Manual 4wd, Sure 4, Ultimate Kit Installation on Brute Force

*PLEASE BEWARE THAT THERE ARE KNOCK OFF FAKE SURE 4 KITS BEING SOLD ON EBAY AND AMAZON!! THE ONLY REAL SURE 4 PRODUCTS ARE MANUFACTURED BY SGROI INNOVATIONS AND BRANDED UNDER KNIGHT POWERSPORTS PRODUCTS*
Flashing 4wd display lights? 4x4 actuator failed? Stuck in 4wd? Can't get out of diff lock? This product is your ONE time fix!! Bypass faulty electronics associated with 4wd and get manual, reliable, on demand 4wd! Be SURE your 4wd will engage when needed!
This video is a step by step installation of the Sgroi Innovations Ultimate Kit. This includes the Tank Lever, KEBC Delete Wire Harness and of course the Sure 4 manual 4wd actuator

[@millerworks3003]

My wife purchased this for me this past Christmas. I just got around to installing it. Let me start by saying I must have watched this video not less than 20 times before installing on my own. So I did everything as described. The electrical plug that is on the orange one wire was not long enough. I had to extend it on my 2012 by at least 10”. Every thing on that side of the bike went well. Then I moved to the other side for the differential cable install. That’s where things got time consuming. Getting the original cable off was not fun to say the least. I’ll attribute that to it being through mud and stuff since new. After removing the cable I had to modify the mount. The mount didn’t allow for the thread part of the cable to go through the slot. The slot was only wide enough for the cable. The hole itself was too small for the cable to go through as well. So I had to drill out the mount so the cable would go through. After that it was just a matter of getting my big hands in that tight spot to get everything finalized. After all that I got everything completed. I rode it around the next day and everything works as advertised. I’m writing this review so you can let other customers know that there may be some modifications needed depending on the year of the Brute Force they have. I hope this helps.

[@KnightATV]

Thank you for your feedback! If you need any assistance or have any concerns regarding installation or the product, please don't hesitate to reach out to us. We will be more than happy to troubleshoot with you.

[@millerworks3003]

I took my Brute Force out last weekend after installing your product. It worked just as specified. I absolutely love how it performs. I’ll have the video edited soon and will mention you guys in the video. Thanks for the response and if I need assistance moving forward I will definitely reach out to you.

[@KnightATV]

Thank you so much! Happy to hear you are enjoying the kit! That's awesome that you are making a video, whenever you're done we would love to post it on our social media channels if you are ok with that!

[@millerworks3003]

Just to be clear I didn’t make a video of the install just using it on the ride after. Of course you can post what ever I make. I’ll make sure to mention Sgroi Innovations and links to your website. I’m just starting out but once I reach the proper amount of subscribers I would be glad to do reviews for you guys.

[@Glock-1]

Man this is an awesome product, I bought one and put it on my 06 Prairie 700 and it is awesome well worth every penny! And Joe is awesome I called him several times and he was awesome he helped me every time I called, best customer service I have ever seen not to mention this thing is lifetime warranty! You can’t beat that!

[@markray8148]

What website did yall go to get this?

[@Glock-1]

@@markray8148 you will love this system I got the Ultimate Kit and it is so much nicer to know if you need 4x4 you just turn a lever and you don’t have to worry about any electronics going bad or not working. Joe and Sal are awesome people that really care about there customers and stand behind there products

[@waynevmax]

Just got mine today! Thank you for making this Hi quality well thought out product/solution !

[@SalvatoreASgroi]

Waynevmax Thank You Wayne😀 Ride Safely and Enjoy

[@TTavenier3]

Waynevmax got any videos of you using your kit on the quad?

[@SalvatoreASgroi]

Terry Tavenier III sure do Terry, many. Best is to go to our Facebook.com/sgroiinnovations page and see the dozens of videos, comments, and accolades 🤗

[@rickybailey7123]

He shows everything I would hope u didn't need to call because u didn't understand !! There is some people that should never touch tools so I guess I understand!!

[@ΚωσταςΑσλανιδης-ν2π]

Good evening sure 4 ultimate kit brute force 750i 2008 if you don't have the brain that snaps under the saddle what will happen if you snap only yours the relay will there be a problem?

[@KnightATV]

We responded to your email 👍 Thanks for reaching out!

[@backwoodsbiker6629]

I have a 2015 brute force, looking at getting this kit. Will it eliminate the limp mode problems i'm having. Thanks

[@KnightATV]

Awesome glad to hear! You can check out our kits here: sgroiinnovations.com/collections/kawasaki-brute-force-prairie-products

[@natureselement7588]

Note the prairie one of the cables is on the opposite side the ( diff lock)

[@KnightATV]

Mind sending us some pictures or videos?

[@charlesmorgan4636]

I need to know if what sizes will. surefour fit and model

[@KnightATV]

Hi Charles, the sure 4 fits every year, make & model!

[@fordman77881]

Also do u offer one with out the diff lock option

[@KnightATV]

Yes we do! Our base kit comes with a hand lever that shifts 2WD/4WD only. You would keep your OEM yellow lever on the vehicle.

[@fordman77881]

@@KnightATV ok I'm gonna end up with the other kit that has everything prob if I order it tomorrow or wed would I receive it by weekend

[@KnightATV]

@@fordman77881 We offer free 2-5 day shipping via USPS. To have it guaranteed by the weekend I would suggest using next day air or 2 day air via UPS. That can be selected during checkout 👍

[@fordman77881]

@@KnightATV ok sounds good cant wait to get it I hear nothing but good things bout it I'm in CT so I'm not that far

[@hartlandholloway8699]

Hello there I hope you can help my brute 750 died will riding it just stut off and can't start it back up what is the cause ?? I hope it's not going cost me lots to fix it ?

[@aretools]

I installed all of these parts but I’m having an issue with power and speed. I’m not able to go over 30 km/hr. I believe it’s because of the the delete kit. I have a 2004 prairie 700. Any advice will be helpful

[@KnightATV]

Hello! That shouldn't have anything to do with our kits as our kits do not affect the performance of the bike. It could be a carburetor issue or it's possible that when installing our kit a spark plug got bumped loose. I would start by checking those two things first. Let us know what you find

[@harebear1949]

very well done video I want the kit I will in time I have an 02 kawaski prairie 650 thank you for the video

[@SalvatoreASgroi]

Harris Brown Thank You 😊Glad You enjoyed the video. I'm sure you Will Love the product😇

[@charlesmorgan4636]

What I need to know what the sheriff for fit the models and the sizes

[@randyallen5972]

How do I get this kit bought and how much

[@KnightATV]

Hi Randy, here is a direct link to this product sgroiinnovations.com/products/brute-force-prairie-ultimate-kit?_pos=2&_sid=115c89ac0&_ss=r currently retailing at $474.98

[@HectorGarcia-eo1lq]

this video is amazing, thanks

[@KnightATV]

Thanks Hector 👍

[@durtysouthkustomz8862]

Wish this kit came with new bolts for the tank lever , because one of mine is stripped and have no choice But to cut thr head off

[@daivd417]

Is there a kit number for this kit I have 07 doing this

[@KnightATV]

knightatv.com/products/brute-force-prairie-ultimate-kit

[@GASSmallEngine]

Awesome video..

[@DerekRC]

For the 2019 is the 4wd box under the seat or elsewhere?

[@markray8148]

I need a website to purchase this

[@KnightATV]

Hi Mark, here is out website link! www.KnightATV.com

[@jamesleyden5853]

Viewing different replacement kits .not sure what I need.own a Kawasaki 360 4 by 4 ,2003 .been driving for a year by dis connecting actuator to get out of limp mode.during this time red lights were flashing regularity. Last week 4 by4 stopped working .checked around with motor running and while checking motor harness I descouverd engine would stall when I moved harness ., now motor won't start.put in new plugs ,no go .not getting gas on new plug .motor just turns over.checked plugs ,one up front blown ,can't buy replacement.help on harness needed to override electronics like actuator ( pretty sure it doesn't work )also to get 4 by4 hooked up manually. Waiting for your help. Also want to know if I can order others parts from you

[@SalvatoreASgroi]

James Leyden please call Joe at ‭[phone]‬. That would be best. He can explain all our products and answer all your questions. Sal

[@michaelapplewhite1923]

Waer can I buy this kit

[@rockytopvfl8350]

Will you be making a product like this for Honda??

[@Glock-1]

They have one now

[@fordman77881]

How much is that kit I have a 05 brute

[@KnightATV]

The Ultimate Kit is available on our website for $479.99 👍

[@fordman77881]

@@KnightATV ok I'll check it out I'll be ordering one next week

[@elgordovasca8370]

Will this fit on a 2005 kawasaki prairie 700

[@SalvatoreASgroi]

Sebastian Rocha yes it will😃

[@paulfox5339]

@@SalvatoreASgroi What is the reason for removing the engine brake actuator?

[@mrdee423]

@@paulfox5339 doesn't do anything but slow the bike down. Its only purpose is for going down hill and taking stress off the brakes.

[@sheldonferguson6702]

I got one and I highly recommend not getting it the actuator sticks and the thumb leaver is ridiculously hard to use. I wish I never got it :(

[@Ohiocountryboy-se2cn]

Probably have the cable in a bind

[@durtysouthkustomz8862]

Contact him and he will send you the new pieces to fix that issue new handles are spring loaded I had the issue too

[@griselaponte9637]

I WOULD LIKE TO BUY THE KIT, BUT I DON"T FEEL COMFORTABLE DOING IT MYSELF, ANY SHOP IN MIAMI THAT CAN INSTALL I?

[@KnightATV]

Grisel Aponte any motorcycle shop or small engine repair shop can install it. It takes between 60 and 90 minutes to do. As you can see this installation video is very detailed, and we are always available by phone if there are any questions. Over 1,000 of them have been sold and installed over the past 5 years. 👍

[@andrewgorges742]

This video is pretty misleading and makes it look so simple. But i just ordered this kit at 9am and am having it overnighted after watching the video and how simple he makes it look. So i started tearing apart my kids 4 wheeler and have spent the past 2 hours at the part where you have to remove the cable from the yellow cable but you dont show how to on video so its now been 3 hours i have been working on that. Pretty misleading and quite irritated a video with tool sizes and more in depth information would be helpful because this is misleading on simplicity.

[@KnightATV]

Hi Andrew, I'm sorry you're having an issue with this. This is an old video and we have an updated one on our website. Also you can call us anytime and we will walk you through it. 732-737-7761

[@KnightATV]

Here is a link to the 2010+ video kzbin.info/www/bejne/qZy2dGqEnqyGrassi=qPVRWhzMGiJEQZqb

[@andrewgorges742]

@KnightATV His is a 2005 not a 2010 plus. Ended up having to cut the cable out now can't get the bolt for the bottom of the cable out as there is no room to do that.

[@andrewgorges742]

Your video shows what bolts and cables to take out but not how to get any of such stuff out. So a novice like myself assuming everything just goes in and out easily and i can just follow everything you do step by step and as you know obviously that's not how this works.

[@KnightATV]

@@andrewgorges742 I'm not sure what part you are referring to now. Please call us, or text us some pictures. I'll be able to help you better over the phone. [phone]