I would’ve preferred description and information rather than the music.
@Bakanelli2 ай бұрын
I preferred the music
@eugenetaljaard75683 жыл бұрын
I have had this machine for about three years now. Very happy with its performance.
@elbertdaguplo25923 жыл бұрын
Hi sir.can I ask?how much this kind of machine.?u say.u have this one.
@eugenetaljaard75683 жыл бұрын
@@elbertdaguplo2592 hi, I’m not sure where you are from. I bought it in South Africa.
@elbertdaguplo25923 жыл бұрын
@@eugenetaljaard7568 hi sir.im a Filipino.the land of many pacquiao. I'm far away from u.thank 2 ur reply.
@freddye32732 жыл бұрын
Where did you get it?
@jamesleicher2 жыл бұрын
cool bananas whats the hardest timber you cut?
@ranjeet2019 Жыл бұрын
I am from India sir I want to know if I will bring this for my shop then will any government license required to use this machine.
@gema18312 жыл бұрын
TOP! I think this will soon be my next bandsaw...
@colinbateman82333 жыл бұрын
All in all I think makita builds a good tool I’ve never had anything built by them that hasn’t held up well even with multiple users
@Motocicleiros3 ай бұрын
I bought one and am very happy. I am able to resaw 1/8" veneer with mine just out of the box.
@Bakanelli2 ай бұрын
Hi there, is the saw good enough to cut 25mm thick, 15cm wide plank in half to get two ~12mm pieces that are straight and can be glued together to get a 30cm wide plank in you know what I mean. Thanks
@Motocicleiros2 ай бұрын
@Bakanelli sure you mean a book match. The answer is yes. Just ensure that your machine is correctly set up (there are videos showing how to do this, and it's not any rocket science) and loaded with the correct blade. Never - ever - try to resaw with the thin 6mm blade as you just will screw the wood and get frustrated. Instead use preferably the wider 16mm blade that comes with it. In fact you can go OK with the 13mm too but the 16mm is specially designed for resawing so... Finally the most importantly, absolutely do NOT rush. Take your time and be patient. Don't try to go faster than 1mm per second, or even less, when resawing hard woods. Do not push your plank against the blade. Instead, let the blade do its job by barely touching the wood with the metal teeth without making any effort. You just have to conduct the plank forward gently till the end. Again, take your time. Maybe you will take 10 minutes to split a 30 cm plank? No problem, at the end you will have a great splitting. The problem when pushing is that if you do it so it may twist the blade and it will make the blade get out of the straight cut that you want. finally ensure to keep the wood always firmly pushed to the fence. Doing it, you will always get a perfect result. The only downside is that you will end up with those vertical saw marks all along the two halves so you will have to plane, scrap or sand it down. Not a big deal though. I am mentioning it because I already have seen very powerful bandsaws that can do the same job is a few seconds and they go so fast that it won't leave any mark in the wood, but such machines are so much expensive to worth have one in your home shop. I consider that the Makita LB1200F is today the best cost-benefit bandsaw for the hobbyist. But I am from Brazil and here we don't have a lot of options. Mostly we have several of those crappy desktop mini-bandsaws, then the Makita and then a Starrett that will cost like 3x more than the Makita and basically it's this. That's why I choose the Makita because this is the best machine that I can afford. If I couldn't I honestly would prefer NOT to have any bandsaw in my shop because I already had a couple of those cheap and small desktop ones and they really suck.
@Bakanelli2 ай бұрын
@@Motocicleiros thank you very much for the thorough reply! Since I don’t own a bandsaw or the table saw, do you think the table saw would be better for my purpose of resawing planks because it seems to me a lot faster? Thank you very much :)
@Motocicleiros2 ай бұрын
@@Bakanelli Well, if you don't have ANY saw and is looking forward to start equipping your shop, no doubt a table is the way to go. In fact I think it's the very first machine that any woodworker should get start with. Said that, a bandsaw shouldn't be on top of your priorities; and most important, you won't want to buy a band saw exclusively for resawing. A band saw is more suitable for intricated curved cuts and its ability for resawing is more like a bonus feature. For what you are in need a table saw can absolutely take care of the job. In fact, when I have to resaw (split planks) my first option is always my table saw. By the other hand you should keep in mind that in comparison a table saw is a too much more dangerous machine than a band saw and using it for resawing is a tricky task and I wouldn't advise a table saw absolute beginner starting doing such a task with one. You must be very used to operate this machine with regular tasks (ripping and crosscut) before trying to do some harder tasks as resawing wide planks. Also depending on the width of the plank you will want to use a jig. You said 15cm and it's not too much to cut without a jig and using the regular fence for who is experienced with a table saw but for a novice I think a jig is mandatory even for such a size. I don't know what type of work you do but it seems to me that your goal may be to split a plank and join it for making a guitar top. Also I don't know how much splits you have to do, if just one once in a while or several ones a day; but if you aren't in a massive production maybe it would be better to pay someone to do the job for you. IMO the cost-benefit would be way more worthy considering that beside the cost of a machine you still would have to deal with the learning curve (either for a table saw or a band saw). Furthermore keep in mind that no matter what saw you buy you probably will need a thicker planer (or a hand plane) - to not mention a stationary or strong hand sander - to mill off the defects of the faces of the split because it won't get out of the saw perfectly smooth; so more cost and more learning curve. I hope I have helped. Sorry if it seems that I am raining on your parade, but after to have taken some wrong roads in the woodworking world I know how frustrating the investment in machines can be. Nonetheless I would advise you to join to a good woodworking forum. I suggest www.woodworkingtalk.com/ there are tons of VERY experienced people there eager to help (I am part of the community myself - look for *yankleber*) and I have learned a LOT form their experience and advices! Good luck!
@Monkey_Snot Жыл бұрын
Wow does that blade ever twist and turn when resawing, you may want to look into that.
@c.a.g.19773 жыл бұрын
shees, that background music really isn't beneficial to a good viewer experience...
@encrust13 жыл бұрын
Great video. Your bright lighting shows the details of this machine more clearly than other videos. Really helpful, thank you
@saargh1055 ай бұрын
hi, thank you for this vidéo would you tell me if, three years after this vidéo, you still have this band saw ? and are you satified by this band saw? did you ever cut steel pipes whith this saw ? thank you for yours advices
@sherrykendrick17653 жыл бұрын
My nephew is head engineer at the Makita Plant in Georgia, USA and i get all the goodies.
@NKWoodworks3 жыл бұрын
Any chance we'd see any of their woodworking tools over in the states?
@gabrielerigoni5303 жыл бұрын
bravo bel video ho questa macchina gia da due anni e funziona benissimo taglia bene anche il metallo con i nastri giusti Complimenti Ciao
@thomasruhe34092 жыл бұрын
Ciao sarei intenzionato a comprarla anche io come ti trovi? Affidabile? Ciao e grazie
@gabrielerigoni5302 жыл бұрын
Ciao Thomas io mi trovo molto bene e' stabile e ha un piano di lavoro grande e pesante la consiglio!!
@thomasruhe34092 жыл бұрын
@@gabrielerigoni530 grazie per la risposta, come spazio d'ingombro, occupa tanto? Avendo un garage non tanto grande...come rumorosità come è? Ciao e grazie👍
@gabrielerigoni5302 жыл бұрын
@@thomasruhe3409 ingombra circa 70x70 cm e il rumore e' un po rumorosa forse si puo paragonare a un trapano ha le ruote e la puoi spostare dove vuoi
@JEE-ASPIRANTS_OF_KOTA3 жыл бұрын
first view
@ketapangkal-baraktifberbur65473 жыл бұрын
Hadir menyimak vidio barang ini 👍juga L 11👍
@ravimalvi21172 жыл бұрын
Yah machine ka price kya hai Mini machine ka price kya hai kripya comment Karke bataen
@Gobinath4u2 жыл бұрын
Does it come with 4 different blades? Could you please add a video or provide an information of what kind of blade should be used against different types and thicknesses of wood ?
@104Tomcat3 жыл бұрын
Looks like a great saw for me. Is it available in the U.S.? I've looked at Makita USA and could not find it. Thanks for the review!
@nainitalism2 жыл бұрын
You need to adjust your upper and lower guides , they are too far forward. They should be aligned with the gullet of the blade tooth. Other wise you will destroy your blade very quickly.
@腹我立造3 жыл бұрын
良い製品です。流石はマキタですね!
@bruamc2 жыл бұрын
Wonderful. Is there variable speed?
@youngdiy4892 жыл бұрын
It has no speed control unit.thanks for watching bro.
@bruamc2 жыл бұрын
@@youngdiy489 thanks!
@aadiycreation3 жыл бұрын
Nice sharing, thanks for your info bro
@petetongue65613 жыл бұрын
Music is dammed awful
@JasonkingGallo4 ай бұрын
sir pwd ko poh ba malaman kong saang atore mo poh nabili yong bandsaw mo..
@ramnarayanbanjare682 жыл бұрын
How much maximum depth of cutting and price.licence free or requirement .pls details show
@subashmallik47793 жыл бұрын
Bhai kitna price machine or kitna round ft cutting karega
@thomasdimaisip-ku6yp Жыл бұрын
Mayron ba kayong display sa manila
@hangthonglamra5332 жыл бұрын
Bohut accha h per price kya h sir delivery bhi karte ho kya sirji.
@manuelvaldes21503 жыл бұрын
Espectacular maquina, muy necesaria, cuál será el precio en dólares..?
@elihoungo45523 жыл бұрын
I need this machine
@rajkumarbanarjee48083 жыл бұрын
Benarjee farniture
@bogdaneusebiu28292 жыл бұрын
Me too 😊😊😊
@bernardoaguilar1042 жыл бұрын
ⁿ
@sunkaichan58352 жыл бұрын
@@rajkumarbanarjee4808 ,
@bhimbdr78482 жыл бұрын
@@sunkaichan5835 what's cost of mini makita band saw
@jamesleicher2 жыл бұрын
how hard is that timber at 8:16
@thomasdimaisip-ku6yp Жыл бұрын
Where can we find this machine and how much
@merusakhanparaprajapati79233 жыл бұрын
Very nice machine Good information thank you
@asrifahlevi15523 жыл бұрын
Nice information about this... Nice machine...!
@jameronggoy4477 Жыл бұрын
How much this type of band saw?
@Creative-art772 жыл бұрын
Does it cut iron?
@richardparry19662 жыл бұрын
Im assuming you mean steel, yes with the correct blade.
@Creative-art772 жыл бұрын
@@richardparry1966 Can you point me to its name or a link to buy it?
@deepchand24422 жыл бұрын
Very nice machine
@aparecidomiranda66373 жыл бұрын
Parabéns Ótimo videu 👍👍🇧🇷
@hoatranvan5407 Жыл бұрын
Giá bán lẻ của máy này là bao nhiêu vậy sop
@chandrarai56112 жыл бұрын
I need this machine. How to get I this?
@morso20093 жыл бұрын
Very informative and helpful 👍👍
@STohme3 жыл бұрын
Excellent video and a very beautiful machine. Many thanks.
@Jesusistheonlyway5493 жыл бұрын
Do you still like this machine?
@Jhunjhun-u7t2 ай бұрын
How much po so I can order I'm from Baguio Phil.
@josecahimat34843 жыл бұрын
i need this machin. how much
@jamesmwangi8223 жыл бұрын
Excellent.how much in Kenya?
@temjenaier4085 Жыл бұрын
How can you get this in India? Can anybody help?
@ttuaiteatuaitea80742 жыл бұрын
Ye machine kittina kimat he mujhe bata do
@ttuaiteatuaitea80742 жыл бұрын
Machine ka kimat bata dijiye Rs kittina
@dikaajiwibowo81732 жыл бұрын
bagus bgt..bisa buat belah kayu tua tidak ya
@SuaSahi11 ай бұрын
How much is your product?
@SuaSahi11 ай бұрын
I'm interested with your product.
@KingHenselt Жыл бұрын
Стоит как крыло от боинга ?
@bardmy3 жыл бұрын
What is max cut height sir?
@ftlangthanglien60832 жыл бұрын
How much price.i am like.
@qayimmisirxanov64673 жыл бұрын
👍👍👍👍👍👍qiyməti neçəyədir
@edgarmarzan98202 жыл бұрын
How much this makita bandsaw
@kuldeepkumar-iy1nw3 жыл бұрын
Sir price kya hai
@radheyshyamvishwakarma43653 жыл бұрын
Nice information but prices is not mentioned
@Сибињанинмитрос3 жыл бұрын
1000e
@sanjayumbarkar10553 жыл бұрын
Price ?
@gck7912 жыл бұрын
What is the price?
@anjulidas-lb2mw9 ай бұрын
Price kitna hai
@sodiqmuhammad64332 жыл бұрын
Joss 👍👍👍
@marcenariahobby7pallet3 жыл бұрын
Parabéns pelo seu ferramenta 🪚 🔧 nova gostei já deixei o meu like 👊👊👊🇧🇷👊💯
@afzalhosen14532 жыл бұрын
এইটা কোথায় পাওয়া যায়?
@deepchand24422 жыл бұрын
Prize kitna h
@mohdyousif9193 Жыл бұрын
band saw price
@klemorxhannel81163 жыл бұрын
your wallet so Powerfull😄
@ramratankumbhkar46692 жыл бұрын
Price bataye
@luizinacioduarte1227 Жыл бұрын
Como é a diferença dos nossos produtos que chegam em casa e a os de outros países, a gente paga caro numa ferramenta ou que seja outro produto e quando chega em nossa residência a embalagem tá toda deteriorada e eu sei como é feito esses carregamentos em carretas porque puxei muito a FedEx e vi alguns trabalhadores até chutando as caixas de mercadorias mais infelizmente esse é o nosso país 😞
@goldencarautoworks14902 жыл бұрын
Saan po nyo nabili mgkano po???
@lekikonkikondogoodfornagal2566 Жыл бұрын
Let us know the price
@solo88272 жыл бұрын
magkano and sino supplier nyo po?
@victorpalatic17503 жыл бұрын
how much sir..? im here in philippines
@livecricketeverytime94653 жыл бұрын
Praise kitna
@glowpipe2 жыл бұрын
I need this saw in my life... Completely unrelated! Anyone happen to know a bank with lax security systems?
@narvesinghbhura55452 жыл бұрын
मशीन की कीमत कितनी है
@asrullubis50432 жыл бұрын
Brapa harganya bos?
@Monkey_Snot Жыл бұрын
Mute people, Mute. Wtf were you thinking when you decided to use head banger noise? Dude?
@trongnguyen-md8te3 жыл бұрын
Gia nhieu vay
@babababa.g24992 жыл бұрын
price plz
@mundawati98242 жыл бұрын
Harganya berapa bos,
@kadetsuwoko39183 жыл бұрын
Regone piro lik
@asifhameed60673 жыл бұрын
Price ka ha
@mozza66662 жыл бұрын
Jesus turned off due to music
@surajghatekari73 жыл бұрын
Price please
@mohamedezzaiter5358 Жыл бұрын
Svp le prix
@ioannisandrianos16143 жыл бұрын
Its the best you can buy
@albertreed9663 жыл бұрын
JFC, that noise is irritating !
@juangalarza42573 жыл бұрын
Para Machala quien distribuye
@antonechanel2 жыл бұрын
Daya berapa wat itu
@MuhammadDaudkhanTV1003 жыл бұрын
So super
@ewinpranata15272 жыл бұрын
Music terlalu bising, Nothing testimoni
@chilebhotv23873 жыл бұрын
How much
@youngdiy4893 жыл бұрын
Around 800$ please search in google or online market.thanks bro.
@zekidmn21893 жыл бұрын
@@youngdiy489 bu ürünün bıçakla gövde arası kaç cm dır ve fiyatı nedir?
@ciprianokritzinger36363 жыл бұрын
Adding music to videos is becoming an annoying habit. Every video especially this genres I stop right away.