Manufacturing Process of Hammer In Small Indian Factory || Forging of Hammer

[@davidh4514]

Somewhere else in pakistan someone is making rebar out of knackered hammers.

[@polishedturdspeedshop]

Brilliant!

[@anilpatel1398]

Very good information

[@amazingtechnology11]

Thanks

[@LanoSilva-bv6nd]

Esses produtos fabricados aí vem pro Brasil ou não e só suas cidades mesmo

[@orionoutdoorsandworkshop5617]

it must be so comfortable to work with sandals on. 5:29. every one of these videos show how these people have to work in unsafe environments to feed themselves and their families. no insurance, no retirement, just a life of trying not to get hurt/maimed every day. pitiful. in the u.s the end of the line for junk steel like this IS rebar.

[@albertolambach5395]

Inglaterra y EEUU saquearon a la India y a docenas de países, condenándolos a la pobreza y el hambre.

[@dennisyoung4631]

You’d think they’d use a simple carbon steel rod with added manganese and silicon, say about 1/2 % carbon, 1.5% manganese, 1/2 % silicon, then “oil quench” at the end of the forging cycle, followed by a draw warm enough for long enough to bake the oil residue into a blackish finish for the metal. (Small amount of linseed oil added to the quench bath, that or a separate dip after quenching) This is a relatively *cheap* alloy steel, by the way - a lower-carbon version of 9260 steel. The result would be very tough and wear-resistant. This would give a *substantially* better hammer head at *minimal* added cost and effort.

[@cobre7717]

A lot of the choices and decisions of metal stock is whats available locally there. I don't know what steel is shown in this particular video but Some places make rebar from plate from local ship breaking outfits. They take the plates off with oxygen Lance torches at the beach then take the steel plates inland and shear off sections heatit up and send through a rolling mill with a bunch of dies and finish with rebar dies. So yeah ideally a great alloy it may be for hammers

[@nance64]

Some processes shown over and over and over, yet the grinding of the head and claw not shown at all.

[@StihlRunnin]

Let’s be real here, it’s a bench grinder. I’d bet my last dime.

[@rkm9749]

Hammers made from scrap metal are always scrap

[@AlRoblesTV]

Class B or C .Class A if it came directly from mining company

[@Lele-my9cp]

O ferro se reciclado muitas vezes perde a qualidade

[@honkie247]

Rebar is probably the cheapest grade of steel available. There is no blending of steels to get a certain characteristic or sampling of raw material to arrive at a desired end result. You have hammer heads that may split from being brittle or peen outward from being too soft.

[@chapiit08]

Rebar can be heat treated if dunked in brine when yellow hot, but yes it's not the proper steel for a hammer head.

[@cobre7717]

This is not true. Most rebar is used in bridges skyscrapers and dams. Its highly controlled and made to very specific specifications made by engineers and codes.

[@honkie247]

@@cobre7717 And there is no mention WHERE the rebar came from.

[@cobre7717]

@@honkie247 just because they dont mention what material is being used in the video... you assume its the wrong type. Very few videos on KZbin have any mention of material type.. they gloss over that information. Did they say in the description what kind of electricity was being used.. do you think that is incorrect as well. I can see this rebar has a stamp in it. I can't read it but that stamp has the relevant information such as alloy type and size. Also this isn't being made into bearing for a hypersonic jet engine. Its a claw hammer.. even the worst grade of Rebar is suitable steel for a claw hammer. If the steel can be forged into a hammer without falling apart or cracking everywhere its great. It just needs to drive a nail in. This hammer doesn't need to be hardened. Its just a claw hammer. As long as the claw is bigger than the nail it won't bend.

[@cobre7717]

@@honkie247 the rebar was most like reclaimed from train rail or ship breaking. That is very suitable steel for reclaiming much better than most mild steel or a36 structural steel available at a typical steelyard.

[@greggminkoff6733]

Rebar is made from scrap steel. There is no heat treating. It is not forged. It is a low carbon flexible steel made from scrap. To make a quality hammer, the steel should be: high carbon, heat treated and then forged.

[@cobre7717]

You don't want to use high carbon steel for hammers. You want medium carbon or mild steel depending on the hammer. Some hammers are made out of bronze, brass copper and even lead. A fully hardened high carbon hammer is unsafe to use. The more you use it the harder it gets from workhardening. Eventually it will get so hard it will become brittle and shoot shards of hardened metal off into your body. Lastly You don't heat treat before you forge. That would be totally pointless. You heat treat after the forging.

[@cobre7717]

Most Rebar is not made from scrap. It has a highly calculated specification for it's mechanical properties to be used by engineers and codes and inspectors. Most rebar is heat treated. You think the bridges skyscrapers and parking structures are just are thrown together with random materials melted down from costum jewelry? Rebar is indeed forged there is no otherway to make it. You think they cast a 1/2 inch thick piece of steel that is 50 foot long? Rebar is forged through dozens of dies and rollers. Some rebar is manufactured by reclaimed steel, such as ship anchor chain, steel rail and ship hull plate. Those types of steel are reforged into rebar. It is mostly allowed to slowly cool down so its in a semi annealed state meaning it isn't hardened so it retains more flexibility. It isn't scrap. Its used for less demanding concrete work. For small buildings projects.

[@TyroneBrown-mz9qi]

Worked for Iowa steel and wire. Rebar is bottom of the barrel shit steel with a specification.

[@WXUZT]

Just my thoughts. Thnx

[@jamesbond-db9fd]

Ladies and gentlemen welcome to TEMU sweat workshop 😅

[@abhisheksharma4097]

Bhai company ki address to do jo ki purches kar saku

[@fadilalek7781]

Cek harga perkodehnya bosq

[@davidlagle9379]

You can double your production speed if the second forging dropped to the far guy. He could load the second run while the first guy feeds a new one at the same time.

[@dennisyoung4631]

You’d think they’d toss the finished forgings in brine?

[@tima7763]

That’s how my great great grandfather made stuff in the late 1800s

[@amazingtechnology11]

@Dr.Kraig_Ren made in India

[@jpcaretta8847]

Not at all ! Hammers made in the West were of high quality. High carbon steel pieces soldered to bothe end of a soft steel midle block then tempered ! Same for chisel...

[@TruthIsLove.]

I would be interested in knowing how much these workers are getting per day, and whether or not it's even more than a dollar? And where I could send a donation to these workers individually to make up for the sin of taking advantage of the eastern worlds current position in working this way for the western worlds greed.

[@RajitSunderani-k8w]

your gonna fund one billion indians? just be quiet

[@TruthIsLove.]

@@RajitSunderani-k8w excuse me, if you tell me to be quiet again, I will report you for hate speech. What I said is true, and what ever excuses people have for doing nothing about it isn't for me to listen to

[@americansupervillain4595]

@@TruthIsLove. How is telling someone to be quite hate speech?

[@TruthIsLove.]

@@americansupervillain4595 if you can't answer that yourself, you're clearly not interested in having a relationship with your own conscience and far more interested in justifying your own unloving behaviour

[@MmmHuggles]

Every hammer is made using a hammer. There is an unbroken line of hammers dating back to when the first human beat metal into submission with a rock, the first hammer.

[@ducomaritiem7160]

Mmmm❤ that's a real philosophical approach 😊

[@flaminmongrel6955]

lmao "beat into submission" with that profile pic and name is hilarious.

[@StihlRunnin]

Still African guys working that way right now.

[@madasamyramasamy6297]

This is not in india....selection of raw material is not good....

[@FrankTedesco]

it's Pak

[@jameelattari157]

Its in India

[@amazingtechnology11]

No

[@Nexusof91]

this is India i too had visited a factory like this in Delhi 5 years ago... Indian and Pakistani factory conditions are the same in every aspect....

[@Khofnaakgaming01]

Ha bhai loha hard nhi h

[@PastorJoseCamachoduran-sx4re]

Saludos desde República Dominicana

[@markjohnson4962]

Cripes. Nine cycles of removing the flashing and punching the center hole.

[@kevincase6202]

Ha ha those are the hammers you see at dollar tree for 99 cents and fall apart the first time you use them junk

[@davidhamm5626]

The 99 cent ones are cast metal....

[@christianvalenzuela225]

This hammers cost a fraction of other more " perfect" hammers. This is an undevelopped country.... people cant afford expensives long duration hammers Workers are smart and efforced... my respects❤😊

[@stevo68]

Depends on what you want out of it I suppose. Some of my hammers cost me around 4 to $500.

[@Harishmeraz1164]

​@@christianvalenzuela225t😮😅 ko nahi uuh u

[@TROdesigns]

Half the comments on these videos are westerners talking shit on the manufacturing - they get the job done!

[@prasadrajadhyaksha2887]

दो मिनट का व्हिडिओ सात मिनिट का बनाया.

[@amazingtechnology11]

Ok

[@yuriytopolevskiy9016]

Все делается из арматуры - от сверел до молотков

[@ProcessMastery86]

amazing

[@ikosparintis8742]

🤝🤝🤝🤝🤝👍👍👍

[@orangediablo]

All that could be shown in under 2 minutes.

[@TAKFAMILY_CBI_NEWS]

Nice performance

[@paulmark992]

5:10 this can go wrong in so many ways.

[@michaelleong2582Quartermaster]

Rebar metal are not suitable for hands tools, There should be some international standard in manufacturing of Tools.

[@markjohnson4962]

1000% agreed. Too many repeated views.

[@amazingtechnology11]

Thanks

[@shortsmh1233]

Address kya he company ka ​@@amazingtechnology11

[@Kuhumbuwa-h8n]

Hey 👋

[@marcosantoniocava5794]

Nossa sem capacete, luvas , chinelos ao invés de botas e óculos pra proteção , o índice de acidentes deve ser alto nesse país.

[@ronaldanderson6481]

the claw on a hammer is almost obsolete in the US

[@monsuralrizver5717]

They are should focus worker safty.

[@RajitSunderani-k8w]

speak english sarr

[@paulmark992]

I don’t think that these people care about optimizing production processes. The product needs to be as cheap as possible.

[@RajitSunderani-k8w]

and as shitty as possible

[@sydkibweterer2719]

I am thinking why not melt the iron bars in a foundary and pour the molten iron into an hammer head mold and finish it from there on, less process 😊

[@davidhamm5626]

Cast iron is too brittle for this use.If you hit an engine block or cylinder head , with a hammer, you will see what i mean.

[@cobre7717]

​@@davidhamm5626 well yeah cast iron is brittle but why not just melt some meteorite iron with a little 24k gold for added toughness and luster. That would work good. Just melt it in a cast-iron stew pot over a camp fire then pour it out in a open mold like on... game of throns it must be how you make metal things. I saw it on the tv

[@davidhamm5626]

@@cobre7717 Okay.....

Cast steel

[@cobre7717]

Its a lot less process to reforge a piece of rail steel or chain steel or any steel than to cast a steel hammerhead.

[@imranKALO1Punjab]

Nice

[@amazingtechnology11]

Thanks

[@MARCELORODRIGUESMG-UBA-BRAZIL]

👍

[@UDINTROPHYCHANNEL]

Good"

[@amazingtechnology11]

Thanks

[@iveter999]

это плохой молоток

[@stiveandersson-w8s]

جنون

[@stormytempest6521]

HEALTH AND SAFETY ANYONE ? DEAR ME.

[@mfhmxx]

this imposible...this not india india only hand no Machines..

[@ravindradaundkar9905]

Folks its from Pakistan.

[@sagarsaraf821]

This is not indiam company.

[@RajitSunderani-k8w]

yes it is, dont u see the pile of turd in the corner

[@JohnDoe-es5xh]

The droning in the background sucks.

[@prasadvn524]

This is cheap quality hammer mafe out of TMT steel bars without any quality checks

[@dejamehablar1984]

You call this "amazing technology"?

[@Alexander_8612]

Кажется кто то зря портит арматуру.....

[@amazingtechnology11]

👍👍

[@habramtorrealba792]

Fundaciones y resumen academicos del pais torrelukistrae

[@salvadorgaleano8510]

Beleessa

[@danielserrano591]

jed

[@sanjayakumar3695]

Not good quality iron

[@danielserrano591]

pay roll

[@hasmukhlalshah9513]

this is pakistani

[@amazingtechnology11]

Indian

[@buckfiden2988]

Those are garbage.

[@WXUZT]

Most likely Pakistani, not Indian. Hammer head is best made from medium to high carbon steel which has to be heat treated later. Please don't post videos which spread misinformation

[@HorseMalone]

Cheap rubbish.

[@DEGENEBABA]

😂

[@ComradeReally]

Непонятно, зачем арматуру пустили на молотки, когда из неё можно строить дома

[@ЯромирПрокопьев]

Ну потом с помощью этих молотков и будут строить

[@ramprasadsarkar4435]

Is company ka name or phone number di jiye me parches karna chati hu

[@amarjeetsonker4443]

Aap ki factory kahan per hai aap apna mobile number send kar