Thank you for making the video. I’m having the same issue with my 95 6.5 also. The shop would take my appointment either , told me that it’s the “Bad child of all “ but I’m not giving up! I love my truck.
@stevenbean97064 жыл бұрын
Should just do the whole pump with an updated version
@MichaelMaloney14 жыл бұрын
Thank you for making a very helpful video. I have a 6.5 for the last 16 years. Great machine. I never changed that sensor but I am delighted to know more about it.
@greenthumb68753 жыл бұрын
Your the best, I followed it to a tee, except I advanced pump forward. What a increase in power…
@MarshCreekFarmOffGrid2 жыл бұрын
Great job!
@betobringas15862 жыл бұрын
Marsh creek u have web site of optical sensor thanks!! Nice job
@13yearsaprepperr.jtilbury.515 жыл бұрын
great vid brother , I had the No power problem all i did was move the OS to the passanger side that advanced the timing by 2 deg now runs sweet as , Thanks again merry christmass Oh you have a very cute daughter she looks like my little girl ,,,, always helping .... R.J.T Traveling east coast Australia ,,,,,,
@Hitman-ds1ei5 жыл бұрын
They only thing to add is cleanliness people, clean clean clean before you pull apart, if its real dirty pinch some of missus oven cleaner and spray first to loosen up tough grime and then spray with carb cleaner or if stuck some white spirit cos any little bits fall in ca ruin the whole show, when professionals make or repair these they are done in a "clean room " environment so give yourselves the best chance of success
@daddyhobo29 ай бұрын
Great tip. But I would advise against carb cleaner. That will destroy any rubber o rings or gaskets or sensitive sensors and connectors. Brake clean is a better alternative.
@eduardoandresrojasgauto762 Жыл бұрын
Gracias por hacer y compartir un video tan útil. Desde ya te comento que gracias al vídeo puede conseguir el repuesto y poder solucionar el problema. Desde Paraguay 🇵🇾 saludos!
@leontaylor35727 жыл бұрын
I was having the same issues and I mean exactly. I changed the fuel filter and nothing. I changed the air filter and it fixed it. No one ever says to change that and air flow especially under a load like putting it in gear is EVERYTHING I repeat E V E R Y T H I N G. Auto experts do not impress me. I'm not talking about you. I thank you for this video
@nou82575 жыл бұрын
Always check the simple stuff first most so called mechanics or techs should first ask you about air and fuel filters and simple things in general but now of days everyone just replaces crap till it either fixes it or they run out of money.
@TheMcdrewb5 жыл бұрын
👀
@Flightstar8 жыл бұрын
Thanks for posting about this optical sensor thingy, there's not a lot of good information on the workings of these pumps and it's frustrating. Be interesting to do a post mortem on this sensor to see why its failed, if that's possible. Expensive little unit.
@MarshCreekFarmOffGrid8 жыл бұрын
videoclipits Thanks. there's not much to look at with the sensor. ill see if i can find the old one and make a whats inside the optical sensor video.
@Flightstar8 жыл бұрын
That's a good idea. Ill look forward to seeing it ,if you produce it.
@MarshCreekFarmOffGrid8 жыл бұрын
videoclipits ill have to find the old one...hopefully i can
@MarshCreekFarmOffGrid8 жыл бұрын
i looked for the old sensor but didnt have any luck finding it yet. ill keep trying to find it
@13yearsaprepperr.jtilbury.515 жыл бұрын
@@MarshCreekFarmOffGrid There is only 2 components one is a Infered LED (light emiting diode ) and the other is another LED that picks up the flick of infared when it shines thru the small holes in the rotating plate , There is really nothing to see inside Nothing to fix either ,,,,,, Have a great day
@Monuments_to_Good_Intentions4 жыл бұрын
I had those same issues, and it ended up being a loose/wore out fuel line. Fixed the problem. Mine happened to be the main supply between the filter and injection pump. I was able to twist it by hand. New hose and done. Now I am throwing this optical sensor code, time to replace it
@WildAthletics2 жыл бұрын
Changing the Optical Sensor cleared my P0251 and P0370 Codes. I've heard air in the fuel line or water in the tank can cause the same codes, so make sure that isn't your issue first.
@davidjewell91973 жыл бұрын
Good video just bought a 1997gmc truck with the 6.5
@smarternu3 жыл бұрын
Things evolve to be more complicated then they need to be. Pure mechanical pumps work fine, no computer control needed. You can adjust the injector timing to increase power or economy. I might dump that pump for a 1991 or older pure mechanical, but no need now that it's fixed.
@tomsteffs65113 күн бұрын
Great video, thank you
@ClaytonWoody Жыл бұрын
Like what kind of issues? Like random surging? Stalling in traffic? Sometimes it starts back up sometimes it doesn’t? Replaced pmd was good for a day
@JD-nx6by5 жыл бұрын
Would have been really great had you provided some really good visual clarity on that scribe mark. Seems like that's a critical issue and would be really nice and helpful to have some clarity on exactly what the reference marks are aligning!!
@keenanleetodd4 жыл бұрын
The optical sensor is held down by a bolt. It slides left and right.
@Imageloading...4 жыл бұрын
Surprised to not see comments or talk in video of the optical "bump" Also, i wonder why people dont use feeler gauges on either side to verify it goes back in same spot, also the same to adjust optical "bump" After i sort out a few things and do some long overdue maintenance ill be doing the "bump"
@stanwilson75664 жыл бұрын
Is their any way I can test this unit? I keep having to replace my PMD. 5/28/2020
@pippianderson24855 жыл бұрын
So it’s been 2.5 years give or take, how has it ran since doing the switch? I’ve had the same problem in my 6.5 and replaced everything like you have and still get problems here and there. It’s frustrating
@rickvenlo13625 жыл бұрын
Pippi Anderson 24 check your ground wires at back of block and ignition switch
@juansolis94092 жыл бұрын
great vid. thank you !!
@MarshCreekFarmOffGrid2 жыл бұрын
You're welcome!
@rezkiz29302 жыл бұрын
I have some fuel down in that area and I am tolled injection pump possibly leaking. It's just a little fuel sitting there. Any ideas?
@MarshCreekFarmOffGrid2 жыл бұрын
You might just need to replace the fuel lines under the air intake manifold
@jackmoves763 жыл бұрын
After you change the sensor... do you have to set or re learn the crank position sensor? Ty
The only thing I would have done different tape off the opening of the lack of a better word Intake. Drop one nut or bolt and it's game over...
@bryanst.martin71349 ай бұрын
I own one, and trying to shoehorn it into my C class camper. Ford based... But mercy! That 460/C6 sucked a hefty 5 mpg! This kit may push 20! But the real reason I posted this, is that is one ugly intake! "But we have to fit it under the hood of a Corvette!" Velocity is a plus, but the "plenum" slows it down "to build pressure", instead of letting velocity fill the briefly open cylinder.
@MichaelMaloney14 жыл бұрын
Did you ever drain your tank and check the wire gauze ?
@garycasper29294 жыл бұрын
What ever happened to that flashlight you where getting.?? It's hard to see anything down in that well. But, I think we get the idea. ThankU for the upload..!
@stanwilson75664 жыл бұрын
Will I need gaskets for this job and if so where do I get them? 6/2/2020
@LordHumungusFL4 жыл бұрын
No the gasket is reusable
@jorgefonseca92257 жыл бұрын
hi I have a suburban 95 model with the same motor as yours a detroit L65 turbo diesel. my engine fails, always when I press the accelerator pedal a little more !! Will I have to change that sensor? Can you tell me what the problem is? and make a lot smoke!! i put a new injectores a couples weeks ago but nothing happens!! thanks for put this great vedeo cheers from portugal
@MarshCreekFarmOffGrid6 жыл бұрын
go to this forum sixfiveturbodiesel.com
@jorgefonseca92256 жыл бұрын
thanks mate for answered cheers from norway
@robertscottII7 жыл бұрын
I have a 6.5 that has a "run away" throttle. It's either idle or full throttle nothing in between. Runs fine on level ground but anytime you go down hill it can't maintain speed. So you end up bumping the throttle up and down. Can't hold any RPMs in park. However when I unplug the optical sensor and start the truck up I can hold RPMs in park. Starts rough and drives with lack of power, but I regain control of the throttle again. I've been told I need an injector pump, but I'm wondering if it's the optical sensor. Any idea?
@1981rockey7 жыл бұрын
I have the exact same problem i tried all 3 of my pmd's nothing changed one of the pmd's was from a running truck nothing changed so we are swapping out the complete injection pump im not sure if just an optical sensor would have taken care of it i will post when we are done putting it back together and we will see how it runs
@MarshCreekFarmOffGrid6 жыл бұрын
sounds like the optical sensor is shot to me
@KIDHLRGarage6 жыл бұрын
Maybe you’re accelerator petal
@mrguy49524 жыл бұрын
@@KIDHLRGarage HAd same problem, I lossend and move the plunger valve in center ans whallaa. Later to remove it and locate an Oring
@ClaytonWoody Жыл бұрын
@@1981rockeydid it work?
@hernangiordano1336 жыл бұрын
hi could you tell me the part number of that sensor
@Wec898 жыл бұрын
where were you able to buy the optical sensor?
@MarshCreekFarmOffGrid8 жыл бұрын
Chase West search ebay for 6.5td optical sensor. only one place had it available out of florida
@ribbone19756 жыл бұрын
Thanks. Good to keep in mind
@thomaswilliams95418 жыл бұрын
nice job, great video
@MarshCreekFarmOffGrid8 жыл бұрын
Tom Williams Thanks!
@brentschwagly84544 жыл бұрын
Ive been having A weird studder on and off and i find i've lost power. One video i watched the guy slide the optic sensor forward and he said it made a ton of difference. What do you know about that line of thought?
@mariustudoratlantageorgiau81427 жыл бұрын
great job on the video
@stanwilson75668 жыл бұрын
What kind of fuel pump did you say and where can I find it?
@MarshCreekFarmOffGrid8 жыл бұрын
Stan Wilson , the fuel pump is a raptor. www.pureflowairdog.com/raptor.php got mine on ebay
@Imageloading...4 жыл бұрын
It took 6 years for an off the shelf lift pump from pep boys to finally go bad for me
@bastarddoggy8 жыл бұрын
I have a '99 6.5 'Burban, too. And I love that truck. I just hate the whole fuel pump/PMD combo. Having been through a couple of pumps, one under warranty, and just gotten the remote mount PMD installed, I still don't trust it. My mechanic told me it is possible to replace the whole electronic system with a manual pump from the old 6.2 GM diesel. Several parts are needed and can be gotten off the GM Vandura diesels. 1. The pump and injector lines 2. The throttle pedal and cable assembly with brackets 3. The computer for the 4L80E transmission Have you ever heard of this conversion?
@MarshCreekFarmOffGrid8 жыл бұрын
bastarddoggy yes i have heard of that. check the sixfiveturbodiesel.com forum for more info.. ive never done a conversion
@carlberner37976 жыл бұрын
You don't need to use anything from the 6.2L, 92-94 6.5L is a Mechanical pump system that bolts in with Minimal effort
@joeyelswick17966 жыл бұрын
Hang on if ya ain't already let go!!
@crazymayne695 жыл бұрын
If you do not time this correctly will it damage the injection pump? I just had taken my 2000 chevy k2500 to the mechanics after i had replaced the optical sensor but was still running a little funny. They told me it was idling a little high, though I'd been driving it around and even used it long distance several times, including driving it to the mechanics. Several days go by and they call saying they had taken the whole front end of the engine apart and now it doesn't run. Theyre saying it needs a new injection pump and saying that because it wasnt timed correctly that caused it to fail.
@randywoodward97073 жыл бұрын
Everyone always wants to replace the injection pump but that is rarely the problem
@GaditeKing7 жыл бұрын
Whats the torque spec on that 40torx bolt that holds the optic sensor
@MarshCreekFarmOffGrid7 жыл бұрын
dont know
@Imageloading...4 жыл бұрын
Till your wrist or elbow goes *click* lol
@steve197454 жыл бұрын
What do you do when the optical sensor hold down wont hold the sensor down, threads arent stripped little spacers still on hold down block you tighten it down and it still floats !
@williammcclellan89885 жыл бұрын
I have a 1997 3500hd starts and runs great even pulls car trailer with a 3/4 ton 1972 full body chevy mudtruck good until you start up any hill big or small losses all power but has no trouble pulling out from a dead stop compression is good?
@Monuments_to_Good_Intentions4 жыл бұрын
William Mcclellan did you check the waste gate? That was my problem like you are describing. Ended up being a bad wire on the module that controls it. KZbin 6.5 chevy waste gate trouble shooting
@nellyfarnsworth73815 жыл бұрын
Look at the tan color film on everything inside the injection pump. That is WHY, the OPTICAL sensor does NOT work. Just CLEAN the two lenses. The emitter and the receiver. The L.E.D. light must shine on the receiver, to trigger the injection. The fuel is DIRTY, is your fuel tank RUSTED inside???? Soon the film, will coat the lenses again. Replace the tank and metal lines.
@domeniclarosa61564 жыл бұрын
what exactly is safe to use as a cleaning agent for the things you stated? carb cleaner? thanks
@francisstorry67536 жыл бұрын
Didn’t see where you put the scrlb mark, thnx
@steve197454 жыл бұрын
Cause he didnt use em he just guessed he didnt get a flash light to show you the inside either
@stanwilson75666 жыл бұрын
Marsh, I didn't find anything on Roy Halvorsen . 7/10/2018
@MichaelMaloney14 жыл бұрын
Where did you buy the optical sensor and how much did it cost ?
250.00 ? You can get a whole rebuilt pump for a 99 6.5 for another 250.00 should have just replaced the whole pump. Thats nuts that they charge so much for that sensor and the whole pump shouldnt even need it they should make it all mechanical all that junk plastic crap is just going to break.whybany engineer with a degree in anything of use would engineer such junk is a mystery ill stick to my 72 chevy or 77 ford with all metal parts no junk plastic crap thats going to break every couple years. Everybody was fast to crush all the older cars cause they didnt want people to know what quality is then everybody would expect nothing but quality thereafter
@tomfelts8980 Жыл бұрын
Where can u get one rebuilt for that??
@stanwilson75668 жыл бұрын
I'm trying to print out the instruction but when I do its not printing the pictures with it, How did you get the pictures to print out. Also what this optical sensor do for the injector pump and was the fuel line you took off, was it a supply are return? Thanks Stan. 12/01/2016
@MarshCreekFarmOffGrid8 жыл бұрын
Stan Wilson I didn't have any trouble printing the website and it printed with pictures so I'm not quite sure what the problem is on your end. the fuel line that goes into the top of the pump is the supply to the pump there's no return off of the pump. the only Returns come from the fuel filter housing and the injectors
@MarshCreekFarmOffGrid8 жыл бұрын
Stan Wilson the optical sensor tells the pump. timing
@stanwilson75668 жыл бұрын
Marsh Creek Farmstead , this is what is going on with my 6.5 diesel in my 96 3500. If I drive it at 50 MPH for 10 too 15 miles the engine will start fading out and will stop running, If I run it at 60 too 70 MPH it will only run for about a mile are so and just stop running. I changed the fuel pump and pump relay fuel filter. Do you know of anything I can check are do? Stan 12/01/2016
@MarshCreekFarmOffGrid8 жыл бұрын
Stan Wilson does the truck start up after it dies easily or does it take cranking? have you checked your fuel pressure from the lift pump? should be 5 lbs.
@MarshCreekFarmOffGrid8 жыл бұрын
Stan Wilson have you changed your fuel filter?
@johnnyfastt7 жыл бұрын
Good video. What codes were u getting?
@rogernorris76125 жыл бұрын
What is limp mode.
@nou82575 жыл бұрын
It limits the power you get aka the fuel and some vehicles that are automatic will also limit which gears you can be in.
@inthemountainswithmeachum32567 жыл бұрын
awesome vid
@genaromartinez9867 жыл бұрын
CAN YOU SEND ME THE PART # FOR THE PMD
@maxhertz80534 жыл бұрын
Deadly
@jeffleblanc88506 жыл бұрын
Don’t forget heads crack and they blow head gaskets they won’t even keep the blocks and heads for a recore they just scrap them
@jeffleblanc88505 жыл бұрын
I don’t get it I’ve never had a problem with lift pump it’s your pmd if it is running fast then it slows down and speed up or don’t start lots of diff scenarios try your optical sensor I would have used a used one from scrap yard and most don’t have to many problems with optical sensor it’s hard to scribe a line I don’t think it matters if you are off a bit thers guys that turn them up to make truck faster it’s hard to scribe
@Imageloading...4 жыл бұрын
Lift pumps definitely fail frequently for some. Took 6 years for a generic off shelf unit from Poop Boys to go bad for me. Apparently people have them go bad a lot though
@Imageloading...4 жыл бұрын
Also, i wonder why people dont use feeler gauges on either side to verify it goes back in same spot, also the same to adjust optical "bump" After i sort out a few things and do some long overdue maintenance ill be doing the "bump"
@lloydburton24316 жыл бұрын
so ..no gaskets involved
@jeffleblanc88506 жыл бұрын
There’s a line very hard to see got to really look
@damonens94784 жыл бұрын
Is there just the optical sensor under that injection pump cap? One of those t25 torx screws sheared inside the hole, not sure what to do about it. Can I drive it like that?
@chadcornelison26396 жыл бұрын
Anybody know where I can get a new optical eye for my 97 6.5
@TheMcdrewb4 жыл бұрын
Chad Cornelison rock auto?
@steve197454 жыл бұрын
Dont bother getting a new one just go to ebay and buy a whole pump for 475.00 the sensor alone will cost you almost 300.00
@ss442es7 жыл бұрын
Thanks for the video. Can use the advice.
@mattbledsoe36104 жыл бұрын
555rr5t5 555555555555555rr5r 5 5 yr 5555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555 t 6
@jaimebravo19628 жыл бұрын
same things happening with me new pmd new ops, turns over won't start couldn't find anything toke it to auto electric shop no electrical issues
@MarshCreekFarmOffGrid8 жыл бұрын
jaime bravo try disconnecting the optical sensor on top of the pump when I did that the Suburban started it took a little bit longer to start I had to crank it for 10 to 20 seconds but it did start with the optical sensor disconnected.
@jaimebravo19628 жыл бұрын
Marsh Creek Farmstead well I disconnected it still nothing but I found a 6.5 that over heats for 600 bucks :D I'm going to change the pump and post how it it goes my trucks in better shape than the other one so I'll post up what happens nxt really hope it'll turn on
@jaimebravo19628 жыл бұрын
mines a 97 the ones a 95 but hopefully the pumps should be the same I looked it up and I think it will match up here's trying
@MarshCreekFarmOffGrid8 жыл бұрын
jaime bravo sometimes its best to move on...
@jaimebravo19628 жыл бұрын
Marsh Creek Farmstead I've had it since 99 plus all the maintenance would goto waist I just put six tires on it
@maxinecreamer7416 жыл бұрын
MY COVER BOLTS WERE T25 TORX
@Imageloading...4 жыл бұрын
*WHY ARE YOU YELLING* And when he was putting it back together he clarified that they were t25
@joshenloe3735 жыл бұрын
Losin tht bolt in the bottom of the housing and move it to the middle it’ll wake tht truck up don’t have to line it back up your welcome
@NATIVEbusiness385 жыл бұрын
What housing are you talking about? The t40 bolt where he said to mark it where it holds the optical sensor in
@joshenloe3735 жыл бұрын
Yes the t40 bolt move tht whole internal assembly over to the left just past the middle it’ll make tht truck a whole new animal
@joshenloe3735 жыл бұрын
I did it to mine I can spin tires threw 2 gears now
@JamesDavis-rz2cq5 жыл бұрын
@@joshenloe373 holy hell I'm doing this with the new set of injectors. Any problems yet?