Cheap free flight toy to RC airplane - Building and maiden flight video - chuck glider rc conversion

[@GroundControlRC]

Very nice project Marko! Those converted Chuck Gliders are an absolute blast and nearly indestructible ;-) See you in the Air!

[@markoroolaid]

thank you

[@pooljunki1]

Wow you have a lot of interesting stuff, this thing rips

[@FlyMIfYouGotM]

Nice conversion! I have been curious as to why no one seems to have cut the rudder off and reconfigured the horizontal stab into a "V" tail and use taileron control for the elevator and aileron. Radio mixing aside, this would seem simpler, slightly lighter and less drag if it would work. I may need to try this just to see if it works.

[@stevoislookingforgolfballs]

If you do this a top mounted ducted fan would be cool

[@shogunemperor]

This is brilliant bruh!! Love that motor mount!!!!

[@GrandadIsAnOldMan]

Great modification 😁👍

[@Spirit612]

Nice work, but you left out the controller in your parts listing links. Also, I didn't see you check the CG on it - looks a little front heavy.

[@zero00tolerance]

Hello Marko this is great ! i have the same plane, will attempt to build it like yours but not close to your level. Love the fast build video however 1 suggestion is to slow down on the finished part, we would like to enjoy your beautiful work and see how you build it close up. New sub from me sir !

[@markoroolaid]

Thanks

[@ВалерийЯкушин-ъ3й]

Speed and aerobatics are top class.

[@quentinbush]

After the time it took to modify, I bet you enjoyed the challenge. Heck it goes like stink. Well done.

[@AAAAAA-iw9wk]

What is the weight and flight time ????? And can you tell me a suggestion for how I can make motor mount??

[@ВалерийЯкушин-ъ3й]

You're good. The model is made beautifully. You fly super.

[@flightdirection8122]

Nice, I actually started with a sports cub s2 but then lost it in the wind and so now I’m looking at the citation longitude jet

[@musharrafhanif]

A very nice conversion. Can you please tell me the thickness of the balsa wood used for the ailerons and elevator? Also, what material is the motor mount made off (type and thickness)?

[@markoroolaid]

Hi, ailerons and elevator- 2mm balsa, motor mount 1mm plywood

[@ЭкспертВСЕХЭКСПЕРТОВ]

Лучшее что я вилел. Браво! Буду повторять.

[@markoroolaid]

Большое спасибо

[@Владимир-ч5т1щ]

Расскажите пожалуйста, как Вы выпрямляли консоли крыла?

[@tomrammel]

Nice work Marko, I also built a ducted fan model airplane from a free flight toy airplane.

[@viktorlunge1280]

Сейчас строю як 130 под 70 мм импелера. В планах еще построить мига- вот только файлы с сайта rconen не получается скачать просит разрешение на скачивание .

[@RcAircraft]

Great motor-fication 😁

[@ErPirataRc]

Nice video my friend👍

[@darrin_gunderson]

super clean build.

[@markoroolaid]

Thak you very much

[@rcawed3793]

really cool airplane

[@markoroolaid]

thank you

[@EMTAx]

Very good video. You must have a good camera man. Try to keep it more in focus tho.

[@jgme627]

👍👍👍😁 Awesome bro.

[@markoroolaid]

thanks

[@Aviationandmore747fan]

You have so much time on your hands to make it an rc plane

[@markoroolaid]

Hello. We all have exactly the same amount of time. The main thing is still that there is a great interest in RC airplanes

[@martinengelbrecht8061]

Is there a slowed down version of the build where I can see some more detail of what you're doing?

[@markoroolaid]

Unfortunately, it is not

[@martinengelbrecht8061]

Are you able to post somewhere the positioning of your various components? My son has asked me to help him build one of these. Your video is of the sort I have purchased parts for.

[@mrsmith4662]

A job well done and neater than putting a prop on the nose.

[@markoroolaid]

thank you

[@Rturrito]

Saw a stupid reaction video to this before finding the original. Gonna build one too soon

[@BenPortmanlewes]

Why add the control surfaces? , they're there.

[@THROTTLEPOWER]

Very cool, thanks for sharing........👍👍👍

[@AAAAAA-iw9wk]

Can you share file which you used for cutting motor mount ???

[@fpvlangy6931]

great job !!👌👏 😍

[@bogdog999]

Nice work, and interesting solution to locating the motor. I have considered doing a pusher version of one of these gliders. Modding is where the real fun is. Happy flying!

[@markoroolaid]

Thank you very much

[@caf1971]

Can you share stl file which you used for cutting motor mount ? thx

[@raiyanbashir1877]

I was finding exact this video!! exact this one

[@RamoLasiaf]

Excellent - Build. Instructions. Flying. 👍👍👍 Thanks admin. Thanks all

[@markoroolaid]

Thank you

[@theBodger]

Excellent I got 3 to modify ❤️

[@markoroolaid]

very good, after be sure to share your own solution, interesting to watch

[@theBodger]

@@markoroolaid yes it will have a front mounted prop and I have a set of u/c from an old model. Trying to make a slower flyer to use on a Cricket pitch.

[@theBodger]

Just uploaded short video on my channel, 👍not flown yet though,

[@pscreativity9317]

Same as me bro but yours is better

[@anmolkumar6704]

Can you find how much does this glider wieght originally?

[@markoroolaid]

Hi- 40g

[@anmolkumar6704]

@@markoroolaid thanks 😊

[@balsamidis]

can you tell us where to find the cg ?

[@RSTSamodelkin]

Cool, I want one too!

[@gajahmada-rd9vj]

Hallo Mr, help me, the information Electronic ? Batre?....Esc....brushles and proppeler...

[@jeremyoshea7941]

I have to do my homework I’m building these all the items are really hard to get right now is there any other propeller that will work that’s well made? Thank you for your time

[@markoroolaid]

Hello. This is such an easy and creative project that there are no rules. I made it myself using what I found in the workshop. So good experimenting, you can do it

[@chrisellisrc8787]

Nice job!

[@MrYeshwanthln]

Brilliant job..!

[@markoroolaid]

Thank you

[@connorkane8245]

how do you vontrol the servos?

[@markoroolaid]

Hi, could you clarify your question.

[@Владимир-ч5т1щ]

Спасибо за видео! Я пересмотрел очень очень очень много видео конверсий народного планера. (в России его так называют.) я нашел всего две самых лучших переделок, одна из них Ваша. Вопрос, как ведет себя модель, при резкой подаче газа? Обычно ставят толкающий винт с выкосом, а у Вас тянущий. Ось тяги винта расположена выше ц.т.

[@markoroolaid]

Когда самолет летит, он вообще не знает двигатель. Двигатель расположен под таким же углом к ​​крылу.

[@smashrc8481]

Certainly better now

[@МастАрт]

Круто у тебя получилось.

[@musaknshahmussu6056]

Can you tell me what is the angle of motor mount

[@markoroolaid]

hi, same as wings

[@gmodesike]

AWESOME!!

[@markoroolaid]

Thank you

[@astr0yt344]

What charger did you use because I’m having a hard time finding a charger that is 500mah for cheap

[@markoroolaid]

Hi, i use this charger www.robitronic.com/en/skyrc-rs16-charger-discharger.html

[@astr0yt344]

Thanks for the fast reply I’ve never seen anyone reply that fast 👍

[@waseemshah5865]

Very nice 👍 ... what is the thrust of this motor 7500kv

[@markoroolaid]

hi, about 80g

[@waseemshah5865]

@@markoroolaid very nice plane motor mount angle is 90°

[@waseemshah5865]

@@markoroolaid and which battery you use.... Because I want to make this plane

[@waseemshah5865]

Can I use 300mah lipo battery for this motor

[@lulufpv]

Hi ! Just one question, did you remember what was the flying weight of the aircraft please.

[@markoroolaid]

I don't remember exactly, but it might be 120g

[@lulufpv]

Thanks ☺️

[@markoroolaid]

kzbin.info/www/bejne/kGnJiWmna9eKfK8 Answer in the video. Must be more attentive :):):)

[@lulufpv]

Just a other question for the motor mount did you ad some down angle and right angle ? Or was it completely straight ?

[@markoroolaid]

Hi, the motor angle is the same as the wing

[@lulufpv]

Ok Thanks

[@lulufpv]

I dis the mai de today ans… it flew ! even whit a 20 km/h wind i manage to make a 4 min Flight and l’and it properly

[@markoroolaid]

super

[@danilodiano8323]

do you have an stl file to print the motor mount? or how have you done it? @@lulufpv

[@matejhlaca5171]

Helo...I like your project..What if I use motor 1104 Brushless 4300KV? it will be OK? Best regards

[@markoroolaid]

yes, that's fine

[@Hangar11RC]

Great fun!!!

[@orzOTZorz]

1:54-1:59 is very suggestive. 😂😂😂😂😂😂😂😂

[@markoroolaid]

;)

[@teddotesio-eyers5909]

Very good! How well does it glide (when the engine is off)?

[@markoroolaid]

Hi Ted. When motor off it glide like a rock :):);)

[@pabodhasahasmika]

Superb video

[@markoroolaid]

Thank you

[@mode2fpv]

where is the cg on this model ?

[@markoroolaid]

CG in the first third of the wing

[@theBodger]

Check out the latest Chuck glider into a Biplane 😂😂😂🤪 just uploaded a short video, any comments would be appreciated.

[@snoopysnoopyxupery5231]

Good video! Did you straighten the wings with an iron?

[@markoroolaid]

Just between my hands

[@coverdestroyer3572]

Where is the cg position?

[@markoroolaid]

The CG is located 1/3 of the wing width from the leading edge

[@coverdestroyer3572]

@@markoroolaid ok thanks man

[@SharneAndrews]

Great stuff. Mind if I share on our aero modelling club website?

[@markoroolaid]

It would be very nice. Be sure to do it. Big thanks

[@sathyaevmjmj997]

Hi bro can you give the motor mount lasercutting file

[@markoroolaid]

I don't have it unfortunately, it's been asked for a lot but I didn't stock it properly and now it's gone. However, it is so simple that I believe you can do it yourself

[@sathyaevmjmj997]

@@markoroolaid ok bro thanks

[@daviddavids2884]

some info. at 1:53, any free-flight model Must have nose-up deflection/trim built into its horiz-stab. evidence of this is Seen in the fact that, the main wing and horiz-stab openings, are NOT Parallel to one another.!!!!!! thus, conversion to rc Must, either, Eliminate this built-in ANGLE (and replace it with a movable elevator); or use LESS aoi, at the stab. googletranslate

[@sumutcyindustrial3995]

Terbang berapa menit dengan baterai 500mah

[@markoroolaid]

sekitar 10 menit

[@antodawet1775]

Pesawat yang bagus....

[@markoroolaid]

Terima kasih banyak dan salam dari Estonia yang dingin dan bersalju

[@daviddavids2884]

at 5:12, when ailerons are added onto the trailing edge of an otherwise complete airfoil, the airfoil is Changed; to a not normal state. the use of full strip ailerons is not recommended. on a model, a control surface Should have the shape of a Parallelogram!!! at 5:24, horiz-stab correctly made level. while (the Mass of a) servo is STOOPIDLY located at the tail!! covering the elevator with regular monokote, INCREASED its Mass!!!! Significantly. by, maybe, 50 PERCENT. that is NOT smart. googletranslate

[@EmmanuelFernandoSIbay]

But then, even if what you said were the proper procedures to design and build an airplane, you can't argue with the results because this converted aircraft flies wonderfully.😉

[@theoztreecrasher2647]

@@EmmanuelFernandoSIbay Yep. Whereas our friend's Infinity designs (Perpetual Motion Machines) don't seem to have got to the patentable stage yet! 😜😁

[@phearz0r]

i reckon the extra weight helped the plane overall, it was originally 49g and then was 120(iirc)

[@roberttperez1153]

The rear added servo weight is fine due to the fact that a considerable amount of weight was added to the nose of plane. The battery, receiver, ESC, motor, and mount balanced the plane rather well. As far as the wing foil the difference of shape is very little on an rc plane. Especially a small plane. Wing can be completely flat and it'll work fine. Air foils are very important on actual real man flown planes for lift due to the size of wings and airflow. One last thing. If you don't have anything good to say you shouldn't say anything at all. Rude remarks show how you need to work on yourself. Face and heal from how you have been treated in such manner. Don't treat others rudely if you're having a bad day, or have been treated rudely by someone else. The people you let out your anger are not at fault and didn't do anything to you. If anything find the person or situation that caused you to feel angry and deal with it. Resolve the situation so you won't get angry or feel hurt. If that's not possible then it's better to release your pain punching a pillow or exercising. Find a place where you can be alone and scream as loud as you can is another option to make you feel better. Peace. Great job to the one that build and made video of rc plane. Congratulations.

[@romashin921]

На радио и дурак полетит, попробуй чтоб свободный полетел

[@truth409]

Here we go on KZbin again with another ridiculous impossible For the masses have to have power power power power power and then they quit the hobby in 9 months..

[@AAAAAA-iw9wk]

Can you share file which you used for cutting motor mount ???

[@AAAAAA-iw9wk]

What is the weight and flight time ????? And can you tell me a suggestion for how I can make motor mount??

[@AAAAAA-iw9wk]

What is the weight and flight time ????? And can you tell me a suggestion for how I can make motor mount??

[@AAAAAA-iw9wk]

Can you share file which you used for cutting motor mount ???

[@markoroolaid]

Hi, sorry,I don't have it anymore. But it's so easy to do. I believe you can do it yourself.

[@AAAAAA-iw9wk]

@@markoroolaid no I cannot

[@AAAAAA-iw9wk]

What is the weight and flight time ????? And can you tell me a suggestion for how I can make motor mount??