Making Toys and Joys Dump Truck and Pup Trailer Part 18

[@troycogan1030]

Great start to the pup trailer Kenny. Looking forward to seeing the finished unit. 👍🏻🇦🇺

[@acutabove_woodworkings]

I hope you continue to enjoy it as the series progresses Troy. Thanks for tuning in to the show.

[@markduggan3451]

I'm glad that you have such a great audience that is willing to help everyone.

[@acutabove_woodworkings]

That's what make my audience the best on KZbin. It's more of a community than anything else. Thanks for tuning in this week Mark.

[@dutchypatterns2596]

As you told in this vid I myself made the Dump Truck in the past (2017). And also I did not understand the drawing about the rear spring brackets. At that time I fixed it in a similar way as you did. I looked at the drawing again after watching your video and came to the conclusion that the drawing not show everything. Perhaps the drawing is good, but all parts are not visible. Knowing that, I made the mentioned 3D drawing and hopefully there are people who can use it! THANK YOU for the follow-up to the dump truck. Hopefully you can get back to it with fresh courage. But whatever it is, enjoy !!! And at least but not last thanks for the link to my website. I'm for sure glad with it.

[@acutabove_woodworkings]

It's always a pleasure to promote your work and your site sir. You're very deserving of the promotion. Thanks for tuning in to the show and for your continued support of the channel.

[@paulsmessyworkshop]

Kenny, so glad to see you are back working on the pup trailer. You needed a break but I was going through withdrawal…lol. Great video this week and a good explanation regarding the confusion on the dump truck rear suspension.

[@acutabove_woodworkings]

Thanks Paul. I hope that you enjoy this series. The pup trailer is a considerably shorter series than that truck as most of the parts are just repeats of things we already covered in the truck build. Thanks for tuning in to the show.

[@bigsparky65]

Nice to see the pup trailer build is back on. Looks fantastic so far.

[@wiseoldfool]

It's looking wheely good!

[@acutabove_woodworkings]

I hope you enjoy the rest of the series. Thanks for tuning in this week.

[@MrSCOTTtheBADGER]

Enjoyable and informative, as usual!

[@acutabove_woodworkings]

Glad that you liked it. Thanks for tuning in and for the kind words.

[@marcelo403polo2]

Great progress Kenny.

[@acutabove_woodworkings]

Thanks Marcelo. Great to hear from you. Thanks for tuning in.

[@V1er1f1ed]

This guy is amazing yet so few views? Come on KZbin stop shadow banning this excellent KZbinr with shadow ban algorithms.

[@acutabove_woodworkings]

Thanks for the kind words. I truly appreciate it. I've been producing this channel since 2013 and I've refused to pay for subscriber services in order to boost my channel. The subscribers and views that I get are all genuine and with over 875 episodes of the show on the channel, I'm hoping that one day, my channel will just explode and who knows, maybe I can get that play button plaque for having 100,000 subs. LOL. It's good people like yourself that make this channel worth producing. Thanks again for your kind words and for tuning in to the show.

[@pdwoodwerkz9625]

Let start by saying that yes, I am truly excited to be back on the Dump Truck and Pup trailer build. Although I am not building this model (yet), I get so much insight and terrific advice from your work. And as you say, there is quite a diverse audience with many different outlooks and interpretations. Dutchy is absolutely one of the most charitable people I have had the pleasure to meet on this media. I have built 3 of his plans and on each, he has answered any questions I might have had or given me some insight on a jig that was needed. Like you, Kenny, he gives to us in a way that is enjoyable and concise and helpful. Can't wait to see the upcoming episodes and I'm sure you're anxious to get the builds complete. 180 hours on the truck is incredible. Thank you for sharing your knowledge and your time with us.

[@dutchypatterns2596]

May I use some text from what is written above on my website? ☺

[@pdwoodwerkz9625]

@@dutchypatterns2596 sure if you’d like. I’d be honored if you use it.

[@dutchy751]

@@pdwoodwerkz9625 BTW Did you see our numbers? 9625 (yours) and 2596 (mine)

[@dutchy751]

@@pdwoodwerkz9625 It's on my website

[@acutabove_woodworkings]

Glad to hear that you are enjoying this series. They are truly exhausting to produce and they are extremely time consuming as well. I couldn't agree with you more about Dutchy. An extremely generous and genuine person and that's pretty rare in today's messed up society. Any interactions I've ever had with Dutchy have been positive ones and his design skills are top notch. Thanks for tuning in.

[@davenewkirk1642]

Wow, what a great build. Thanks for all the instructions

[@acutabove_woodworkings]

Glad that you liked it Dave. Thanks for tuning in and for the kind words on the show.

[@scottmorris4914]

Nice video, good start in the build

[@acutabove_woodworkings]

Glad that you liked it Scott. Thanks for tuning in to the show.

[@DaPaVo358]

Made some serious progress on the first video. Looking good. I have this plan but have not made it yet. I really liked the forklift build from Dutchy also. It was really great. Sometimes the more you look at something like this the more it gets set in your mind how you are seeing it and just for the life of you can't seem to get that version out of your head. Will be looking forward for #2 video of the pup trailer. Thanks Ken, David

[@acutabove_woodworkings]

Glad that you enjoyed the show David. This part of the series is considerably shorter than the dump truck as a lot of the pieces are just repeats from the truck and there's no need to show it again. Thanks for tuning in this week.

[@barry.w.christie]

Nearly 25 minutes long and it passed in the blink of the eye ... fantastic as always 👍 With regards looking at things and it not clicking, been there, done that, and when you finally do click you can't understand why you didn't get it in the first place 🤣

[@acutabove_woodworkings]

Glad that you enjoyed the video Barry. Thanks for tuning in and for taking the time to leave your comment.

[@williambuckley1185]

Yep. definately a man of your word. back on the truck. Love watching you work. I have my laser and computer set up in my shed, but it has been too cold to do anything, do you think the cold will damage any of my equipment?

[@acutabove_woodworkings]

I think you would have to define "cold" William. Here in Canada, the temperatures get down to about -30 celsius which can be damaging. I don't think it's the cold so much as the sweat when the temperature rising that can damage the equipment. I keep my laser frames in the shop and the laser heads in the house to avoid any issues and so far, I've had none. Thanks for tuning in.

[@danweaver6445]

I looked on your web site under free patterns and did not find Dutch’s sachet? Did I just overlook it?

[@acutabove_woodworkings]

Oh my gosh, you are 100% right. I must have forgotten to upload it. I've corrected that and it is now on the website. Thanks so much for pointing that out to me Dan. I appreciate you tuning in.

[@danweaver6445]

Got the drawing. Thank you. I really enjoy theses model builds. Yes even these long series. They are great.