick to have a fully posibal biker mice

[@adelelbadrawy2411]

good luck

[@CrashElementsLP]

@@adelelbadrawy2411 I dm you on Instagram how it turned out

[@adelelbadrawy2411]

@@CrashElementsLP i'm sorry i didn't see it do you want to ask about something?

[@lRAQl]

how much filament did you use to print those?

[@u.sbricks5892]

For some reason my neck joint loves too crack. Any tips?

[@Mrenderboyo]

Is there a way to print this at the 3.75 inch scale? Im more into that action figure scale and wanted to print figures that toy companies never made (mainly for hasbros indiana jones line and marvel universe line)

[@adelelbadrawy2411]

Unfortunately no because if you make it smaller the joints will not print

[@Mrenderboyo]

@@adelelbadrawy2411 would you be able to make one in that scale for people to purchase?

[@adelelbadrawy2411]

@@Mrenderboyo maybe someday

[@areiftz3667]

It looks like body kun for me.

[@zvjerezvjeric2304]

I'm interested at how small can it be scaled? Make a video!

[@adelelbadrawy2411]

unfortunately if it's scaled smaller some of the joints will not work

[@zvjerezvjeric2304]

@@adelelbadrawy2411 Thanks, too bad....

[@ezioauditore1300]

Amazing figure man. Almost printed it all💪. I may have some future content that I would love to talk to you about. But for now, I'll just try to construct this guy :))

[@CasshanVins]

do you have a video like this but assemblying the female one?

[@CasshanVins]

the body chan one

[@adelelbadrawy2411]

kzbin.info/www/bejne/iXqXkIqDa5mAl7M

[@1godaboveALL]

❤Awesome Figure‼ 😡 Just wish you made it to print at 1/6 scale...

[@tylerhaupt723]

Do you plan to put these files on sale again? I can't believe I waited a day and missed them at $5.

[@adelelbadrawy2411]

i'm sorry but these files was not in sale before

[@burakyuzbasoglu8696]

They are very good . I wish you would draw a figure in 1/6 scale. Due to the increase in the dollar exchange rate in my country, it has become very difficult to buy.

[@gamingwithkev8208]

Can't wait to get my 3D printer next week!

[@thenuanceee]

is it possible to make them taller or shorter?

[@blackmanga1.016]

A question. Could it be printed on a slightly larger scale? I'm an illustrator and sometimes a 1/12 figure is too small for me. by the way I admire your work!

[@adelelbadrawy2411]

thank you yes you can scale up the model but unfortunately the more you scale it the more loose the joints will be, bigger model will need a different engineering

[@pabloherrera7458]

well maybe you add glue to the joint piece and let it dry, you can have bigger joints and it will be fitter

[@SandraOrtmann1976]

Hmm...wonder wether it were possible to strip the armour off Hasbro Black Series Clone Troopers and put it on these guys. Might take some fineggling...but might be well worth it. The mobility of these guys is...not the greatest. Also, no need to wait and hope for Hasbro to make your favourite...if you print the armour also yourself, you can have your dream clone.

[@pek2602]

Will you do 1/6 scale version?

[@adelelbadrawy2411]

maybe i will do someday

[@M4NUSP]

I really love the design. Does it work in 1/6 scale?

[@adelelbadrawy2411]

thank you, unfortunately the bigger the size the more loose the joints will be, so 1/6 scale will need a different engineering for the joints

[@zaquancollier8161]

Songs in this video?

[@sheriffawzi764]

Hi Can you make it one more with more strong details muscles for super hero or fighter, please ? Thanks.

[@adelelbadrawy2411]

i will make it in the future

[@sheriffawzi764]

@@adelelbadrawy2411 Thanks but please make it very soon. Thanks again.

[@adelelbadrawy2411]

@@sheriffawzi764 you are welcome

[@najdiadaniy4152]

Can the feet fit on the shf body kun?

[@adelelbadrawy2411]

no it cant

[@jariahdigital7847]

you deserve more subscriber..

[@adelelbadrawy2411]

thank you

[@goldenpaladin]

Is there any problems to look for while putting it to geather I'm doing a 3d figure of myself so have you tried 3d printing a mullet or anything to your figure?))

[@adelelbadrawy2411]

There is no particular problem if you make your own action figure from scratch you will need to do a lot of testing until you find the appropriate settings for your model, for this model because of the difference in accuracy between 3d printers if the parts don't fit you can drill it or you can cut small parts of the plastic until it fi

[@joaov1774]

Do you think resin printing this figure could work?

[@adelelbadrawy2411]

Unfortunately I don't think so

[@joaov1774]

@@adelelbadrawy2411 would resin be too fragile for it?

[@adelelbadrawy2411]

@joaov1774 I didn't try it myself but people who try it said that

[@baljazz]

What scale are all your figures? Was wondering if it can be printed at 1/12 and 1/10 scale.

[@adelelbadrawy2411]

It's all 1/12

[@SMCNDYYC]

is this the same size as the marvel legends?

[@Jack-sw1km]

It would be about 15 centimeters in height, about the same as 6 inch action figures.

[@JacobHerring13]

How long will it take

[@asuka1363]

Pode disponibilizar os modelos grátis?

[@outtathisworld64]

What about resin can you use that? On a 3d printer or is it pla only?

[@adelelbadrawy2411]

sorry i don't have a resin printer but someone try it and say the resin won't work with the joints they will break

[@RafaelCamacho-ln3gj]

Nice work!! It looks very professional. Can it be printed with PLA or ABS? Which material did you use there?

[@adelelbadrawy2411]

thank you, i use PLA

[@RafaelCamacho-ln3gj]

Adel Elbadrawy Ive tried to create some joints using PLA but they’re really weak ending up breaking... what possibly am I doing wrong?

[@adelelbadrawy2411]

@@RafaelCamacho-ln3gj i'm not sure maybe the type of PLA you use , i use esun+ and HATCHBOX

[@RafaelCamacho-ln3gj]

Adel Elbadrawy Yeah... or maybe could be the infill or some other configuration... Im planning to buy your model too

[@adelelbadrawy2411]

​@@RafaelCamacho-ln3gj the settings i use is: Resolution: 0.1 mm Nozzle: 0.4 Need Supports: Yes Filament: PLA Infill: 40% initial layer height: 0.2 top/ bottom line width: 0.3 brim line width : 0.4 shell wall thickness: 1.2 prin speed: 42 build plate adhesion type : brim

[@Queso366]

What kind of filament did you use?

[@adelelbadrawy2411]

esun pla+

[@outtathisworld64]

@@adelelbadrawy2411 what about resin

[@adelelbadrawy2411]

@@outtathisworld64 sorry i don't have a resin printer but someone try it and say the resin won't work with the joints they will break

[@milesxmorales]

I want one

[@artisticditto7996]

i dont have a 3d printer XD but id buy 2 whole figures from ya~

[@outtathisworld64]

Me too

[@brianprollamante2233]

me too

[@GARIVAY100]

Same

[@차태홍-w2x]

Excuse me, sir Can I use those joint 3d model to make my own figure? I'll share this link when I post the picture of my figure on any SNS

[@adelelbadrawy2411]

if it's for your own use its ok but you can't sell or share the models that include this joints

[@차태홍-w2x]

@@adelelbadrawy2411 sure. Of course I'll not sell or share the file. Thanks for the great model!

[@adelelbadrawy2411]

@@차태홍-w2x you're welcome

[@IloveHolyTrinity]

God bless yal

[@adelelbadrawy2411]

Thank you

[@EXcellentOrganizer]

hey is there another way that i can buy this figure? for some reason I can't make a purchase on cults3d

[@adelelbadrawy2411]

Unfortunately no, currently this is the only way Unfortunately no, i'm so sorry but currently this is the only way did you tried to contact the support of cults3d?

[@EXcellentOrganizer]

@@adelelbadrawy2411 I'm going to try that....I really love this design....I can use it to help with my drawing... Thank you!

[@adelelbadrawy2411]

@@EXcellentOrganizer you are welcome and good luck

[@F4lc0_Is]

Could Mr. FIgure be printed using resin?

[@adelelbadrawy2411]

i'm not sure because i don't know anything about resin printing i only have FDM printer

[@OngoGablogian666]

Was i supposed to build this soon after resin printing in order to accommodate for expansion?

[@adelelbadrawy2411]

sorry but i don't know anything about resin printing, i only have a FDM printer so i don't know what is the setup or what you need to do in resin printing.

[@OngoGablogian666]

@@adelelbadrawy2411 Ok, thanks for your response.

[@adelelbadrawy2411]

@@OngoGablogian666 i'm so sorry i couldn't help you

[@OngoGablogian666]

@@adelelbadrawy2411 No worries, it depends on the brand of resin and other factors out of your control.

[@somistaqueria4513]

Can you make hair for him??

[@adelelbadrawy2411]

Maybe in the next version

[@seresclothing4909]

Do you think it is possible to scale the model up and make a human size Mannequin out of it ?

[@Jack-sw1km]

A human size mannequin would need a whole different engineering process and would need a lot more time to do. So scaling this up would probably not be possible as even scaling it up to a larger scale as a figure would make the joints loose.

[@1godaboveALL]

​@@Jack-sw1km for some reason that just doesn't make sense, even if uniformly scaling the entire print, nothing should change with the composition or engineering of the already worked out scale... it all should just get bigger... I don't know, just saying. This would be MUCH BETTER if it was 1/6 scale since that's what I need dammit😖 This guy is COOL just to damn small... And Yeah, I got'm and I'm gonna try to scale'm up to 1/6 anyway. Just can't figure out the math🤯

[@alexandreximenes5178]

I would like to buy a picture of these with you could you also send me the contact I am Brazilian

[@evanisbored4520]

I'mma make that

[@MrGoatFish10]

Amazing! Well done! 👍 is that 1/12 scale?

[@adelelbadrawy2411]

thank you yes it is 1/12 scale

[@landonsstopmotion7786]

Man my friend has a printer and i dont know if he will want to do all of those parts

[@troopproductions7774]

Are you able to make a spider man I would be able to paint?

[@adelelbadrawy2411]

i will make it someday

[@troopproductions7774]

@@adelelbadrawy2411 and it only took about 3 months

[@vishnuk5680]

Pls make mark 50 iron man action figure 3D printed 🙏🙏🙏🙏

[@adelelbadrawy2411]

i will make it someday

[@syafiqazli8952]

What 3D sofware did you use to make this model.

[@adelelbadrawy2411]

blender

[@evanisbored4520]

How do u get the props

[@adelelbadrawy2411]

what do you mean by props?

[@vikvargas2118]

What’s the name of the 3D printer?

[@adelelbadrawy2411]

ender 3 pro

[@BrickdUprewiews]

How big is it?

[@adelelbadrawy2411]

15 centimeters

[@TylerKShort]

Very cool! what program did you use to sculpt?

[@adelelbadrawy2411]

thank you, i use blender

[@Rctdcttecededtef]

@@adelelbadrawy2411 hello. I was wondering if there are special considerations or workflows for designing a figure like this in blender?

[@pukazpriest7011]

What printer do you have??

[@adelelbadrawy2411]

ender 3 pro

[@candlejack101]

does purchasing these files give me the right to use them to design custom action figures to sell? Like using this as a base dressing it in extra parts ect basically making the best use of your joint work to make dolls and so on

[@adelelbadrawy2411]

no i'm Sorry, it is for personal use only you cannot sale it

[@candlejack101]

@@adelelbadrawy2411 i should clarify, PHYSICAL copies, not... not the model files lmao

[@adelelbadrawy2411]

@@candlejack101 i'm sorry but you can't sell physical copies also

[@candlejack101]

@@adelelbadrawy2411 yknow thats like telling me as jazwares that i cant sell your viewtiful joe figures on ebay, it just doesnt work there are already laws that protect me in doing that your creative commons law ONLY protects you from me distributing these actual files

[@1godaboveALL]

​@@candlejack101 😂🤣😂🤣😂🤣

[@swalls21218]

can this be printed in 1/9 scale?

[@adelelbadrawy2411]

yes you can change the scale of the model but the more you scale it up the more loose the joints will be

[@swalls21218]

@@adelelbadrawy2411 good to know. Thanks for responding!

[@adelelbadrawy2411]

@@swalls21218 you are welcome

[@1godaboveALL]

What's the formula⁉️ how would I scale it up to 1/6??? Thank You

[@1godaboveALL]

I'm using Ultimaker Cura. Shows my X Axis at: 2.2994 Shows my Y Axis at: 5.6556 That is the standard for it as is which will print a 15cm/5.9inch Mr.Figure. What do I do to make it 1/6⁉️ I'll glue toilet paper or something on it to stiffen joints where needed if needed at all. I 😭 I JUST WANT'M AT 1/6 SCALE‼ 😡FOK‼

[@michlok1358]

hello.. is this scale 1/18?

[@adelelbadrawy2411]

no its 1/12

[@michlok1358]

@@adelelbadrawy2411 tq sir.. i hope to see u making video for action figure 1/18

[@Idk-dc7hv]

What website did you use?

[@adelelbadrawy2411]

website i use for what?

[@Idk-dc7hv]

@@adelelbadrawy2411 making the figure

[@adelelbadrawy2411]

@@Idk-dc7hv you mean the 3d program i used? it was blender

[@Idk-dc7hv]

@@adelelbadrawy2411 ah, thanks

[@adelelbadrawy2411]

@@Idk-dc7hv you are welcome

[@dtv.mbx2]

Can I get one sent to me whole please.

[@adelelbadrawy2411]

im so sorry unfortunately currently i can't sell pre made one out of my country because shipping is very expensive and I cannot guarantee the safety of the package

[@sweetanstudioz4480]

Which 3d printer did you use and I am an 11 years old so which 3d printer will be suitable for me to make thease action figures because I love toys

[@adelelbadrawy2411]

i use Ender 3 pro

[@sweetanstudioz4480]

@@adelelbadrawy2411 thankyou

[@bradleyfantasticeboyo4794]

666th like lol

[@Fazoéleson]

Much gaps.