REBUILDING THE CHEAPEST RANGE ROVER IN THE UK | PT1

  Рет қаралды 1,082,350

Mat Armstrong

Mat Armstrong

Күн бұрын

Пікірлер: 714
@Ben_drvr
@Ben_drvr 2 жыл бұрын
Mat, by now you must a-door this car 😉
@MatArmstrongbmx
@MatArmstrongbmx 2 жыл бұрын
Wow 😂
@simonfearing4907
@simonfearing4907 2 жыл бұрын
Give "rover" Guys these puns are terrible
@bakern1309
@bakern1309 2 жыл бұрын
@@Lamster66 You should've just left the puns to the other guys mate😂
@The_journeyy
@The_journeyy 2 жыл бұрын
Brilliant 🤣
@ray5952
@ray5952 2 жыл бұрын
I can tell mad will go R(over) the top with this car 😉
@paulinekay5241
@paulinekay5241 2 жыл бұрын
The problem with the rear door to quarter is that you can't take a door from one car and guarantee it will fit another. I work for JLR. The tooling wears so the nut plate in the door and the hinge position are constantly adjusted to ensure the gaps and flush are correct. To correct the rear door to quarter gap. Slightly loosen the bottom door to hinge bolts. The bottom of the door will move inwards and correct the bottom of the door being over flush to the quarter. You will have to do this several times until you get it in the correct position. Use the paint marks beneath the bolts as a guide. Loosen the bolts, let the door drop inwards and then push the door out with your knee as you tighten the bolts up in the required position. Then do the same to the front door to match the rear door. You will then need to take the bottom of the fender inboard to match up with the front door. Regarding the style lines. Instead of moving the hinges move the door striker to line up the style lines on the door. On the tailgate. It needs raising up on both hinges. That will correct the style line issues.
@brandenalexander6038
@brandenalexander6038 2 жыл бұрын
Like so he can see this
@Karl-sq5ng
@Karl-sq5ng 2 жыл бұрын
There'll be lots of people over the years that'll google this info and you just saved them a ton of time.
@xOwebbyOx
@xOwebbyOx 2 жыл бұрын
I’m also a panel setter for JLR and can confirm this is correct :)
@davedave1027
@davedave1027 2 жыл бұрын
@@brandenalexander6038 why cant he?
@SeaJayBelfast
@SeaJayBelfast 2 жыл бұрын
​​@@xOwebbyOx Absolute legends. Only with JLR will you find staff who actually worked on the damn things lending a hand in the comment section.
@paulsj3273
@paulsj3273 2 жыл бұрын
There should be a plastic splash guard by the lower tailgate between the bumper and lower elements.
@alunesh12345
@alunesh12345 2 жыл бұрын
Believe in JESUS today, confess and repent of your sins. No one goes to heaven for doing good but by believing in JESUS who died for our sins. For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life.(John 3:16)🥳❤️😗❤️🙌
@paulsj3273
@paulsj3273 2 жыл бұрын
@@alunesh12345 fortunately I don’t believe in such utter shite and I can go about my day doing whatever I like 👍
@sarahedey6264
@sarahedey6264 5 ай бұрын
Well I work at body shop i can come fix it
@JAYPCARS
@JAYPCARS 2 жыл бұрын
You don’t see many of these being modified well, so I’m sure after Mat puts his stamp on it that’ll change 😁
@InsanityRenn
@InsanityRenn 2 жыл бұрын
Check out some Barugzai builds ...
@bmorris5863
@bmorris5863 2 жыл бұрын
@@InsanityRenn chavurgzai....
@InsanityRenn
@InsanityRenn 2 жыл бұрын
@@bmorris5863 have you seen any of Mats previous builds? 😂
@bmorris5863
@bmorris5863 2 жыл бұрын
@@InsanityRenn good point hahahaha
@maisosclips1082
@maisosclips1082 2 жыл бұрын
@@bmorris5863 hi
@stephenwhyment6653
@stephenwhyment6653 2 жыл бұрын
Genuinely glad KZbin recommended this video ! Normal lad doesn’t pretend to know everything and learns. Fair play ! Great channel
@JackMcNeillCars
@JackMcNeillCars 2 жыл бұрын
I got a feeling this one is gunna be the biggest challenge yet bro😭. Gassed for the transformation 🔥
@sammy_6c560
@sammy_6c560 2 жыл бұрын
Mat, I work for Land Rover myself there have already been comments about the dimple being for keyless entry but you also need to check the inside of the door matches up when it comes to wiring, motors and components that you fit back in as these can be different depending on the spec and options the car had for example the ones you took off will have wiring and mounts for meridian sound system. Also some parts from the same age and spec can be different if they have different vin ranges bit of a minefield
@brun_s
@brun_s 2 жыл бұрын
Yup agreed! I worked there 3 years on the door line alone with other quality departments and can say this is a spot on comment
@hassan.hadier
@hassan.hadier 2 жыл бұрын
Did u guys do an apprenticeship to get into a job at land rover?? 🤔
@brun_s
@brun_s 2 жыл бұрын
no mate, I applied for a job and was lucky at the time to get a job 1 of 1200 jobs with over 50k applicants… good money but you do graft in some areas! I was quality so I was quite lucky
@hassan.hadier
@hassan.hadier 2 жыл бұрын
@@brun_s oh I see wow lucky you mate cuz I'm 16 rn and wanting to do an apprenticeship in mechanics becoming a vehicle technician that's why I asked lol
@brun_s
@brun_s 2 жыл бұрын
@@hassan.hadier I’d 100% recommend trying to get an apprenticeship with JLR or Aston Martin! Totally worth it. If you do so. Good luck 🤞🏻
@stephenmiddleton446
@stephenmiddleton446 2 жыл бұрын
The quarter is well in. There not spot welded the cold riveted and bonded due to being aluminium. I repair these at work everyday but can be done 😂
@Sharpster1000
@Sharpster1000 2 жыл бұрын
You already know this is going to be an epic build once it’s done. Can’t wait!
@dannyt3180
@dannyt3180 2 жыл бұрын
Yes you can wait and you will wait….
@dannyyt2012
@dannyyt2012 2 жыл бұрын
K I agree
@alunesh12345
@alunesh12345 2 жыл бұрын
@@dannyyt2012 Believe in JESUS today, confess and repent of your sins. No one goes to heaven for doing good but by believing in JESUS who died for our sins. For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life.(John 3:16)🥳❤️😗❤️🙌
@DSJEYES
@DSJEYES 2 жыл бұрын
Loving this series already mat. That dimple on the door is for keyless locking btw 👍🏼
@jamesstone7597
@jamesstone7597 2 жыл бұрын
Nice progress Matt, it’s just a thought but is that rear door of an SVR as I think they have more pronounced arches than the Autobiography & it lines up along the other shut lines 🤔
@gamersquadlifestyle
@gamersquadlifestyle 2 жыл бұрын
You mean "SV", but I agree
@piovo1
@piovo1 2 жыл бұрын
@@gamersquadlifestyle no mate the SVR
@4xbuu
@4xbuu 2 жыл бұрын
@@piovo1 they didn’t make a vogue svr, so it is sv mate
@piovo1
@piovo1 2 жыл бұрын
@@4xbuu no mate no no no this is pagani amg Bugatti saloon bro
@gamersquadlifestyle
@gamersquadlifestyle 2 жыл бұрын
@@piovo1 lol😂I even googled something I already know rn to make sure and time I'm such a massive LR / RR fan but there's no SVR version of the Range Rover Vogue the only thing close to that is a SV Autobiography, although there's a RR Sport SVR🤧 although in your case brother your right enjoy your day✌🏾
@ryanshaw3268
@ryanshaw3268 2 жыл бұрын
Big up rob what a brilliant bloke. Used him personally myself and what a decent bloke perfectly priced and amazing at his job! Welldone 👍🏻
@mauxie.
@mauxie. 2 жыл бұрын
Your work ethic and dedication are inspiring, I love the pace and tone of your videos as well. Super awesome channel
@petermaidment1175
@petermaidment1175 2 жыл бұрын
That rear quarter is just pushed in you could see it against the plastic liner trim that you removed. A body shop will repair that no problem.
@busy1162
@busy1162 2 жыл бұрын
Just make sure you go to a good body shop, easy fix
@simonblunden2151
@simonblunden2151 9 ай бұрын
Just love the positive attitude, the way you troubleshoot and make nothing seem impossible!
@LionTheHeart
@LionTheHeart 2 жыл бұрын
What a great hands on attitude you have! Great video Thank you!
@SimonBetty
@SimonBetty 2 жыл бұрын
Going to be my favourite series this. Absolutely loving it! Some lovely kits available for these. Could the issue be the door rather than the quarter?
@alunesh12345
@alunesh12345 2 жыл бұрын
Believe in JESUS today, confess and repent of your sins. No one goes to heaven for doing good but by believing in JESUS who died for our sins. For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life.(John 3:16)🥳❤️😗❤️🙌
@marklewin541
@marklewin541 2 жыл бұрын
"The mic enhances the noise". Does that mean those exhausts have been quiet 🤣🤣
@barrysaunders5243
@barrysaunders5243 2 жыл бұрын
Matt get in contact with Rob & Chris at salvage rebuilds, they could sort the 1/4 panel or jig it to be sure it’s straight, it would be great content for the both of you 👍
@bigdarbs19
@bigdarbs19 2 жыл бұрын
Yep, great idea.
@IanRMcAllister
@IanRMcAllister 2 жыл бұрын
Good Video! Just a thought re the rear door fit ... it could be that the lower part of the rear door itself below the fold line is bent outwards? Personally I'd take it to a Range Rover approved third party repairer (there is a list on the Jaguar Land Rover webite) and get their thoughts on what is wrong. They could also check the chassis. Estimates are normally free - Good Luck!
@givingtherek1315
@givingtherek1315 2 жыл бұрын
My thoughts too 🙌
@oresthse4668
@oresthse4668 2 жыл бұрын
Its agood day when matt uploads
@thobisanindlovu8976
@thobisanindlovu8976 2 жыл бұрын
you can say that again, I have been waiting for Mat to upload. I can not wait to see the final product cause it will be out of this world
@MLEvo440
@MLEvo440 5 ай бұрын
Look at the reflection on the rear quarter on 11:42 🤣🤣🤣
@nickgreennjg9158
@nickgreennjg9158 2 жыл бұрын
Matt that back 1/4 panel can be fixed with a good body repair shop . Keep up the good work mate 👍
@MrHald90
@MrHald90 2 жыл бұрын
Difference between the 2 handles is passiv entry with the one with Chrome surrounding and a dimple. Unlocks when you put your hand in between handle and door.
@tonywalters5396
@tonywalters5396 2 жыл бұрын
The tailgate hinges also crack and split so double check them as that is why the tailgate drops. You adjust but after a few cycles, it drops again. The door handles are both keyless entry, just different models. The modules in each door are coded and share some parts of the wiring in the loom hence you need the right module and loom. Hope that helps.
@Milajanexx
@Milajanexx 2 жыл бұрын
Hi Mat just started watching, I work within Special Vehicles at Land Rover. I have lots of experience with these models. Things like the door issues and wiring issues, the spec of the car makes all the difference in parts and wiring. Give me a message if you need any help I will gladly assist
@alunesh12345
@alunesh12345 2 жыл бұрын
Believe in JESUS today, confess and repent of your sins. No one goes to heaven for doing good but by believing in JESUS who died for our sins. For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life.(John 3:16)🥳❤️😗❤️🙌
@lex_uss
@lex_uss 2 жыл бұрын
I love this series and I am excited to see what the car will end up looking like. Also, at 19:23 if you approach the car with the key and you place your finger in the handle (it's touch sensetive) it'll unlock the car (and fold the mirrors out) and when you touch that little bump or the case of the FL door, the 2 lines then the car locks and the mirrors fold, I am sure you knew that but maybe I helped a bit! Keep u the great content!
@ahsanashraf6359
@ahsanashraf6359 2 жыл бұрын
11:44, the reflection🤣
@MatArmstrongbmx
@MatArmstrongbmx 2 жыл бұрын
Dead 😂😂😂😂
@zaizainjamal
@zaizainjamal 2 жыл бұрын
Don't worry about it matt. Its nothing you can't handle. Upto now you have overcome every obstacle you've had. You can sort this one too.
@Jack-ky5si
@Jack-ky5si 2 жыл бұрын
Hi Matt. The bootlid is composite plastic /fiberglas and could be cracked up by the hinges where they usually give way. If theres no cracks then a new set of hinges will sort it its very common
@Joshua.Cook7
@Joshua.Cook7 2 жыл бұрын
I support Mat by watching through every second, including the ads, so he gets that all important maximum watch time😉
@Noddyunplugged
@Noddyunplugged 2 жыл бұрын
Glass roofs/pano roofs and sunroofs too, all have quite a lot of weight to them. The weight in this rod will be fairly significant. If this slid down a verge sideways and was then stopped abruptly as reached the bottom/side, then the momentum and sudden stop may have shifted the top half of the car to one side slightly. Just a thought. I remember reading somewhere that a pano roof on a mini added 80kg to the roof. They massively raise a vehicle’s roll centre.
@GarageNineteen
@GarageNineteen 2 жыл бұрын
This video made me happy watching for some weird reason lol… seeing you fixed all the little problems for free! That’s amazing. I love it. Keep wrenching man !!
@TheLewisj63
@TheLewisj63 2 жыл бұрын
Something to watch out for if you decide to replace panels yourself, the car is full of self pierce rivets (just under 4000) because it’s around 95% aluminium construction, there are a few spot welds like the ones you pointed out but there are some SPR under the arch that you showed. Spot welds are usually in pairs and flush both sides whereas SPR have a button protruding on the underside. You can find an example of SPR if you look under the the gasket for the door aperture. You can get a handheld SPR gun but access will probably be an issue on an assembled car. Love your stuff keep up the good work👍
@MatArmstrongbmx
@MatArmstrongbmx 2 жыл бұрын
Thanks so much mate!
@fimsty
@fimsty 2 жыл бұрын
You have so much energy… I would’ve given up a long time ago. You’re an inspiration.
@smart3k
@smart3k 2 жыл бұрын
Got a pretty good bargain with that Mat, Saw one on copart the other day same age and slightly lower mileage that went for 20k Bodyshop could fix that rear quarter easily with a panel puller
@MR_MT_222
@MR_MT_222 2 жыл бұрын
Either the new rear door is the wrong one for the car or its buckled, will be a interesting project
@pachy444
@pachy444 2 жыл бұрын
😂😂😂 Nothing wrong with the door, the rear arch is pushed in.
@brunom.t7827
@brunom.t7827 2 жыл бұрын
I loove the passion you have for this car rebuilds,
@shravanramnarain2082
@shravanramnarain2082 2 жыл бұрын
Never the less, well done mat, your work is truly outstanding!!!
@axsh970
@axsh970 2 жыл бұрын
I love how Hannah (ig is his gf) helps him. It's just so wholesome.
@lilcre8or660
@lilcre8or660 2 жыл бұрын
just watching this car come back to life brings a smile to my face
@tunizieca9373
@tunizieca9373 2 жыл бұрын
The reflections on the quarter panel at 11:51 are just hilarius :DDD
@a_royal_payne
@a_royal_payne 2 жыл бұрын
The difference in the prefix of the rear door harness signifies the model year it was built, slight changes are made from year to year and why it didn’t work.
@derricksinfield6477
@derricksinfield6477 2 жыл бұрын
Love your channel mate 👍🏼 to close the boot on the range just press the top button it shuts bottom as well 😊
@gezdipz5425
@gezdipz5425 2 жыл бұрын
If there's access inside the boot for rear panel put a bladder in there and push out from inside just an idea 👌,looking good so far.
@grahambarnett6107
@grahambarnett6107 2 жыл бұрын
I think the rear lower panel has been pushed in as one, but not left any obvious creases or marks, go get the panel pulled, will be cheaper than even a second hand one.
@Fargoose96
@Fargoose96 Жыл бұрын
You give me Ben foster vibes, same accent and so so positive about everything
@Rich_padley
@Rich_padley 2 жыл бұрын
Hanna’s new daily coming along nicely 👀
@pjcppjcp5925
@pjcppjcp5925 2 жыл бұрын
Mat - besides doing a brilliant job on any car - you are just so entertaining and proving that patience and self belief will always overcome 99% of all challenges. What is a shame is that it looks like JLR cars seems to have the same reliability and quality as the old British Leyland motors - surely it just cannot be all down to the Midlands workforce??
@paulbeecham8313
@paulbeecham8313 2 жыл бұрын
Well done Matt and Hannah, great progress, speaking from experience all modern cars full of gadgets have to have matching door harness and modules cos in some strange way manufacturers must enjoy swapping one pin and one wire to create headaches for us novices 🤔 well done for patience and perseverance 👏👏 keep up the great content im hooked 🤩
@motoringnation
@motoringnation 2 жыл бұрын
Loving the video, looking forward to watching the rest of the transformation. Might be a daft question but - are you sure the 'new' rear door is straight? Afterall that could be from an accident damaged car and bent out of shape, your RR could be fine?
@alunesh12345
@alunesh12345 2 жыл бұрын
Believe in JESUS today, confess and repent of your sins. No one goes to heaven for doing good but by believing in JESUS who died for our sins. For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life.(John 3:16)🥳❤️😗❤️🙌
@jamesdanielsfanpage7610
@jamesdanielsfanpage7610 2 жыл бұрын
Maybe try quite a simple test, measure the gap between the frame on the drivers side then on the passengers side or measure the gap between the arches If it’s the same then you know you have frame damage if not then just body filler, or possibly wide body and fibreglass? 😂
@ScotsBeats
@ScotsBeats 2 жыл бұрын
theres little rubber stoppers on the boot you can adjust to line the the boot lid to the body, the have them on the bonnet aswell
@wandango5913
@wandango5913 2 жыл бұрын
Regarding the rear arch alignment maybe put a straight edge across the face of the wheel and measure how much it flares out in comparison with the other side
@philipeastham1607
@philipeastham1607 2 жыл бұрын
Re the rear door gap. It may just need a tweak and twist inwards at the bottom. The original door appeared to be better so give the replacement door a gentle nudge! I’ve had issues like this in the past with second hand doors. Good luck, nice car.
@simonwebster985
@simonwebster985 2 жыл бұрын
Respect man! Have to love an enthusiastic guy doing really frustrating jobs lol, addicted to your channel guys, keep er lit
@lukemcgivern292
@lukemcgivern292 2 жыл бұрын
Mat we just had this on my missus one, it turned out to be the electric strut, was pulling the boot offline. They’re crap and common prob. Her shut lines are perfect now!
@mattgreene01
@mattgreene01 2 жыл бұрын
And what about the car’s? (Sorry, had to)
@lukemcgivern292
@lukemcgivern292 2 жыл бұрын
Lol
@matteyre8711
@matteyre8711 2 жыл бұрын
Hi Matt, I would take that to a proper body shop so that they can put it on a frame machine. It will just need a few tweaks to true it up. You will find that those minor alignment issue will be resolved. Then its just a case of smoothing out the rough edges with body filler.
@thebigchip
@thebigchip 2 жыл бұрын
Love the way nothing phases you when you come across a problem
@simonfearing4907
@simonfearing4907 2 жыл бұрын
I've waited for your latest video to drop all week I've been stuck at home in the bedroom with covid and instantly my day has perked up
@TrueIgnition
@TrueIgnition 2 жыл бұрын
Bit of advise for the future get a straight edge like a piece of wood place it in the middle of the arch and look down and it’ll tell you if the quarter is folded in. Keep up the good work though! RR are a massive pain to work on
@SG.123
@SG.123 2 жыл бұрын
Replace the LHR door hinges and adjust the Striker position and the panel gap should change.
@benfel9403
@benfel9403 2 жыл бұрын
Like your point about the glass roof and would agree, that would at the least be leaking or out of line or like you say popped completely. ! Good luck with it..
@RichOvertonGasoline
@RichOvertonGasoline 2 жыл бұрын
Much respect mate, that RR looked like its giving you a right beating.. and you have only just scratched the surface… as always a great watch 👍🏻 can wait see how this turns out.
@ironlungthe3rd
@ironlungthe3rd 2 жыл бұрын
That soft close is part of the loop, if you take away the extra power that goes through as it completes you won't get all the door features.
@squeaksvids5886
@squeaksvids5886 2 жыл бұрын
Looks like this might be an interesting restoration. Looking forward to see this finished.
@markkingsland3444
@markkingsland3444 2 жыл бұрын
Could watch your videos all day, good luck with this build pal
@Kammandier
@Kammandier 2 жыл бұрын
i do engineering and I'm liking this journey this guy should have millions of followers
@SNERUAL_
@SNERUAL_ Жыл бұрын
I love Mats face in the reflection of the car, starting at 11:36 .
@jonnywray4372
@jonnywray4372 2 жыл бұрын
You’re well and truly gifted Mat, good luck, and keep us all updated please as you rebuild this gem of a bargain.
@TheMrFishnDucks
@TheMrFishnDucks Жыл бұрын
Entertaining first episode. Looking forward to more episodes. Keep up the good work.
@akashsp
@akashsp 2 жыл бұрын
Never thought I’d be interested in content like this but you’ve got me hooked! Looking forward to seeing this build completed
@zolo94
@zolo94 2 жыл бұрын
Lowered and bodykit range Rover i think a lot of your subscribers would love it.
@judebrown2672
@judebrown2672 2 жыл бұрын
My favourite yet. As I have a l405 autobiography it's fascinating to see everything in peices. You have the patience if a Saint. Well done.
@SilvesterP38
@SilvesterP38 2 жыл бұрын
I started watching your channel back when u had the bmw 1 series! I love the variety of cars you have brought to the channel and how you never give up on any challenges that arise! Great content as usual wishing you the best bro👍
@adamsgarage5119
@adamsgarage5119 2 жыл бұрын
The way the rear door lines up makes me think the quarter panel is slightly pushed in. No worries though! A good bodyshop would be able to pull it out with their frame machine. To me it doesn’t seem like the quarter needs to be replaced. Pull it put and use some filler. You don’t just want to fill all of the gap with filler though as it would probably crack later on. You want to keep your filler as thin as possible.
@Jahmed5635
@Jahmed5635 2 жыл бұрын
Excited for this build 😂
@jackwhoah1999
@jackwhoah1999 2 жыл бұрын
Btw you can turn the ignition on by just pressing the start button without your foot on the brake. I just thought I’d say as every time you need electrical stuff you have the engine running :)
@samdub
@samdub 2 жыл бұрын
Good progress! Part of a previous job I had involved sometimes removing and re attaching looms from van doors, I feel your pain!
@2spoons
@2spoons 2 жыл бұрын
Awesome 👏 👏 work Matt..... its all down to the detail
@kitatit
@kitatit 2 жыл бұрын
It makes me happy to see your girl enthusiastically supporting you. You guys are a great team. Much respect from Australia! ✊Subscribed!🤗
@carpediem4512
@carpediem4512 2 жыл бұрын
😂😂
@stevejeffrey1539
@stevejeffrey1539 2 жыл бұрын
I’m glad you didn’t go out and brought one that didn’t need repairing, this is going to be another great video 😜
@liammaguire8005
@liammaguire8005 2 жыл бұрын
I had the 3l Jag XF, which i believe is the same engine as this. Had both inlet manifolds crack at similar miles so keep an eye on that. Also had both EGRs give up and ruin the engine, constantly going into limp mode and stalling when coming to a stop. Consider capping them off and remap the engine.
@Kristoph109
@Kristoph109 2 жыл бұрын
Matt.... test things before you button it up. You do all this work and put it all back together then find out it doesn't work. Test the locks and power windows THEN put the door card on. :)
@ahmostaudros720
@ahmostaudros720 2 жыл бұрын
Nice one buddy..its a lot of work and can't wait for your next video
@oliverbarry3731
@oliverbarry3731 2 жыл бұрын
You can literally see the edge of the rear quarter has rolled over, also they aren’t spot welds, that’s rivets👍🏼 aluminium body panels are put on using bond and rivets👍🏼
@KOOIJBOY
@KOOIJBOY 2 жыл бұрын
Such an awesome car, cant wait for the next video! I think I talk for a lot of people when I say your attitude is inspiring!
@shravanramnarain2082
@shravanramnarain2082 2 жыл бұрын
Need more C63 content😫😫😫dying for it
@angussimpson5618
@angussimpson5618 2 жыл бұрын
I know you most likely won’t reply but i recommend replacing the oils or even opening up and replacing the seals + check on the mechanics of the transmission as it’s a very big failing point on land rovers in general. especially if you are going to be towing with it.
@davebromwich5359
@davebromwich5359 2 жыл бұрын
Superb content as usual, I love how you just give it a go and and enjoy the journey! Awesome
@thesmallnotesduo
@thesmallnotesduo 2 жыл бұрын
Now that's what ya call problem solving. Nice one buddy
@duaneodendaal895
@duaneodendaal895 2 жыл бұрын
Mat I suggest get a new quarter panel for the range rover. Gives you piece of mind and better finish
@adamleecornish
@adamleecornish 2 жыл бұрын
Thanks for uploading this today literally spent the last week watching everyone of your car vids in order and was on the last one as you uploaded this… so now I have this to watch tonight … so cheers 🍻
@limitles09
@limitles09 2 жыл бұрын
the issue of the loom for the window is just an issue of wiring configuration. with a bit of time you could have reconfigured the wires to run the windows without the soft close switch.
@richday5520
@richday5520 2 жыл бұрын
The panels are glued and rivetted on not spot-welded and the hinges have adjustment on all 4 bolts hard to explain but if your desperate I used to profile doors for jlr and I'm only down the road
@stephenbailey946
@stephenbailey946 2 жыл бұрын
I love Range Rovers, and watching Matt rebuild this car with such enthusiasm is great . Cant wait to see the end result
@Firewolf99HD
@Firewolf99HD 2 жыл бұрын
Number plate says SVJ subtle hint at the next car?? 👀👀🤣
@mudart23
@mudart23 2 жыл бұрын
Great work so far Mat, I think this Range needs some nice big fat Red Brembo Calipers fitted as an upgrade!
@gustennant5469
@gustennant5469 2 жыл бұрын
Welcome to the wonderful world of Range Rovers. I have a love/hate relationship with them. I can't wait to see the Mat Armstrong edition. 😍
@johnchandler6474
@johnchandler6474 2 жыл бұрын
Great vlogg as usual matt.I feel knackered just being a bystander to you're video's.
REBUILDING THE CHEAPEST RANGE ROVER IN THE UK | PT2
19:02
Mat Armstrong
Рет қаралды 907 М.
FULL BUILD - REBUILDING A CRASH DAMAGED 2019 ASTON MARTIN VANTAGE
3:38:24
Mat Armstrong MK2
Рет қаралды 18 МЛН
Smart Sigma Kid #funny #sigma
00:14
CRAZY GREAPA
Рет қаралды 90 МЛН
ЛУЧШИЙ ФОКУС + секрет! #shorts
00:12
Роман Magic
Рет қаралды 15 МЛН
2 MAGIC SECRETS @denismagicshow @roman_magic
00:32
MasomkaMagic
Рет қаралды 24 МЛН
Perfect Pitch Challenge? Easy! 🎤😎| Free Fire Official
00:13
Garena Free Fire Global
Рет қаралды 14 МЛН
FULL BUILD - REBUILDING A CRASH DAMAGED RANGE ROVER
2:24:40
Mat Armstrong MK2
Рет қаралды 2,9 МЛН
TRYING TO SELL MY WRECKED ROLLS ROYCE TO THE PRESIDENT OF THE FIA
31:40
Mat Armstrong MK2
Рет қаралды 1,8 МЛН
REBUILDING A WRECKED ASTON MARTIN VANTAGE THEN DRIVING IT 2611 MILES
28:19
REBUILDING THE CHEAPEST RANGE ROVER IN THE UK | PT8
20:31
Mat Armstrong
Рет қаралды 1,6 МЛН
DRIVING MY WRECKED LAMBORGHINI FOR THE FIRST TIME
30:17
Mat Armstrong MK2
Рет қаралды 1,4 МЛН
I FIXED THE MYSTERY PROBLEM WITH MY CHEAP RANGE ROVER
12:50
Mat Armstrong MK2
Рет қаралды 787 М.
I BOUGHT A WRECKED ASTON MARTIN DB12 THEN REBUILT IT IN 24 HOURS
1:00:18
Mat Armstrong
Рет қаралды 3,8 МЛН
THE LAMBORGHINI I GAVE MY GIRLFRIEND IS UNDRIVEABLE
45:14
Mat Armstrong MK2
Рет қаралды 3 МЛН
REBUILDING A PORSCHE 911 GT3 TO BE FASTER THAN A LAMBORGHINI
28:59
Mat Armstrong
Рет қаралды 3,7 МЛН
Smart Sigma Kid #funny #sigma
00:14
CRAZY GREAPA
Рет қаралды 90 МЛН