Manual & Semi-automatic SMT placement

Manual SMT assembly from Fritsch

[@DanielPierce]

I love the dynamic guide hole that makes sure your putting the component in the exact correct spot!

[@nadabrainiac]

It only repeats the position you told it to go to. So you might put it in the right spot every time or the wrong spot every time. And it does nothing to control the orientation of the part. Extremely limited value and applications, considering the high cost.

[@ahav384]

great job!!

[@Deathbyfartz]

man this is the coolest toy i seen in a long time :O

[@aismtspareparts3073]

Great operation!

[@elliotth30]

With that intro - I thought I was about to start playing Ratchet and Clank on ps2

[@orsolyakomari8578]

Ilyen az,amikor az ember egyesül az általa megalkotott technológiával.Nagyon szeretnék egyszer ilyen géppel dolgozni...A jól kiválasztott zene a szükséges plussz!Proto termékekhez is egyedi kis darabszámmal gyártott PCB-hez is kiváló.

[@dineshrewari9216]

NICELY DEMONSTRATED

[@lapnguyenxuan8632]

Thank you!

[@MP-ui5qy]

Muito interessante. Nunca tinha visto placas construídas feita a mão.

[@WETDOGBR]

Sabes oq e' aqueles pontos vermelhos entre a pasta de solda?

[@JoJayO]

wow sir ur intro impressed me :D

[@user-vr9lg2ox3y]

очень хорошая машина для создания прототипов или мелких партий готовых устройств

[@phatman808]

When you wanna build boards like grandpa used to but everything is smt

[@RaoulLeDegueu]

c'est génial 👍

[@ECrackers]

Awesome!

[@EduardoSilva-mq5mq]

Bem legal ver essa montagem de componente smd

[@nubi9315]

Did you notice 3:35 wrong direction of IC mounting, it catched my eye.. 100% secure, yes)

[@EdwinvandenOetelaar]

good catch, you were paying attention. (like someone placing smd should have been doing) ;-)

[@fseeletronicos]

I did noticed the same. This machine needs to improve and solve this problem.

[@Dr.Stein99]

Or - not make a 100% claim gaurantee that no error will happen in the first 5 seconds of video.

[@pbkayakyer]

fseeletronicos © this is not a problem with the machine. The operator controls the position of the components as was demonstrated moments before the placement of the IC in question.

[@pbkayakyer]

Erich Stein the video did not make any claims that no errors would happen. It stated 100% SECURE PLACEMENT. Nothing more.

[@feintha]

My fear of SMT components increases.

[@MrAndri26]

Hi, for component in the carousel, how do you ensure the pick-and-place probe placed exactly in the middle of the component? it seems the guided hole did not take into account the offset of the position of the component when you pick it.

[@kinderwood]

I was curious about that also. Looking at the placement of the two ICs at 3:21 to 3:32 it looks like the guide pin gets you to the nominal part location but gives you some wiggle room to manually align while placing.

[@__-pg3so]

To integrate a general purpose common component placement arm set will be a good investment.

[@visicios]

Excelent!!!

[@peoplethesedaysberetarded]

Content starts at 0:23.

[@aamr9811]

😂😂

[@victabeer3960]

Very cool , I thought I was useless when components stuck to to the tip of my soldering iron .

[@bestbuildpc]

Amazing. So beautiful!

[@agstechnicalsupport]

Today SMT is is the technology in electronics and if quantities are not very high, this semi-automatic system is promising !

[@aismtspareparts3073]

How’s the accuracy

[@jahirosolar6840]

Excellent video @Paul Cooper, do you construct manipulators too?

[@rjordans]

So, do they also have a version for us are left-handed?

[@IvanFedulov]

Im also left-handed, but its actually pretty convenient to operate with right hand

[@okan1808]

@@IvanFedulov Do you have one? If yes what are the top 3 disadvantages you would count? Many thanks in advance

[@mounirabdallah6018]

Thankyou excelent video

[@ecofuelbox]

Fantastic tool ! What is the mark and viscosity of solder paste that you are using ?

[@Vik_ru]

Any can be used..

[@kenwood_9474]

Yes human.. Do my bidding! Assemble my brethren!

[@imho2278]

Beautiful

[@user-kc6lo6mb7h]

Great, and we have SMT whole line equipments, are you interented in it?

[@blindscience1919]

I would have loved to hear what you had to say. Since I can't see well enough to read it.

[@andreamodiano]

Excellent.

[@jonyzhu6531]

nice!

[@RakeshSingh-tz7mh]

Nice

[@igorovcharov7424]

Для предсерийной партии вполне хороший инструмент. Правда стоить будет как деталь от самолета. :-))

[@MarcosSilvaObel]

Nice man

[@randrianjafiniarivoandriso6687]

I like this machine

[@NguyenTam-zl2tk]

Intro video verywell. Where is link? Help me please!

[@user-jj9xh9ec1j]

WAW OK GOOD YES THANKE YOU THANKS

[@pavanbobade1114]

grate

[@issemxfi]

great solution for rework and prototype of high value products in high power electronics or medical or military or aerospace sectors.

[@user-zr9xr5is3d]

Fantastic

[@w888w]

I like this

[@denrudenko7724]

and what music track is playing?

[@imho2278]

Kf016901 universal mind...in credits

[@Rowow]

Why though? What advantages does this have over a automated one?

[@BMSworldNZ]

I'd imagine that this product level would suit those smaller businesses who cannot afford to outlay more than $150,000 on an automated pick and place machine - especially considering that that small business might already have the skilled staff on site, which makes the case for a serious investment in an automated pick and place machine even less tangible.

[@Rowow]

$150,000? Serious? You can get them for under 10 thousand or build one for a fraction of the cost.

[@BMSworldNZ]

Well admittedly, $150,000 was an assumed figure - and it's also very difficult to find pricing for an Industrial PnP machine. All the websites want you to sign up to get prices :E

[@joeambly6807]

A "real" business isnt going to DIY a pick and place machine or buy a 20 year old used one. Plus the setup times on many large machines outweighs any time advantage. Hence the niche for this machine.

[@Arterexius]

Joe Ambly >> Define "real business". Neither SpaceX or Tesla started out buying high end equipment right off the bat. I wouldn't consider either of them not being real businesses

[@AB-zh6lp]

I think, this one is also not cheap. Finaly a automated one is much more efficient. Before i use this i can also use just by hand.

[@Bianchi77]

Nice video, thanks :), where did you get it from ?

[@zgk_tech8130]

Amazing please must see this will help you and me both... @ Thanks...

[@jeetusolanki7]

How to solder them then palaced

[@ilhancoskun7632]

hello where can i buy this product ?

[@KeesHessels]

ssoo, what do i exactly gain by using this (not so very cheap) machine ?

[@julianreverse]

Speed and accuracy.

[@gkviluminacion6401]

maravilla

[@Alex-fh2th]

Нормальный полуавтомат... вот бы раза в 3 подешевле и можно использовать на небольших производствах.

[@stanza2762]

почему его все называют полуавтомат если все вручную ?

[@Alex-fh2th]

Потому и полуавтомат , а не автомат что без человека не работает...))

[@kwsa4657]

nice

[@rupeshvadoliya62]

Good job

[@spongedebfatpants1308]

Wow that probably takes forever.

[@a6dulsalam511]

woooow 😮😮😮😮😮

[@hellopandit9]

wow nice

[@mshakil8]

very nice

[@user-eh3bm3ip7e]

Главное не чихнуть.

[@sasa76564]

Bello

[@pushpendras_kitawat3539]

juki 2080l and fx-2,and samsung neo ,cp45

[@topgearIQ]

Cnc or manual

[@henrychan720]

Why?

[@CoquiAudio]

you know that tweezers and a big table cost less than that right?

[@UrBaNMCPaladinZ]

you know a donkey costs less than a helicopter right?

[@bachumiyamalik7490]

goods

[@civick2052287livecom]

I want one!

[@ashishsrivastav7326]

What is the rate

[@alexanderfederowicz]

At 3:37, it looks like component, "RIVX 55M" has the lower left first two pins soldered together as an accidental short ???? Hope I'm wrong... Honestly I would o with rectangular solder needle dispensers, as they might avoid such tragedies...

[@Graham_Wideman]

If the board is still being placed, then the solder paste has not yet been melted. When it is, the surface tension will easily pull the solder onto the pad. This is pretty standard in SMD soldering, and is part of the reason for the solder mask layer.

[@happyanimation8478]

It's price and availability

[@henryyang3695]

why the solder looks like glue?

[@strictnonconformist7369]

That is solder paste, not the kind you have on a reel.

[@casualuploads_h]

Sir Any place to work there. I like to learn and do works on PCB.

[@beutyfullmoments3425]

Wat is the price sir plz tell me i want 2 buy this 1

[@abeditani8293]

How much it costs approximately ? And where I can order it online

[@ProtonOne11]

you can get a quote at the fritsch website, but make sure you're sitting down before you open theyr email... it's probably around 15k€, soo, better go buy a simple but fully automated SMT placer for 5k€ in asia, do it completely by hand, or actually buy something else that is a bit more reasonably priced...

[@kieron8505]

3:38 IC is wrong orientation.. Potential flaw?

[@muhammadsajid6879]

How much ?

[@akhilsharma5214]

what is the price of this machine

[@user-dc3oi5rp2f]

كم سعرها. اريد عدد 5 منها

[@emirkayrak]

It's like an engineers wet dream

[@vinodpawar6175]

Super

[@safataqwa7514]

Hi respected sir video is very intresting thsnks a lot. Seeing this i m very happy

[@hayel2015]

😀😀😀

[@denrudenko7724]

Это чё за самотык?

[@alking7007]

how much?

[@editorialtakk]

Ramy a its not in your budget keep it up

[@shamsheertnrp4880]

Ramy a f

[@gxggao3039]

牛逼😂

[@__HJK__]

Если система видит на какой угол нужно повернуть деталь и указывает местоположение, то я не понимаю почему ее не оснастили дополнительными четырьмя двигателями, а на человеке оставили только инспекцию If the system sees to what angle the part needs to be turned and indicates the location, then I do not understand why it was not equipped with additional four motors (moving + rotation), and only an inspection was left on the person

[@user-si4tq2eb5p]

Это лучшая система ручного монтажа.

[@mustafaismar]

How to buy? Does anyone have any information?

[@qasimlove2226]

Where from you are Mustafa?

[@ambermishra2767]

Ye masheen kitne ki he

[@shivakumaracharya2028]

What is the cost of this machine

[@MirandaEartherCaller]

by the time you set that up you could build one by hand easy, if your gonna do volume just get the pnp, does't need to be a fancy one either, get a used one with a few perks and warranties. You could modify that setup and make is faster by using a microscope and a mouse controlling the placement wand instead of this non-sense.

[@TrumKS]

intro dữ thiệt

[@Infinitesap]

How much does it cost?

[@Smthelping]

we have a full auto ,if you need ,Please contact me: [e-mail]

[@fhellak8847]

I need a full automated one.

[@Smthelping]

we have a full automated

[@Smthelping]

if you need ,Please contact me: [e-mail]

[@abbasi5757]

کاش میشد تو ایران هم به این وسایل دسترسی داشت

[@maxdyupin2735]

за 15к евро я и руками пособираю без проблем.

[@aleksandrgalkin7669]

NeoDen4 полностью автомат, за 10к$ взяли, а тут каждый компонент вручную выставляешь....

[@stanza2762]

Ну а если одна плата нужна только ? как на автомате ?

[@maxdyupin2735]

прототипы и собираю, ставим шарики 0,35 и все, вплоть до 0201, и правлю после вот таких машинок

[@916363]

По видео видно как некоторые компоненты криво встали. не вижу сложности сделать полностью автомат, который даже при штучном производстве сделает все точно. Какая разница, если здесь позиционирование все равно идет на автомате. Подобные машинки не сложнее лазерного гровера на ардуино. Ну, или немного сложнее. Вся проблема в грамотном ПО, но и эта технология уже далеко шагнула вперед.

[@invisiblealex007]

я вообще подумал что первую палату ты руками записываешь движения и перемещения, а дальше робот копирует эту последовательность. Так делают все автоматы и сварочкики))

[@beutyfullmoments3425]

Tell the price plz

[@kingtout1000]

How much this ?