Yamaha R7 Yoshimura R-77 Exhaust Install & Sound Test

[@ScoutsOut]

List of tool in the description, and a full sound test and review next week. Something I forgot… clean the whole exhaust after installation with alcohol to remove any grease or finger prints once they burn in they stay forever!!!

[@K10-c1k]

Yoshimura does sell a kit to get them out just incase you already fucked up.

[@Nate_F2W]

Would isopropyl work?

[@ScoutsOut]

Yes

[@FunnyValentineD4C]

This video is an amazing guide. My exhaust went on easy because of this video. Keep up the fantastic work man!

[@ScoutsOut]

thanks a bunch man, i really appreciate it... im glad it helped and enjoy the new exhaust!!!

[@michaelafranceschina4716]

As always great job bro! Can’t wait to order this exhaust for my R7 now. These have definitely been the best videos out there for people with this model who want to personally work on their motorcycle.

[@ScoutsOut]

Thanks bro!!! really appreciate it

[@mikerowe4515]

Thank you again. I installed my Yoshimura R-77 Exhaust on my 2023 Yamaha R7 yesterday using your video as a guide. It looks and sounds great. It also does seem a little faster to me. The only issue I faced when installing it was placement of the hitch that holds the pipe on the bottom of the bike. I actually had to look at the PDF online instructions, until that point I had been relying on your video for the entire install. (Yea, I probably should have done that first.) And it was the hardest part of the install for me. It was a little tough getting it in there, but well worth the effort and time saved removing all the fairing. Even with that self imposed snafu, the install went well and relatively quickly. I just wanted to acknowledge you for making this install really easy for me. Even the Anti-Seize trick was incredibly valuable. Keep up the great work!!

[@ScoutsOut]

Thank you! I really appreciate that! I'm glad it worked out. The exhaust is suck a huge improvement for the bike!

[@Avexius]

Another amazing guide! Just installed the R-77 with the baffle on today and it's already crazy loud, can't imagine taking the baffle out. Removing the 2 screws that holds the rear brakes definitely helps with installing the exhaust can and that was the most painful part of the process. On the other hand, I actually bought some Apex riser clip-ons and was hoping you could put together a video on how to install them!

[@ScoutsOut]

thanks bro I really appreciate! Ive been wanting to get a set of clip ons just been spending too much money lately lol. I did make a video changing out the fork shock oil which would be the hardest part of installing clip ons if you want to use that to help you out. here is the vid kzbin.info/www/bejne/kJjMgWSCh6qZZ9E

[@tjjr1062]

I installed my R-77 exhaust today. This video help me a lot. I'm so glad I used the DB killer. Must be crazy loud without it. Thanks.

[@ScoutsOut]

Hell yea! Glad to hear it hear it helped, enjoy the new exhaust

[@warren010h]

Just installed mine yesterday following this video and absolutely love the sound. I did the bolt at 11:07 the same way. Trying to fit it the other way was a pain in the a$$! Had to stretch my headers slightly also which took a little strength. I made the same mistake you did when you installed the DB killer and dropped the damn washer inside the can 😂. Took me longer than I thought to get it all together and farings put back on but love the end result!

[@ScoutsOut]

Awesome bro, glad to hear you got it done…man that was annoying with the DB washer 😂

[@alexj6882]

Hi there did you end up tuning the bike with the exhaust? Is it recommended??

[@ScoutsOut]

No not yet, it’s running good without tune but I will tune it one of these days

[@kingtingz41]

I don’t even have an R7 as of yet but this video is by far the best for explaining the exhaust swap. Great job 👍🏼

[@kingtingz41]

Will you do a fly by or sound check outdoors without the db killer?

[@ScoutsOut]

Thank you!!! Much appreciated 🤙🏼

[@Nattyc239]

Does the exhaust cause any check engine light ?

[@ScoutsOut]

No, no check engine light on,

[@ScoutsOut]

Yea for sure that vid will be out next week

[@jakegarcia84]

Just ordered the AT2 today.. thanks for this tutorial, this is gonna be my weekend project. Thank you

[@ScoutsOut]

Nice dude the at2 is awesome!

[@YamahaBlue]

You earn every sub, this is a hidden gem of a channel

[@ScoutsOut]

Thanks Rex I really appreciate that 🍻

[@johnrhodes101875]

Yoshimura did a good job making a 2-cylinder sound deeper and throaty not to bad

[@ScoutsOut]

they sure did, its been a great exhaust

[@macariosan2838]

Using this Video for my Yoshi install! Got the AT2 system coming in a couple days. Just wanted to give you a shout out for the video! Appreciate the knowledge man!

[@ScoutsOut]

Hell yea dude the at2 looks and sounds so good, good choice and thanks bro glad it’s helpful

[@K10-c1k]

Dude your videos are super helpful. Please keep them coming. I will be using this video and following it step by step tomorrow to install my R-77 exhaust. And on another note I did buy a factory service manual and the torque spec for the header bolts is 20Nm or 15 Ft Lb's.

[@ScoutsOut]

nice dude, I should buy that manual. glad the vids are helping your gonna love that exhaust

[@vansonmafeet734]

I just bought this system for my 2018 CBR650F and just now noticed something. There are no springs to attach at the top of the header flanges. Just bolt them down and you're good. That's awesome! Those springs up there can be a pain in the butt to install. I opted for this one since Two Brothers Racing were waiting on a part and they couldn't tell me when it was going to be back in stock. I liked the TBR system because the exhaust can sits under the bike, as where this one comes up the side along the swingarm.

[@ScoutsOut]

Nice, that is cool!

[@benjaminmartin3212]

Hey! I have your same bike and can’t decide on an exhaust. Where did you get yours from?!

[@gwap_e5164]

started watching not to long ago and I love this R7 content im thinking about getting one myself and this video makes me want to get one even more!

[@ScoutsOut]

Thanks, much appreciated!!! It’s truly been a fun bike to own 🤙🏼

[@ckMTB]

A very cool upgrade mate, the exhaust not only looks fantastic but the sound is sick too. Great video and nicely shared mate. Keep up the good work and have fun with it. Ride on

[@ScoutsOut]

Thanks ck, the exhaust brought the bike to life super nice!!

[@TwoGuysOneVan]

WHAT!!!! No "High revs fly-by" to hear that new exhaust howl??? You have failed me for the last time... :D Nice vid mate... And that new pipe sounds SCHWEEET!

[@ScoutsOut]

Haha next week Phil for some rippin sound lol

[@ladyjedi3D]

Looks great, sounds amazing. Gotta catch up on the vids. Enjoyed the camera work to see what was going on up close! I remembered to clean my pipe off after install so no fingerprints burnt in. Vid is Awesome!

[@ScoutsOut]

Thank you!! Glad it helped out, happy new year!

[@RJessick]

Thank you so much for this video! Helped me a ton with my instal and even got the same tools. Very easy with your help

[@ScoutsOut]

Nice dude, glad it helped and enjoy that new exhaust

[@paulsweeney9109]

Spot on mate, i had the quandry on the strap hanger bracket......all sorted now. Many Thanks

[@ScoutsOut]

Hell yea man, glad it worked out. How you liking the exhaust?

[@paulsweeney9109]

@@ScoutsOut the exhaust looks awesone, carbon fibre has got a superb finish on it. Its load, a bit too load i dont know what the decibels would be ?. Ive put the baffle in and its toned it down slightly......am i right in saying Yoshi say themselves the bike is best tuned with the baffle in ?

[@ScoutsOut]

The bike will always be better tuned, glad your enjoying it

[@TheLastUchiha337]

Best installation video, I used this for my 2022 MT07.

[@ScoutsOut]

Thanks bro 🍻

[@VodouGod]

Thanks for the video man! I got my exhaust with the carbon fiber Muffler installed in a couple hours and it sounds amazing!

[@ScoutsOut]

Hell yea!! congrats on the new exhaust

[@therealtomfoolery]

Figured we would at least be able to hear the damn thing. I just bought my 2024 R7 4 days ago and ordered this exhaust today

[@ScoutsOut]

Hell yea man, congrats on the new bike but yea man it’s way to quiet, the yosh opens it up so much… let me know what you think

[@therealtomfoolery]

I got it installed and took her out today, sounds so much better. Thanks for the video@@ScoutsOut

[@ScoutsOut]

Hell yea, good for you bro! Glad the vid helped. Enjoy that awesome sound!

[@romanhwc]

Good stuff. Really appreciate you listing all the tools you used.

[@ScoutsOut]

Thanks man I appreciate the comment 🍻

[@exploh]

that exhaust is SCREAMING

[@constructivecriticism1011]

great comprehensive tutorial i feel i can change the exhaust after watching just once.

[@ScoutsOut]

Glad it helped, I appreciate that!

[@FreshRides]

since you're not deleting the O2 sensor is a power commander or ECU flash required still or no?

[@ScoutsOut]

I don’t think it’s required but it will run better if you do

[@orhancaliskan105]

Just installed the yoshi r77 full exhaust system last night in carbon fiber all I can say is holy SH*T amazing look and sound and thanks to you brotha your install video helped me out a lot just waiting on the r6 fender eliminator kit I will use your install vid for that too bike is starting to look sick I have the black edition as well

[@ScoutsOut]

Hell yea, right on man. Glad the vid was helpful, did you try out the baffle yet?

[@orhancaliskan105]

@@ScoutsOut no I haven’t i literally was lost for words once I hit the throttle omg I might stay loud with it

[@ScoutsOut]

Haha yea I said I would do a db vid but it’s really growing on me I don’t want the db killer in lol

[@orhancaliskan105]

@@ScoutsOut it’s nice that they gave us the Db killer but mine will sit in the garage running the R7 yoshi loud lol question the tank grips any clue who has those in stock ? I already ordered those frame sliders still waiting on them to arrive you got awesome videos man really appreciate the content

[@ScoutsOut]

@@orhancaliskan105 yea I think mine too, I got the tank grips from TST Industries but I see they are out of stock and so is revzilla and Techspec. glad you like the content man, im having tons of fun with this bike

[@LSB44446]

Would this exhaust require a tune to prevent loss of power or engine damage from lean conditions?

[@ScoutsOut]

I don't think so as it's still under throwing a cel

[@KevinLopez-wt7yr]

Thank you. I was waiting on an installation video to follow when I get my exhaust.

[@ScoutsOut]

🤙🏼 glad you liked it, hopefully you get yours soon!!

[@KevinLopez-wt7yr]

@@ScoutsOut just got it ordered, hopefully it comes in soon!!!!

[@ScoutsOut]

Nice!!! Congrats bro

[@KevinLopez-wt7yr]

@@ScoutsOut just got it installed and..... Holy smokes it sounds amazing. Followed your video step by step and it was easy to install. Thank you again

[@ScoutsOut]

Man that’s so cool, good for you bro!! That’s bad ass!! Enjoy!!!

[@lucasortino1451]

Con questo scarico la moto deve essere mappata la centralina? Ho non c'è bisogno di fare nulla, lo vorrei acquistare

[@ScoutsOut]

puoi cavartela solo con lo scarico, la messa a punto sarà migliore ma secondo me solo lo scarico va bene

[@Enfiare]

I like this vid because I always work on my bikes, and I get in there. Tuning it is half (or most of) the fun. Riding is where and when you really get the rewards. When I get mine, 60th vers, I will not be available for a good long while; not because I'm slow, but because I'm thorough. 🤔🗯👍🖖💯😇😁

[@ScoutsOut]

Thanks Austin, i agree i really enjoy working on bikes!! Hopefully you get the 60th soon, cheers!!!

[@Enfiare]

@@ScoutsOut 😁👍it's reason enough to keep living lol. Thanks for a great vid. I would like more, please.

[@ScoutsOut]

Haha for sure, the sound test will be out tomorrow morning. Happy you like the content I’m having fun with this bike

[@toshstorm]

That exhaust looked like it scared you a little bit 😂 sounds great, awesome videos!

[@ScoutsOut]

Haha yea it did, thanks man 🍻

[@toshstorm]

@@ScoutsOut can you tell me where/ how you got the intergrated turn signal in the tail light? I just bought the black R7 brand new this weekend. And have been binging your videos 😂 doing pretty all the same things you’ve done with your bike even ordered the yoshi exhaust a couple nights ago.

[@ScoutsOut]

Hell yea congrats on the new bike. Integrated Turn Signals for R6 works on R7 amzn.to/3DbBYsL I did a vid on installing them and the license plate, the new tst license plate is better now than what I did in the vid, but the turn signals are awesome kzbin.info/www/bejne/h4Wlopp7hdd1gLM

[@toshstorm]

@@ScoutsOut you’re the best man! Going to start recommending you!

[@ScoutsOut]

@@toshstorm thanks, much appreciated. Enjoy the new bike

[@zachgarnett]

Awesome video !! 🍻 “you can see the overspray on here!” 🤣

[@ScoutsOut]

Haha, thanks man 🍻

[@rbszx14r56]

I have a Yoshimera R55 on my 2013 ZX14R it sounds amazing especially when it's pulling hard at the top of 3rd gear

[@ScoutsOut]

Nice, yea the yosh pips are never a bad choice 🤙🏼

[@tdl_r7]

Great video man. Getting my r7 this week.

[@ScoutsOut]

Nice, that’s exciting! Let me know what you think when you get it

[@tdl_r7]

I love it. Wish I got tst lights with halo though 😢 but you are my go to for any work I do to my r7. Are you on IG?

[@ScoutsOut]

Nice, I appreciate that, glad the vids are helpful. Yea I do have IG it’s scouts_out_yt

[@Homboy_]

Awesome exhaust, beast sound💥loved it

[@ScoutsOut]

Thanks, I’m liking it a lot!!

[@wickensonline]

Love this guide, and your style. Want one of these, and one of those!

[@ScoutsOut]

Thank you! I appreciate that

[@SignatureAuto_]

I had a lot of trouble putting that metal piece around the canister So I took out the rubber which made it a little easier. Is it ok that I didn’t put the rubber underneath?

[@ScoutsOut]

Dang, yea man it’s important, the rubber provides damping and keeps the metal bracket from destroying the exhaust

[@franduncandroneproductions]

Like 8 exhaust fits perfectly this bike is beautiful very nice very nicely done good work

[@ScoutsOut]

Thanks Fran, I’m really enjoying this bike!!

[@franduncandroneproductions]

@@ScoutsOut yeah its beautiful bike

[@friedpork_owl]

I hope we see custom radiators for the R7. I appreciate this video immensely. 🍻

[@ScoutsOut]

glad it was helpful 🍻

[@wazoo2095]

Helped me out a lot. That's so much for the video

[@ScoutsOut]

Glad it helped out bro

[@wazoo2095]

@@ScoutsOut Your the reason I installed my exhaust system myself besides paying someone. What tuner do you recommend?

[@ScoutsOut]

Dano’s performance or 2 wheel dynoworks for a flash is the easiest way to go

[@ray2228]

Dam nice sounding yoshi

[@ScoutsOut]

thanks man, such a huge upgrade for this bike!

[@shroud4269]

Man I think the r7 is the sexist bike on the market rn. The only thing I'd put on par or equal to is the burning crimson red of a Ducati Supersport or Panigale. But if you want that all blacked out Nightrider bike, the r7 is it.

[@ScoutsOut]

Haha well said and I totally agree, the pany’s look sick too

[@sumyungpunk]

sexist, or sexiest?

[@ScoutsOut]

lol will go with sexiest

[@1000750]

Awesome video, that first fire up was MEAN!!!! Sick, 🤙

[@ScoutsOut]

Haha yea man, that was way to loud for the garage lol

[@KadokaGear]

I busted one of the push pins getting the fairing off. Any idea where to get replacement pins? The one at the top just behind the front tire.

[@ScoutsOut]

I bought these on Amazon (more than you need but many sizes for other vehicles) amzn.to/3lzeXt0

[@KadokaGear]

Thanks a lot! Appreciate ya. And I appreciate your videos. Super informative and helpful. I went with the M4 exhaust by the way.

[@derikwooddell3135]

Thanks! Installing mine today!!

[@ScoutsOut]

Nice dude, what do you think and did you go with or without db?

[@omniphaze81]

#1. I would have NEVER gotten through this install without you. Thank you from the bottom of my mechanically challenged soul. #2. I’m noticing a decent amount of popping when shifting up. Maybe I’m just shifting to slow idk. Should I go ahead and get the tune done? Thanks!

[@ScoutsOut]

Thanks bro, I’m glad it worked out! As for the popping yea it does it a lot after exhaust install. I ended up putting an FTECU on my bike to remove some engine braking and that reduced the popping a lot. I would do what ever I take mad you want to do and send your ecu in for a tune. You can ride it just fine with the popping though

[@omniphaze81]

@@ScoutsOut word bro. It doesn’t bother me that much. I’m just happy i can hear my own bike next to my wife’s 300 at stop lights lol. Thanks for the reply!

[@ScoutsOut]

@@omniphaze81 😂 I hear ya, my sone r3 was louder than my r7

[@omniphaze81]

@@ScoutsOut pure pain 😂

[@toyboxlemonza3293]

I feel like this single mod changes the entire bike. The stock exhaust is so restricted, who much more power does this allow the engine to make?

[@ScoutsOut]

Yes it really transformed the bike, it sounds awesome, not sure what I got from the exhaust but with all 3 exhaust dna filter and dna cap gave me 6ish extra bourse power

[@jakegarcia84]

Hello just installed my yoshi AT2. Is it okay for the lower part of the headers touching the lower metal fairing?

[@ScoutsOut]

Congrats, that exhaust is awesome. No it shouldn’t touch, I would loosen everything and move all the pieces of the pipe slightly to get the clearance, hope this helps

[@Jinx19766]

Awesome Video. Pretty fun to watch. Subbed

[@ScoutsOut]

Thanks and welcome to the channel!!

[@victorgarcia8304]

Perfect step by step video! 👌

[@ScoutsOut]

Thanks, much appreciated

[@santoshsatyatej5190]

thanks for the detailed instructions. did you have to get an ECU flash after installing the exhaust?

[@ScoutsOut]

Glad it helped, no I didn’t get it tuned per say. I did install an FTECU and put the unrestricted tune on it but it only changes engine braking and earlier fan on times

[@SPADE550]

Where did you get your black 4mm black bolts from? And the back tire lift? Thank you in advance

[@ScoutsOut]

What’s up Vic, this is how I got the bolts Yamaha R7 Best Free Mod kzbin.info/www/bejne/j2ndaX2Peq2tedk

[@ScoutsOut]

I got the rear stand here imp.i104546.net/zNxBx6

[@marcusirobinson]

Just tried my install, I think I got the wrong pipes because the holes for the exhaust won’t line up and there’s absolutely no play in the midsection 😑

[@ScoutsOut]

Mine felt like there was no play I pulled them apart pretty hard be for they budged

[@marcusirobinson]

@@ScoutsOut thanks.. they do require leverage to get the apart. They do go compress back in so anyone out there that sees this may need to have a buddy or something to keep them apart just enough to get the headers on.

[@Moto_Rid3r]

Do you need to dyno or ecu flash if you install an after market for this bike?

[@ScoutsOut]

Technically no, but it makes a huge difference if you do

[@dgreatmoto6991]

How to order yoshimura full exhaust for R7 ???? Ty

[@ScoutsOut]

I bought it here, but they are out of stock right now tstindustries.com/yoshimura-race-series-r-77-works-finish-full-exhaust-system-yamaha-fz-07-mt-07-xsr700.html

[@chumaster90]

My exhaust came today, but it did not come with springs (bought this used). Do you know the length of the springs?

[@ScoutsOut]

I took one off and measured it, it looks about like 2.6 in. I think this one would work amzn.to/3ZXX5tL

[@chumaster90]

@@ScoutsOut awesome, thanks man!

[@Enfiare]

I shall have an anniversary edition R7, and I shall shape it to my delight.

[@ScoutsOut]

Lol the anniversary edition looks good!!

[@Enfiare]

@@ScoutsOut yaas, more than fine! I was just showing my neighbors a pic of the 60th Ann version, preparing them for what they shall see coming June, and we ended up chatting for an hour, trading stories and the people who made them with us. Nice way to start the day.

[@jonathoncapaul2854]

It looks like a slip on won’t work for the R7, correct? Gotta buy a whole system? I’ll be replacing stock exhaust once I compete break in. Do you think a tune is needed when installing an after memory exhaust?

[@ScoutsOut]

yea you can only do a full exhaust, there is no way to take apart the stock one sadly. I don't think its absolutely needed to complete a tune I don't think you will do any damage to the bike but it will defiantly run better and pop less with a tune. I would say the worst that could happen is you foul up the o2 at some point

[@kevin02169]

Love your videos man. I got the at2 for my 2023 r7 and I’m have some trouble getting the headers in. It seems like it doesn’t really line up perfectly. Any suggestions?

[@ScoutsOut]

You can pull the pipes apart a little. The tube in the center is not welded to get her

[@kevin02169]

Thanks for the tip. It worked out perfectly. Just one more question, do I need to get it remapped/tuned?

[@steveshaus5710]

You didn't clean the exhaust with isopropyl alcohol before staring the bike?

[@ScoutsOut]

I know 😞 so dumb…I was too dang excited to get out and ride

[@steveshaus5710]

@@ScoutsOut Hey I forgot to ask, did you get a check engine light when you put this exhaust on?

[@amaninastory7525]

Very descriptive good quality video. 👌🏼

[@ScoutsOut]

Thank you!! Much appreciated

[@Enfiare]

Working on a bike is very zen for me.

[@ScoutsOut]

Yea me too

[@MrRoxx17]

Nice installation tutorial, Yoshi should pay u for this. What are you doing to the intake? Horde Power Airbox? Direct mounted DNA filters? Something else?

[@ScoutsOut]

Haha thanks man I agree lol, I haven’t done enough research yet on the intake I will say the horde was looking pretty cool

[@dygunna8309]

Quick question after the install was it necessary to get a power commander or anything else installed?

[@ScoutsOut]

I think your ok without but it is recommended that you do, I rode mine for 8 months or so without and it made a big difference after the intake and FTECU tuner I did. I’m hoping to get a dyno done soon

[@dygunna8309]

@@ScoutsOut thanx, and keep putting up great content!

[@miguelgallardo74]

Do you have a link were I can buy that exhaust Ora website??

[@ScoutsOut]

I got it here but they are out of stock right now tstindustries.com/yoshimura-race-series-r-77-works-finish-full-exhaust-system-yamaha-fz-07-mt-07-xsr700.html

[@miguelgallardo74]

Thank you

[@Renzolito]

Can't wait for the ecu flash or tune. which ever route you go about. Planning on getting an R7 with the same exhaust would like to know how to tune or flash the ecu for the exhaust.

[@ScoutsOut]

Right on, you will enjoy it. I’m looking forward to a tune, hopefully somthing soon

[@VS-yv8yk]

Is it a must to re-flash the bike when you change the exhaust?

[@ScoutsOut]

No I do t think you have to, it will make it noticeably faster though

[@VS-yv8yk]

@@ScoutsOut great! Thanks for the feedback, it's on my to do list :)

[@orhancaliskan105]

Question looking to upgrade my clutch lever and brake lever any recommendations?

[@ScoutsOut]

I haven’t seen any I’d jump on yet, TST has the brake lever only right now from Brembo. I’ve done cheap ones in the past but they fade and suck so I think I’m gonna hold out for the brembo ones myself

[@bradyoung1052]

Thank you this video was very helpful.

[@ScoutsOut]

Glad it was helpful!! Cheers..enjoy the new exhaust

[@pooch09]

Nice job!!

[@ScoutsOut]

Tha l you!

[@steezy1692]

watching this even tho i don't have an r7. when i do get one i know how to do it :)

[@ScoutsOut]

Right on, glad it’s helpful. When you gonna get one?

[@steezy1692]

@@ScoutsOut when I have the money 😂 im broke atm but hopefully soon!

[@nwjt]

Does your header touch the bottom metal fairing on the right side?

[@ScoutsOut]

No it doesn’t, it’s close but not touching

[@nwjt]

@@ScoutsOut ok I'll keep trying, mine touches

[@ScoutsOut]

Maybe the headers aren’t seating all the way in, make sure the gaskets are in properly

[@aldwinlacuesta15]

Great video! But is it really okay to bend the O2 sensor wire like that?

[@ScoutsOut]

Thanks, as long as you take it out of the brackets it can be twisted up just fine with no damage. If you left the wire in the two metal brackets that are holding the wire in place and spun it as much as required to get it out yes it would damage it. If you don’t feel comfortable doing that I showed where the connector is, you can completely remove it. 🍻

[@elchuy5116]

Do you have to tune the bike after you install the exhaust? Where did you find the exhaust

[@ScoutsOut]

It’s been running great without a tune, I think your good until you add an intake too. I’ll be tuning mine and installing the intake as I want the boost in power. I bought the exhaust here but they are out of stock right now tstindustries.com/yoshimura-race-series-r-77-works-finish-full-exhaust-system-yamaha-fz-07-mt-07-xsr700.html

[@steveshaus5710]

So does the Yoshimura R77 for 2020 MT07 fit without issues? OR is this a 2021 Yoshimura for the R7?

[@ScoutsOut]

The bracket is different, if you buy the MT07 one you will have to make your own bracket

[@Crylhound]

13:25 SOUND Test

[@Gimme_Stitches]

Great video! Let me know if you want to get rid of your front LED turn signals :)

[@ScoutsOut]

Thanks man, haha I’m waiting for a flush mount set. If the stock ones don’t fit on my 250l I’ll let ya have Um

[@peng1790]

Did you need to tune the motorcycle for the exhaust?

[@ScoutsOut]

It runs fine without a tune, I’m going to tune it later though

[@MultiSkrillex]

Beast😈😍

[@ScoutsOut]

Thanks bro, much appreciated

[@doctordemon6487]

Orrrr yeah 🥳🥳🥳🥳

[@ScoutsOut]

Haha she’s alive now!!!

[@doctordemon6487]

@@ScoutsOut hell yeah 😊 I can’t wait for the other stuff you got planned 😊 Can you do me a favour 😊 You know the frame holes on the sides, Can you Measure them for me because I’m ordering like frame ends, not frame protectors just frame ends😊 for cosmetic 😊 You are the best 😊🙌

[@ScoutsOut]

Hit me up on IG so I can send you pics and info would be a lot easier than in KZbin scouts_out_yt

[@doctordemon6487]

@@ScoutsOut done ✅ 😊

[@danielpena-un8vl]

I cant find that exhaust anywhere :(

[@ScoutsOut]

Looks like the stainless is in stock right now tstindustries.com/yoshimura-race-series-r-77-works-finish-full-exhaust-system-yamaha-fz-07-mt-07-xsr700.html

[@TheSwampDaddy]

What were the two power tool models?

[@ScoutsOut]

Hi Robert I used 3 different power tools Snap on CTR725 (1/4” ratchet) Snap on CTS761 (screwdriver) Milwaukee 3/8 ratchet

[@bebeKoRider]

where did you buy the yoshi? and is it for MT07 or there is designated for R7? thanks

[@ScoutsOut]

I got the yosh from TST but they are out of stock again, it is for the R7 not mt07. The only difference is the bracket that holds it in the rear though

[@bebeKoRider]

@@ScoutsOut thanks for the info..:)

[@shashwotmotovlogssf4646]

Do you have to tune when installing this exhaust.?

[@ScoutsOut]

No I think your good without a tune unless you add the intake as well, you will get considerably better out come if you do tune it though. I will be tuning mine soon after I install the intake

[@MrReverie]

great video

[@ScoutsOut]

Thank you! I appreciate that

[@jocri_v]

Where did you get it? I cant find the exhaust lol

[@ScoutsOut]

Looks like TST is out of stock right now, RevZilla has them in stock though

[@Brooklyn_Raleigh]

Did you do a power commander or intake? Or just straight exhaust?

[@ScoutsOut]

Just exhaust as of now but I have the intake and know which tune I’m going with so I should have those done and vids out soon

[@AlcyPC]

Be careful with the header nuts. I think i messed up the threads playing around with them with the adjustment

[@ScoutsOut]

Ohh no, did you get them on ok since?

[@AlcyPC]

@@ScoutsOut It just happened to me I’m getting some threadlocker which should fix it. Hopefully i didn’t make a grave error

[@ScoutsOut]

@@AlcyPC might be worth a tap and die set to fix the nut and stud

[@killerjoke56]

Thank you for these videos! I can’t wait to start putting real mods on my R7. I really want the Akrapovic but the yoshi j makes more sense for the price point. Any thoughts? Should I just save up for the akrapovic? Would love to hear other’s thoughts and opinions. Thank you!

[@ScoutsOut]

Thanks man I appreciate that, that’s a hard trad off as I haven’t heard the Akra but it looks really good. I would say the performance would be close to the same no matter which one you get I think at this point it’s personal styling and either one would be awesome

[@kadenkucza2678]

hey by chance could you tell me where you purchased the exhaust from?

[@ScoutsOut]

Yea I got it from TST Industries

[@ScoutsOut]

tstindustries.com/yoshimura-race-series-r-77-works-finish-full-exhaust-system-yamaha-fz-07-mt-07-xsr700.html

[@michael-te1fw]

Looking good man were did you buy your exhaust I would like one

[@ScoutsOut]

I got it from TST Industries, they are currently out of stock though tstindustries.com/yoshimura-race-series-r-77-works-finish-full-exhaust-system-yamaha-fz-07-mt-07-xsr700.html

[@SuperDubdude]

Do you think you could have done the install with removing only one side of the fairings? Love the video. Currently in the market for an r7, most definitely doing an exhaust upgrade too.

[@ScoutsOut]

Definitely, you don’t need to remove the left side but to remove the middle piece of fairing at the bottom you kind of half too. I was more worried Abbott the exhaust dropping on it and possibly breaking it, I think it is worth the extra removal.

[@Bohdi46]

I did mine with that exact bike and exhaust, only took off 2 fairings on the exhaust side

[@SuperDubdude]

Hey guys, did the r77 system come with the db killer or did you have to buy that as well?

[@ScoutsOut]

Comes with it

[@n8thegr84456]

Do you need a tune after the install?

[@ScoutsOut]

No I don't think you do, it will run better and be faster if you do but if you just want sound then your good

[@brandon55901]

Hey I am looking to get this exhaust but I read through the website for multiple exhaust systems this one included and it states it is not street legal has anyone ever had any issues in regards to the manufacturer stating this? @Scouts Out or anyone else have any input?

[@ScoutsOut]

Yes, most full exhaust are for track only. You have to look into your state country region on if you can use one

[@brandon55901]

@@ScoutsOut thank you for responding! Time to do some digging

[@terrystarr4793]

Amazing tutorial!

[@ScoutsOut]

Thanks bro, much appreciated!!! Cheers!!

[@Paradise2Paradise]

13:26 thanks!

[@raidaolawary]

How many date it's lanch in india

[@ScoutsOut]

Not sure, I can’t find any dates for the launch online for India 🤷🏻‍♂️

[@raidaolawary]

@@ScoutsOut that mean this bike was not launch in India

[@ScoutsOut]

It says expected to launch next year

[@raidaolawary]

@@ScoutsOut you mean 2023

[@ScoutsOut]

I would think 22, the article was wrote in 21

[@lucaric6935]

Do you need a tune after install?

[@ScoutsOut]

No, but you will get a lot more out of the bike if you do