Making REAL Palworld Pal Spheres with Multi-Color 3D PRINTING!

Well this got out of hand quickly. I've been playing Palworld WAY to much lately and i figured why not abuse the advanced pieces of engineering technology I have just sitting in my garage! Cool? Cool! Lets make some Pal Spheres!
▼ MENTIONED IN VIDEO
3D Files | www.thingiverse.com/thing:646...
Orca Slicer | • The BEST New 3D Printi...
Bambu Lab X1C | shrsl.com/4bmte
Bambu Lab X1C AMS | shrsl.com/4bmtf
Bambu Lab P1P | shrsl.com/4bmtc
Bambu Lab P1S | shrsl.com/4bmtd
▼ SOCIAL MEDIA / CONTACT
Inquiries | bit.ly/3xQmgAS
Instagram | / frankly_built
TikTok | / frankly_built
Twitch | / frankly_built
Twitter | / frankly_built
Facebook | / franklybuilt
Reddit | / njtricker609
Discord Community | / discord
▼ SUPPORT THE CHANNEL!
Patreon | / franklybuilt
My Etsy | www.etsy.com/shop/FranklyBuilt
Frankly Built Merch | bit.ly/3AechHF
▼AFFILIATE AND DISCOUNT CODES!
ELEGOO| tinyurl.com/yvf6v6cm
☞ Visit Elegoo for my favorite FDM 3D printers, from entry
level to advanced!
CREALITY | bit.ly/3gV8iIo
☞ Visit Creality for a variety of FDM 3D printers, from entry
level to advanced!
EPAX 3D | epax3d.com?ref=25
☞ Visit EPAX 3D for my favorite resin 3D printers!
Use code “franklybuilt” for 10% off of E10 Series Resin Printer
DO3D | bit.ly/3zWo8tC
☞ Use Code “FBT20” at checkout for 20% off awesome
3D models and files!
AMAZON | www.amazon.com/shop/franklybuilt
☞ Visit my Amazon Store Front and explore my favorite printers,
filaments, build supplies and more!
SUNLU FILAMENT | bit.ly/3gXbSAo
☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!
Disclaimer- This video is NOT sponsored by ANY brands mentioned throughout. Honesty is very important to me and my channel- all thoughts and opinions mentioned are my own. This video is NOT sponsored by any of the other brands mentioned above or throughout this video. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!
Thank you for supporting me!
#3dprinting #palworld #engineering

[@Skully8998]

Love to see more people obsessed with Palworld 🤣

[@brendandawes9227]

These would actually also make sick Xmas tree ornaments

[@That_Stinger_GT5]

Complete palworld Christmas tree.

[@SamAnderson-un5fc]

I would want to see an eye of agamotto tutorial. I know you tried to do one 2 years ago but the footage was corrupted or something, so would love to see that.

[@3DPrintingKAN]

next up making pals to catch with them 😎

[@jntenglish]

To minimize the waste, set flushing to 0.60 and turn off the prime tower. No issues with any bleeding.

[@user-vl2xp8td4j]

Hey Frank do you think you'll ever make wolverines Cowl/Mask for deadpool 3 i think it could be a really cool build

[@augustsenholtvidebk4508]

I know this video is not about iron man suits but Its your newest video when i writed this comment. Since i was a little kid i was a big fan of iron man i allways dreamed about having a suit myself but i thaught that it was impossible to make one. Then one day i learned about 3D printing and i thaugt it sounded fantastic because i could just print my own iron man suit. I convinced my dad to buy one. We got a ender 3 pro but i quikly lost my motivation because i could not find any good way to print a suit. Then some years after i found your channel by an accident and you had some fantastic guides and now i have good plans on have to make a suit and i will start with at helmet tommorow. You have helped so much and i will keep seing your new updates about iron man suits❤🎉😀

[@TJ10033]

Absolutely love that Frank hope you are well mate 👍

[@JohnyBee013]

really cool timelapse. good music choices. Thanks for sharing your settings and how you used your slicer to set it all up. Thumbs up all the way!

[@MilesCorpening]

Those are so cool you should make electroplated ones

[@BigRigCreates]

I guess its time for me to pivot from Pokemon to Pals

[@angrygaragemechanic]

Thanks for giving us a view on how color painting in orca works 👍

[@Ducky-121]

you did such a good job

[@SuperYanhan]

Just printed some pal Sphere on my KE , not in two half but as one full sphere. 100% took about 16 hour and 60% is around 6 hours

[@qugonqeml8280]

Great video, I was just wondering what you ended up doing with your a1 because of the recall

[@dwaynem8015]

Nicely done 👍

[@Shaerky]

I love this channel you need more attention literally the creative father I never had

[@christopherhahn5616]

Nikko industries put out one that twists together. Also, to save on filament waste. Import an object you plan to paint later or don't care what color it looks like. Right-click object, go to flush options and select flush into this object.

[@FranklyBuilt]

Thank you!

[@micraftyworld]

Great Job!!!!

[@bigblue1287]

Looking good franky, Us Jersey boys know how to,make things happen❤

[@vynaltheworld4092]

This is so cool.

[@endaroche5804]

Could you do a full tutorial of how to build an iron man helmet from 3-D printing

[@joshuamccracken8994]

thanks for sharing this, printed a blue one!

[@schectera7xcustom]

Hey Frank, you can use magnets in the print to stick them together! Just dremel out a hole on the large diamond shape part on the rim. Thats what i would do, and you might be able to mess with opposite polarity ones about half way so it sort of spins into place lol But you're the seasoned professional here i'm sure you can think of something! I know you have a lot on your plate, keep up the awesome videos!

[@silentnobody1117]

Hey frank! I was wondering if you think getting a filament extruder is worth it, especially if let’s say I only have one printer and only 3D print just cool random stuff for myself. Not only that but which one is a good one for its price? 👀

[@danielmills3945]

I was wondering if you could do a tutorial on how you dial in your different filament profiles? Like what tests and models do you make and what order you do them in? I can't seem to find any good sources on how to do this, and waste a ton of time and material going back and forth between tests... I'm also at a very high elevation, so my filament and bed temps usually need to be way different than the recommended ones from the manufacturers... Any advice or resources would be amazing too! Love this channel and love the K1 Max you convinced me to get!

[@shashanktg08]

Nice video lot things learnt wish I had a bamboo printer to print like u did but I am still struggling with ender 3

[@mab4110]

Would love to see more resin builds.

[@Eryniell]

I want to see someone decorate their next christmas tree with palspheres now XD

[@TheMugwump1]

OK so you can weld PETG with that purple PVC pipe primer. The downside is the staining, but you can fuse the halves together and then work the seam to be flawless...then paint. It's an alternative to multi filament printing and with just a little(OK a whole lot of time sanding) time you can make it look way better than just a printed part.

[@austinleblanc234]

It would be cool to see Poké Balls printed the same way as those. Those like sick alone as a raw print!!

[@LisaHarsh]

Take it you made this before the recall? Cool project.

[@critter42]

Could you have saved time and filament changes by painting the inside of the domes blue (or whatever dominant color) also?

[@FranklyBuilt]

Oh true

[@Sniffe278]

So damn fire🔥 I can't even exist **combusts**

[@BLuNTEDR]

Booba armour.. I'm going to print them later but I'll embed magnets

[@Queue22]

Multi color is so cool. But I can’t get over the waste. I think multi tool machines like the XL are the way to do it to eliminate filament waste

[@calebmusick3877]

I think a good next project could be the Dragon Priest masks from Skyrim. it seems to be relatively simple but I haven't found any real tutorials plus they look really cool.

[@ThePongo]

Ya that’s so cool

[@amybarber347]

I saw your incredible workshop video. Wow! But I’m worried about your paint booth. I guess it’s the corpman in me. Please be careful frank

[@jrodbrown58]

@Franklybuilt I'm looking to upgrade my ender 3 that I've had the past 3-4 years to a new 3d printer, either a P1S or a Neptune 4 Max. I usually print smaller prints but there are a couple projects where the larger build area would come in handy.... What would you recommend? Thanks!

[@daniellongoni2360]

thank for posting mr built, could you make another big sword I love watching the sword builds

[@matthewheath45]

bro can you share what filaments you used?

[@Optikification]

I am quite new to the P1S and just got the AMS to so following your video again ;-) how do you set a P1S to show total print time in hours as mine says 1 day 34 minutes.

[@richi3500]

You should send one to Anderson, he doesnt know what pal world is but we do : )

[@Bean90]

I’m thinking of getting the P1S is it good or should I get another one? I want your opinion before I get it

[@proformairbornejumpropetea4197]

love palworld

[@Kenndrix]

one thing someone could also potentially do is, modify the two halves for magnets. they look fantastic!

[@mr.chiknflipr8517]

I've had a Neptune 3 pro for almost a year now and for the last few months when I try to print something it will have a bunch of small holes and terrible feeling edges and I don't know what's wrong or how to fix it because it just started doing that for no reason, do you have any suggestions to try and fix it

[@brianbrown4140]

Hello! You've mentioned in previous videos that you commissioned design for prints. I'm interested in doing the same. Do you have a specific person/site that you recommend? Thanks

[@TurtleEngineer0]

6:25 how did you make that logo on the P1S it is gorgeous!

[@markusmuckey1249]

Hey Frank i wan wondering what color you used for those Pal world balls my son went nuts and yours look absolutely amazing lol

[@exaltvideo]

How did you fix the edges lifting on the max? Reprint or did you sand them?

[@FranklyBuilt]

I reprinted it

[@Sargentdigitaldesign]

I met a couple today that was stationed with you I believe In Germany. I was selling prints at a card show here in VA beach.

[@spacedino9992]

do you only use bambu filament?

[@critter42]

Was this filmed before or after the recall?

[@FranklyBuilt]

After haha

[@crazeokc]

Palworld rocks

[@onurpekcetin7260]

ı have a elegoo nep 3 pro. I used esuns gold filament before but it was just yellow. What is a good filament brand for silver and gold colors? I dont want to use anything cheap and ruin my nozzle

[@liquidsh4d0w10]

Throw it at the back of someone 😊

[@Team_flint]

could you not use magnets to hold both parts?

[@TheYasyou]

Hey Frank, have you tried using Polylite CosPLA for your cosplay props?

[@FranklyBuilt]

Yeah I hate it

[@CityPlannerPlaysChair]

Which one catches people the best

[@georgegotjokes]

P1S K1Max A1AMS so many letters/numbers etc I have no idea what he’s saying but it’s fun to watch lol Crazy how he’s gonna make hella money off this just by taking a file online and pressing print with no extra work lol

[@wildb3rry343]

I love that game too, I have been playing so much and printed a palsphere as well

[@Yakafake]

6:04 What is your favorite printer then ?

[@3dprintingstuffiguess]

Video 2 of asking frank to make the t 64 power armour helmet (Edit: T 60, maybe t 45 idk 😅)

[@endaroche5804]

Could you do an akria yumming iron man that you 3d print

[@SneakingSneakers]

you should make the x-blade from kingdom hearts 3

[@aFishingRodMC]

How did u get the frankly built logo on the p1s

[@FranklyBuilt]

I printed it

[@aFishingRodMC]

Wow good job

[@TheCivilWarrior]

Hey frank I have a challenge for you now I want you to make deathstroke's mask from Arkham origins and try to get the carbon fiber look on the right side of the mask.

[@user-og7jk9yq7r]

How much

[@Nightmare-Snappe]

Can ANYONE HELP ME I’ve been having 3d printing problems I can’t explain so I made a short about it and I don’t know what to do

[@bencavazos3326]

can you do more iron man videos

[@cahms26]

Poop shoot 😂 Yeah... I'm a child

[@danbrit9848]

just lost my world of 150 hours ...always backup ...fml

[@BraxtonFerow]

My printer bed won't heat, anyone got any ideas?

[@daniellongoni2360]

hey again could you bild a pit droid from star wars episode 1

[@eyal_the_goat]

Bro I’m missing the helmet build video 😢

[@brendandawes9227]

Hey @franklybuilt for the leftovers have you thought of a recycler for the bambu poops or something like that? Based on volume you print maybe in the long run it might lower your waste costs? Just use recycled for things you're going to paint? I haven't got one because I hobby print. Example kzbin.info/www/bejne/eIWTZZqifKmdeJYsi=0IxJ3IXjXSN4w_mL

[@gabrieletrapani4449]

id love to see fnaf stuff printed

[@danbrit9848]

use magnets

[@user-hv9lm5tm3b]

a Babushka doll

[@Dragonaut72]

Can you make a fortnite omega mask that opens and closes like the ironman masks?

[@uujims3762]

Wasn’t the A1 recalled? Or is this after

[@ezunino1711]

sure, but a lot of people are still using it waiting for the replacement, not everyone is as paranoid specially when they've been using 3d printers since the early days when every printer was a fire hazard

[@Brandon-jf9cv]

The A1 had a recall it’s not safe to use

[@pauliman1098]

Clickbait- I can't capture my friends and deploy them to help me at my menial job.

[@eyal_the_goat]

First