Making World's Smallest Gasoline Leaf Blower!

Рет қаралды 83,947

JohnnyQ90

Күн бұрын

Пікірлер: 177

@KhalidSCP Ай бұрын

Next vacuum cleaner with mini gasoline engine

@ilovelmg Ай бұрын

Just invert the turbine.

@init_yeah Ай бұрын

@@ilovelmgyou'd think that would work and I don't blame you but in reality it fails you have to design it like that from the beginning.

@MiniBikesAndGuns Ай бұрын

Just using the intake as a vacuum to pick up dirt and trash 😂

@Arhange1790 Ай бұрын

V8 vacuum cleaner

@ilovelmg Ай бұрын

@@init_yeah I'm just a kid who know A LOT about car, but has little to none knowledge about engineering or mechanic stuff.

@thaphreak Ай бұрын

Now we need a nitro powered pressure washer to clean the cars off after blowing off the driveway 😄 Very cool Johnny, thanks for sharing! oh and i *STILL* want your PocketNC :)

@ETKSauron Ай бұрын

Love this! My only comment....get some mesh screen over the blower intake so you dont accidentally get your fingers or shirt or something sucked in there. Otherwise, AWESOME

@Calthecool Ай бұрын

Imagine a motor that you could attach to different tools with a standard connection like a battery for cordless electric tools.

@122later122 Ай бұрын

Electric toothbrush with nitro engine 😂

@Modine. Ай бұрын

I just said that before seeing your comment. 😂

@122later122 Ай бұрын

@@Modine. Haha awsome 🤣👍🏻

@MoonlytSonata023 Ай бұрын

This is something that Colin Furze will make. lol

@MattTester Ай бұрын

Nitro dentist drill to then deal with all of the missing teeth it would cause.

@Sam-ob4of Ай бұрын

TheBackyardScientist already made it

@HolloMatlala1 Ай бұрын

Guys these are what is required in high schools where every child has access to their own engine to toy around on.🤞🏾🤞🏾🤞🏾🤞🏾.

@FokkerBoombass Ай бұрын

Glad to see heavy use of proper old school machining, it feels like everyone just throws 3D printing as a solution to everything these days.

@nautique1970 Ай бұрын

Superb engineering & amazing effectiveness! You’ve mechanical skills above & beyond. Thanks 🙏

@WisdomVendor1 Ай бұрын

I would like to thank you for not destroying your videos with unnecessary ridiculous annoying repetitive music. A very sincere thanks. :-)

@PenguinBrothers4LIFE Ай бұрын

KEEP UP THE WORK IM LOOKING FORWARD TO SEEING THE FINISH OF THE MINI V8!

@TheBakedPug2 Ай бұрын

ya know johnny, modern diesel electric locomotives are equipped with what's called an exhaust gas recirculator (EGR). it mixes a portion of the exhaust with the intake flow to dramatically reduce certain pollutants in the expelled exhaust, at the cost of some efficiency. would such a system work at nitro motor scale? or would it not really scale that well like trying to turbo nitro engines? would be curious to see if you could rig up some system for measuring exhaust pollutants. maybe just jam some cotton up the tailpipe?

@sluitermelvin Ай бұрын

not going to lie a pressure washer would be absolutely insane with a nitro engine

@natyone-1 Ай бұрын

I have gained a lot of knowledge by seeing your work. I also got the ability to do better, thank you.😊

@PenguinBrothers4LIFE Ай бұрын

Literally all I saw from the start was turbo strapped to motor and I thought he made a mini turbo for the mini car thing

@johnnyq90 Ай бұрын

😂

@PenguinBrothers4LIFE Ай бұрын

@@johnnyq90 I mean totally not hinting too you to make a turbo at all for the mini v8. *wink wink*

@ilovelmg Ай бұрын

@@PenguinBrothers4LIFEhe once made a SC, it broke because something bent.

@PenguinBrothers4LIFE Ай бұрын

Hmmmm I know at that scale mini turbos can’t do as much thrust as a low scaled supercharger per say but it still would be cool if he could even get a micro turbocharger that works even if it doesn’t provide a lot of power.

@adamr9215 Ай бұрын

@@PenguinBrothers4LIFEThe problem is the size. It has to be way too big to not be very restrictive. I do think it would be cool to see him build a few in progressively larger sizes until he finds something that does work, even if it’s too large to be scale. It could be an interesting series.

@Ist02 Ай бұрын

Best youtuber in miniature mechanic.

@Nico-ds9nz Ай бұрын

Haste super gemacht atze!

@aidan0244 Ай бұрын

Digga der arme😂😂😂

@joequashnock1552 Ай бұрын

Awesome work! Let’s see a gas powered margarita blender next!!

@homemadetools Ай бұрын

Cool little blower. We shared this video on our homemade tool forum last week 😎

@demonic477 Ай бұрын

it's been a while I missed the little projects like this it made me have to go back and watch a few of the other little projects like the little chainsaw I still love that one

@toyotatacomaguy23 Ай бұрын

Johnny man I love your work! That first mini nitro chainsaw was amazing... But this, this is literally insane!! Keep up the good work!

@Unlucky_831 Ай бұрын

11:31 bro just buy a tig welder

@superskullmaster Ай бұрын

I’m fairly certain the impeller has the curve facing the wrong direction for maximum suck and push.

@johnnyq90 Ай бұрын

If you check impeller pictures from actual blowers, you can see every posible design, forward facing blades, backward and straight.

@superskullmaster Ай бұрын

@@johnnyq90hence the “maximum” notation. Of course it will work in any configuration just like a flat wing will fly too, but not as good as an airfoil wing.

@alb9022 Ай бұрын

@@johnnyq90 Would you be able to design an impeller with less clearance? It could increase its performance noticeably without that kind of air gap.

@JazzbLu Ай бұрын

This is a very cool build! Love it!

@filipporossifavilli68 Ай бұрын

Next eletric generetor for tesla with mini gasoline engine

@PAINFOOL13 Ай бұрын

It's always great to see you ,Johnny . Way cool motor mods .👍🏻

@tonywharton5220 Ай бұрын

Absolutely amazing job 👍

@Jeevs900 Ай бұрын

watching JohnnyQ90 back in 2015 was prime

@parkerbirch5286 Ай бұрын

Fun to watch!!! Good job, thx!

@Modine. Ай бұрын

Now let's see a nitro powered toothbrush!

@RandomBogey Ай бұрын

12:08 That springy noise reminds me of the old NES Zapper

@lordphilbert3838 Ай бұрын

What sort of welder are you using?

@ragnarironspear1791 Ай бұрын

Brilliant as always 👍🏻👍🏻👍🏻🇬🇧

@doughester3086 Ай бұрын

Man you could make a plunger and I’d watch the video 😂 always love your stuff dude

@just.jose.youtube Ай бұрын

Always find this "mini" contraptions interesting. Imagine they had gas powered laundry machines back in the day... :p

@LILMADERR23 Ай бұрын

Ha! The motor isn't even stressed running the fan. It's almost perfectly designed!

@johnnyq90 Ай бұрын

Yeap, it just idles and does a pretty good job.

@courtneykensington8190 Ай бұрын

You should make a Chainsaw with the mini gas engine, but instead of a four stroke use a two cycle

@Physicus9 Ай бұрын

Dude, this is the most I think I've ever seen of you; you're more jacked than I thought. I've been a sub for something like 8 plus years I think. Just cool to see more of a person I've absolutely enjoyed watching for so long. As literally always, phenomenal video!

@gaspuppygarage3782 Ай бұрын

I noticed too! Never seen that much of him in a video!

@slode1693 Ай бұрын

Should probably make a guard for the blower intake.

@walter9724 Ай бұрын

I have a full size petrol two strole blower and a small makita battery blower that uses a 5amp hour battery and it is loads better than the petrol one. I can use it inside my warehouse without worrying about exhaust fumes and it is way lighter than a petrol one especially when i clean the leaves ofd the roofs of my farm buildings. Nice build but brushless powered is a lot more user friendly 👍

@dansattler882 Ай бұрын

design the blower housing with a small duct that cools the engine so she don't overheat

@PenguinBrothers4LIFE Ай бұрын

For some reason to me it looked like a turbo strapped to a motor

@PriyanshuV8 Ай бұрын

@onedoesnotsimplysayaname Ай бұрын

why dont you like to floor it on these engines, have always noticed that on all engine videos

@mark675 Ай бұрын

Mechanical sympathy

@alb9022 Ай бұрын

@@mark675 He's too nice to his tools and cars. Once it's broken in I'd be W.O.T lmao

@mark675 Ай бұрын

@@alb9022 😂😂

@tonydetwiler2624 Ай бұрын

i lean towards because there unbranded products we all know how that goes, best thing you can do is go easy on them it's pretty much all they can take

@diyking9k74 Ай бұрын

You should really give the “Chuanqi” engines a try especially the big V8 That can be fitted to a go kart that would be really cool. They also make a V12 engine with a four-speed manual transmission

@BITTYBOY121 Ай бұрын

I love it !

@winhackerz Ай бұрын

nice

@RoMiguens Ай бұрын

Haaa now this is way better, we have been waiting for something like this for a long time haa very cool project, watts next vacuum cleaner, a power jet a washer, rechargeable power bank let's go

@CuriousTR13 Ай бұрын

If this engine used in a generator, would be able to power an electric device like a laptop or TV? A mini generator to power those would be good idea, i think.

@Smallathe Ай бұрын

Super cool :)

@boyoung360 Ай бұрын

Anyone know what kind of welder that was? i haven't seen one like that before.

@Arhange1790 Ай бұрын

Spot welder, uses for welding thin metals. Thus metal will not overheat and will not burn.

@boyoung360 Ай бұрын

@Arhange1790 i know of spot welders but this one appears to be wire fed I've never seen a wire fed spot welder.

@spaghettilocomotive Ай бұрын

@@boyoung360 It is not wire fed, it's just a mini tig welder with an auto retractable tungsten electrode.

@flomojo2u Ай бұрын

@spaghettilocomotive Why would you ever want to bury the tungsten electrode in the work piece? That would just foul the electrode. Also, normally there's a gap between the electrode and the work piece for non-scratch-start welders. Just very strange, and doesn't look like it makes a strong weld.

@spaghettilocomotive Ай бұрын

@@flomojo2u I don't know, but if you watch you see that the electrode does indeed lose its point during the process. But that's normal for the usage in my opinion. There are three main ways to start an arc, high frequency start, scratch start and finally one that starts as soon as the machine notices that the electrode is no longer in contact, I's hazard a guess that this machine uses the latter in some form. It's basically the same as if I set my machine to 200A and hover the electrode over the workpiece and just tap the button, a quick blast to fuse the two parts together. Welding tips and tricks have shown this method in many videos as a good way to quickly tack things. I won't comment much on the strength of the weld, but I'm sure it's fine for what he is doing.

@M3NTAL-YT Ай бұрын

My farts have more blowing power than this contraption 💨

@johnkilo3 Ай бұрын

Now route the blower nozzle back into the carburetor

@theLyzhendricks Ай бұрын

Next could be mini mower or weed whacker

@pnz4aufsh Ай бұрын

Ill watch this later but considering that small handheld blowers are 25cc. 8cc is i huge reduction in size. Impressive work.

@survivalboy9597 Ай бұрын

Would love a nitro powered angle grinder build 😂

@Dane_Naraine Ай бұрын

Bro you should make a 4 rotor engine

@ihaveanunorigionalname Ай бұрын

lol he goes hard with 5 axis cnc 3d printing service lath taps bandsaws super nice super clean and dude gets out the grinders and a vice in the garage to cut a handle lollll

@TIGFab97 Ай бұрын

Your fan is like a water pump. Make it reverse to make much more air!

@johnnyq90 Ай бұрын

I did it. No difference.

@dgw815 Ай бұрын

what kind of welding did you use? Any links?

@hiredgoon4269 Ай бұрын

Argon spot welder. Link in description.

@pb_y43 Ай бұрын

First time seen that spot welder. 🤯

@f0x4nn3 Ай бұрын

Now make a WH40k chainsword with it.

@godlugner5327 Ай бұрын

GoW chainsaw bayonet

@ricardobosqui Ай бұрын

Extremely well done work but you did a serious mistake in the angle of the blower rotor. Should be in the opposite angle!

@diegoarevalo9136 Ай бұрын

It works very well even though the engine is at low RPM

@jacobboyington6606 Ай бұрын

gear ratio

@neongrau81 Ай бұрын

For a second I thought this video sucks. But boy was I wrong. It blows 🤯

@Prod.Datboi Ай бұрын

Pls get your hands on a “chuang li” v8. It sounds like a mini 427

@RHYSP-g2o Ай бұрын

🔥🔥🔥

@fabricationnation8052 Ай бұрын

While running oin the vise...it seemed like it had a bunch of movement in the crankshaft thrust bearing.....if it has a thrust bearing

@themudrunner417 Ай бұрын

What if, the blower was inverted and pull air trough the engine and cool it? Less power loss and better efficiency with only one fan.

@finleymakee4850 Ай бұрын

Johnny can you make a tiny engine powered human?

@johnnyq90 Ай бұрын

🤣

@dfgaJK Ай бұрын

Needs some intro music. I thought my speakers were muted LOL

@kevinperron5767 Ай бұрын

Yeah me too haha

@TH-bj1pb Ай бұрын

Rev limit it towards a windspeed measurement tool 😁

@instazx2 Ай бұрын

How well does that argon spotwelder work on aluminum? Seems to be doing well, but that would be my use-case for one ... not most of the jewelry options it lists. Tried mild steel?

@pks41805 Ай бұрын

"Honey, can I dust the house"?

@Techie_Justin Ай бұрын

I hope one day we will get a face reveal

@gabutmv9478 Ай бұрын

Hallo bro I from indonesia

@godlugner5327 Ай бұрын

9:52 [Citation -Needed- Found] can anyone confirm on impeller disks, facing the curve of the blades twards the direction of the outlet increases power. (Answer Below)

@godlugner5327 Ай бұрын

"The logic behind the backward bent blades is that the pumped medium has to slow back down from the rotation inside the rotor. This is most easily facilitated by the blades bending backwards since it provides a nice gradual transition from the high speed center to the slowly moving outside collection chamber. Eventually the medium has to go into the output flange and that is moving at the output flow rate, no faster, no slower. So such a rotor doesn't waste mechanical energy spinning the medium where it doesn't want to spin anyway. So then why are not all of them backwards if its so nice and efficient? Well it turns out that if what you want is high flow rate at low pressure (like a lot of air moving fans) the forward bent blades are better. They act as scoops to grab as much air as possible, get it up to speed quickly as possible and fling it out like a shovel. This lets the same size rotor create more flow rate." www.eevblog.com/forum/chat/why-is-the-curvature-of-pump-rotor-blades-backwards/

@alexjuarez1247 Ай бұрын

Yes take my money

@Kodi5204 Ай бұрын

I’ve been watching your channel for so long you kill it in everything but I think it’s time you learn how to tig weld

@PenguinBrothers4LIFE Ай бұрын

#AMAZING KZbinR

@4720bryan Ай бұрын

this is realy good ai

@vissymies Ай бұрын

hidden genious...

@DatBlueHusky Ай бұрын

i hate it how in the end you dont even give it full throttle

@Based_Dept. Ай бұрын

Is this required for the micro turbine engine build next?

@joshuagraber1148 Ай бұрын

Can you actually rev these little engines instead of tapping the throttle 50,000 times?

@Iowa599 Ай бұрын

If I need to paint a barn but don't have elecricity, how can I make that into a gas powered HVLP paint sprayer? 😂 maybe something like a carburetor on the nozzle, with paint in the bowl instead of fuel...

@uk_fishkeeping4437 Ай бұрын

Is it running on pure gasoline or a mix as it looks to small to hold enough oil efficiently, would love for someone to answer. 😂❤

@lordphilbert3838 Ай бұрын

Why use WPS if you're just going to make it a solid color? Genuinely wondering

@Liquid_Plasma Ай бұрын

Better at 2X

@David_Brinkerhoff93 Ай бұрын

Gasoline Punk

@edwardtaylor7047 Ай бұрын

Nice vid......by..mixed gas do mean 2 cycle gas? If that's the case,why would you use 2 cycle gas in a 4cycle?.4 cycle engines usually have a sump that hold the lubricating oil. Just wondering.

@urjaman0 Ай бұрын

From the specifications for the motor: "Lubrication Method: Mixed Oil Lubrication (Gasoline to Oil Ratio of 25:1)", so yeah it's a 4-cycle with full loss lubrication.

@edwardtaylor7047 Ай бұрын

@@urjaman0 wow! That's different,that confirms the fact that I'm from a different era.🤣🤣