MASSIVE upgrade for my LS3 E36!

[@JimmyOakes]

Use code JIMMYO50 to get 50% off your first Factor box at bit.ly/3HtjmcT (bit.ly/3HtjmcT) !

[@Noxidsignorantia]

JIMMY OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!

[@tylerreed7385]

Soo how long till you get bored of just the super charger and go twin charged ? 🤷 All the best noises

[@t-dougz6050]

DRIFTING IT U SHOULDA WENT MAGNUSON WITH THE AC CHILLER TO KEEP THE CHARGER COOL AFTER RUNS THEY ARE RIGHT IN PA. THEY ARE THE LEADERS N CREATORS OF THAT SELF CHILLING WITH STOCK AC UNITS.

[@danielgmo09]

Naruto is real, start practicing your naruto. Keep spreading This.

[@Robertwells596]

Please put a thermal barrier between the supercharger and the valley cover. It lowers temps like crazy and helps a lot.

[@Ieatpeople2]

Jimmy needs to read this, dude is 100% correct

[@isaiahrivera1720]

Bump!

[@alexwade8040]

bump

[@jonashald6590]

Bump

[@christianmorris4390]

Bump.

[@StoneAquatics]

Spoon has been an amazing addition to the team I’m thankful for his work and passion ❤

[@chrisparker962]

Same ✌️

[@nelsonpereira2026]

no doubt

[@ななころび]

Oaks has the Dream Team. I see him doing better than LZ in Comps the near future if he keeps this trajectory

[@BayhillBruiser]

Same with Austin

[@avmortensen1991]

So talented

[@mikepadelford2585]

I could watch spoon play with metal all day long. Anyone else feel this way

[@SrFive77]

not even commenting because jimmy said to hype spoon up, genuinely spoon blows me away with his work more and more each video. insane skills and one of the greatest keys to the team yet

[@enriquecrivera]

As Puerto Rican I’m Super proud of Spoon!!! Rompiendo Papi!!!

[@tomc5982]

I hope you guys never stop doing what you do together because it’s the best car entertainment in the world!

[@kvaughn1573]

Seriously!

[@addy660]

Austin doing that little air horn edit is class!! 😂😂

[@JoshBolin4]

I see Spoon is a fellow safety slide enjoyer

[@excitingstuff8209]

Comfort only

[@Madvizion]

It's Spoon, give the name respect.

[@JoshBolin4]

@@Madvizion good call

[@Mike_Westervelt]

Upgrade that intercooler brick if you plan on swapping the pulley.

[@kiltedsaint]

He should have went with the zl1 lid and brick. The cts-v guys go to the zl1 lid.

[@ScottO84]

​@@kiltedsaintDespite what he says in the video, that is the ZL1 lid. The CTS-V lid is flatter with rear inlets.

[@kiltedsaint]

@ScottO84 I gathered that after I saw the lid. Commented too fast and didn't edit it. I just finished up a lid/brick in an lsa swapped g body.

[@NONo443]

Spoon knocked it out of the park again on this exhaust build.

[@andymarshall4014]

As a fella lsa “tuner shop” do an 5” intake for that. Lsa loves lots of air to help the higher rpm’s breathe

[@johny79action]

Your tire budget is about to triple, the E36 is gonna boom :).

[@lowerd1]

Loving the LSA and with it sticking out a little, it’s gonna have a little ZR1 vibe.

[@flompa7245]

would love to see a shaker scoop 😂

[@GRIM.2002]

@@flompa7245that’s hemis thing tho

[@philldeath8619]

Reinforce the cooling brick in the lid… look into them collapsing if not from factory when boost is increased… I have ZL1 LSA

[@Slappyracecars]

The E36 just keeps getting better and better! Spoon hold your head high because you do great work.

[@TheNudnikNation]

Thank you so much Spoon for modifying that y-pipe to eliminate the restriction! I was mumbling at my screen when y'all first showed it. I'm so glad you put in the effort to make it right.

[@AtiFanBoy5770]

Coming form a 5th gen zl1 guy (LSA car) this is awesome But that lid is a ZL1 kid not a CTSV lid the ctsv is the lower one and the ctsv guys swap the zl1 lid in to make more power

[@colbybryant4880]

I need a Spoon X Johan collab ASAP!!Jimmy and LZ give them a project sheeeeeesssshhhh

[@brittonbrumitt]

Reinforce the intercooler brick if you're changing pullies... extra boost will collapse the end tanks on the brick.

[@x510YaDaDaMeAn]

Before you run that lsa blower, make sure you Weld and Reinforce the Brick.

[@theyumefactory]

2nd that!

[@kelvinturner2747]

I think Spoon has earned a welding table

[@riddlemethis01]

Damn I gotta say I love watching spoon's fabrication skills in action. His skills are a great addition to any build.

[@ianhirst9993]

Spoon is killing it jim. Hrs so good.👍👍

[@mikellewis2346]

I think the black supercharger top poking out the hood will look slick.

[@snowxll]

catching up on all the videos ive missed over the last few months and i can confidently say spoon is one of if not the best addition to the team so far, his craftmanship is beautiful and you can really see how talented he is even during the timelapse of welding it all up his welds are still smooth as butter. hes gifted

[@andremanley7710]

I’m calling it now, this thing is gonna make 750 on E85

[@yabaigarage]

You should look into getting one of the clear covers from a vette/camaro hood to graft in, that would look gangster and OEM+

[@jordaanludwig6459]

Boi I’m on nightshift in Australia and I’m waiting each night for new videos, love it

[@ShaneYahn]

Spoon literally turned your shop into a real race shop! I love how down to earth an grounded you all are. Just the boys doing big kid shit. I live through you all! ❤❤❤ thank you for being you!

[@Dice_weiss]

Gotta appreciate the attention to detail that Spoon brings to the table. Makes a huge difference in the quality of the builds

[@fitton15]

15:30 wake up from a nap new jimmy video 🙏 love from the Isle of wight England Boys ❤

[@johnpotter4062]

The intakes would look amazing powder coated the same color as the fan !

[@olumayoor]

Spoon!!!! Freaking beautiful work!!!

[@jay8486]

Spoon is Van Gogh with the welder!!! Straight Masterpiece!!! Can’t wait to hear this this jam!!!!!!!!

[@michaelele1257]

Man the way you can see that spoon is enjoying himself is awesome. Especially when he was like “can I port it?” Lol love it. Spoon your work speaks for itself

[@Sherlockveteran]

We all know Brian's build is sick and not comparable to this. But it's taken Brian forever to get to where it is with all the engine failures and what have you, and here's jimmy with that youtube money and a spoon. Just knocking all it out in a couple weeks.

[@sicknessuntamed]

Jimmy!!!!! make sure you get that blower ported, and use the aftermarket heat insulator for the bottom of the intake, it will breathe alot better.

[@theyumefactory]

MAKE SURE YOU REINFORCE THE IC BRICK!!!!!

[@mattmartin7820]

The vibes of every video are always so good, s/o everyone who’s also watching this on their lunch break!

[@JoelGonzalez-lk9rz]

That’s the Zl1 lid jimmy 🫣 Throw a smaller pulley and bigger balancer pulley. 💪🏽

[@BigBlockCaprice]

never thought you would go LSA supercharger. Definitely didnt expect it. im so excited for this

[@sukiontop]

I expected supercharger bc of the headers

[@PGBRR]

Jimmy said a few videos ago that it wasn't staying n/a but I was expecting a procharger

[@BigBlockCaprice]

@@PGBRR a pro charger is a brand of supercharger by the way.

[@PGBRR]

@@BigBlockCaprice I realize that bro, but I mean, I was expecting him to use a centrifugal supercharger

[@sukiontop]

@@PGBRR it's my nigga bigcockcaprice wym he's never wrong

[@higherthoughts7443]

Love the team, family, crew vibes now. Keep up the awesome work Austin.

[@AlaskaTony]

LSA!!!! can't wait to hear this start, Spoon killed the exhaust as he always does

[@cullenwheaton7858]

Seeing spoon weld up all these exhausts, intercooler piping setups, and the tube front makes me hyped and inspired to learn more fab work and do it on my own car. Y’all are killing it and hyped for where y’all are headed 🤙🏽

[@alexmilioris7641]

For some reason i love the intro lately especially the part that jimmy says the goodnight or whatever time is when you are watching . I'm from greece and it's always night by the time the video is uploaded and when i get to it , thanks for the best content since spoon got in with the team.

[@PennywiseM3]

Can't wait to hear that monster exhaust! Spoon killed it!

[@bizwup6897]

Spoon you're killing it. For real man keep it up! You're obviously incredibly important to Jimmy and to us as well! You've brought a lot to the channel.

[@zimble]

Unbelievable work by Spoon. All you guys too, great team ❤

[@sybes_420liljoe7]

Hoped you guys went for a big blower setup😢 was what i was typing. But hell fucking yeah man!! Blower action on the oakes channel. Love itttttt

[@Bobsta416]

Jimmy, you should do the weld a plate to the back of the brick mod in the supercharger lid, if you plan on running more than 20psi it will crush the backside of the brick restricting water flow

[@turb02aztC]

Spoon really does inspire me to get a welder and start mastering that craft once my garage space increases. He's always killing the fabrication.

[@Weesep]

Crazy you’re not going dry sump

[@rickymoore3944]

Just wrapping up my exhaust setup on my 924 project, no flexi at all in stock form...fixing to lift stainless section out and get a welded stainless flexi put in upon the advice of our good tech Spoon, liking the corrugated flexi over the mesh ones we seem to get more of over here in ireland, thank again for the guidance and entertainment guys..😎😎

[@stephenwhite6]

Reinforce that intercooler brick before it collapses on itself. It’s a common issue with them. Keep killing it!!

[@christopher5110]

Spoon has been such a great addition. You’re appreciated dude and your work/talent is seen!

[@dapperdanbuilds]

Spoon is a freaking artist! This thing is gonna be CRAZY!!!

[@arjenterpstra8252]

Great job spoon. And Jimmy get the man a propper welding table so Spoon can flex even better with his building mind and make more car Art

[@JB-Mk1TDI]

11:40 Engine build is perfect will have power and not being hard on it making the reliability on point !! proving how “point of diminishing return” works .

[@brockhyde7347]

Nice work! Nor sure if you just mixed up the lids on camera but the black lid you have is the ZL1 lid the ctsv lid has a lower profile.

[@ScottO84]

Yep, he just got them backwards. He has the better of the two lid setups.

[@bryanhinson987]

Yo spoon brother you are a beast 💪 them welds a mint 👌 and can't wait to see you whipping your our masterpiece around with the boys and still to this day this is my favorite channel so to date 📅 but yall all keep up the great work and let's gets this channel to a million subscribers by the end of the year

[@jasonlouis5498]

Spoon killed it once again! I love watching this dude weld things together. LSA e36 FTW!!!

[@calleverops]

Spoon is literally a magician dudes god sent, god and jimmy bless that man !

[@PURPOS3BU1LT]

Dual 3 to single 4 sounds soo good on my wife’s l76 6.0 with a big cam and long tubes. Love single exhaust sound on these motors

[@jasonleovan4611]

Hell yeah excited for you Jimmy Lsa 6.2 and spoon knocked that sucker right out the park

[@jimbob2013]

Jimmys car collection is actually pretty insane

[@nateturnquist9049]

ATI Damper, dual 660 springs, and ARP headstuds. With those and E85 you’ll have no issues

[@lahnie95]

Love how you have the supercharger sitting on the table in the background of the thumbnail. Sneaky sneaky

[@Peteblz1]

I was so worried you were going to go nitrous. And i just had a feeling that would be too finicky and not work correctly. So cool you are going supercharger. Instant power. Lots if torque. Good thing about ls is so many people use them you can ask alot of questions and get good information from friends. Love the content. Highly undersubbed channel. The quality of the videos yall do are worthy of million sub mark for sure. Keep up the good work and hopefully youtube will push the content like they used to back in the day.

[@danielshaw9465]

Y'all are so lucky to have one another. Love what you're creating, good vibes and sick rides 🤙 Got giddy when u pulled out the supercharger 🥲

[@coltengottschalk1049]

Make sure you run a good pump and big expansion tank in the trunk. If you’re drifting and hot lapping you need ice to keep the iat down. I have an lsa on my V1 so ask me how I know😂 Hope you’re prepared for the instant torque this thing will produce!

[@sberry80]

The motion raceworks 105mm throttle body works amazing with the lsa supercharger

[@Nick_Tank]

SPOON HAS A BUMPER NOW!!!!!! Yay for the community❤❤❤

[@jamesharkema74]

Spoon has always been a good fabricator,but is getting soooo good

[@ashleyholmes5804]

Haha, i see the charger on the bench in the thumb nail. Top work from spoon. He does good work. Loving the constant content and more and more awesome builds.

[@AbreuCustoms]

im currently building a stock lq4 6.0 and just studding it and turboing it and putting it in my e90. i seriously cant wait. im so happy to see a ls going into the e36!!!

[@dylantavcar4869]

jimmy please do not let this build down with yucky oem ls rocker covers, that blower and the rails need a compliment ! also great work on exhaust spoon ya killing it dude, keen to see the rest of this build !

[@goodnaruk]

Exhaust gas velocity is more important than diameter, often times a 3" choke can actually help speed things along and improve performance over an oversized exhaust with slower velocity.

[@HolyHandJesus]

get a big roll of construction paper to wrap polished metal instead of using a whole roll of tape to cover it. Quick to apply and remove plus saves money.

[@r3drocket659]

Shit looks killer! I remember back when you put a car together and had to sit around and wait for someone to make you an exhaust and paint n shit. Spoon is a vital key component to the shop, the builds are just getting better and better!

[@shannacollins4741]

Ive been patiently waiting for a new Jimmy O upload and after this one ill be looking for DJ to post but always a great day when the guys get together !

[@grantsummers2571]

Every1 needs a spoon! Amazing work from the team!

[@TimFrostExclusive]

👏🏾👏🏾👏🏾👏🏾👏🏾 spoon killed it!!

[@dalenewcomb5192]

I am so proud you went with the supercharger! I am so glad you changed it up and didn’t go with the turbo. Can wait to see the BMW running!

[@devynfordrums]

We need a spoon shirt that a percentage of proceeds goes to that drift build!!! Spoon is the man!!

[@YotaguyJosh]

I see you Austin, that drivetrain would be perfect for a blue gto. 😝

[@mumpfbacke]

Ive got a video idea for you guys: a reaction or a recap pf the Nürburgring trip. Get the whole squad togher an watch the videos. This is one of my favorite series

[@brettlewis6080]

Loving the new rendition of the e36. We need Spoon merch

[@CJdriftZ]

Dayum that exhaust is siiick! Looking forward to seeing this shred!!!

[@campervanbug7658]

They have reinforced intercoolers, thoes are known to implode

[@vestlife4788]

Cowl hood would be dope and clean

[@RafaTheBeast]

Soooooooooo what about if you try to fit a E90 M3 hood bump???? 🤔🤔🤔🤔

[@mikeg8773]

I've been waiting for this FOR YEARS 😂 this is crazy nice! 4" is wild! Can't wait to hear it.

[@kasper_429]

I can't wait to hear what this beast is gonna sound like! Idk which I'm gonna like better, the supercharger whine, or the note from that massive exhaust. Seeing the black top cover peeking out of the hood is gonna be sick as well!

[@Jinx-dv7ne]

finally someone doing what ive been saying for years.. told taylor ray the same SUPER CHARGE DRIFT CARRRSSSSS thoi would 100% dry sump it seems to be the go to for ls

[@mako-daddy]

the lid you got is a zL1 lid....the ctsv lid the water ports are on the back

[@hectorsuarez853HOLLYWOODHECK]

Looks absolutely killer... Spoon is the man.

[@unseasoned223]

A1 AF always rep Oakes Garage

[@GL-oo9kc]

A full day in the life of Spoon video please, I'd love to see how he works, very talented.

[@clarenceperkins3115]

Freaking love spoon! definitely an awesome addition to the team!