Master Using Standard Scraper On Inside of Bowl

Had to redo this video but I'm glad I did as I think second time I explain a bit better... Using Standard Scraper are not difficult, yes they do carry different tehniques and some safety issues but if you follow few simple rules ,you should be able to use standard scraper without nasty catches.
Hope this video will help out .
Enjoy
_________________________________________________
Harvey Europe
www.harveywood...
Harvey USA
harveymachiner...
Harvey Turbo T-40 Europe
www.harveywood...
KLINGSPOR CROATIA - www.klingspor.hr/
CLOTH BACK SANDPAPER - www.klingspor....
PAPERBACK SANDPAPER - www.klingspor....
SANDING PAD - www.klingspor....
SCOTCHBRIDE PAD - www.klingspor....
150mm SANDING DISCS - www.klingspor....
_________________________________________________
CRAFT SUPPLY USA WEBSITE
woodturnerscat...
VICMARK VM120 CHUCK
woodturnerscat...
MOFFATT WORK LAMP
woodturnerscat...
_________________________________________________
MY LATHE
drechslershop....
STEINERT WEBSITE
drechslershop....
AFFILIATE LINKS.
NEUREITER and WOODCUT tools I use :
M42 BOWL GOUGES - neureiter.idev...
SCRAPERS - neureiter.idev...
CRYOGENIC BOWL GOUGES - neureiter.idev...
WOODCUT PRO CUTTER - neureiter.idev...
WOODCUT PRO ADVANCE - neureiter.idev...
IRONS SHEAR SCRAPER - neureiter.idev...
WOODCUT BOWL SAVER - neureiter.idev...
________________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz...
Spindle gouge -www.gurtool.cz...
Calipers - www.gurtool.cz...
Sanding pads - www.gurtool.cz...
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr...
BENCH GRINDER
www.tobi.si/hr...
DIAMOND FILE
www.tobi.si/hr...
________________________________________________
disclaimer Methods that are shown works great for me and they are not only methods out there, if you find this or any other method not comfortble,please use some other way.
Thank you and enjoy

[@MikeM-sc4tx]

Thank you Tomislav for confirming that going slow with a scraper is better than fast with a gouge. Your the best teacher i watch!

[@tomislavtomasicwoodturning]

Thank you, most of the time,if you slow down feeding rate either with gouge or scraper you will get slighty better surface

[@boooshes]

This video has to be your very best as an instructional video. The camera angles, the sound, your thorough explanations were all excellent. Well done.

[@tomislavtomasicwoodturning]

Thanks, really appriciate that and glad to hear ☺️

[@northernhumidor5615]

To all the new turners watching, this is excellent teaching of solid bowl turning technique. Well done sir. Always a joy to watch

[@tomislavtomasicwoodturning]

Thank you very much sir

[@tonyturnswood]

Great tip on the "death grip" ... I need to learn to relax my guide hand with the bowl gouge for sure... great video, Tomislav with amazing tips for all levels of turners! - Thank you! (and glad the noise from the bearings is gone!)

[@tomislavtomasicwoodturning]

Thank you Tony for watching, glad to help out ☺️

[@davebenedum9253]

Thank you for the "over the tool" view. It really helped to see what part of the gouge was doing the work. Thank you for taking the time to explain "less than 90 degrees". I appreciate your patience and detailed explanations.

[@tomislavtomasicwoodturning]

Thank you very much for watching 😀

[@STMwoodturning]

I adopted your practice a few months ago and the bottoms of my bowls have never been better!

[@tomislavtomasicwoodturning]

Really glad to hear that ☺️

[@jimgill1105]

Tomaslav you've excelled here - a inspirational instructional video. It has cleared up a lot of the faults that happen from time to time.

[@tomislavtomasicwoodturning]

Thank you very much

[@MarklTucson]

Excellent video Tomislav. That was very helpful. The detail you provided made everything very clear. That bit about very light touch is a critical piece of information for anyone starting to turn. That avoids so many problems.

[@tomislavtomasicwoodturning]

That is true, so many that came to me were too rough with turning.... Its almost like operation, slow and metodical Thank you soo much for watching

[@luvwud]

Another video to add to the excellent list of in depth educational videos Tomislav. Cheers Geoff

[@tomislavtomasicwoodturning]

Thank you Geoff

[@brianjoneswoodturning3682]

Well done, thats blown a few myths out of the picture! Nice to see a craftsman at work thsnks for sharing ;-)

[@tomislavtomasicwoodturning]

Thank you Soo much sir

[@cobberpete1]

Thank you again for the Excellent Tuition.

[@DougMilleratWoodSpunRound]

Excellent instruction while producing a lovely bowl. Well done my friend.

[@tomislavtomasicwoodturning]

Thank you Doug, I really appriciate that

[@edwardukleja4583]

Another brilliant lesson. Thank you.

[@claudepotter7763]

Thanks again for another great vidio learning alot from you. I realy enjoy your teaching

[@peltona]

I'm glad that lathe is working properly now. Also great to hear about Harvey's customer service.

[@randyrockwell6136]

Thank you for this very informative video. You have a real talent for breaking a technique down and explaining it in a way that is very easy for people at all levels to understand. Hope you are getting all the details worked out on your signature line of tools. I also hope that they will be available to the US market 🤠🇨🇱

[@tomislavtomasicwoodturning]

Thank you Randy, they will be available to order from me and I'll ship them pretty much everywhere within reason😄

[@jean-philippepellan5249]

I am no expert by any means but a small tip I learned the hard way with scraper is to take into consideration how agressive the burr/edge is on the scrapper. I was having a lot of bad catches even when the scrapper was below 90deg only to noticed I had rolled the burr so much it was lumberjack hook and would dig into the wood 😅. Still fogging my shield a little when approaching a scapper to the surface for the first time on a project.

[@tomislavtomasicwoodturning]

That is true and that is why I suggest when someone is starting out to use the burr straight from grinder, its much less grabby

[@jorisdemoel3821]

Beautiful work and very clearly explained. Many thanks!

[@tomislavtomasicwoodturning]

Thank you very much

[@Joe-wi1yj]

This is a great teaching video, thank you so much and keep up the great work

[@tomislavtomasicwoodturning]

Thank You soo much

[@DavidBird-uu8km]

Thanks for another great information video.

[@Salmo1960]

Fantastic video, very instructional. Thank you

[@William_Kenny]

Very enjoyable video tomislav Will👍🙂

[@rhysbailey2070]

Good instructional video

[@robindahlstrom5650]

Thank you, very good instructional video.

[@oldcharlie5533]

Thank you..your videos on scrapers has helped me very much.

[@Winterbourne_wood_turning]

I don’t suffer with the death grip but when I am doing turning that requires delicate touch I stop breathing……😅 Another good video Tomislav, thank you.

[@tomislavtomasicwoodturning]

We have all been there, thank you for watching

[@balahmay]

Your comments on cherry are of interest to me as that is what I mostly have in the form of prepared blanks to practice on. My current projects are 18” crotch figure bowls and the cores that came out of them. Your teachings were very helpful on getting good results with these. Especially the teachings on burr formation.

[@tomislavtomasicwoodturning]

Really appriciate that and glad to hear that my videos help out ☺️

[@billrockefeller5409]

Thanks for getting to the details of using the scrapers, I am now much more comfortable using them!

[@tomislavtomasicwoodturning]

Awsome,glad to hear that ☺️

[@jayscott306]

I can't say that scraping causes me problems, but your instructed so much more theory I think it will be even smoother for me. So many instructors tell you what and how. The why is what allows you to apply the knowledge in any circumstance. Thank you for the theory. Scraping a bit above center was new to me. I'm looking forward to the scraping of the yellow heart, in my chuck and ready to go, tomorrow.

[@tomislavtomasicwoodturning]

Thanks Jason, glad to help out,I need to find more free time to watch the rest of the Michael video, my days just don't have enough hours 😄

[@HRConsultant_Jeff]

I just finished a olive bowl this afternoon and I used my scraper for the bottom and it worked great, but I wish I had seen your video first. I had a lot of the technique right, but you always show me some new things which would have made it easier.

[@tomislavtomasicwoodturning]

Thank you, olive is great wood to work with,glad to help out

[@908woodturner]

Great learning video, thank you

[@DoctorSIS]

Excellent video, very useful for every level woodturners! Thank you!!

[@tomislavtomasicwoodturning]

Thank you for watching 🤗

[@georgepostins812]

Very well done

[@user-bighughie]

Fabulous video Tomislav. I really like using my scraper so you've taught me a lot in this tutorial. Thanks 😊

[@tomislavtomasicwoodturning]

Awsome to hear that ☺️

[@mootnmike]

BRILLIANT as always, thanks.

[@tomislavtomasicwoodturning]

Thank you very much 😀

[@RobertSchoenert]

most excellent video

[@turningwiththewoods]

Super instructive tomislav. Thanks for doing these great videos.

[@tomislavtomasicwoodturning]

Thank You for watching

[@stevenhansen8641]

🕶outstanding video Tomislav. Fantastic camera angles and sound is good. Thanks for the time and effort.

[@tomislavtomasicwoodturning]

Thank you Steven,Really means a lot to me

[@billstoffle7383]

Great job love the way u explain the reasoning behind the use of the tools

[@tomislavtomasicwoodturning]

Thank you very much

[@richardcarlson5189]

Great job teaching us. May God bless

[@epmdoorn]

And again a very interesting video, thanks very much Tomislav, I also are interested in an update about your scraper, thanks

[@tomislavtomasicwoodturning]

Thank you very much, I have sorted yesterday bussiness side of things,which took longer then expected as I can't make it faster unfourtually,but now in matter of days I should have everything up and running.... I'll announs it very soon,thank you very much for your interest

[@jimgardner5410]

Another excellent video Tomi, thank you. I have also heard Richard talk about a very delicate touch. Is there any chance you and Richard will get together one day for a video? That would be the all time best thing on KZbin. Also, can I make a request? I have seen various people talk about how they price their work. Often going on a size of the bowl calculation. I can't see how this works as, for example, a live edge burr with a wide rim and some beads etc. may take many times longer to make than a plain bowl of the same size from a piece of free cutting plain wood. Does the wood itself make a difference to final price? A piece of spalted Plum usually being more desirable than, say, a plain piece of Sapele. A video on that subject would be very interesting.

[@tomislavtomasicwoodturning]

Hello Jim This is the link to my pricing opinion kzbin.info/www/bejne/bXjanKFpmJaJbsksi=6bs13E-xdNdp5XxK Hope it helps I would like to make a video with Richard, maybe one day I get to visit or if he visits me.... Hopefully one day 😀

[@jimgardner5410]

@@tomislavtomasicwoodturning Thank you. I just watched it and now feel slightly humbled (in a good way). Very helpful.

[@timgooding25]

Thank you Tomislav for your clear explanation of how to use a scraper. Where can I purchase one of these? I live in Romania.

[@tomislavtomasicwoodturning]

I belive Neureiter will ship to Romania

[@craigraper2911]

Did I hear you say you was using a spindle gouge? And no I am not complaining glad to seeing am not the only one

[@tomislavtomasicwoodturning]

Yes, You sir are not alone😄

[@Fieldlark]

are you making your own scrapers? If so, what kind of steel? Excellent video. You are a good teacher.

[@tomislavtomasicwoodturning]

Thank you very much,Crown will make them for me, its m2 cryogenic

[@stephenmcfadyen1385]

Pozdrav Tomislav, Kaki Si. A beautiful little bowl and a great tutorial, when you get around to selling your refiner will it come with the little nick you grind on it on the left edge?

[@tomislavtomasicwoodturning]

Thank you very much Those who will want to order will be able to choose either factory edge, sharpen with grinder burr, or pulled burr with burnisher. And also if someone wants the nick for getting into corners

[@larrypack1]

Another great video Tomislav. I'm curious about what angle is on your scrapers. I started out at 15 degrees and then 20 but it looks like yours are steeper than that and they work well. Of course that may be because you are a much more experienced turner than me. Thanks, Larry

[@tomislavtomasicwoodturning]

Thank you Larry, just now I have posted a video on this topic that might help...

[@larrypack1]

@@tomislavtomasicwoodturning Thanks Tomislav. I actually found that video before I read your reply and wondered if it was a response to my question. Much appreciated!

[@joncooke2450]

Excellent tutorial Tomislav, thank you 👍 Quick question, which model of drill do you use? I'm looking to get a right angle drill for sanding 😉

[@tomislavtomasicwoodturning]

Thank you sir I believe Makita only makes two models now, with cord like I use, I have one with fast change head

[@barneyrubble5633]

Very nice bowl and finish. Any update on the refiner/burnisher availability?

[@tomislavtomasicwoodturning]

Thank you very much, I have sorted yesterday bussiness side of things,which took longer then expected as I can't make it faster unfourtually,but now in matter of days I should have everything up and running.... I'll announs it very soon

[@Pabloos8634]

Magnifique 👍

[@oleksiypokotylo7323]

Thanks for the video Tomislav! Do you think regulare scraper is much eficiant than negative rake one? Why don't you use negative rake scrapers?

[@tomislavtomasicwoodturning]

Yes, for me they are more efficient as I don't have to sharpen them nearly as often , to me I just don't see the need for negative rake scraper.... I have only one, Steve Jones grind and I use it only to round square smaller stuff. But that doesn't mean they don't work,they are just another way of smoothing the surface and we all prefere something different.☺️

[@orgcoast5990]

Can all of these roughing operations be done with a scraper? I have a terrible time with gouges---BIG catches.

[@tomislavtomasicwoodturning]

It can but there should be a reason for your cathes, there should't be catches, try watching some of my videos from TEHNIQUES playlist, perhaps it will point out where you make mistakes with gouges

[@haraldmayer8113]

Thank you for your instructions! Well done and very informational! What is the size of your scraper? It looks a bit thicker than 6mm, which i use. To prevent this rougher grain at 40:00 i change the direction while sandiing in the lower grit.

[@tomislavtomasicwoodturning]

Ofcourse, I would turn forward and reverse a few times during sanding, especially if there is a raised grain like im this case. This is what I call bowl scraper,ita 25x10mm, 1inch wide by 3/8 thick

[@haraldmayer8113]

@@tomislavtomasicwoodturning thank you!

[@randyrockwell6136]

One of, if not the best instructional video I’ve seen! You have a great ability to break a process down and explain all aspects. I have just purchased my first scraper to use on small boxes and definitely feel much more informed when I go to use it. I hope you get everything worked out with production of your own tools and that they will be available to the US market 🤠🇨🇱

[@alandisomma-od5fz]

Will this technique work with end grain turning?

[@tomislavtomasicwoodturning]

Yes it will

[@alandisomma-od5fz]

Thank you.

[@guymueller8614]

The scraper with the notch where did you get it?

[@tomislavtomasicwoodturning]

Its my signature REFINER scraper, very soon available to buy from me

[@Danielfrelliaro.]

Pregunta tomislav es a 45 grados o mas el filo de raspador Por que no anote la ves que hiciste el video de afilado y ayer no lo pude encontar

[@tomislavtomasicwoodturning]

The scraper in this video is a bit more then 45, roughly 50-55 at the nose

[@Danielfrelliaro.]

Gracias tomislav

[@jrk1666]

"Olá pra todos" Is 'Hello everyone' in Portuguese

[@tomislavtomasicwoodturning]

Awsome, thanks 😄

[@zenletter]

Your new lathe sure is loud. Lot of background noise. Thanks for your videos though.

[@maltshop62]

Thank you for making the video's very informative