RC-Factory, Crack Yak. FOAMY FUN!!

  Рет қаралды 32,374

Martin Pickering

Martin Pickering

Күн бұрын

Пікірлер: 43
@reckemroysrc3764
@reckemroysrc3764 5 жыл бұрын
Nice it's good to see you build it as well as fly it Martin. You are an Ace pilot. 👍🏻👍🏻😎👍🏻👍🏻
@EleanorPeterson
@EleanorPeterson 4 жыл бұрын
FUN! Seeing you with a big grin reminds me of a professional orchestral percussionist I once knew. His day job was playing modern classical music - unbelievably difficult and complicated technical stuff on drums, marimbas, xylophones and glockenspiels. When he wasn't working he'd spend his time at a local jazz club, playing drums with a quartet. Totally different, and he could really let his hair down. Boulez or be-bop. Big jets or foamies. It's the same thing! :-)
@reptilewizz
@reptilewizz 3 жыл бұрын
I love love watching you fly and listening to your content!!!!
@jayashreedhone7692
@jayashreedhone7692 5 жыл бұрын
Its stunning🤐. These models are really cool for beginners and professional too👍
@maxmorgan2297
@maxmorgan2297 4 жыл бұрын
Agree 100% it is so nice to train the new maneuvers with them;) And a lot cheaper.
@regularguyrcreview8686
@regularguyrcreview8686 3 жыл бұрын
Nice flying! Mine just came in the mail Today, can't wait to build it!
@MartinPickering-PickeringRC
@MartinPickering-PickeringRC 3 жыл бұрын
Nice!! Currently finishing a new video with mine!
@ronstewart9792
@ronstewart9792 5 жыл бұрын
Great 3-D flying, What fun. Ron
@bradharvy13
@bradharvy13 5 ай бұрын
Loads a fun!. I may get another. I have had probably 4 ta 5.... lol. There servo package and esc motor combo are spot on. 2s is best, bigger prop, more floaty. 3s, ehh. With the bigger prop lol, but it will over heat..
@georgipartsalev6193
@georgipartsalev6193 2 жыл бұрын
That knife edge out through the door! XD I have just ordered one and a load of batteries for it!
@3v1Bunny
@3v1Bunny 2 ай бұрын
in the future I bought one now and as an acualt noob (to anything aroebatic).. this plane is awesome!
@I_am_archie
@I_am_archie 2 жыл бұрын
I just ordered the crack yak 55 along with all the goodies. However I did get two 600mah batteries. I may try and swap those. Probably should of gotten all the same batteries 450mah. Hope I can build this thing.
@vihreelinja4743
@vihreelinja4743 2 жыл бұрын
mine hower better with a 600mah 2s than the suggested 450 2s. might be hotglue counterbalance issue :D
@michaelpetale6872
@michaelpetale6872 5 жыл бұрын
You’re just amazing MP!👌👌🏆🤗 Loved it
@sjoerd16f
@sjoerd16f 2 жыл бұрын
Nice! How do you prevent te plane sticking to the table while using the CA?
@leighbarron7013
@leighbarron7013 5 жыл бұрын
Nice one mate. Keep em coming
@jimibar12
@jimibar12 5 жыл бұрын
Martin, I have a question for you if I may ask. I have an RC factory Extra and I can hover and do harriers pretty easily, I also have an EF Extra in 60inch and it is way harder for me to harrier and hover. Is it normal ? Foamies are way easier to fly ? Or it's only a matter of dialing the plane ?
@epoweredrc
@epoweredrc 5 жыл бұрын
Yes Foamy are way way easier to fly. It just takes practice with your 60" plane. Keep trying, over and over till you get it. Every plane hovers different also. Easiest bigger plane i have ever flown was the Flex innovations Mamba 10 it does everything so well.
@Plydrms
@Plydrms 2 ай бұрын
What size wingspan is that one...the 32"?
@epoweredrc
@epoweredrc 5 жыл бұрын
Great flying.
@svenbardos6637
@svenbardos6637 5 жыл бұрын
Best thing with the 6mm foamies is that you don't have to install a bazillion carbon rods.
@maxmorgan2297
@maxmorgan2297 4 жыл бұрын
only a million, when did you last build one? ;)
@thedoeverything418
@thedoeverything418 3 жыл бұрын
thats what i love about the small ones!
@chrisclark3150
@chrisclark3150 2 жыл бұрын
I've watched so many of your videos, and I have to know, how long have you been seriously flying 3D? Must be at least ten years. And I'm sure you have spent a fair amount of time on a simulator? Amazing flying skills. Thanks for all the videos and your time!
@josemarambiorojas5974
@josemarambiorojas5974 Жыл бұрын
Hola de chile .tienes el plano de ese avion
@cooperbrown4510
@cooperbrown4510 2 жыл бұрын
How long does the 430mah battery last on a flight?
@FurlHawkens
@FurlHawkens 5 жыл бұрын
Amazing
@g.p.7880
@g.p.7880 11 ай бұрын
How to fly like you sir??
@easy_3d
@easy_3d 3 жыл бұрын
Any build plans or templates to make a diy 3d foamy?
@givdulsen
@givdulsen 9 ай бұрын
What crack yak is that lite or superlite?
@MartinPickering-PickeringRC
@MartinPickering-PickeringRC 9 ай бұрын
Yak Lite
@FPV-wi8fw
@FPV-wi8fw 5 жыл бұрын
Foamies are the best
@Kodwa2013
@Kodwa2013 3 жыл бұрын
I know i have the lazer
@maxmorgan2297
@maxmorgan2297 4 жыл бұрын
I have the old super zoom and veloxty from RCF and they really fly well and awesome 3D trainers . But have to try the Yak;).
@MartinPickering-PickeringRC
@MartinPickering-PickeringRC 4 жыл бұрын
Great models, all of them!
@maxmorgan2297
@maxmorgan2297 4 жыл бұрын
@@MartinPickering-PickeringRC , Ya, mine fly super duper:) For new pilots i would say start with the Zoom. It's "a little slow" but can do it all, and you have a better chance to save it or correkt ;)
@bigmikeyc83
@bigmikeyc83 3 жыл бұрын
He looks like Jason Statham with hair lol
@madeline-xy3pr
@madeline-xy3pr 5 жыл бұрын
Amazing perfect brooo...😎😎
@matthewgoing9162
@matthewgoing9162 5 жыл бұрын
come fly it in SA, i really want to meet you again.
@robertjanco
@robertjanco 2 жыл бұрын
what motor did you use?
@MartinPickering-PickeringRC
@MartinPickering-PickeringRC 2 жыл бұрын
The stock combo from RC-Factory
@marietee_fpv
@marietee_fpv 5 жыл бұрын
Martin en el bellota ya haremos cuentas jajajja
@3dbuilds19
@3dbuilds19 4 жыл бұрын
You should fly it in mall
Twisted Hobbys - Veloxity/Edge 540XL - Build & Maiden Flight
22:37
Twisted Hobbys Inc
Рет қаралды 11 М.
Pilot RC factory
22:59
Tony Pilor-RC
Рет қаралды 382 М.
How Much Tape To Stop A Lamborghini?
00:15
MrBeast
Рет қаралды 137 МЛН
When mom gets home, but you're in rollerblades.
00:40
Daniel LaBelle
Рет қаралды 145 МЛН
The IMPOSSIBLE Puzzle..
00:55
Stokes Twins
Рет қаралды 107 МЛН
Which team will win? Team Joy or Team Gumball?! 🤔
00:29
BigSchool
Рет қаралды 15 МЛН
Twisted Hobbys/RC Factory - 39" Crack Yak 55 - Build & Maiden Flight
16:46
Twisted Hobbys Inc
Рет қаралды 2,8 М.
THE ULTIMATE FOAMY SETUP!  with MKS Servos inside!!!
11:36
Martin Pickering
Рет қаралды 82 М.
RC FACTORY EDGE 540 mini RC airplane (strong windy day)
2:39
3D비행기 취미
Рет қаралды 920
Twisted Hobbys / RC Factory Crack Yak XL - Build Timelapse
9:47
BUILD & FLY: Twisted Hobbys Mini Crack Yak, Assembly & Review
10:05
Nelson Hobbies & RC
Рет қаралды 6 М.
TH Crack Yak XL fun
16:13
PropGear
Рет қаралды 518
RC-Factory, Crack Yak MINI - Tiny but so fun!!
8:21
Martin Pickering
Рет қаралды 13 М.
RCfactory 39'' EDGE 540 V3
5:42
Zain Wasif
Рет қаралды 26 М.
Twisted Hobbys/RC Factory - 39" Super Extra - Build & Maiden Flight
18:10
Twisted Hobbys Inc
Рет қаралды 3,5 М.
How Much Tape To Stop A Lamborghini?
00:15
MrBeast
Рет қаралды 137 МЛН