Dolmar Makita PS 420 Chainsaw Repair No Start Diagnostics And Repairs FIXED!

This German made Dolmar PS420 chainsaw was dropped off and the customer said it will not start!
Dolmar was bought out by Makita in the 90's.
Makita has now exited the gas market and Dolmar chainsaws are no longer in production.
Come with me, and let's find out why this thing won't start!
Grab a fresh coffee, we have work to do!
If you enjoy watching me diagnose and repair chainsaws, I have many videos that you may enjoy until my next upload! Click here : • Stihl Chainsaw Repair ...
I really appreciate you being here! THANK YOU for all of the kind words and your support!

[@marriedwithsmallengines]

Happy Thursday! Please!! LIKE this video and leave me a comment (or two or three!) below! I LOVE reading all of your comments! Here is a story about a little German made Dolmar PS-420 chainsaw that refuses to start for it's owner. Let's see if we can help this little saw get back to work. Also, I just saved 12 beat up Stihl saws from getting parted out - they just arrived! I will show you them next video! Thanks so much for watching! Don't forget to LIKE, and leave a comment - I am down in the comment section right now looking for you!

[@geoffreycodnett6570]

Do you plan to do anything with the two man chainsaw?

[@RaysLaughsAndLyrics]

👍

[@dcvariousvids8082]

@@geoffreycodnett6570- I reckon sourcing parts is a challenge.

[@bmiller7710]

Let’s work on that 2 man saw!

[@marriedwithsmallengines]

@@bmiller7710 let’s do it!

[@ivoryjohnson4662]

When a Canadian says it’s cold that’s brutal….stay warm say hello to Mr Chainsaw

[@marriedwithsmallengines]

He says hello!

[@robertcochran7103]

I lived in Florida for almost 3 years. It was a long time ago and let us say that I am glad that I live in Maryland. I don't have to worry about hurricanes here. I think about half of my family members are north of Maryland, a few are in Maryland, and roughly half my family members are in Florida. I miss all my out-of-state family members. The ones living in Florida suffer from hurricane strikes each year. Given the choice of facing cold weather or facing a hurricane, I will take the cold weather choice every time. Now that I've said all that....I agree that Florida is interesting for either vacations or cruises...as long as you can pay for it all, of course.

[@ronbeatty516]

You have to do the two man Hornet chainsaw soon. The suspense is killing us! 😀 Thanks for this video. You should start a chainsaw museum. It looks like you already have quite a collection.

[@marriedwithsmallengines]

Maybe I am procrastinating on that one a Iittle… I have no idea what I’m getting myself into.

[@ronbeatty516]

That’s part of the fun. Even if you can’t fix it the adventure will be neat.

[@marriedwithsmallengines]

@@ronbeatty516 you’re right !

[@wadeadams3067]

Good work Erica! I have never seen or heard of Dolmar saws here in western Pennsylvania I also want to mention it is really hard to find a good skilled honest trustworthy mechanic of any kind for any type of equipment out in my neck of the woods anyone else have this problem?

[@marriedwithsmallengines]

I’m so glad you liked the video!

[@michellatour150]

Most if not all 'Phillips' screws on small carburetors are actually J.I.S. (Japanese Industrial Standard) type screws and require the proper driver/bit not to strip them.

[@Sethhaun78]

I have a pair of 2 blue handle black driver carburetor tools. Supposed to be for shindiawa, they were extremely expensive like almost 200 fir tuning..but they dint fit my shindiawa the old or new stuff..anyone interested or mechanic thar might want to grab them let me know..there brand new got them last year by mistake ordering tools..

[@retrodad6864]

Thanks Erica. It’s good to see other makes being given the “back from the dead” treatment. Thanks for sharing. 🇬🇧👍👍👌

[@Allesschrauber]

Hello Yes Dolmar. Here in Germany you saw them often.Most of the time used from older Guys who cam from these years where ther where made.I always heard good things about them. I never owned one unfortunately.Now the time is gone for these saws, but you can get one used for about 200-250 Euro, which is pretty the same in US-Dollar. Thank you for the revival, i liked it. 😍

[@philliphall5198]

Thanks for the information 😊

[@randym8147]

We live in florida, most Canadians just come for the winter it gets really hot during the summer. As for joining us we would love to have you ONLY if everyone wants to. 😂

[@SepticWhelk]

Water damage , bit of emery paper on a bit of flat glass ( I use the top of the cooker ) little circles with oil , sorted .

[@2stroketime348]

I still have dolmars from the 70s stock still run em in my service great saws

[@markperry2476]

In my opinion you are a master chainsaw mechanic 😊 I learn something with each video Please keep it up

[@marriedwithsmallengines]

I appreciate you watching!

[@bluesfool1]

I’ve never heard of dolmar. I’ve never owned a Stihl…. That is until I started watching your channel. I found what appears to be a lightly used but dirty, hasn’t ran in years 026. I’m tickled pink with it. I’m looking forward to seeing all of your 026 videos and I’m trying to make a list of all the part numbers for stuff I probably need to replace.

[@marriedwithsmallengines]

I can’t wait either!

[@StihlTyler]

026 are one of the easiest saws to work on ! And one of the best 50cc saws made

[@sylawunia]

Twoj kanal tez zasubskrybowalam i czekam na filmy 😉​@@StihlTyler

[@williamgoodman6969]

Thanks for showing a Dolmar!

[@marriedwithsmallengines]

You’re welcome! ☺️

[@naznomad635]

I used to own an old Sachs Dolmar... Great saws.

[@kbittorf335]

Well, after watching this channel for some time, my Stihl Satz Prüfwerkzeug arrived today! I had thought about buying less expensive pressure/vacuum testers but decided to go quality. Thank you!

[@MC-ft8zv]

I have a newish Makita EA5600 in teal blue, amazing saw. 55cc ish. Decent muffler mod and tune and it's a powerful, really efficient saw with amazing fuel economy. My main saw for limbing the big old pines here. Great quality, solid, very well finished saw. Love the Dolmars and Solos, no real support for them here so limited to Stihl and Husky really.

[@marriedwithsmallengines]

Nice saw!

[@kdrweld8518]

Keep the productions coming! I know it’s a lot of work to make them viewer friendly, but you’ve always been in that groove!

[@richardglazer7813]

Your price is more than reasonable. Not to mention, he has a nice video to look at!

[@JereMcDonald]

I saw firewood with a triplet of Dolmar saws; a 420, a 510, and a 6100 and love them. I cut from October to April, mostly oak, taking the standing dead down. Felling and bucking with the 6100, limbing and cleaning up with the 420. The 510 mostly sits on the shelf now. I've been sawing with these for over 10 years, and the only problem I ever encountered is a lost fuel cap, that was certainly my fault. I was anxious to see you take the 420 apart, hoping to learn anything I should be doing. Thanks for including one, though I am very cautious of the fuel, the filters, the bar and chain. I enjoy your channel, thanks.

[@marriedwithsmallengines]

Thanks for watching! There is an another Dolmar in my lineup!

[@Duanepa.2]

Hey Jere!

[@JereMcDonald]

@ Duane - been a long time. Hope you are doing well.

[@reloader50bmg]

Live in Orlando FL. play in the snow for a week, come back home. get a tan!😻

[@BrandonBonnell-mj1gm]

Left new england last year and moved to florida. Totally love it new life!!! And love your videos!!!

[@marriedwithsmallengines]

Glad you are enjoying the videos!

[@philliphall5198]

Going to build a Joe tool this spring 😊

[@erniepenny221]

Hello Erica, at one time only had Sachs Dolmar saws, especially 120Si, terrific saws, have original German instruction manual, spark plugs were originally BOSCH WSR 5F, ❤ your content, its our summer our here, lovely 28 deg C days.

[@dennisjensen6142]

Ive always loved the look of Dolmars. They remind me of 1940-50's cars. Classic shapes with the round tops

[@williamtwarog7082]

Hello I am so glad to see you showing your mistakes, and not editing them out. Can you please talk about 2/4cycle off season storage.

[@koyote2e511]

Anyone else here from Australia who love watching these videos just to cool down when Erica goes outside amongst that all that white stuff😂

[@marriedwithsmallengines]

Stop! I’m sick of winter 🥶

[@haneyoakie14]

@@marriedwithsmallengineswe are basically halfway thru!

[@allanford1365]

Yes mate, 28C in Gympie today.

[@koyote2e511]

i can understand why, -27c brrrrrr. Today was a cool day here at 28c with cloud cover

[@koyote2e511]

@@allanford1365been 32 - 35 for the last few weeks inner mid coast NSW . Too much heat. Finally git some cloud cover n rain

[@phillipdean9879]

33 degrees C here in Mulwala! Been in the pool drinking cold beers! Great video, don’t think I’ve ever seen a Dolmar..🇦🇺🍺🍺

[@tywebbgolfenthusiast8950]

Today I found out: “soapy water does a pretty good job of cleaning things”. 😂

[@marriedwithsmallengines]

🤣🤣

[@tah2867]

Hello from Norway. In the next few days I'm beginning as a small engine mechanic. I have some experience but your videos giving me ambitions, joy and excitement to go on with my new line of work. Thanks to humanity, internet and to sweet Erica.😊

[@marriedwithsmallengines]

Amazing! All the best to you and your new journey!

[@akachuck99]

Your videos offer a unique blend of education and entertainment, exploring the history of saws, showcasing repair methods, and incorporating supplementary footage. As a former dealer, you bring a level of expertise to your content, as exemplified by the image you displayed. The Makita blue saw was a fascinating highlight.

[@marriedwithsmallengines]

Thank you very much!

[@donmcconnery5080]

Another successful chainsaw diagnosis and repair is in the books.

[@marriedwithsmallengines]

Yes sir!

[@valpredaracing5803]

Love all the videos! Also forgot to say on the last video would love to see the 260 revival content since you now have so many!

[@marriedwithsmallengines]

I've got plans for it!

[@RaymondRoshak-k1l]

Thank you for the rebuild on the carb amazing what is always in those fuel tanks!

[@hosocat1410]

Florida is great in winter. But the summers are absolutely miserable.

[@garysperling4392]

Liked the history lesson on Dolmar, used to see a few here in Oregon 40 years ago but nothing now.

[@matthewwearsch242]

Never heard of this brand but can tell this saw is a garage queen and is for show not for go but great shakedown and repair 👌

[@tonymiller3788]

Curious as to why you say that. Dolmar makes some pretty good saws.

[@KevinMaxwell-o3t]

What??? You've never heard of Dolmar? Emil Lerp invented the world's first gas-powered chainsaw in 1927. Andreas Stihl is considered the true inventor of the chainsaw itself, but his was electric, powered by a generator at the end of a long cable. Dolmar has been building great saws for almost a hundred years. But Makita bought them in 1991 and is retiring the name, so you won't see them much longer.

[@matthewwearsch242]

@@KevinMaxwell-o3t great historical lesson I bought a Makita battery operated drill/driver once and now I'm a Milwaukee guy

[@dawn20]

I had a Sachs Dolmar saw back in early 80 s

[@arthurwilliams1922]

Hello everybody!

[@robertcochran7103]

Thank you for posting this excellent video. Dolmar is an unfamiliar brand for me, but then using chainsaws is an unfamiliar activity for me. I noticed the vertical marks on the cylinder wall as well. Thank you for teaching me that if there is water in the gas, it can freeze up and affect the carburetor. I've seen James Condon do so many carburetor disassemblies and cleanings that I keep expecting you to say "I will put this in my ultrasonic for 5 or 10 minutes" or something similar. I guess Walbro carburetors are used in a lot of chainsaw brands. Thank you very much for showing the Dolmar saw, and for letting us know you are a former Dolmar dealer, too. By the way I get the sense you really like the curburetor stand from Joe a lot 🙂

[@jeffclark2725]

Good Morning, Dolmar day, Glad to be here, Great repair day

[@marriedwithsmallengines]

Good morning! I'm glad you are here for the repair!

[@jeffclark2725]

I was a Dolmar dealer back years ago when Power Distributors was the selling wearhouse in Washington state,still have a few parts around, few of the small bars,you have snow there

[@smallenginediagnostics9350]

It is great idea that you are telling people what the costs are to get the saw running. 49 Degrees in South Texas, right now.

[@ronbeatty516]

And 120 degrees in the summer! 😅

[@PeterTurtlebury]

I like your job costing that the end of the videos.

[@magicone9327]

Dolmar/Sachs made motorcycles which I had one back in the late 60’s. It was a very dependable machine.

[@Ron-0417]

I'm here just below ya a little bit in western NY. I have relatives who live in Florida. We go there in the spring. It usually only gets up to the 90's when we are there. You go in the summer and the heat and humidity just about kills a northerner. Then you have hurricane season all fall. I'll take the snow over those.

[@StihlTyler]

I agree with that ! Those hurricanes look awful to live through

[@ovemalmsten9706]

Bra jobbat,det största felet tror jag var vatten i screensilen, den gick ju hyfsat innan du packade om förgasaren. Jag har jobbat med motorsågar i 47 år, numera pensionär, gillar dina filmer!.❤

[@almclean4835]

Haven’t seen many Dolmars in the UK, don’t know why they seem decent enough saws. Nice job Erica

[@marriedwithsmallengines]

Thank you!

[@davidabernathy4553]

Well now this was an interesting video and I must admit I have never heard of that chainsaw. I think the customer should be happy. You did an excellent job and he got a good running chainsaw back for a very reasonable price. I can't say that I like the look of the cylinder wall but it's not horrible.

[@StihlTyler]

If he ran it any longer with those bad diaphragms it would be worse , he may have stopped using it right in time .

[@hdhhc5555]

I wanted a dolmar 7900 but they quit making them. So i went with a ported 500i. Its a beast of a saw. Not kidding. Lol

[@StihlTyler]

Those 500i are hard to beat now , I personally have no seen any major failures yet .

[@hdhhc5555]

@StihlTyler people complain about the air filter letting in fines.... as they look at the bottom... they must not realize the round rubber grommet that goes over the stack. Lmao. Can't fix stupid apparently.

[@MrMysterious-y2z]

My Makita EA5600F came with a NGK BPMR7A spark plug from the factory. I guess Australia would be the same as other countries.

[@amillerde]

Thank you for another informative and entertaining video! Enjoyed the repair and especially the history on the Dolmar/Makita saws. That fuel deserves a place on the "shelf of shame"!

[@philliphall5198]

This is why I enjoy watching you, you don’t take a chance with any thing going wrong 😊

[@jakeschisler7525]

I grew up in Illinois and I retired 14 years ago and we moved to North Fort Myers and stayed in that general area until 2021 we moved to Missouri. The summer's down there were hot and most of the time there is no rain, after we were there 4 years moved to a house with property and had an inground pool put in. If we got overheated we got in the pool. My wife was still working and hated the heat, so we bought a place out away from everyone with land and for us it's great. Now I'm not crazy about when the temperature goes below 30 but it's okay too. Today in north Fort Myers it's 58 degrees. I've seen it colder than that.

[@jeffreyhelms9507]

I hope you can do a video on the echo cs-5310, I have one and love it, it’s a small saw that can do a lot of

[@robmacdonald9395]

I'm glad you are here, not Florida.... great job on the video AGAIN ! ! ! !

[@marriedwithsmallengines]

Ha, thanks Rob!

[@bigmoustacheal3295]

Never seen a Dolmar before. Looks easy to work on.

[@kbittorf335]

And then there is Solo, that were made near Stuttgart in Stihl territory! They actually had a facility in Newport News, VA before Stihl was in Virginia Beach.

[@rodneymiddleton9624]

LOL!! The news!!!! I never think I want to live in the cold. We are going to get snow and ice on Friday into Saturday with temps in the 20's to 30's Fahrenheit. Thank you so much and great job!

[@jackgreenlund9904]

I love my Dolmar saws I have 2 5105s they came with ngk spark plugs. Love your channel.

[@marriedwithsmallengines]

Thanks for watching!

[@Sethhaun78]

Must be later versions

[@philliphall5198]

Wish they were still made and I would buy one 😊

[@magicone9327]

Can’t wait for the 026 marketplace!

[@ronbeatty9761]

Wow, that throttle response is amazing with the new carb kit. Thanks for history lesson about this brand of saws. Increase your prices. You do great work!

[@marriedwithsmallengines]

Thank Ron!! The cats are loving those beds these last few days - sooo cold here!

[@PDAUSRC]

Soapy water is a good idea as first attempt cleaning manufacturers labels. Learned the hard way not to use solvents first on this important info, some don't have a decent laminate on them. The entire printed data disappeared in one swipe on something i cleaned once, no information recoverable. 😢😢😢

[@marriedwithsmallengines]

I’ve done that too! I always try water first before getting too harsh.

[@famasmaster2000]

Awesome fix !! That saw is a little ripper , actually really nice little unit. Nicely done Erica 👍

[@marriedwithsmallengines]

Thanks! 👍

[@riprap509]

Enjoyed watching you go through the Dolmar. I have several of them. They are very dependable, never any problems. Thanks Erica

[@marriedwithsmallengines]

Thanks for watching!

[@Juzzy520]

Absolutely well done….. But i think the carb stand needs bigger rods to stop carb wobbling!! Im thinking M6 carb bolts, long ones?? 💪💪🍺🍺🥰🥰👍

[@KensSmallEngineRepair]

The NEW Walbro "W" depth gage is part number 500-528

[@marriedwithsmallengines]

Hi Ken 😊

[@KensSmallEngineRepair]

@@marriedwithsmallengines Good Afternoon Erica

[@philliphall5198]

Ken , what is different about it from the other ???

[@KensSmallEngineRepair]

@@philliphall5198 The new one has depths for AT carbs and all the Wxx variants, like WTB, WLC, WTE, WTEA, WTF, WYD, WYG, WYGA, WLB, WYB, WYC, WYE, WYLA, WYLB, and the depth for the Fulcrum Button on their new Spiral Diaphragms. Walbro lists the depths on their website but the gages make it a lot easier.

[@brianholk6712]

Can’t wait 👍

[@shoeshow1999]

Hi Erica. Well we are expecting our first snow fall in 2 1/2 years. Some people here in NC panic and run to the grocery store for milk and bread. I have never figured out what you can do with those two items but they clean out the grocery shelves. Close the schools and buckle down for the 1 to 2 inches of ice and snow and try to figure out what the milk and bread is going to make. Thanks for the video.

[@robertwaid2965]

Nice dolmar video, dont see many around anymore here in NY...

[@philliphall5198]

I seem to forget to let the pressure of nearly every single day 😢😢 At least the first one lolol

[@jimhancock5047]

I remember when Dolmar was Sachs Dolmar. That gas mix was nasty!

[@marriedwithsmallengines]

It sure was!

[@anthonyland400c]

Dolmar, the chainsaw that won't run away when you sit it down idling

[@TheVespap200e]

Love the four seasons of Canada! Would not change it for the world! They can keep the hot and 100% humidity of Florida. Just my 2 cents! Thanks for the video Erica.

[@marriedwithsmallengines]

Thank you!

[@jamesmooney5348]

That's a very fair deal! Good job.

[@randym8147]

Love your outdoor shots.

[@bobkernahan6340]

thanks for your time and videos I live in north florida now and used to live in upstate NY , i miss the snow and fall weather some but not the bitter cold , last night here we hit 27 degrees which is cold for us and we have a much higher humidity so it goes right to the bones lol however most of the year you can go out in the morning in just shorts and tee shirt and that is nice but summers can be brutal thanks again and God bless

[@marriedwithsmallengines]

Thanks for watching, I’m glad you enjoyed the video!

[@Tom-Harpur-meditation76]

Apparently Dolmar came out of the factory with NGK spark plug fitted. Here in Ireland parts of the country had a few feet of snow and places came to a halt even though our night temps are down low last night -8 in parts but it’s a damp cold I’ve spoken to Canadians and they’ve said it’s bone chilling cold. 🤷‍♂️ great content as always Erica thoroughly enjoying the videos.

[@marriedwithsmallengines]

Thank you!

[@SimpleLife1971]

My #1 chainsaw channel thanks to you Erica! Your approach and clarity are 2nd to none Erica so thank you very much one again! 😘

[@marriedwithsmallengines]

Aw, thank so much!

[@pwleppa]

A few years ago I managed to lose the air filter and its cover in a very dense bush area. I found the cover but not the filter. The air filter at Dolmar's Finnish importer was quite expensive, approx. 30 euros/US dollars. Well, the main thing is that the importer found one right away on the counter. After that, I always made sure that the cover was properly closed. Dolmar's engine runs really smoothly. If you put a Stihl saw on the ground while it is running, it will move around. Dolmar, on the other hand, pretty much stays put. After the PS-420 C model (2.0kW), Dolmar introduced the SC model, where the engine power was increased to 2.2kW. The last SC-420 saws were made in China instead of Germany if the info I received was correct. I bought my Dolmar 420 in 2011 and I really like it. It seems to have good torque for a 42cc saw. Parts are cheap, last year I bought a new Dolmar 13 inch bar for 13 euros/U.S dollars and Makita .325, 56, 1,3mm chains were 5 euros a piece on sale. Well, I bought quite a many chains as they are quality stuff.

[@marriedwithsmallengines]

Thank you for all of this! There is so much to learn from all of your comments!

[@kbittorf335]

I have a PS421 that I bought used almost NOS. It had a cat in the muffler but it was very easy to open up and allow it to escape. The high jet is filled with Epoxy but the saw operates within rpm parameters. I am now curious to see if my saw has open transfer ports like this one. I understand Dolmar technicians assembled each saw start to finish unlike assembly line fashion. I was told by a former dealer here that back in the day Dolmar would cast cylinders for Husqvarna as well. The saw named after the mountain in Thüringia whose forests the prototype units were tested in nearly a century ago. 👍

[@StihlTyler]

I remember those epoxied H jets - those were not a great idea - I found many PS5100s needed a slight tweak richer from what they were set at . The later 5105s used a D shaped I believe H jet which made things better .

[@kbittorf335]

@ A used 5105 was the first pro saw I purchased. I sent that muffler away to let the cat out and the guy did a great job on it. It will pull a 20” .325 bar better than my 550xpg. My guess is Makita was trying to pass emission regulations with cats and tamper resistance screws and attempted newer tech with the 6100 but just couldn’t compete. Their 60-80cc saws were top notch.

[@DennisBall]

Great video! Can't wait to see the 660. I use a clone 660 to mill lumber here on my property. A couple years back I used a 42 inch bar on the clone to mill a 36 inch oak stump into boards.

[@marriedwithsmallengines]

She’s coming up soon!

[@fsimons6]

Once again, I think that is a very reasonable repair cost. Keep up the good work

[@marriedwithsmallengines]

Thank you!

[@yaesu101ee]

He should be thrilled at the price.

[@notajp]

I would have expected a German built saw to have a Bosch plug…

[@Mrtinkerr]

We have stayed in the Tampa area from central Illinois for several years. No lack of French Canadians in this area.

[@mikesgardenmaintenance4016]

My very first experience was 40 years ago as a teenager with my father in our small forest with a second-hand Dolmar saw. These are not good memories. The chain regularly came loose, it started badly and it kept flooding when I tried to start it. Back then, I obviously didn't know as much about saws as I do today. Today, I could help myself better. Maybe it's because I only work with Stihl products these days... Thank you for your great videos.

[@slippityslopity]

Appreciate the thoroughness of the videos. Also, thank you for maintaining a playlist of the different chainsaw videos.

[@jimgroulx3956]

The Dolmar seems to be a solid reliable saw. Thanks foe the video.

[@Syncop8rNZ]

I haven't seen any Dolmars here but I believe there's one or two around. Good to see some kitty content.

[@truckman19771000]

Outstanding job. I enjoy watching you work on different models of chainsaws. They are so interesting. I have an Sthil chainsaw. Love it. But I’m so interested in other types.

[@marriedwithsmallengines]

Thanks for watching!

[@mattw5729]

Another excellent video! Thank you ma'am!

[@marriedwithsmallengines]

I'm glad you enjoyed it!

[@jodydewald19]

Here in central PA, I've seen some of the teal Makitas on Marketplace, but have not seen a Dolmar(yet).

[@JimPalmgren]

It would always be a good investment to have a saw repaired by you

[@marriedwithsmallengines]

Thank you!

[@bonniekennedy6969]

Great repair Erica ,it’s a wonder that saw even started with those old crusty carb parts. Do you tell customers to dump out the old stinky, watery, cloudy fuel to prevent the same poor starting condition all over again.

[@marriedwithsmallengines]

We talk about fuel here until we are blue in the face. I think they all “know” what they should be doing but just don’t do it or forget to.

[@AmandaGelien-gd8kd]

Good Job & saved the saw thats a Bargain Erica

[@Syncop8rNZ]

Typically 30°C max in Summer down to 0°C min (10-15°C daytime) in Winter here in the middle of NZ.

[@troy3052]

You are creeping up to 25,000 subscribers!! Great video again!!

[@marriedwithsmallengines]

Yah!

[@johnkinnane547]

G’day Erica I have never heard of that chainsaws, it was a good fix I can’t believe how cold it is where you are. I would be in sever pain in your temps but you have nice summers good to see you again kind regards John

[@kelvinpen3144]

I knew a retired Logger here in the states that ran a Sachs Dolmar with a 24”+bar if my memory is correct .

[@StihlTyler]

Dolmar made some saws over 100cc back in the 70s/ 80s I believe and a 90cc into the 90s / 00s