Mastering Framing: Roof Sheathing & Fall Protection Tips!

[@Quietvibes07]

As a carpenter with 20 years of building homes & years of consuming building content, you, Tim, have by far the best videos out of everyone. I don’t know if it’s just because you keep it real and don’t try to bull 💩 your way through things & make yourself look like the best framer to ever live or if it’s the subtle humor that you lace into your videos, but whatever it is know that it’s appreciated.

[@AwesomeFramers]

@@Quietvibes07 wait for 2 weeks....I was editing a video today that is the opposite of Awesome 🤣🤣🤣 it was all bad and I'm showing it ALL

[@Quietvibes07]

@ Lol 😆 can’t wait!

[@CoryDrummond-c6v]

The most hilarious man on KZbin. The audio is always crystal clear

[@CoryDrummond-c6v]

Almost translucent 🤷‍♂️

[@h2s-i9o]

It takes 1000 unsafe acts before a mishap happens statistically. Youre right our life is a blessing and gift for us and those around us. If you are willing to protect yours why would you protect others. You're content is always a blessing to me

[@johnhaller5851]

Dying isn't necessarily the worst thing that can happen. Being stuck in a body that doesn't work is another possible outcome. Which outcome is worse is a value judgement on your part.

[@soccovitch]

Hey...don't beat yourself up on the video end of things. You have to be top 5 percent of all the channels I watch. Audio is top notch also! Keep at it man. Great buildings and great vids!

[@missulu]

As a builder who has fallen or been hurt at least once every time I get up in the air, use the fall protection!lol! Great video!

[@bghidinelli]

Thanks for showing the fall protection setup and explaining the details! I'm about to undertake re-roofing a 13/12 barn roof as a first timer and this points in the direction of how to stay alive.

[@BirchwoodBill]

Thanks!

[@AwesomeFramers]

Thanks bro!!

[@vbordeleau2011]

Great video, as always. Having fun every time. please don't burn yourself out whit that multi-tasking of yours. Stay up don't fall Timmy!

[@koppecreative]

I used to wear steel toes, but since recently i'm doing mostly finish work I've been wearing Etnies Marana skate shoes all day everyday. Would be interested to try the keens out with a carbon toe though. I do bounce back to framing sites to help out when the finish work is slow. Not on topic for shoes, but my favorite workwear is the Blaklader ripstop pants with the integrated pockets. I only have to put on my bags when I'm doing framing and even then only when it's more than making sure i have sufficient blocking for cabinets/handrails/towel bars etc. The gusseted crotch is really nice XD I'd be interested to see what your finish crew looks like as a fellow PNW builder =) Hope to see you at IBS in Feb!

[@PetetheCarpenter]

I find Helly Hansen to be a good lightweight shoe that is great on the roof. Your channel is awesome and I've learned a lot from it over the years that has helped me solo frame 25+ houses. If you need an idea for a video, an in depth tutorial on a construction calculator would be a good one. Keep up the great work!

[@zephyr1408]

It’s Saturday! I am stacked ; I hv cabinetry and shelving to make in order to catch the next job ? And Tim throws a video at me knowing I will grab a cup and watch ? Killing me on Saturday Tim ? Great video !

[@daviddorge1559]

Tim. Love these videos. I currently wear the keen csa sparta up here in Canada, great grip on ice and snow. Absolutely love them. My idea for a video would be some kind of sit down Q and A type format, either live on youtube or have us submit youtube or Instagram questions, have your brother join in with you, or your dad or your wife is she feels comfortable, and let us know how Timothy ticks .And like I commentated in your last video, we love any length of video you put out. Cheers eh

[@JBLewis]

My favorite work shoes are Keens! They just fit my feet so well. I'm not sure about episode ideas, but I've certainly much more aware of how I'd like my dream house to be built!

[@lorenrickey5481]

I’m on my second pair of Keens in 5 years. Really good quality boots.

[@nicholassilva503]

really like my redwing boots. also think a collab with the perkins crew would be cool to see. 2 years into the trade and have learned tons from your channel so keep up the great content.

[@joshstorey4604]

Favorite work shoes are vans when I can and red wings when I need to. Video ideas : 1) origin story 2) math in construction 3) keep doing what you’re doing

[@2ddw]

Please do an episode on the videoing that you do!! That would be super interesting.

[@xaviertorrent7487]

It's been months I want to ask for a video like that!!

[@Cooper1]

I love my Keen boots. Those skate work shoes would be a nice addition! Also, I so appreciate these videos. They have really helped me be a better carpenter. Thanks

[@TBird89]

Another great explanation on why and how. That harness looks like it was definitely designed for chippies 👌🏻👍 Also good to see that plate fixed along the run as a back up not just for the individual but also to catch any tools from falling off. Our lives are way more important than installing plywood on a roof. 👊🏻

[@ericdyson659]

Favorite boots lately have been the Keen San Jose. Love this channel! Conent idea could be a laser level video/review. Keep up the great work!

[@AwesomeFramers]

What kind of laser?

[@ericdyson659]

@AwesomeFramers line laser or dot laser levels, whichever you guys utilize most when framing

[@AwesomeFramers]

@@ericdyson659 ok, I'll get working on it. That's a good idea, I don't do enough tools related content here.

[@stevew9563]

My favorite boots is my old red wings. Cant think of any ideas for videos. you guys do it all! Thanks!

[@michaelsargent9091]

i have been really liking my keen targhee 2, as far as video ideas coffee break would be fun

[@JBLewis]

"It depends" certainly applies in my daily work (IT).

[@LesWiles]

It's a fullfillment to your character that you reference the office 😂

[@Noticer-in-chief]

My favourite work boot is any comfortable and safe one that wears well. Get one or two of the Perkins crew up there to work with you for a week. It would also be fun to see Steve Baczek in a harness on a 10:12.

[@janderson8401]

I wore Knapp 6” farm shoes when I started back in the late 70s just like my grandfather and uncles wore. When I decided to get steel toed shoes I didn’t think the Knapps were as comfortable. Had a pair of Carolinas that were pretty nice. Been wearing Redwings for about twenty years now.

[@seanhorton3811]

I lived in Wolverine DuraShocks boots for years. Then they discontinued my favorite model. Still looking for my new favorite. Having fallen off a roof and boo-boo'd my wrist, I take fall protection seriously. Once you get used to it, it is just a normal part of your day. Having gear that is comfortable makes that transition so much quicker. I know you describe your tools as you use them, but would be cool to have a complete overview of your your favorites, why you choose them, and maybe some tricks of the trade that they help you with. You mention the Perkins Brothers, maybe a collaboration where you visit each other's projects and compare the differences in east cost versus west coast building.

[@williamdemilia6223]

EXCITING !

[@williamdemilia6223]

and it was!!

[@steves5028]

I appreciate you passing along information and the humor. I’m interested in some exterior insulation ideas, on a budget maybe, with items widely available. Read xps, or poly iso panels Happy Thanksgiving to you and yours!

[@Silverwasp337]

I’ve been wearing Georgia boots the whole time I’ve been working in a mill and going into the carpentry union. I just found a pair that works and buy the same pair each time they get worn out, I really need to expand my horizons. Anyways I’d really like to see more of the business side of construction, but I feel like that’d be boring for most people… anyways love your videos and would love to get a pair of keen boots and try them out.

[@mikeey8700]

Hey Eric are you guys hiring 😂😂😂, they are great with creating content but you explain the concepts way better boss thanks for sharing your knowledge-an apprentice carpenter

[@ALRob288]

Thorogoods have been my go toos for a while. Was looking at the keens today actually haha. Hmm video ideas, take off and bidding to plans and square footage rate.

[@MarkZelhart-un7cf]

The best footwear, or things I wear on my feet while working are Nicks boots. I have three pairs and it depends on what I’m doing that day to which pair I choose to wear. I would love to try the Keens as it would be something completely out of my normal footwear, things on my feet, and perhaps broaden my Keen ability to do new things.

[@twwtb]

Personally, I use the rule of 5s (yes, I made that up) If you are more than 5 feet up or moving more than 5 mph, you are defying the laws of physics. In either case, if you fall, or run into something solid, respectively, you will be hurt. Thanks for another very informative, well done video.

[@thormatteson7141]

Boots! I have four pairs of Red Wings, but with with Vibram soles and raised heels that catch on stuff. They've lasted 40 years*. But I need some with the 'wedge' sole that won't trip me up as easily when I'm not at ground level. Or below ground level. I'm catching up with all your videos, but if you haven't done one on lateral bracing for trusses, that is probably still something that needs attention.

[@Learethak]

I have some Duluth Trading Company boots as my work boots, but I will be roofing in the spring and could be convinced to switch to keens for gripping.

[@rotaxrider]

Much respect to you guys. As I'm getting older Im catching myself more saying, we'll get the young guns up there to do that

[@shepherdfree]

As a builder I’ve found trainers to provide the most all around use for footwear. Comfortable, decent grip, not a huge tread that drags rocks inside onto finished floors lol. Have you done a video discussing your drone usage on job sites? I’m thinking about getting started with it. Did you have to go through FAA testing and such? Thanks!

[@AwesomeFramers]

I did the Pilot Institute training (link above in the description saves you quite a bit of $$). I got a 96 on the Part 107 test. I think it was a 96 or maybe 94. I took a full 4 weeks to take that course and study and highly recommend it

[@Publicname6570]

i don't know the term here but you're allowed a cut sheet full on the overhang outlookers? see 30:08 if i don't make sense. also, what's that attic floor for that you set the peak trusses on?

[@AwesomeFramers]

Since the lookouts provide backing, the gable truss and barge board, provide backing, yes it can be a shorty piece.

[@jenc9080]

Never had a work shoe / boot -- so, I guess my favorite would have to be "old running shoes." Content suggestions: (1) how to order parts (e.g., wood, nails, tape); where you like to buy; how to get good pricing; what to ask for in delivery, how far in advance to order, etc.; (2) fasteners (what you use for different situations and why); (3) how to use various tools (e.g., table saw, circular saw, nail guns, etc.) + pro tips on using them, including blades and safety.

[@steziebear]

i love the keen work boots but haven't tried the shoes! maybe some more tool review comparisons?>

[@srchubz]

my current jobsite work footwear is my old work footwear: Solomon GTXs. Comfy and waterproof (western WA here). Very light as well. Grip well, too. Only downside to it feeling and handling like a tennis shoe: they basically are protection wise with respects to like toe area, etc.

[@Quietvibes07]

It’s like the older I get the worse I get… Lol 😂. Self deprecation is the greatest form of humor imo.

[@MrRafa2196]

Absolutely wear fall protection, just had an employee who fell off the roof while installing underlayment. He stepped on the release liner of Benjamin Opdyke VaporDry and slid off the roof and fell about 15ft to the ground. Which doesnt seem like a whole lot but resulted in a broken arm, 3 broken ribs, a punctured lung and broken hip. Unfortunate situation that could have been avoided using safety harness.

[@chriscook5875]

This is awesome

[@AwesomeFramers]

look at that young profile picture 😁

[@tommyt1556]

"If it's strong enough to hold my 185 lbs of ...twisted steel and sex appeal...and some other stuff that makes up the difference." -Timmy the Great Love your channel. Love your methods. Love your humor. Thank you.

[@AwesomeFramers]

People always say "you don't way 185lbs!" and I always say, "you didn't listen closely, the sex appeal weighs 185lbs" 🤣🤣🤣🤣

[@steves5028]

My favorite work shoes/boots are Danner.

[@davidestrich7055]

At 35:35 the panel should have been over one foot over to the right for strength and the filler piece inside the two.

[@AwesomeFramers]

No because it has support from the lookouts top and bottom.

[@keeganpickard]

How does that rope grab hold up to moisture and cold conditions? I work in New Brunswick Canada doing panelized apartment buildings and get so sick of the traditional rope grabs on the rope. The sliding action on that rope seems way smoother then the typical metal ones

[@AwesomeFramers]

We don't get as cold as you, but its great in the rain. Joe Canning might now instagram.com/canadiancarpenter/

[@xcaliber_gaming]

Do you have a list somewhere that shows all the equipment you use to make these videos ? Camera's Software etc... if so, put a link in description for me. 🙂 PS. what area do you live and work ?

[@AwesomeFramers]

I don't but I think I'll work on a video that goes through all that. We work in the specific northwest.

[@mattmag3089]

Tim, my fellow woodpecker, I know you've been around the block and definitely know by now what works well for you and what doesn't. But, if you haven't tried a lower toe board, please do. I run my kickers 16-20" from the bottom of the sheet, for a few reasons. 1, when transversly scaling said toe boards with a sheet on your shoulder (we work off a telehandler typically) your knee has a place (above kicker on the sheet) to brace your body against to maintain balance. There is a significantly less chance of falling between the trusses. 2, your feet aren't anywhere in the way of the (stupid, annoying..) h clips. With your knee bracing against the sheet it's easier (for me) do set a sheet in clips (especially a 14/12 with bowed osb -- typical). 3, at 16 ish inches, you can easily bend over to nail off the fascia while hanging on to the first row. Come join the dark side. Cheers!

[@2point..0]

I dont have any favorite work shoes/boots? But I would be interested to enter for a pair of those "Sticky Shoes" Liked and Subscribed!!!

[@bonnorbassidy8198]

Idk about for this but as a guy who does rigging in commercial wood framing and I walk top plate and beams and joists all day as well as on forklift only jobs in the mud and stuff I will never go away from my thourogoods. Love em to death the 8” tall bois are my fav and break in decently quick and can’t even tell their steel toes

[@AwesomeFramers]

@@bonnorbassidy8198 Thorogoods are a great boot. Have you checked out Keen Utility? I've been wearing them since 2013 www.keenfootwear.com/collections/mens-work

[@HerschelHorton]

You need a harness for that Drone Controller...

[@dzaino1986]

Are you building on the Mccormick Woods course?

[@AwesomeFramers]

Not currently

[@steveharkins279]

I can’t post any pics of my work,? Could you enable links to Imgur?

[@kylehennessy333]

What shoes were you wearing?

[@AwesomeFramers]

Keen Utility

[@stich1960]

Ecco are my current work boots but unfortunately the quality has gotten bad, you might have me convinced to try nicks, but im scared because almost everything with few exceptions causes me some bad back pain at the end of the day. Keen used to be great before they changed 5 years ago or so and instantly started being one of the shoes that cause me back pain.

[@lb7wade518]

Why does one side of roof have overhang and the low slope have no overhang

[@lb7wade518]

Never mind I see what it is!!

[@darinmickelson7964]

What happened to “old Kyle” I don’t remember seeing a post about him leaving

[@JimHolden-nv2xj]

Fall protection is great AND if you are in a position to need fall protection then a RESCUE PLAN needs to be part of that. Once you have fallen and are dangling in your harness is not the time to go looking for the gear needed to get you down.

[@buttermonkeyFTW]

Set 18 trusses on wednesday on a small-ish building. Not a single one was the same length or height and each one was banana-ed like crazy. Never any inconsistencies with trusses lmao

[@dylanmiller7792]

Keep in mind that you need to consider the fall arrest distance if you do fall so you don’t hit the ground or other obstacles before it actually breaks the stitching away, otherwise, your set up is just for show. It’s also important to come up with a plan that if someone does fall, and ends up hanging in their harness, you can rescue them quickly. There are serious / deadly medical issues that can happen if hanging in a harness for too long.

[@michaell.maloney4026]

Increase the air pressure about 5#’s would help, but like you said further down the road they go too deep..I’m always saying WTH!😅

[@tedspens]

I've always wondered why the safety rope is attached to the back, instead of the front so I might be able to climb back up instead of dangling there like an idiot. Is it safer or just done to make sure everybody knows I fell and can't get back up? I think it's the later. Still, be safe out there folks.

[@AwesomeFramers]

Way back in the say they were connected to the waist, that leads to more injury during the fall.

[@tedspens]

@@AwesomeFramers I remember. I made a duct tape shoulder straps to keep it around the chest. Never tested it, fortunately.

[@ryanrandall902]

Where can a guy find that rope grab?

[@stevenleiler9034]

You guys and the Perkins are all i can watch. they make good videos but I wish they would take some notes from you on framing, that gets hard to watch sometimes. The time they waste leaving things off till later and doing stuff off staging boggles the mind.

[@AwesomeFramers]

I love those guys. Definitely a different way of doing things. I've specialized in framing since 1997 so that really helped us get efficient. That translates well to siding and foundation work too

[@stevenleiler9034]

@@AwesomeFramers Yep been framing on my own since 83, always by the job, never buy the hour, so that forces you to get efficient. Got wall jacks and saved up for a Lull. Now were old but still out producing larger crews.

[@jacobbuckley8232]

I cant believe Perkins bros do all their recording with phones

[@stevenowell]

No 10 / 12 Pitch for me please and thank you

[@stevedavies1261]

Hmmmm 4:24 rope slack, looking just about long enough for a person to break both legs as they hit the ground...5:18, crushing OSB sheathing with a hammer is a great way to reduce it's shear strength to ZERO... But do continue...Homes used to be built to a 100 yr longevity standard, THIS, the first rain before shingling with turn this into a 10 yr then fail standard...-

[@AwesomeFramers]

You are 100% wrong about the crushing the OSB and reducing shear to zero. That is pure fiction. As far as the slack, you are correct, there is too much. Not as much as you'd think. I'd go over the edge but feet wouldn't touch the ground. Like I said in the video, I make mistakes with fall protection all the time.

[@steveharkins279]

Sent you an email. “The flying wing” steel, wood, and steel rod construction. Including a 2 x 12 x 24 foot dead man in the rafters to pick up 2 skylight toped cupola’s.

[@steelheadattack]

roof jackkksss. Watching u balance on the edge of 2x4 almost had to turn off!! ur not predator with big claw feet jezuz!!!

[@AwesomeFramers]

Sorry bro, this is how I was trained. We use jacks on 12-12 sometimes

[@greeboart]

16:19 someone still doesn't trust the gear.

[@AwesomeFramers]

False. Toe boards on a 10-12 make it easier to work.

[@greeboart]

@@AwesomeFramers Sorry, I should have clarified that I meant the hand on the rope rather than putting your weight on the rope to have 2 hands free. Most likely due to the harness pick point being at the back and sitting in a back mounted full body harness isn't comfortable.

[@AwesomeFramers]

@@greeboart gotcha. I was going my Dwight Shrute impression above 😁

[@stusue9733]

And of course, don't fall while your hand is on the up hill side of the prusik knot. I'm a little surprised you are allowed to use them.

[@AwesomeFramers]

No one in construction actually falls with 1 hand on the knot, in fact falls from roofs are very rare, most falls are from below 6' or off ladders.

[@stusue9733]

@@AwesomeFramers Oh don't get me wrong. I'm not saying you are wrong, just that the safety people tend to err on the side of "make it so safe no one can do anything"

[@garydoherty9399]

Not be easier putting the machine around the side ur working

[@AwesomeFramers]

It definitely would, but the septic was back there and we couldn't drive on it

[@garydoherty9399]

@@AwesomeFramers am a roofer / slater from Ireland keep the videos going

[@williamdemilia6223]

@@AwesomeFramers I thought there was a good reason why you were not using the lift.

[@BasBommel]

Why don't you feed from above, from the attic... just slide the panels down...😮 Also..... maybe it's me but my Hikoki work's just as gast even with continually feeding it strips😃

[@jimcraiggeezer]

Don't you guys use scaffolding..unbelievable.

[@AwesomeFramers]

Nope, have you looked at the cost? If so, please let us know so future readers can decide for themselves what is cost effective in a particular circumstance.

[@lightning9279]

The British are kings of the scaffolding. I believe it is mandated by their government. The US government is normally around 10 years behind England's governmental decisions. It's only a matter of time before it is mandated by our bureaucrats.