Making of valve seat cutting machine - The Spindle

[@user-gn5tb9zx4k]

Бразер просто супер. Ты сейчас спас жизнь как минимум всем гаражным мотористам!))

[@user-gn5tb9zx4k]

Просто огромный респект за без ценный инструмент!

[@conservative-proud]

Your work and your skills are nothing short of amazing ! I love your level of perfection !!

[@h-j.k.8971]

Ten years ago I would have been your first customer, back then I bought a manual Hunger maschine. Greate stuff.

[@johngoode6787]

I'm absolutely gobsmacked. I thought you bought this not made it. Your a genius Paul !!

[@atcmadness4351]

You're amazing, I can do allot but I dream to be ble to do all that you can. Takes so long, so much time, space, money, machinery, practice, I get better all the time but you sir are a MASTER of the craft!! Much lovbe from the USA...

[@nickkiofetzis5667]

i love your work paul, that's the most impressive machine i have ever seen made

[@ellieprice3396]

I usually don't watch videos without narration but this one hooked me. Still don't understand much about it but the detail and precision of construction is fascinating to watch.

[@СергейЯ-з9м]

Респект и уважуха. Особенно порадовали подшипники - 3ГПЗ. Саратовские.

[@dsadzaglishvili]

УГУ

[@zaran101]

Лучше поменять на скф как минимум, 90% отечественных подшипников - Китай перемаркироваваный. Нормальные только с военной приемкой

[@nicolademacor8476]

Complimenti! Hai costruito una macchina che non ha niente da invidiare a quelle professionali dei marchi migliori BRAVISSIMO!

[@edt21]

Awesome job, well thought and ridiculously well built, just beautiful !

[@igorengineer]

Доброго времени суток. Спасибо вам за ваше видео. Вы помогли мне в проектировании моего станочка. Я изготовил по другому проекту, но вы мне помогли, дали правильное направление в разработке моего проекта. Огромное вам спасибо.

[@mrwolsy3696]

Superb, a toolmaking background is self evident.

[@Cys62]

Gosh, you are really good with your hands. I used to learn how to operate the lathe machines from my granddad, but i know, i m maybe only 1/20th of your skill maybe a lot less. I know my belated granddad would be extremely envy of all the tools you have... he would definitely be extremely excited to just look at all these machines.. I used to work the crankshaft polishing machine for him too.

[@PaulXchannel]

Thank you very much.

[@ashtechltd]

My god I thought it was a Mira VGX21 or serdi micro magnet you adapted.... but to make this from scratch, that’s some achievement. Respect to you 👌🏼

[@charlesdefrancisco5056]

So that’s quite a tease..I had race engine shop in the muscle car era and in fact held several speed records in drag racing with oval track dirt and asphalt moving on to unlimited off shore....but everyone gets their fifteen minutes of fame....I probably did three angle valve seats than avg person takes breaths and was very successful with a rigid procedure and accurate keel way equipment.....your machine is so very nice and only one better that is for sale would be in my opinion a Newell one point system...it’s very cool and accurate..but it’s about $49-50 thousand which is a lot of valve jobs.. But again you are quite the craftsman .

[@PaulXchannel]

Ok

[@TUNDRA54BIYS]

👍 Похож на ротлер. Только там на пневме, башня двигается. А в целом похожая констукцыя использовалась в сороковых годах.

[@pemsalvan2464]

You made a machine to fix machines... god level skills 👊😎

[@jeffnabors833]

Beautiful as well as functional. You are a true artist.

[@juniormotosba]

Paulo show de conhecimento essa ferramenta é útil pra minha área, vc gastou quanto pra fazer aí? Mostre mais detalhes e explicação do material que vc usou por favor Deus abençoe sua vida sempre

[@JMB676]

Wow ur a true craftsman at a true top of the food chain very impressive to watch ty for content

[@PaulXchannel]

Thanks for watching.

[@evGEN1]

@@PaulXchannel Hello. Excellent result of the work, I admire you. Can you share the drawings for your invention? Thank you. [e-mail]

[@evGEN1]

[e-mail]

[@PaulXchannel]

Thanks for watching. Just this video.

[@anhhuynh5219]

Hey Paul, it's quite a home-made precise machine that you have made, a very genius & doable state-of-art gadget, like it !

[@rigato97]

Did you make the robocop hands? 🤔... Ha,ha,ha..what a master piece.., very inspiring, 👍everything is so detailed and smooth... Thanks bro.

[@IvanA-k7i]

Отличная работа👍

[@DenTuning]

а откуда ты? Где вял Российский подшипник??))

[@serjaly]

Он из Словакии.

[@markphilipsantamaria8790]

Always amaze or your work paul..no.1🙌🙌

[@johnjohannemann1220]

I love what you do and was very surprised you would utilize a pair of old channel locks on a double net instead of utilizing the proper spanner wrench. If you did not have one you could make one very easily. Your creativity at times can be mine blowing. I am not nitpicking here. Just offering my own opinion.

[@PaulXchannel]

We each have different software ;)

[@Antoha_Sol]

Отличный станок получился. Только я не понял, как устроена пневматическая фиксация шпинделя. Чем зажимаются полу кольца подшипника?

[@СергейЗагоруйко-н1я]

Очень круто! 👍

[@izakoliver]

Wow you are an incredible craftsman! Well done! Love your videos and keep up the good work! Cant wait for new videos 👌🏻

[@benhur3251]

Solid work good quality you are the champion paul,,

[@IanOberhotlzer]

wow you are very clever and talented, I love this machine

[@denishent8744]

Hi, awesome job, really, huge respect. I have build a couple CNC machines, so i believe i would manage to build it by myself, but i have no time to create a drawing. Would you maybe sell the cad drawing and list all parts needed for the build? Best regards!

[@ПавелГаврилов-р4ы]

Здравствуйте крутой станок в итоге а можно чертёж? такой же хочу сделать!!!🤩🤩🤩🤩

[@jirawad]

Thanks for the Smooth VID. Pleasure to watch trough.👌

[@НиколайБочевар]

Oh, I get that.How does the mechanism itself work,how does the air pass, the direction?You have two air outlets.One on top and one on the bottom.On top of the faceplate with a groove,on the bottom without.Rubber rings at the top and bottom.What is the direction of the air? Does the tool lock when there is no air? Due to the elasticity of the rubber rings?If it's all a secret, I won't be offended.I like your attitude to work and the cleanliness of the workplace.And your refusal will not change my attitude towards the Master.Thank you very much!

[@PaulXchannel]

the diverter valve in the cabinet directs the air

[@gerjan676]

hello paul, love the design of the machine as well as how you created it, do you maybe have a source for the air brake spindle? couldnt really find a detailed expalantion in the comments, thank you!

[@maxwellleckie960]

It used air to compress two halves of a spherical bearing. When compressed, the halves press on the bearing, clamping it in place. It is built with rubber rings placed between the caps and halves. These rings act as the "pistons". There is about a second of footage of installation. The hissing comes from the bypass, as it releases air so the brakes are released.

[@BeauA.]

Awesome build. Do you have a source for the Spherical Plain Bearing?

[@claytonreed7489]

I love that you created this machine, how could one get this machine or the information to build one, I very much need a seat cutter like this and it would work for the cylinder head work I would do.

[@redmountains6516]

Супер золотые руки!

[@gerry343]

A very impressive machine- it looks like a commercial product.

[@PaulXchannel]

Thanks

[@bullvine2062]

True expert. Great videos.

[@PaulXchannel]

Thanks

[@warneymotos]

Preciso dessa fresa, você tem para vender onde ?

[@stefantd9296]

Congratulations, it looks very good ..! I see a potential problem! I don't see the steel parts hardening. Some time ago I also made such a machine, after a few months of work the thread of the feed nut wears out and it started to tremble during cutting. And congratulations again, it looks great, like for a photo!

[@PaulXchannel]

Thanks for watching.

[@chronokoks]

Na nasinca (google toto slovo neprelozi) celkom pekne videa a hlavne dost dobra pracicka. Len tak dalej! Pan ma trpezlivost a skills!

[@cristianarad6637]

Good job,good work,my friend!Best regards from Arad/Romania!

[@dbriggs1689]

Expert level. Great job.

[@MsKonstantin65]

Интересно и познавательно. Хочу повторить. Только теперь возникли вопросы к автору. К машинке подходит два шланга. В одном давление в другом вакуум или как??? Не понятно что подкладывалось под крышку шарнирного соединения 3гпз ( ш/с получается ссср или россия) . Подскажите его марку. Черного цвета это просто уплотнительная резинка или какая-то специальная камера? С другой стороны такая же или нет? Как происходит ослабление зажима шара и как он зажимается?

[@АлексейБакланов-д6у]

Как зажать я написал выше, а как он добился лёгкого плавания я тоже не понял.

[@ВадимРуденко-щ7д]

Здравствуйте. Подскажите пожалуйста как сделан пневмо подпор и зажим шпинделя 9:39

[@ГаражСтраныСоветов]

3ГПЗ!)) Уважаю!))))

[@HOOK-cl3mf]

PAUL очень красивая работа. А можно узнать стоимость станка для резки седла клапана и можно у вас купить?????? Сколько будет стоить. Если нет то можно чертежи купить, сколько будут стоить??????????

[@ezequielsilva2709]

Impressionante! 👏👏

[@adikvolodie4348]

Отличная работа! Подписка! Лайк!

[@mohammadsohaib5748]

hi dear you use seals for air brake

[@MrAhell]

Wahoooo. Fantastic Job.

[@bb21again.67]

Yes !!!!!! a machine that can cut 4 valve/cylinder seats unlike the very expensive Serdi, however the rubbing noise indicates tool "chatter".

[@WrenchHead]

Where can the cutter head be obtained?

[@Villa7]

Where you from sir,,,,you very² geniuse and creative,,,,you work tools very nice and awosome

[@PaulXchannel]

Thanks for watching.

[@viorelindeamna6405]

Bravo Paul 👍👍👍🙂🎸

[@ganjaradam7722]

Nice..did u sell that product?

[@هشامالعلي-خ8م]

Good job how can I get one it's great

[@ridindirtyface]

Beautiful!

[@igorengineer]

Cool. I repair engines and make tools myself. I made myself a machine for grooving valve seats, it didn't work out as nicely as yours, but it works. But you are a real designer. Like definitely.

[@PaulXchannel]

Thanks

[@igorengineer]

@@PaulXchannel Hello, I made myself a tool for boring valve seats. I have a video of this machine on KZbin. Can you advise on how to improve it? This is my project. Here is the link to this video

[@igorengineer]

@@PaulXchannel kzbin.info/www/bejne/poK1dXeOZrp8mqs

[@igorengineer]

Good day. Your video was very helpful in making my new machine. I understand how your air cushion and air brake work. I am thinking of redesigning my machine. Thank. You helped me with the design.

[@juniormotosba]

@@igorengineer e teria como vc explicar ou mostrar a sua como funciona ou o que vc usou na sua máquina?

[@clevo351]

Paul how much runout on the seat?????

[@ЗаконопослушныйГражданин-э5ы]

Какой диаметр у магнита?

[@СергейКобылин-щ7ф]

3гпз это саратовский подшипниковый завод, Пол где вы его взяли?

[@Melamotor]

iya adalah seorang insinyur👍👍👍

[@hamzabouaziz1583]

Man!!! 19minutes passed like 5 Impressive

[@darylkesler8470]

You are extremely talented. and a well produced video, glad you showed up on my feed!

[@PaulXchannel]

Thanks

[@serjaly]

Paul, please tell, how work air brake🙏🏻 The air supply to the top washer through the annular piston presses on half of the outer ring of the bearing, right?

[@PaulXchannel]

Yes

[@serjaly]

@@PaulXchannel Please answer one more question. How is such easy sliding of the spindle and lower ring along the body of the lower cover achieved? Air supply and air cushion, or some other solution?

[@PaulXchannel]

air supply and air cushion

[@serjaly]

@@PaulXchannel thanks a lot🤝🏻😉

[@antonioteixeira2216]

Belo trabalho. Nice🇦🇫🚴

[@กิตติชัยศรีแก้ว]

เครื่องมือชิ้นนี้คุนผลิตขายไหม

[@kk-xn5pp]

genius and recklessness ... this you are🔝🔝🔝🔝

[@halfnelson6115]

Very impressive. Great work.

[@PaulXchannel]

Thanks

[@darkovasiljevic7670]

Are u intrested to sell all plans for that mashin???

[@kotborka]

Чего? 3-й ГПЗ))!Где ты их достал вообще?

[@mundodanivea9380]

excellent job, i would like to know how i do it and if i would be able to acquire this project

[@whizzo94]

Are the bearing that you used in the spindle angular contact?

[@mattjonesturbo1]

I love the attention to detail from a machinist standpoint.

[@PaulXchannel]

Thanks

[@murzul]

3гпз это Саратов?

[@juniormotosba]

Paulo vc poderia fabricar e vender essa ferramenta eu queria uma dessa na minha oficina, pra vc fica fácil construí é só copiar e vender veja essa possibilidade abraço do Brasil

[@tansangphan5849]

Cái Phot đó hiệu gì cho em biết được không anh

[@threexxxphat]

Awesome job !! Keep up the good work

[@carloscanaybatalla4438]

hola una muy buena maquina se podria saber las medidas muchas gracias

[@pavelpekny92]

Super pomocnik chtel jsem se zeptat jak mate resene vymenezi axialni vulena tom vzduchovem "zamku"? Diky za odpoved :-)

[@НиколайБочевар]

I have a similar homemade device.But I fix the tool with a nut.I really want to do it like you do.In any case, thank you for the videos and attention to subscribers.

[@antonioseclen.t7562]

Buen Trabajo ..Tiene costo la maquina y si se puede enviar a Perú..Gracias.👍

[@IanOberhotlzer]

Can you make a video going over all the tools functions and features in a complete video?

[@PaulXchannel]

Yes - Here kzbin.info/www/bejne/j5C1eYF4pq51r9k

[@Rojao]

Awesome, fantastic tool!!!

[@PaulXchannel]

Thanks

[@divyeshpatel7787]

What's aap nub give me this comny sir

[@oldschool1993]

Got your spanner nuts on backwards. the bevel goes against the the part to be sure of good contact and no burrs interfering .

[@СергейКлимов-в9ю]

Belisimo bravo

[@shirothehero0609]

You do the anodising in shop or did you send the parts out? Frickin awesome build!

[@PaulXchannel]

Thanks. Anodized in a specialized company.

[@zokagojakhmetova2958]

Какой номер потшиника вы используете?

[@serjaly]

Шс50

[@Nobody-ld7mk]

Nice but hard to compete cost wise with the Neway Cutter System.

[@romicateodosie7539]

Is it possible to order the manufacture of such a device with the workbench from you. anticipated thanks for the answer.

[@PaulXchannel]

Thank you for your interest. I don't sell.

[@gunggunglu2424]

佩服了 !👍你永远不会穷!

[@johnryan2193]

Love to see this kind of genius metalworking !

[@PaulXchannel]

Thanks for watching.

[@charlesdefrancisco5056]

Elegant and a beautiful design...where can I buy one

[@hobbyemcasa7863]

Excelente trabalho.

[@dimatokarilo]

Fantastic 💣👍

[@SRUmachines]

Hello 😊 Where your shop? Interest this product !!!

[@PaulXchannel]

not for sale