Out of the Shop and in the Water - Supercharged Mini Jet Boat's Maiden Voyage!

It's time to get the supercharged mini jet boat wet for the first time before the cold weather sets in. Hopefully it doesn't sink!
👉Other Making Stuff Videos You Might Like:
YesWelder MIG PRO 250 Review - • YesWelder MIG 250 PRO ...
YesWelder MIG 270K Review - • YesWelder MIG 270K Rev...
Diy Tracked Vehicle - • Taking It For A Spin -...
Evolution Chop Saw - • Evolution 15" Metal Cu...
Cheapest Mag Drill on Amazon - • Reviewing the Cheapest...
Horizontal/Verical Band Saw - • DIY Metal Cutting Hori...
DIY Welding Cart - • Making a DIY Welding Cart
DIY Fab Table - • DIY Welding Fabricatio...
🔔 Subscribe to the Making Stuff Channel - / @makingstuff
📢 Making Stuff Patreon page - / makingstuff
🛒 Visit the Making Stuff Amazon Affiliate Store - www.amazon.com...
🌎 Vist the Making Stuff web page for more information, Plans, Merchandise and more. - www.makingstuf...
👉Thanks for watching!
(C)2023 TMI Enterprises Inc.
#makingstuff
#minijetboat
#jetboat
#jetsteareamadventureboats
#goodcontentgang

[@MakingStuff]

Nothing broke, nothing fell off and the boat didn't sink! Hope you like the video!

[@JaceWimberly-mp7sg]

What do you think about selling it

[@sixtyfiveford]

Awesome

[@MakingStuff]

Thanks!

[@In-My-Garage-Build-py6pc]

Bob thanks for all the great videos. I have a question on a previous build you did. You had mentioned on the track vehicle you would have enjoyed building it with a hydraulic motor system. If you don’t mind could you please maybe list the parts you would have used for that build? I’m having a lot of trouble finding the right size motors that would give speed and GPM ratio for a reservoir tank. Your input would mean a lot. Thank you again!

[@jimbarchuk]

Spoiler: "Nothing broke. Nothing fell off. The boat didn't sink!" The money shot: 2:47

[@elesjuan]

I'm not gonna lie... Two things come to mind. For some reason, your boat looks a little larger than the one or two other of these types of boats I've seent on youtube lately. Not saying that's good or bad, just an observation. Number two...... I can't help myself, but to think about the spare '06 GM L33 "LS" aluminum 5.3 V8 chillin in my garage sitting in one of these boats with a big azz turbo hanging off it......

[@MakingStuff]

It's a 12 ft Bucanneer not sure if Jetstream has made changes since I purchased the kit.

[@papgoodwin]

That thing is looking Great, Bob.

[@MakingStuff]

Thanks!

[@papgoodwin]

We'll see you Sunday.

[@jeremyoshea7941]

I would build a roll cage for that thing that is awesome

[@BIGWIGGLE223]

To hell with breaking her in easy! I was always told that ya break em in how you're gonna drive em. So, someone like myself with a heavy heavy foot, I break em in hard and put em away wet. Lol!!!

[@MakingStuff]

Right on

[@TqSNv9R0iG5Ckxew]

@3:12 Is that the Wisconsin Dells? Very pretty area!

[@HalfCutGarage]

Awesome Job Buddy! No excuses! You done good! I usually dont leave the trailer first water test so your ahead of the game ! Lookin forward to seeing you get some seat time!

[@MakingStuff]

Thanks 👍

[@peters7413]

Name maybe "SEEYOU"😉

[@procrastinator41]

No apologies, that was great!

[@MiniLuv-1984]

Great outcome. I can just see "Making Stuff" emblazoned on the sides of the jet boat.

[@kentuckytrapper780]

Alsome build man..

[@AmateurRedneckWorkshop]

The day we have been waiting for the boat gets wet. Good job there. Thanks for the video keep on keeping on.

[@MakingStuff]

More to come!

[@kuribotaichou]

Cool 😃

[@jorgeconcheyro]

Absolutely amazing job, I've been following it from the very beginning, thanks for the ride!!!. Cheers from Buenos Aires!!!.

[@MakingStuff]

Awesome, thank you!

[@procrastinator41]

W-0-W !

[@andyb7754]

Nice project, looking good. Can't wait until it's completely done. Hey, where's the life preserver in case something goes wrong? Here in MN you'll get a ticket from tthe DNR with out one!! LOL!! Keep up the great videos. Thank you.

[@MakingStuff]

It was in the floor of the boat. They are required here in TN also.

[@EddyJuancarlos]

muy buen trabajo Ingeniero videos asi motivan a uno a seguir con sus ideales

[@MoJoh20]

Congratulations on getting her in the water. I know how that feels to finally see all the hard work start paying off. Can’t wait to see the final results. Look forward to seeing the next step.

[@MakingStuff]

Thanks 👍 I hope I can make it look as good as yours!

[@NorthernFabandMachineLLC]

Congratulations 😅

[@MakingStuff]

Thanks!

[@finleycly]

Awesome! Congrats man! Hey, was that the Elk? I think I recognized that parking lot.

[@MakingStuff]

No it's the Duck.

[@finleycly]

​@MakingStuff Oh ok, we did a small part of the Duck this past year on our big trip. I have a video of it on my page. Jeremy, the guy who cut/resplined your drive shaft was with us. Whenever you get that thing fully done, hit us up! We're always looking for more folks to ride with!

[@MakingStuff]

@@finleycly I took it out for 3 hours this weekend to get the motor broke in. Yeah, Jeremey has helped me a lot on this project. He said there was a group going this weekend but I can't make it.

[@finleycly]

@MakingStuff Well maybe next time! I've enjoyed watching you build it. I'm chomping at the bit to build another one myself.

[@BleuCollarFndryMTL]

Great job, you've always been fun to watch. No matter what project youre working on. This boat project is ultra cool! Nice work!

[@MakingStuff]

Cool, thanks!

[@broketackle]

Can’t wait to see it on the water again. My buddy bought one and we are in the process of welding her up. Love your channel. Thanks for the knowledge and information brother!!! 💪

[@MakingStuff]

Thanks for watching!

[@MrGoosePit]

Wow. Look at her go! Congrats on an awesome job, and video series. I've loved watching the progress. Can't wait to see the finished product!

[@MakingStuff]

Thanks!

[@grosseileracingteam]

Nice job on the build. You might want to use a USCG approved flame arrestor instead of an air filter.

[@MakingStuff]

Thanks for the tip!

[@DktheWelder]

Looks like it works perfectly! Well done

[@MakingStuff]

Yeah, I was pleasantly surprised. I expected at least one thing to go wrong but it didn't.

[@lastshadow9351]

That's awesome and it looks great too! It's so small, I could almost imagine some sort of boat trailer system that's in the bed of the truck. Almost time to break out the personal track vehicle for some fun in the snow.

[@MakingStuff]

Yeah I got the boat done just in time for winter, lol.

[@Devtac-]

Is this the 12ft version?

[@MakingStuff]

Yes it is the 12ft Buccaneer, 2 seater with walk thru window.

[@thebobloblawshow8832]

Great stuff. 👍👍

[@MakingStuff]

Thanks for watching!

[@TaylorParks87]

good job man!. always fun to get them on the water the first time.

[@MakingStuff]

For sure!

[@jaredstone4490]

How much to build it?

[@MakingStuff]

Too much, lol!

[@dannymcintyre8132]

Very nice build , neat and tidy work , quality build , you should be very proud .

[@MakingStuff]

Thank you very much!

[@MrManushe]

thats awesome

[@MakingStuff]

Thanks!

[@iddddaduncan]

Amazing!

[@MakingStuff]

Thanks!

[@rodswim492]

Nice job Bob. I know you've been bittin at the bit to get that thing in the water and it looks like the time has been really worth it.

[@MakingStuff]

Thanks!

[@robbeckman6074]

Looking & sounding good so far, cgreat work👍

[@MakingStuff]

Thanks 👍

[@BaxterKaleb]

That thing is awesome!

[@davidbowman5195]

Nice job Bob! Looks great on the water.

[@MakingStuff]

Thanks 👍

[@All-in-RVing]

Awesome Bob!

[@MakingStuff]

Thanks!

[@MRrwmac]

Big Congratulations!!!

[@MakingStuff]

Thanks!

[@foxwood67]

Almost there. 👍

[@MakingStuff]

Just a little left to go!

[@mindthependulum6245]

Rock on, brother!

[@MakingStuff]

Will do!

[@williamlanphar630]

Good work man !

[@MakingStuff]

Thanks!

[@bonvilleelliott190]

Lookin' Good!

[@MakingStuff]

Thanks!