How To Remove / Install Front Bumper On A 2008-2014 Dodge Challenger

[@ajc5370]

It's funny I was just out of body shop where they told me how terribly impossible it is to take this front bumper off justifying the hours and hours of labor to simply have it repainted I'm glad I saw this thank you

[@goyat15]

Thank you for such a clear and detailed video. My girlfriend - with almost no mechanic skills - was also confident about doing it on her own. Awesome explanation!

[@jlomax215]

This video is so simple and easy to understand. I have a 2008 Dodge Challenger SRT8 and it went exactly how you said and honestly, it turned out to be a very simple task (changing the headlights). Thank you so much!!!

[@jerryhenson3916]

I hit a raccoon last week, and I'm thinking about changing my front bumper, as well. And the chin spoiler. Thank you so much for this!

[@Brwinka]

change it for the scat pack/hellcat bumper

[@jerryhenson3916]

@@Brwinka I thought about that, but I'm just gonna keep it as original as possible.

[@mja7882]

Well done! So many videos like these don’t take the time you did to show all the steps.

[@rudy1570]

thank you so much for the video. I have an exact year challenger and was afraid to mess it up. Thank you for step by step instructions.

[@mothwings8795]

Very useful and helpful! I'm realizing that the little patch job I want to do is going to be a bit hindered by lacking space and the wash plate underneath, so definitely not a Me in the Garage situation but I'm certain to reference your video in the future when I can get some space and a little help!

[@TwiztedVampire]

Thank you so much, someone hit my front bumper and I needed to replace the whole front so glad it ain't that difficult I guess😅

[@Jade10122]

Thank you so much for this. I was just quoted an insane price to remove my bumper and fix the clips on a trim piece. I will be able to fix the broken clips and a chipped/cracked Headlight, thanks to your video. ❤ 🚗 ====== 💨

[@JoeyCalhoun-qf2vr]

Great cameraman🤝

[@javiperez9091]

Hey thanks for showing the video removing the bumper I appreciate it.

[@jairoallday]

Thank you so much now is gonna be much easier to remove the bumper!

[@lifeandThings]

Hey! I love how this cut to the chase and made it seem easy. Now it is my turn to actually try it. Haha. 😎

[@MakoKong]

Amazing video. Thank you. Plan on removing mine to install grille lights

[@Iam_Moss]

That bolt inside the wheel well you make look so easy. I have no room to twist w my box wrench!

[@MartinsUsedCarsCollectiblesLLC]

I had to loosen it with a wrench (not a ratchet) and then used my hand to unscrew it. The fender is sharp and cut the back of my hand. It’s the hardest part of the bumper removal.

[@SPCE_BOYY]

@@MartinsUsedCarsCollectiblesLLC can you remove the fender without removing the bumper ?

[@MartinsUsedCarsCollectiblesLLC]

@@SPCE_BOYY I would remove the bumper and then the fender.

[@SPCE_BOYY]

@@MartinsUsedCarsCollectiblesLLC thank you

[@TxHammer757]

Thank you for this video........I have been thinking about pulling mine off.......now I see its not that big of a deal.....thanks again @Hammersrt

[@joserosas5420]

Thank you so much for sharing. Today I had a slight accident and need to remove the front bumper. This video will be very helpful.

[@t.g.5797]

U nake it look so Eaxy bro Just coasting the california highway! 😌✌🏾 Thks

[@Fitteds4dayz]

This was a big help!! Thank you sir

[@whitefbivanaroundthecorner4092]

A huge help! Thank you!

[@Ariel4life]

1:24 what are those screws called ? I need to buy some for my car

[@luismercado6709]

Awesome man thank you for the video.

[@paulfontanelli3415]

Man I wish I had watched this video first, I did a whole bunch of unnecessary shit! Thank you

[@b.jlovett]

Hey Martin,, in behind the bumper cover is there a steel reinforced bumper bar ,I really couldn't see it in the video.......The reason I ask is I have a 2020 Challenger SXT that has no fog lamps, but has the factory pre cut outs for fog lamps . I plan on installing a set of aftermarket fog lamps but I will need a place to install the fog lamp brackets in behind the cover to hold the fog lamp assembly in place........Great video , 😊 thanks.

[@MartinsUsedCarsCollectiblesLLC]

There is a steel bar behind the bumper. It usually has a removable molded hard foam cover.

[@richlewis8812]

Love your videos. I have a 2007 dodge charger srt8. Can you show a video on installing a front bumper cover? I am having a hard time reinstalling it. Thank you

[@gabriellagonzalez8496]

Hi what are those plastic pieces that you took off first when just starting

[@hermanirene2692]

Invaluable

[@SlowMotion0991]

So I see you didn’t opt to put the close-out panels back on, I assume got smattered with whatever damage that happened there. That’s what I’m facing is do I even worry about em, what do they do, where exactly did they even go. Can’t find anything online

[@ten4k964]

Do all 2012 SXT Challengers have the same bumper removal process? Ive seen other videos where they had to remove screws from underneath the car in order to remove the bumper...but i noticed Martin didn't do that. .

[@artikulatekollektor36]

Damn, I would’ve cleaned and detailed the inside before. I would’ve put it back together but that’s just me. Well at least I know how to remove the front bumper. Thanks.

[@rufuss4425]

What bolt/screw does the bottom flat part that faces the road part connect to the bumper with? I cannot remember

[@cris3138]

Is the 2015 bumper any different?

[@rodrigobiella1719]

Very good video🤙🏻

[@shadatv9172]

Its crazy how cars nowadays aren’t made out of much. Plastic.

[@xbeastmodx5786]

I need the part number for the nut right at the 3.00 min mark. Goes on the rod behind splash guard . I know it's 10mm but I need the actual thread size or part number tia

[@GluedBarstool]

Did you ever find it? Been a pain in the ass to find it on mine

[@marcrogers-wi6ij]

Do I have to take the bumber off to change the fender

[@MartinsUsedCarsCollectiblesLLC]

It is possible to replace the fender without taking off the bumper. But we prefer to take it off to ensure proper installation. See our video on how to remove the fender.

[@marcrogers-wi6ij]

@@MartinsUsedCarsCollectiblesLLC I took the fender off w out taking number off.. I'll let you know when I finish putting it on soon

[@JoseCruz-nq7gt]

Gracia por el video

[@keilandarbonne9614]

Great video!

[@HK-uq9by]

Thermal expansion/contraction of plastic is way higher than steel, it also deforms by time. The other issue is the paint. You can not use the same paint on that part of the car! I wonder what the designers were thinking!

[@evie9474]

Any idea where to buy a new front bumpers for a 2010 dodge challenger?

[@MartinsUsedCarsCollectiblesLLC]

Amazon has various front bumper covers.

[@AnthonyJohnson-vp1gw]

The 2 plastic pieces 1 under the lever, What's the name of those? Need to order some. Thanks

[@Russian_polite_man]

You mean the ones that are protecting cars underneath?

[@AnthonyJohnson-vp1gw]

@@Russian_polite_man found them thanks

[@tannergolden2670]

Where can I find all the hardware and plastic for a 2012 challenger front bumper?

[@yairelsotomayor461]

I'm in the same situation, I want to put an SRT bumper on it and I don't know if they are the same measurements

[@TheCrimsonChinJr]

Do you know what type of rivets/clips you got? And where did you find them at??

[@MartinsUsedCarsCollectiblesLLC]

They are bumper push pins. Here is a link to order them on Amazon $6! amzn.to/3Ag1gpH

[@brodyrichard263]

All the plastic body parts on my challenger are pretty loose even the grill and trim just kinds wiggles..pretty upset about it im assuming its normal becsuse even the newer ones just seem like the bumpers and grills just arent mounted/held on very solid

[@ten4k964]

My 2012 sxt does the same, the grill and the headlight trim are shakey asF

[@tonybotelho3395]

Any tips for that inner screw? Can’t seem to even find room to turn my wrench in there

[@MartinsUsedCarsCollectiblesLLC]

You may have to use an extension (or 2) on your ratchet. I did one turn on the nut and then it was loose enough to get off with my hand.

[@tonybotelho3395]

@@MartinsUsedCarsCollectiblesLLC I’ve tried the extension but the 10 mil doesn’t seem to grip it. I’ve got it lose enough where it turns but either way I turn it, it starts to tighten with my fingers

[@tonybotelho3395]

@@MartinsUsedCarsCollectiblesLLC literally got every thing else off except those 2. Took me 30 minutes for everything else and these are taking me several hours of trying

[@customsneakersaddiction6670]

This video makes it look so easy lol im about to take my front bumper off my 2010 challenger rt got to install the front. Bumber lip and a splitter..

[@javierescobar5689]

How did it go? Mines needing the same. Its a 2013 RT

[@customsneakersaddiction6670]

@@javierescobar5689 bro its real easy to be honest no need to take lights off ect..

[@javierescobar3570]

@@customsneakersaddiction6670 thank you, brother! Gonna get to work on it this coming weekend

[@brodyrichard263]

Good luck! My.bumber and grill all the plastic/fiber pieces on my body seem loose and wiggle..bums me out so bad idk if it needs new clips or what or maybe challengers sre just like that??

[@tesla_3_performance]

Doing my widebody scat now; don’t know that the sides will pop off that easy. I have front splitter plus the fender flares 😬😳

[@Jerry_autosprayzone]

Good lookin

[@danielsmith2447]

Nice tutorial, one note, I cringe every time I see someone using a screwdriver for a pry bar.

[@kevinmurray5733]

Bumper cover

[@chrisyangtze8403]

All that plastic looks nice but you have really No front end protection really Dodge what happened to the good old metal bumper 😳🙊🙈🙉😭🕳️🔥🤕🤕🤕🤕

[@yairelsotomayor461]

One question I have the challenger RT classic mopar 5.7v8 and I want to put the frunt bumper Srt on it.

[@Alanreyes-jm1pn]

Whats the question😂