Ion 1950's Futuristic Flying Wing - Pt11: Covering in Laminating Film - By O.F.W. (Peter) Fisher

The Ion Mk 20 is a great looking flying wing from 1957, designed by O.F.W. Fisher and English designer and owner of Performance Kits. He was often known as Peter Fisher. The Ion has a 33" wingspan and was originally a free flight model powered by a Frog 80 diesel engine, however in this build it will be converted to 2 channel RC. The original design had elevons, used to give some reflex to the wing and they could be used to adjust the trim. In this build series these elevons will be servor controlled.
The plans for this build are available from Derick Scott at www.model-plans.co.uk/perform...
The link will takes you directly to where the plan listed, but you need to email the owner of the website, see details on the homepage, to get the plan. He provides a very good service.
Free Flight Supplies - Asuka Tissue: www.freeflightsupplies.co.uk/...
Applying Laminating Film/Doculam - • Applying Laminating Fi...
Laminating film & Tissue Covering - • Doculam & Tissue Cover...
Tisue over Laminating film - Damage Repair - • Tisue over Doculam - D...

[@RB-yq7qv]

Very tricky looks good

[@MarkRobinson555]

Thank you very much, I was really pleased to get it finished!

[@Steve-mb8tg]

Great video, as always. Mark, you certainly like a challenge when it comes to covering... It's going to look fantastic when finished 😊

[@MarkRobinson555]

Thanks very much, really appreciated

[@alanreynolds2125]

Nice one Mark not an easy beast to cover!

[@MarkRobinson555]

Many thanks! It was certainly good to get it done, it did prove a little tricky!

[@thercbarn5001]

Looking good Mark! I can't wait to see what trim you put on it. Mike

[@MarkRobinson555]

Hi Mike, thank you very much, appreciated

[@terryblackman6217]

Not an easy one to cover. I think you did well there Mark.

[@MarkRobinson555]

Thank you very much Terry, appreciated. I was certainly pleased when it was done! 😜

[@jayasuriyak4615]

Big fan of you from India, can you please provide the detail of laminating film.

[@MarkRobinson555]

Thank you very much, appreciate the comment. Here is a link to the film I use www.ebay.co.uk/itm/186086456740?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=FDdqUo8qRCC&sssrc=4429486&ssuid=fsKLYgcjQ86&var=&widget_ver=artemis&media=COPY

[@Elnufo]

My guess is, you will do the first wing again. I cant imangine you will be able to overlook the wrinkles near the leading edge, especially when they become even more visible after applying the tissue 😉

[@MarkRobinson555]

Thanks for the comment, I will leave it as the wrinkle is very small , have to see how it looks when covered - fingers crossed!

[@markford7682]

Hi Mark , would there have been any advantage of using your small iron along the fuselage edge??great build as always.

[@MarkRobinson555]

Yes, absolutely. Thanks for the comment, pleased you like the build

[@MarkCroucherRC4fun]

Compound curves with Doculam are fun aren't they 😊

[@MarkRobinson555]

Certainly pleased to get it finished! 😜

[@kenkingsflyingmachines2382]

I am very interested in the next step...the tissue on top. Will you be using dope?

[@MarkRobinson555]

I will be posting a video very soon showing the technique in full 😜

[@kenkingsflyingmachines2382]

@@MarkRobinson555 I dug into your video archive and watched the covering of the Flying Quaker. I'm re-covering a Privateer close to the same size with the same scalloped LE and want to use your technique.

[@MarkRobinson555]

@@kenkingsflyingmachines2382 pleased you found the information you need, thanks very much for the comment, good luck with the covering 😜

[@hedleypepper1838]

Awsome job. Thanks. I am curious how tissue goes on over the laminating film

[@MarkRobinson555]

Thanks very much, appreciated. I will post a video soon showing the tissue going on the film 😜

[@johnfreeman7005]

Hi Mark i have been watching you cover things with this doculam ,looks really good ,but you can't get it here in New Zealand and i have asked around but they tell me that the laminating film here will not go around corners and does not shrink. Please can you tell me what type and where can i buy some please. the normal iron film is around $60.00 N Z dollars for two meters, so l would sure like some of the film you are using. thanks john

[@MarkRobinson555]

Hi John, thank you very much, appreciate the comment. Here is a link to the film I use www.ebay.co.uk/itm/186086456740?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=FDdqUo8qRCC&sssrc=4429486&ssuid=fsKLYgcjQ86&var=&widget_ver=artemis&media=COPY Hope you can find some, I have heard people heres say that it won't shrink of go around corners well, but it does if you get the temperature right!