Tank Gearbox Restoration! (Tank Project)

Support the channel by downloading War Robots on your iOS/Android device for FREE bit.ly/WR_maste... and get an awesome starter pack!
Technical components: www.indi.nl
▼Click here for more!▼
Today we are continuing our Tank Project. This time we take a look at the gearbox of the tank, in what condition is it?
Behind the scenes & more?
Check out our 2nd channel: / werkplaatsvlog
Would you like to contribute? Check out our Patreon!
/ mastermilo
Follow us on:
Facebook: / mastermilo82
Instagram: / mastermilo82
Merchandise: shop.spreadshi...
Website: mastermilo.com/

[@mastermilo82]

Support het kanaal & Download War Robots GRATIS op jouw iOS/ Android toestel! bit.ly/WR_mastermilo82 Ontvang een geweldig starter pakket! Should we spray the gearbox with some paint? Zullen we de versnellingsbak een lakje verf geven?

[@paulterhaar4862]

It should be painted pink. Do it for Dirk!

[@destructionnl8165]

Zou het wel doen, zo mooi blank als-ie nu is blijft-ie vast niet...

[@MrCrystalcranium]

YES...PLEASE PAINT IT!!! Just incredible work. I watched all of the daily workshop videos and this was a chore. One word of warning. I was watching a video put out by The Tank Museum in England and they restored a T-57 with the exact same steering and gear box and a very minor problem with the steering linkage caused the bare metal clutch plates to become so overheated they melted together during Tankfest 2019. It made me think of all the sanding and polishing of dozens of those metal clutch plates you did and how it all might be wasted by one little slip up in fine tuning the linkage. BE CAREFUL!!!!!!

[@erikjongejans980]

Kijk hoe het origineel is. Is het origineel geverfd dan zou ik deze ook verven !

[@aisejongsma3042]

Paul ter Haar nah the tank needs to be profesional otherwise he maybe cant sell it

[@teastroyer2812]

If everyone had such DiY skills like milo, the moon would already be inhabited by hobby astronauts

[@paulterhaar4862]

A Roll-Golf on the moon, that would be really funny :-D

[@divicio1]

Don't give milo ideas now...

[@MaraDaCoriovallum]

The planet Mars too....but at the moon, Milo wants only go on the sunny side of it....the dark side are only for very strange people.....

[@MaraDaCoriovallum]

@@divicio1 after the helicopter and the submarine, he will go for a spaceship....I think....

[@GarnettM]

No doubt eh !

[@Emils2006]

I will watch this until I speak dutch fluently :D

[@remy038]

Top dat je weer kijkt ;)

[@SeanApplePie]

vloeiend spreken gaat het best met bier

[@Loepert_]

veel succes makker zullen we even oefenen? (translate that :P)

[@mcjiprock]

De taal leer je horizontaal!

[@Emils2006]

ik hou van je , is the only thing I remember, my ex gf was dutch :D

[@-._.-._.-]

* opens random part * ... a lot of rust .... Emile: "Ah looks good!"

[@topsecret1837]

Those cogs at 4:46 are pretty darn tame compared to the other rusted parts they found, including the entire side of the engine with parts completely destroyed by rust.

[@coltonjacobs5383]

They don’t really care about the rust, just whether the part is worn or there are teeth broken.

[@NandiCollector]

😂😂😂

[@Emanistan]

Master Milo is the only KZbinr who's fun to watch even while he's plugging his sponsors.

[@johndowe7003]

too bad we dont understand what the hell theyre saying x.x

[@johndowe7003]

@@mattmathew6706 yeah i use those

[@AlienX511]

Damn that pink forklift so gorgeous. I want one myself to lmao

[@parkeerwacht]

on their 2nd channel they made a video painting it pink in vlog 100

[@svenvolwater5473]

I have the same one but its red😂

[@kitecattestecke2303]

@@parkeerwacht why? Any reason to paint it pink?

[@rick9364]

@@kitecattestecke2303 Running joke. They joke that Dirk likes pink because his old golf was faded red which started looking pink. People started suggesting that they should paint the forklift pink so Dirk would drive it more and they did that to celebrate their 100 wp-vlog.

[@MrStol]

"Heftrut" instead of "heftruck", heerlijk 😉

[@mailltlas]

As a french looking at an English subtitled Dutch serie about tank repair, I can tell you, what you're doing is amazing. My little contribution : 12:18 I think, as well as gearing box, engine, tracks, the big gun might be a source of an uncomfortable noise. xD

[@Francois_Dupont]

bonjour ami francais!

[@neilcowan535]

Damn you just ruined it for me. I didn't know their were subtiltles and i've been watching it and laughing a lot, until now! :D

[@mailltlas]

@@neilcowan535 you're welcome =)

[@frenchtoad1308]

une bonne série effectivement

[@railtrolley]

The main gun. The elephant in the room.

[@oscarzt1652]

versnellingsbak we are learning slowly

[@mrschwifty5564]

Greetings from America to all my Dutch friends I love you guys keep up the great work.

[@bhinkle530]

That forklift needs a Hello Kitty sticker or two, just to top it off. :-)

[@malakiblunt]

Yes ! in fact he should paint the tank in full Kitty liverage too :-)

[@bluef1sh926]

NOOOOO, *DON'T* put the seized bearing back in. Even though it turns again, it's no longer good. Good bearings cost as little as 2,50€ so there is no reason not to replace it.

[@bluef1sh926]

@chibikong I noticed that, but they cleaned the bearing like they wanted to put it back in.

[@madkills10]

Are you really tryna tell these guys how to do their job? Get real haha

[@bluef1sh926]

@@madkills10 pull that stick out of your ass...

[@benjaminbenavidesiglesias52]

I agreed, thats for sure!!

[@zaias77]

I noticed that to.. i was suprised they not seem to replace any bearings at all...concern all the job it was to take it down why not replace all old bearings with new ones ?

[@drakonisful]

I was introduced to your videos by a friend of mine i am amazed at the quick progress of your restoration of the tank! Love the work you and your friends have done very inspirational! Ive been a automotive mechanic for 25 years and its not just a job it's a passion as well your doing one of my bucket list that i would love to get my hands on to restore a military tank of any kind! I live in the United State's and to find something anything remotely close to a tank would be a Bradley troop transport that i could pick up for cheap is in Texas military salvage yard thinking hard on it! But all in all keep up the great work and thank you for the videos keep them coming!! Peace out brothers!!!

[@DNOFHD666]

Love your videos great hard work in this tank i enjoy the tank project ..i am From saudi arabia i am subscribed from while now in your great channel i wish you complete this project asap

[@ramzcsl1349]

So looking forward to the completion :)

[@RoelvandenBergWillemWasbak]

Die reclames voor spellen vind ik altijd een beetje ongemakkelijk.

[@jurjenwiersma]

Jij mag gratis deze leuke filmpjes kijken al die man uuren moetten toch betaald worden net als alle benodigdheden voor de tank en werkplaats vind het al heel wat dat het zo kan

[@RoelvandenBergWillemWasbak]

@@jurjenwiersma ja dat weet ik ook wel, vind het ook prima maar hoe Milo het brengt vind ik een beetje ongemakkelijk.

[@hillrecords2921]

@@RoelvandenBergWillemWasbak niks mis mee joh laat hem 😅

[@sasjadevries]

@@jurjenwiersma Facepalm. Iemand heeft het over dat de manier waarop een reclame in elkaar zit, ongemakkelijk is. Vervolgens kom jij met een argument waarom reclames überhaubt getoond worden. Dat zijn twee compleet losse dingen. Helaas zijn de politieke debatten tijdens verkiezingen net zo bagger.

[@YZFMANIAC08]

Ga janken jankmuil

[@builtbyWikander]

Thank you to those who translates! This was one of the better translations!

[@jeffreysomers5452]

Theo S when you look to the other vlog s you can see the translation guys 👍

[@davebrittain9216]

Milo I hope you were kidding about that rusted bearing being like new. Replace it or you will just have to in the near future!

[@zzzires5045]

the pink forklift brings out your eyes milo! keep up the good work

[@opel921650]

Это кпп от Москвич 412

[@chrispy104k]

For those questioning the strength of straight cut vs helical (slanted) cut gears, have a read of this. automotivethinker.com/transmission/straight-cut-gears-vs-helical/

[@Gwlyddyn]

One of the coolest channels on KZbin! ..but please guys! Safety! Parts washer with no gloves? Grinding/polishing without respirators? Neither is healthy for you in the long run. ;)

[@jochemhoogantink8075]

Gwlyddyn the parts cleaner is just diesel no filthy chemicals

[@Gwlyddyn]

@@jochemhoogantink8075 Diesel is still far from healthy for your skin. :)

[@jochemhoogantink8075]

Gwlyddyn as long as they regularly wash their hand with the workshop soap from indi it should be fine since there are skin care products in most kinds

[@LionKing-fe8qb]

Судя по разговорах - немцы наверное. Молодцы, крутой проект! Привет из Киева! ))

[@ilyagorbachev5188]

Голланды. Эмиль живет в Барле-Нассау, Дирк, наверно, тоже.

[@biramaiba3491]

Saludos Master-Milo desde México, me gusta mucho el proyecto que está realizando.

[@Tibet-Beautiful]

This work requires patience

[@Newbiecoco]

NOTIFICATION SQUAD ANYONE??

[@bobbybandz9194]

Straight cut gear are stronger in terms of what theyll take,slanted teeth engage smoother, its for consumer comfort.

[@davidlawrencebanks4610]

Great job, thanks for the English subtitles

[@rinyvanabel3467]

Toch zijn die Russen niet gek, want het is hun techniek die gebruikt is. Maar wel goed van jullie hun techniek doorzien.

[@Janbore]

thanks milo for this series. it's very interesting to watch. Greetings from finland!!!

[@mariobijvelds9760]

danke fur das video es ist super gut

[@robinrandy]

master milo with pink forklift is like superman with skirt...

[@usget]

Amazing really - the gearbox has been sat full of water, neglected, abused... and yet all it needed was a clean up and reassembly, No replacement parts needed.

[@Taceau]

Russell Gowers Mother Russia engenerink iz stronk

[@TheFulcrum2000]

@@xavierrajda933 China did the assembly, the engineering (design) was done in russia.

[@Taceau]

Bas werkt nu gewoon mee! 17:30

[@Bartus1989]

Ah, net 15 seconden geüpload. Perfect getimed dacht ik!

[@jacobcox198]

Why doesn't all the videos have usa subtitles I'd really like it mutch more if u did this please thank you Jacob Cox usn veteran nebraska usa

[@martijnvv8031]

Most videos on the 2nd channel get subtitles, it's done by a group of volunteers so give them some time.

[@captainhotrod7948]

That was an excellent video. You do great work. I would get sooo much more out of it if I spoke your language. Do you have an english translation channel?

[@ydavevr4]

Captain Hotrod turn on English subtitles, they have a generous team doing translations for them.

[@SupesMe]

Can’t get enough of this Milo! I’m learning so much about mechanics too

[@NarfBLAST]

Mastermilo82's forklift and Mustie1's forklift (kzbin.info/www/bejne/p3-uYXmniJamkNU) are my favorite forklifts on KZbin.

[@sjorswink5602]

Kom je uit Friesland ? 👍🏻🤙🏿🤙🏿

[@casperdeboer627]

bizar interessant dit, alleen ik vraag me af tot hoeveel bar die compressor zou gaan en hoeveel bar er dus op de flessen komt te staan. Want ik heb het gevoel dat je wel wat luchtdruk nodig heb om het motorblok te starten.

[@martijnvv8031]

50 Bar. Laten we maar hopen dat de flessen niet van binnenuit zijn doorgeroest. Kon nog wel eens een harde klap geven als die kapot gaan.....

[@stuka97]

Greetings from California USA, love your channel as I write this we’re I live is on FIRE as all of Southern California seems to be. Great to see you guys restoring this historic tank. All the best!!!

[@LievenRobert]

Die tank versnellingsbak is net zo groot als een hele Zoefzuki Alto 🙈 🤪

[@henrikbragge]

What a beautiful gearbox - this is tank class stuff! Imagine putting this in a car - it would never ever break 😂 I admire Milo and his “side kick” and all the other guys that show up! I’m watching from southern Sweden 🤟🏻

[@akira8817]

0:34 *noice*

[@TimXq]

Bru😂

[@flakolik]

my dutch words of the day, khalopelage = bearings, versnellingsbak = transmission and HOOPPAA! = there you go. in this speed I will be able to speak Dutch fluently before the tank is finished!

[@jimmytjomsland6132]

Young Men! I would like to suggest wearing latex gloves while in grease and particularly Your parts cleaning tank. You are absorbing nasties through Your skin without glove protection. Love Your due diligence and masterful mechanical miracles!! Thank You both!!

[@MikMech]

I reckon I could use that gearbox on my Quad Bike ! I need something that will handle 12 Rampant Ponies.

[@gestoriaradicacionradicaci9315]

Hello Master Millo ,a question I seen this gear box have drive a air compressor for start the engine ,what pressure work tha air for start the engine? ...thank ...and congratulations for that job ..from Uruguay

[@grexursorum6006]

Sometimes i watch youtube-vids and think. Damn i wane do this too. But nope, not interested in Tank restauration :-) I am glad that i can watch this out of the comfort of my living room :-) Great work!

[@mathijstenhagen]

Yes ik heb herfstvakantie en wat doe je als 1e....natuurlijk Mastermilo kijken😀 duimpje als je ook gaat kijken👍🏻

[@robbleeker4777]

Eventjes open maken........30 minuten later......Dat zie je meestal, de dingen die je eventjes doet doen vaak het langst... (uit ervaring) LOL

[@jessicashelswell44]

Pulls down entire box to realise it was one seized bearing probably accessible from the outside then proceeds to scrub the housing but doesn't replace seized bearing. Transmission Mechanics 101

[@rrl4245]

Hi Guys, What's going to happen with the turret? Is it being refurbished? Can you, will you be able to reinstall it to complete the tank?

[@FedericoLucchi]

You need to get a sand blaster, it would make these resto-jobs so much easier (at least when it comes to de-rusting the engine, gearbox casing, body, etc)

[@thijsdekerstman]

Restoratie? Taalnazi in actie.....restauratie 😂

[@crazymtbrider]

Ha he was cheesing getting a couple shots of the pink forklift,looks tight in the workshop when it's spread all over the floor good job tho it was educational

[@sidewaysaction9983]

Old school if you don't have the tool just make it. Proper spannering..

[@sietsjonkers4350]

Hé Mannen , zijn jullie toevallig bekend met het bedrijf Koch GmbH , in Rocken sußra in Zuid-Duitsland. Dit bedrijf sloopt oude tanks, en misschien zit er wel iets tussen,mits ze verkopen. Want dat kan wel es een probleem zijn. Maar wie niet waagt , Wie niet Wint😉😉. Grt Siets jonkers

[@jimmesch]

12:10 Emile had de woordgrap van Dirk niet door Tank ik

[@andreasfrind6632]

You didn't have to time the gears? Normally in big rig transmissions you need to time them and check gear lash

[@sjoerdplantenga6825]

Ik wil gewoon even zeggen dat ik zoveel respect heb voor jou. Ik leer hier meer van dan een techniek les. Respect.

[@orbitalair2103]

Hey lets hammer on aluminum sealing surfaces. Geez guys, a little finesse. Howd you break a boss? And did you tear down the gear shafts and inspect them?

[@MrBugsier5]

Het is precies andersom, rechte vertanding is sterker, maar maakt meer lawaai, schuine vertanding is stil ,,maar minder sterk...

[@sasjadevries]

Nope. Bij een schuine vertanding haken tegelijkertijd 1.5 of 2 tanden aan, bij een rechte vertanding gaat alle belasting naar 1 tand. Dus de vertanding zelf is wel degelijk sterker bij de schuine. Alleen heb je bij schuine tanden dat de tandwielen opzij worden gedrukt, en dat de assen waar ze op zitten ook rare kanten op gebogen worden als er veel moment of komt te staan. In de praktijk zorgt dit er vaak voor dat tijdens zware belasting de assen waar de tandwielen op zitten uit elkaar worden gedrukt; en daardoor breken tandjes van zo'n tandwiel af. ^om deze reden hebben ze in de autosport rechte tanden in versnellingsbakken.

[@wellzz2127]

Подписывайтесь на канал, говорит гараж54, будет круто, говорил он. НО С*КА О ЧЕМ ТУТ ГОВОРЯТ? БЕЗ СУПТИТРОВ НИ БЭ НИ МЭ НЕ ПОНИМАЮ

[@辻雅俊-j2w]

スゲーな！めっちゃ大変やん

[@Igornikolaev84]

15:09 ооо, Луи Витон =)

[@АлександрИванов-ю5э6н]

молодцы чуваки!Наши люди,и газом умеют работать,и кувалдой!Уважуха!

[@fedor_Ivanych]

Будь мужиком! Перекрась автокар из розового в более брутальный чёрный или серый!

[@hazur1815]

Dommage je comprends pas grand chose mais ça a l’air sympa

[@ErikS-]

Ziet er nog goed uit (6:50) na zoveel jaren! Ik was bang dat ze droog hadden gestaan en daardoor helemaal vast zou zitten. Je hebt behoorlijk geluk hier want die tandwielen vervangen was extreem duur geweest En schuine vertanding is minder efficient (11:36)

[@JENi-vx3yn]

build escalator ladder for your workshop next. :D

[@dlyle]

You were incorrect about straight cut gears. They are inherently stronger than helical cut gears. You will see the surface area is higher on the helical cut. It’s for noise reduction. But thinner teeth means can handle lees torque.

[@Akkillies]

WTB subtitles, I don't speak drug addict!

[@emanuelgoncalvessantos4499]

Grande trabalho! Saudações do Brasil!

[@JYKDutchYT]

Ik heb een suggestie voor de volgende nutteloze experimenten. Water in de motor gieten en tegelijkertijd terugschakelen naar de eerste versnelling op hoge snelheid. Ultimate carnage

[@zapravshik67]

хороший компрессор, можно газ из сети, метан, закачать в баллон авто )))

[@ricoIII]

Straight cut gears are stronger than helical gears, but are noisy as hell, listen to a rally car going through the gears and you'll hear the difference between helical and straight cut gears.

[@MycroftMobil]

Gotta love the pink forklift.

[@Jaszczur-sp2tx]

Slanted gears are not stronger than the straight cut ones. You have your translation wrong

[@menno763]

He said they are in the video due to more surface area

[@paulterhaar4862]

Remember, this is a design from the late '40's, early '50's, metals weren't that strong like today.

[@Jaszczur-sp2tx]

@@paulterhaar4862 race cars use straight cut gears for a reason. They are stronger.

[@saurabhsuri3879]

BKL, atleast have english subtitles in your videos.

[@towlie911]

What kind of degreaser is in that parts cleaner? Is it safe for your skin?

[@andreww.6283]

At the rate that you completing this tank, you need to consider what the next project will be. RollTank maybe?

[@curiosity_saved_the_cat]

Or a tank with a different kind of engine; 2nd hand m1 Abrams.

[@aronvries6029]

Ik heb jaren lang in een garage gewerkt en aan meerdere monteurs gevraagd: waarom achteruit altijd meer herrie maakt als de andere versnellingen. Nooit een antwoord kunnen gekregen. Kijkt een aflevering @mastermilo82 en mijn levensvraag wordt beantwoord.. 😅

[@janhendrikfranke]

Slanted gears are NOT stronger.

[@Split10uk]

Technically, on a tooth versus tooth comparison, a helical gear can carry a larger load seeing as it is diagonally positioned on the gear (assuming tooth size is equivalent). This means that it distributes the forces being applied on it much more efficiently compared to a weaker, vertical tooth.

[@ken3234]

I believe the tank used a straight cut gear for the torque it needs because of how massive and heavy it is.

[@tolga1cool]

Actually straight cut gears are stronger then slanted ones Edit: They aren't really. See explanation below

[@madkills10]

Hmm iv always pondered this myself but i dont think they are. how are straight cut stronger when they have less surface area bearing the same amount of force? I thought the main reason they are used in racing is for "un-syncronized" gear boxs so they can slam it into gear

[@tolga1cool]

@@madkills10 Alright. I had to look it up in my old Uni documents because tbh I wasn't sure anymore. So the reason to use helical gears is a smoother engagement of the tooth and thus smoother and more silent operation. For a given size a helical gear actually is marginally stronger then a straight cut one (my bad). On the downside though helical gears produce (depending on the angle) quite a bit of axial thrust, which for high torque applications means significantly more load on bearings, shafts and gearbox shell. This is the main reason you use straight cut gears in racing. Also the efficiency of straight cut gears is marginally greater (because of reduced losses in the bearings mostly). Also they are more expensive to manufacture then straight cut

[@tolga1cool]

@@madkills10 So if you look at it from a racecar perspective the takeaway is that it's easier to just manufacture slightly larger gears instead of making a beefier gearbox shell and using stronger bearings. For road cars or anything else where noise and smooth operation is a concern you use helical gears

[@aluminium3574]

tolga1cool with straight gears you only have radial forces. With slanted gears you have radial and axial forces. That sad, in my opinion is straight gears stronger....

[@tolga1cool]

@@aluminium3574 There isn't much opinion in the matter tbh. Helical (slanted) gears are stronger for a given size because there are more teeth meshing at a single time. With straight cut gears you essentially jump from 2 teeth meshing to 3 and back to 2 again. You don't have that with helical gears. It's more uniform. Hence why it's a tad stronger

[@jurgenbussche]

vond dit kanaal top tot je een sell out werd you tube smijt ons al reclame genoeg rond de oren . echt jammer :( , hoe mensen zo omlaag kunnen vallen voor geld . heb infeite ergens medelijden met je daar je jezelf zo zielig hebt gemaakt

[@bashoevenaars7381]

Evapo rust of een product van WD 40 om de boutjes en moertjes te laten ontroesten beter dan een beton molen beschadigd ook de schroefdraad.

[@hubertgunpowder]

Wow. Wat een grote versnellingsbak. Mooie video !!

[@sivodesilva9866]

1050 mensen per minuut geken tot nu toe...dat gaat MASTERRRRR

[@hillrecords2921]

Welke vloeistof komt er uit de wasbank? Lijkt op afval olie?

[@ronaldvanmil2509]

Echt waar jongens? Een roze vorkheftruck?

[@giggling_boatswain]

I wonder why this repair is done? Disassembly is not complete. If for myself, then it is not entirely clear to me only a partial replacement of bearings. If you have already opened the housing, then all bearings are subject to replacement, without exception, regardless of their condition. You do not know the operating time of old bearings. Replacing the bearings after assembling the entire tank will be very problematic. The same applies to engine repair - this is the most technologically difficult part. Why did you decide that the condition of the crankshaft journals and frame bearings is good? They did not disassemble. If you do this repair for the subsequent sale of the tank, then everything is clear to me.

[@davekroon3571]

They checkt everything on there Other channel werkplaatsvlog

[@robnieuwendijk7348]

Lagers die vast zitten altijd vervangen. Als ze vast geroest zijn lopen ze binnen de kortste keer in de soep

[@소주맥주-g2w]

Thx. I can see big big module.

[@ernesttotti7792]

Т-55 рулит!

[@mikakumpulainen1246]

That's some stupid sounding language.

[@douro20]

I wouldn't call it mooi I'd call it mat...

[@Lyzzzander]

YEE boi! Gearbox ! Look at this monstrosity !

[@ithehuman007]

Dutch is like when U visit a dentist he gives U injection.