Hello, does anybody know, where to get the x5 gimbal mounting plate?
@tracybrislin9 жыл бұрын
absolutely excellent placement of camera and parts for demonstrating replacement parts! easy to see and understand each step , thank you!
@MarionvillemodelsMultirotors9 жыл бұрын
Thanks.
@coreysnipes3 жыл бұрын
Great video! Clearly explained with a dash of good humor.
@ryanashby24592 жыл бұрын
Great video. I do have a question I hope you can help with. I have an Inspire 1 and when I turn it on all the lights are green but the gimbal doesn't do it's little dance and the controller will not connect...
@mikemaheno32334 жыл бұрын
Thanks for getting back to me, so quickly. Do you know the length?
@MarionvillemodelsMultirotors4 жыл бұрын
Mike Maheno not sure. They were stepped.
@ianfrench1984 жыл бұрын
Hi do you know where I can get a balance ring for the inspire 1 X5 I'm using is the 14 to 42 zoom lens
@mikemaheno32334 жыл бұрын
Excellent video. I've had the Inspire ! for 4 tears and just made a move and purchased an X5 camera. My adapter did not come with the 4 screws. Could you let me know the screw size needed. I'm guessing M2x6. Thank you.
@MarionvillemodelsMultirotors4 жыл бұрын
Mike Maheno I think they are 2.5mm
@mikemaheno32334 жыл бұрын
As a follow up/ The 2.5 X 8 screws worked perfectly. Thanks again.
@MarionvillemodelsMultirotors4 жыл бұрын
Mike Maheno nice one.
@eduardongc5 жыл бұрын
Hello friend, excellent video, I have an Inspire 1 Pro with X5, the gimbal levels, records video on the Micro SD but does not transmit video to the application, I also see that the LED of the camera is always red. Would you know what could be happening? Thank you
@MarionvillemodelsMultirotors5 жыл бұрын
Eduardo Gonzalez it could be the cable that runs from the gimbal mount to the flight controller. You’ll need to take the nose off the craft to get the the other end of the cable.
@elvisbest32134 жыл бұрын
i need to buy this kit im in the US
@dhardjono9 жыл бұрын
do you need to put the leg extension my box will not fit with those on . it look's like it just cleared the table on flat surface.
@MarionvillemodelsMultirotors9 жыл бұрын
You have to cut the foam for the leg extensions. I think if your on soft ground the camera would touch without them.
@dhardjono9 жыл бұрын
+Marionville Multirotors hanks ! also help full video
@uptowndisco29 жыл бұрын
Ricc the X5 mount looks like it would be a good upgrade for the X3 camera to stop so much side ways wobble ?
@MarionvillemodelsMultirotors9 жыл бұрын
+uptowndisco2 This has been mentioned but as the X5 is heavier you may get jellow with it being stiffer but its not something ive had experience with.
@TedByrne688 жыл бұрын
Nice vid, thank you. Would you recommend simply buying a Pro over purchasing a new V2 inspire (X3) and eventually upgrading it with an X5 ? In other words, would they basically be the same craft afterwards? I ask because the upgrade path is the cheaper option where I live (Switzerland), since a new V2 can be now be found for a very low price.
@MarionvillemodelsMultirotors8 жыл бұрын
I still use theX3 so good to have both cameras.
@TedByrne688 жыл бұрын
+Marionville Multirotors Good point, thanks.
@OliverGoldenTherapyDog8 жыл бұрын
Can you tell us how to do the FPV conversion?
@MarionvillemodelsMultirotors8 жыл бұрын
I carry out the conversion in store.
@dieselphiend7 жыл бұрын
What's up with the appearance of the carbon fiber? It looks as if it's delaminating.
@MarionvillemodelsMultirotors7 жыл бұрын
dieselphiend at what time index.
@kevinlee72606 жыл бұрын
It's the way it comes from DJI😎
@seqseq33956 жыл бұрын
como lo compro? How do I buy it? where do I buy it ?
@MarionvillemodelsMultirotors6 жыл бұрын
SEQ SEQ here you go. www.marionvillemodels.com/products/dji-zenmuse-x5-vibration-absorbing-board-coming-soon?variant=7403263043