Massive audio 6.5 summo fleximg on a 1000 watts. Read description

[@gtgodbear6320]

I'm very curious of the base feel of 6.5" subs. I built my x-wife and I the same 4 ohm system but she had 10's and I had 12's. The 10's hit tighter & harder & the 12's hit wider and louder. Her 10's was 1,100w and my 12s were 1,300w both on the same 1,000w 2 channel amp. There was a noticeable difference in base sound on 1,000w, same settings amp & EQ. I figured it would be about the same since they were both getting the same wattage and they both exceeded the maximum wattage of the amp.

[@gtgodbear6320]

Turn the EQ Bass all the way down. Turn the volume up to maximum level before high/mid distortion if any. Turn the bass up until it barely distorts and turn it back one. Then you can have a loud stereo with the max amount of Base. Most people just turn the bass up and then can't turn it up loud without it sounded like 💩 or completely unable to hear the highs and mids.

[@NerdyBassHead]

Wow they have very clean excursion

[@soundwavesaudio1]

NerdyBassHead 2004 yes they do

[@Ron-Webster]

holy shit for a 8" thats amazing!!!

[@mrvaj2021]

Ron Webster i think there 6.5 lol

[@WiKiTWoNKa]

They are 6.5"

[@Built_it_by-alex]

Funky music 😍 love the subs

[@redford6110]

sounds like a 2000s ringtone

[@lanajacknichols8397]

so the question is hook our subs up in phase in reality or make them out of phase so they look in phase in a youtube video ?? feel fRee to post your answers i'm asking for a friend of course

[@soundwavesaudio1]

I think ill hooked them up in phase.

[@krowwithakay]

Not even how it works... The reason it looks out of phase it rolling shutter (camera capturing the frames gradually in a wiping motion instead of all at once) this causes them to appear out of phase because to the camera the one on the left is playing the note before the one on the right, not 180 out of phase.

[@tomdrums4607]

Put them in phase! Would be way louder. They are cancelling each other out.

[@raulfernandez9111]

How do you put them in phase?

[@408SPLKINGS]

@@raulfernandez9111 wire them the same i.e. positive to positive & negative to negative.

[@lanajacknichols8397]

​@@408SPLKINGS where i live we call that parallel which drops your dvc 4ohm subs to 2ohm actually 1.8ohm on my meter and wired in the same fashion to my amp . or am i missing something in your instruction.?im real talk,notshit talk bro

[@DanielMartinez-gb4tb]

Good for 2 6'½ that the way it suppose test woofers with bass tracks!

[@ilovetoyotatrucks]

That's the banger #oldskoobaby shits thumpin like that #BASSmkNk

[@SuperChewy808]

Curious if you put them in phase or if they even lasted this long from someone cranking them up, wondering why the output sucks because they are fighting each other??

[@soundwavesaudio1]

They are in phase watch the vid at 2:30 to 3:00 its the camera angle

[@bassbrother101]

wow did they get warm or hot also for people in the comments they are in phase and read the discription also

[@soundwavesaudio1]

Not too hot they can actually take some punishment

[@THE1ANDONLYSTILLMIN]

I CANT TURN EM UP THAT LOUD LMFAOO WITH YO WALMART STERIO HAD IT ALL THE WAY UP STOP IT LOL

[@soundwavesaudio1]

Stillmin Stilldoit for your info the music was streaming via Bluetooth and the tablet volume was low and I control the bass with the bass control knob for Rockford amp look at my set up before talking shit

[@soundwavesaudio1]

Did you see it yet

[@puresesh7985]

you just got fucked mate.

[@health1st189]

😄

[@tedphillips1977]

Walmart music sounds no less Mang...chill on dude bc he was proud n sometimes we need that dude, life's a mf'R w dez angry Democrats around town...Rattle Nancy Pelosis teeth off her chin and into her lap Gin, the best daze are ahead homes! I liked it along with his 3 speakz per lower door panel, man must have passion for something cannot be denied us in our cage! Magnifico ...

[@waterlover]

What’s the dems on that box and on port?

[@3dPrintingMillennial]

can't turn it up that loud.... *proceeds to crank the dial up to 2 away from max volume* 🤦🏽.... nice flex though.

[@soundwavesaudio1]

Jericho Snaxxx for your info I was controlling the volume with the a tablet not that's what the radio was all the way up

[@soundwavesaudio1]

Jericho Snaxxx if you notice the volume goes up and comes down even though it's going up on the radio

[@MrCUEVAS30]

Alpine mrx-m240. The volume wasn’t up

[@laynettadeckard2507]

They will handle way more than 150 rms

[@leeinthesestreetz4626]

There not in phase

[@soundwavesaudio1]

Lee Inthesestreetz your out of phase !

[@MikeAnnunziato]

They're definitely out of phase you can see it you got one of them hooked up backwards homie how could you not hear it

[@soundwavesaudio1]

Deez Nuttz not out of phase I'm not an idiot. The box is small and ported that's why one has more resistance than the other. How can you not know about this phenomena homie

[@joneser30]

They are small displacement but if they run in the same air space I can see running out of phase , it really only matters with big systems with big displacement such as 15's you run your mids out of phase to keep from damaging them , some isobaric setups require this too but you are running a large box and unless you're port is only a inch around and 2 ft long I don't see much advantage running out of phase

[@juancardona9102]

Now thats how wooferz should flex bra😄

[@jdportwerks6795]

Why do you have to sync 2 subs?

[@408SPLKINGS]

So they they sound good & dont destroy each other.

[@aut0sync]

They're 70.00 each on Amazon. Who cares if they blow.

[@WiKiTWoNKa]

They are highly underrated

[@jamesfalvey77]

sweet !!!!!!

[@clintonswart6670]

"Can't turn it up all that loud" It already sounds like clipping, proceeds to - TURNS IT UP MORE- . Meanwhile, the little subs are out of phase making no audible sound except for the chaffing of air as they are pushed by the square wave generator (I mean Rockford amp)

[@soundwavesaudio1]

Another asshole that comments with no knowledge. Not out of phase. If they where out of phase you wouldn't be able to hear them at all just see them move this is some low notes the fact that you can even hear some of the bass out of 2 6.5 150 watt subs says something. 300 watts rated rms for the subs on a 1000 watt cea amp that the actual rms is 1400+ watts. Not even close to clipping. Yes they look out of phase because I'm not a professional videographer. And I used the camera on a phone not able to keep up with the movement of the subs. And I used a tablet for volume that's why the head unit is all the way up the tablet is not. Look at the video as the volume goes up on the unit the actual sound goes down.

[@Cambalamba]

Get a real amp lol

[@soundwavesaudio1]

@@Cambalamba almost 1,500 watts cea compliant. Dont really need more than that. I lile my vocals loud and the bass to reinforce the sound. The bass shouldn't drown the vocals. Its not an spl system. I just want loud clean music. 1500 watts on 6 10s does damn good. Plus another 1500 on the on on 18 mids and high. I dont know why i should lol.

[@betorojas2119]

What is the final song called?

[@soundwavesaudio1]

Reggae bass Techno bass crew

[@betorojas2119]

@@soundwavesaudio1 Thanks friend😉

[@WiKiTWoNKa]

They are out of phase 😭🤦🏽‍♂️💔

[@soundwavesaudio1]

They are not . Ive had this argument a few times is the camera , same as when woffers look like they are wobbling,or bending, is the camera

[@WiKiTWoNKa]

@@soundwavesaudio1 well you may be right but for my experience when I see one woofer flexing up as the other woofer is flexing down then they are out of phase but yet you probably don't have separate Chambers so maybe when one woofer is flexing out it's pulling the other woofer down slightly or something but usually that doesn't work that way if they're running parallel with each other which means they should be flexing in the same direction 🤷‍♂️

[@soundwavesaudio1]

@@WiKiTWoNKa put the video at 2 minutes 40 seconds. 2.40 that angle shows them moving together

[@trudeaumustgo1920]

Clearly very much in phase.

[@mattparks11]

Out of phase

[@soundwavesaudio1]

Matt Parks did you read all the comments before commenting. Not out of phase

[@mattparks11]

voceteo10 1 yes I’m gonna come watch a video and read every comment. I saw they were out of phase and clicked off. Didn’t wanna listen/take advice lol

[@soundwavesaudio1]

Let's see your set up. And see mine let's see who needs advice. I'm rocking 22 speakers in my truck. I'm sure I know how to wire a sub and if it was out of phase. You wouldn't hear it at all. Just see them moving. Been at this since I was 13. So yeaaahh

[@mattparks11]

voceteo10 1 I run 2 12 “ dd audio 800 series powered by a Memphis 1500.1 not no cheap little 70 dollar 6.5 subs and a Walmart head unit that I have to turn all the way up lol

[@soundwavesaudio1]

Matt Parks same argument everyone makes the unit is all the way up for 2 reasons my set up in properly tuned so I can get loud with no distortion and for this video I had a tablet via bluetooth. Look closely at the video the volume goes up on the radio but it actually lower if you listen because I'm turning it down on the tablet. And I bet I paid less for my 22 speakers 4 amps and daul battery not to mention 3 0awg runs I'm louder and cleaner than your expensive brand shit 4 years later and all my cea compliant setup still at it

[@hongbitter7142]

Speakers are out of phase!

[@soundwavesaudio1]

Tyler 616 no they're not!

[@jcMarcell]

It's the camera focusing on one driver and not the other equally so the drivers appears to be out of phase but it's because of the camera focusing on one and not the other so the one that's out of focus (not in the center of the camera view) seems to be out of phase (moving slower than) with the one that is within it's focus. If the drivers were out of phase in that enclosure we wouldn't hear bass because each driver would cancel out the other. His shit hooked up right

[@408SPLKINGS]

Idk why everybody is butt hurt. Cellphone camera makes it look out of phase. It sounds like 💩💩💩💩👎👎 tho. It sounds out of phase. Nice tremble demo video. What bass 🔊🔊 ?? Turn down your gain & turn up your volume. If your gonna post a demo be prepared for criticism. Good luck & enjoy what you do.

[@ThatsToughTV]

That punch. Is doing about 300 rms. Them subs could do about 400 maybe. That amp you have is working really hard to move them.

[@soundwavesaudio1]

How do you figure a 1,450 watt rms punch amplifier is doing 300 watts.

[@ThatsToughTV]

Because you say a 1000 amp Watts. Punch dose half of what they state that’s for sure. Maybe even less. You can get a skar RP1500 for a really good deal bro. And do way more then that amp.

[@soundwavesaudio1]

@@ThatsToughTV what are you smoking Do you even know anything about car audio Big d wiz , Steve meade. Hello please stop it. Skar audio is a great brand. But so is Rockford fosgate, Rockford fosgate amps are some of the best amp around top 5 in us amps. Cant speak for other brands in other countries. Yes a little pricey but worth every dime. 1400+ watts on the amp dyno. Underrated amp. Punch 1000 at $400 not a bad price

[@soundwavesaudio1]

@@ThatsToughTV I'm pushing six 10s at 1.3ohms with this amp and 300 watts will not push them. I'm getting at least 850watts real power with my setup.

[@ThatsToughTV]

What dose using other people’s name change the common knowledge. For we all share the same knowledge it’s just those who go out and look for it. I can learn 2+2 is 4 in school but also in many other places. Punch is about as back as Rockford or Lanzar even Auto teck

[@riyazshaikh2578]

Which song on starting of the video?

[@soundwavesaudio1]

Not sure cant find it on my playlist

[@vishnumohan6721]

Out of phase

[@soundwavesaudio1]

Check the new description for the vid