REBUILDING AN EX RENTAL FERRARI | PT1

[@zollotech]

Love that you show building up the engine step by step. Not a lot of people show all the detail. Appreciate it and looking forward to the rest.

[@HIROZAX]

welcome zollo

[@ethanch3011]

Holy moly ZOLLO!!!!

[@diyhard666]

Top commenter on this channel

[@q3znw6j88aywnwy]

Rob Dahm's engine build videos are great too

[@houmamal-ahmad9984]

I would strongly recommend you watching @m539restorations he rebuilds bmws only but my god he shows you everything including torque specs

[@msej10]

Your dad’s knowledge and time is forever proving to be invaluable. He is truly a legend and I hope he can see how much your fan base love him around 👌🏼

[@pedromacd]

He's great isn't he. A big part of the channel.

[@jacksmale7036]

Im only here for his laugh if im honest.

[@Gus0898uk]

It's good to see a son and his father getting on so well together, on air anyway. :)

[@michaellau2544]

He’s such a sweet guy too!😊

[@ZiaRaheman-kd7vu]

Man i was just wondering that..I mean any car he knows it like he is some car magician!!! What a cool dad

[@MoltenKing992]

21:52 Hey mat, ring gaps are calculated from the bore size X factor. The factor changes depending the piston. So forged and cast pistons will require less gap a than hyper-eutectic piston. The other thing to consider when determining the factor is how the engine is destined to be used. So N/A street driven engine is different to an engine with boost. If you can’t find the torque specs you require, consider replacing the factory fasteners with new fasteners from ARP. I’ve always used the ARP’s recommend torque spec which they determine by the size of the fastener.

[@shdws7826]

@matarmstrong

[@mikeey]

@matarmstrong

[@davidhut3670]

@matarmstrong

[@basdenhengst9578]

That’s a lot of fancy words

[@rehannathuplods]

@matarmstrong

[@giuseppelamberti9087]

The relationship you have with your dad is amazing. What amazing memories you two are building

[@ZimamIssa]

😢😮😢😢😅😮😂😮

[@ZimamIssa]

😮😢😢

[@ZimamIssa]

😢😅😮

[@ZimamIssa]

😮😢😢😢😢❤

[@ZimamIssa]

❤😂😮😮😂😮😂😢😅😮😂😅😮😢😢😮🎉😂😮🎉

[@marko-vucic]

You are one of the few KZbinrs that actually makes a video rebuilding a car and doesn't spend half the video making/eating a sandwich, talking nonsense while cleaning the car for 5 min of the video, etc. Thank you for the top quality content!!

[@harveyadams9654]

Aka goonsquad 😂

[@TheRobman]

​@@harveyadams9654lol, was just gonna say the same thing

[@mclarksays]

samcrac… lsc is getting there….

[@yoga.adi3]

im skipping their videos until they literally fixing something

[@excalibur2038]

Depends if i like the people or not, sometimes thats chill

[@Njerukinyua]

This man is rebuilding a 60K+ pound vehicle & Engine, records it, has time to edit the videos, updates the website and also designs and makes the merch! How much time do you have in a day brother!!!! It's amazing and you deserve all good things coming your way.

[@granthoover9045]

Absolutely! It would be so tempting to slow the pace and relax a bit once finding success but Mat keeps his foot on the gas! Crazy high quality given how fast he releases

[@JR37000]

He will have loads of people working for him - but still top work.

[@dimaaftaritet]

Well he has loads of people working for him, most likely he doesn’t do much more than film the videos and do the actual work

[@xander8623]

@@dimaaftaritethe edits the vids as well

[@piercezhang8153]

Well he makes more money by uploading these videos so that's definitely a priority, the rebuilding is just extra which I'm sure he doesn't care whether it's successful or not while filming it.

[@jamesbencke3319]

Great to see Hannah and your Dad. You all make an awesome crew and contribute to your success ! Give Kevin a scratch from all of us in Tucson!

[@AmjidMajeed]

I never had a meaningful relationship with my late Dad. He passed away back in '06 and I miss him every single day. But watching you and your Dad working together brought back old memories with mine. I know this gets mentioned quite a lot- and too rightly it should, your Dad is an integral and important part of your channel and one of the main reasons why I watch you both work on some amazing dream cars of mine and why I subscribe to your channel. He is truly amazing, Mat. Please give him a huge hug from me- and anyone else in my position. Can't wait to see F430 completed. Keep up the grand work.

[@philtucker1224]

I lost my dad in ‘84 but when so much love is involved we still try to make them proud of us.🙏

[@tonyarmstrong2987]

Thanks for supporting us . Regards Mats dad😂

[@philtucker1224]

@@tonyarmstrong2987 your a diamond mate 👍

[@chrisbartlett6022]

I love the fact that you take time to explain stuff so well, for someone who might not understand vehicles and engines overly well. There is not a great NEED for folks to understand things now as so much is just disposable or all done by the workshop, however even if you are never going to use a spanner it is good to have a basic understanding of how things work. Cracking channel great work, a true inspiration. Well done to ALL of you.

[@less-sidemen]

One of the reasons Mat stands out from the rest is that he's learning and teaching us along the way. Huge respect to you.

[@NewsScapeChannel]

Why isn't a big tool brand already sponsoring him?

[@TheHannukahZombie]

I wouldn’t listen to anything he’s said or emulate what he’s done to rebuild this engine. He did multiple things wrong and that engine will not last. Even basic knowledge would have stopped the mistakes he made.

[@less-sidemen]

@@TheHannukahZombie You can't be perfect mate. He made mistakes, he learnt from it :)

[@deadcertainty4528]

Matt.....Use your spare engine to check out what those cylinder head bolts are torqued to. It won't be perfect, but it should be pretty close if you can't get the official specs.

[@Vellinga94]

Big brain 👌🏼

[@MarcLem46]

Wasn't the original motor in pieces already?

[@rajayusuf3288]

​@@MarcLem46yes

[@StarekS]

he dismantled both of them in the first video :/

[@georgeforeman9366]

Yess this. Matt go back to the europarts place and take a torque reader/tester with you and see if u find similar readings

[@kvijuuu]

I watched all the videos about RS6 (and cant wait for an update). Now I am on the F430 and I have to say, this is so nice to watch.... you working with your dad, the passion, the smiles, the approach towards any kind of problem. Thats an example to everybody. I can imagine that in normal garage it is just about nerves, swearing and pressure but this is genuinely pleasant to watch. Big thumbs up and keep up the good work :) cheers from Slovakia

[@mincraftgeek123]

Love the build Mat. Just one thing I noticed from the video (you mightve not shown it), make sure that when you are honing the cylinders, that you move up and down quickly with the tool that your dad was using. You want adequate cross-hatching so that when you install the pistons, the piston rings grab against the wall adequately and give you the proper compression and no oil goes into combustion chamber during operation. Cheers.

[@sebastians1511]

good call.

[@cweednz]

The cross hatching allows the oil to form a film, yeah? If perfectly smooth, the oil is unable to cling to the cylinder wall(?).

[@mincraftgeek123]

​@@cweednzYeah thats correct. It is so that the piston rings seat against the wall properly and seal the combustion chamber from the crank case.

[@DrJo-zf2yc]

The scratches made with the honingtool have to have an about 45 degree angle, so the pistonrings can shear off the oil from the zylinderwalls without the danger of grabbing into the zylinderwall itself.

[@Max-ik9qb]

Typically when reusing valve springs, valves, keepers, rockers they ALL must go back in the place they came out off. Valve guides wear with the valve stem, springs have a seat pressure spec set at the factory, rockers wear a pattern on their valve tips and so on. The cams/ cam caps absolutley need to go back where they came from as they wear a pattern into the head/ lobes. Definetly try not to mix cams from head to head. Best case scenario you get away with it all and worst case you wear down that drivetrain in 10,000 miles or less. I'd be cutting my oil filters apart for next 10k looking for glitter. Hopefully all these details don't come back to bite you in the arse. I would have personally just used the assembled complete heads from the free motor you got and just sent them to a capable machine shop for a cleaning and health ck, maybe valve seals depending on miles/ kms. For ring gap you can copy the gap from your bent con rod/ piston set up. Take the rings off it and insert em into the block you didn't hone. If it's all stock unmodified parts (stock bore) the gap reading should be the same. Ring gaps aren't something that wears with use. As for torque specs on critical things like rods, heads, mains i would absolutely not F around. Pay a hacker to dig into Rarris network if ya have to but do not guess trq specs or sequences on critical parts. While you have the block apart I'd also invest in a proper bore gauge and measure each bore top and bottom to make sure the bores aren't out of spec needing oversized rings. Your dad was moving too slow (up and down) with that hone fyi. A compression check of all cylinders before firing up the engine should tell you how well you put the thing back together. Best of luck! and i'll have the popcorn out watching this build unfold! edit: forgot to mention the obvious but absolutley do not forget to put the straighest of straight edges in your arsenal on both heads and block sealing surfaces before bolting em together. use a flash light from one side and look for ANY light coming through the other. you have no clue why that engine was taken apart and if the track guys overheated it aluminum heads tend to warp if you even look at them the wrong way.

[@azrilrapaiee]

haha🤣

[@thomaswirgau1152]

I was watching the video think the same things, great comment and he needs to see it 😭.

[@Wayne55231]

You pretty much said it all. The hardware all being put back in their orginal place where they wore against each other, honing the cylinders, ring gap, skimming the head, compression test, precise measurements, torque specs etc. This isnt a 50cc moped, and even then I would still do the same on any engine no matter cheap or expensive it was.

[@MagnumMuscle1000]

That engine most likely will not hold together for long.

[@Werkmeister2121]

They also didn’t lap the valves..

[@Slayer-eu4xn]

Matts dad laughs like a maniac when he finds something damaged😂 i love it

[@nigelbabb2516]

Lol ! Lol ! 😂😂

[@nikailiam]

Love that guy! For some reason I feel like this is another give away car.. this time for his dad as a big thank you for all he is doing!

[@Slayer-eu4xn]

@@nikailiam It's a ferrari and all but doesn't seem like his dads type , I could be wrong tho

[@qwertyasf509]

@@Slayer-eu4xnu where wrong u mong

[@FakeBoyz21]

He did end up giving it to his dad 🎉

[@daevidcrawley6936]

Couldn't agree more, with all the comments about how involving, detailed and passionate your work is. Keep adding the detailed explanations, diagrams and video inserts....this is what sets you apart from the rest.... and the humour. Keep it up Mat ❤️😀

[@thorsrensen3162]

I used to feel pity for the people with those engine problems on supercars, but now it just irritates me how poor design of Ferrari and Lamborghini engines causes those expensive repairs.

[@alancooper7062]

As someone else mentioned , when honing the cylinder bores you need to effect cross hatching !!

[@jairivasmen]

What a great energy you two give off working together. You made my day. Bloody hell I miss my dad

[@lopezlizimo1236]

Plus one my fren

[@stevee8920]

I love the relationship between you and your dad he seems to be having the time of his life. He obviously has a lot of knowledge and you are building a family brand. Just ordered your new hat (just happy to support the channel) this is another epic build and one I’m looking forward to following along with updates on the Lamborghini and the future of the M5. Great content as always 👍🇬🇧

[@breakupgoogle]

im so glad u have the simple explainers and diagrams for the folks that dont know the mechanics of cars. little bits at a time and everyone learns.

[@stevegoodwin6954]

You have inspired me to repair stuff on my car that I wouldn't have done in the past, cheers Mat, great to see Hannah, and your Dad..legend.

[@ialaddin]

I think your dad needs more recognition for what he brings to the table.

[@Live-Life-Freely]

It's obvious they have a great loving relationship and to any father that's the best compensation.

[@ferea_896]

Yeah man. Look at the look at his father’s face. He is doing this because he absolutely loves it and even more to be doing it with his son. He is 100% not doing it to have his own KZbin channel. This fucking new generation. Finding problems where there are none. And always seeing things where there aren’t none to be seen. Back before you guys we used to have relationships with our fathers and family. That didn’t require validation 24/7 on social media to prove to others that we had them. The people that mattered knew how much they meant to us and vice versa. It had nothing to do with making meaningless comments on video or pictures w long texts to make ourselves feel better because we probably forgot someone “important to you” birthday or didn’t bother to call or visit him. Back then we visited. Made a point to call. To spend time with them. And that’s exactly what Matt is doing.

[@testval]

@@ferea_896 bro u dont need to make it about being a generational problem. 🤣🤣 nothing wrong with just saying you appreciate your family once in a while, which im sure he does just not on camera

[@technology_pro]

He seems pretty conservative so there's that.Glad to see dad and son doing a project.

[@markcastro78]

Spoiler alert...!

[@ryuta_ok]

I just recently discovered this channel and I gonna say, it has the perfect balance of the build being detailed and the goofing around with people. Great work mat, this is quality content!!

[@anrogrootboom1648]

Im all the way from South Africa. I love how you used the Amapiano beat in the episode. Amapiano is a music genre from South Africa 🇿🇦

[@marepreneur]

Finally the second video with the Ferrariiiiii🎉🎉🎉

[@ericcrawford326]

You can’t just hone the cylinders. You have to crosshatch the cylinders with either a hone or a glaze breaker ball hone. If you don’t the rings will not seat properly. The car is looking good and nice job on the valves.

[@daddy5225]

The cross hatch is also where the oil sits to lubricate the cylinder walls

[@Bartleby982]

exactly! hey ruined the engine! he hammered with STEELE on the Valve-heads.. next failure! But it is KZbin.... there 99% people with no idea what they do

[@Jonathan_Doe_]

@@Bartleby982 Yep, those heads will hairline crack long term now.

[@adamsmedley4033]

Those valve stem seals will leak over time too, seal protectors literally come in the box. Gonna be a lot of blue smoke out the exhaust.

[@Tileman69]

I wonder if they washed the block again after honing?

[@andrewwilkinson8250]

I arrived here with serious mental health ending it all thoughts…thanks guys for sharing your warmth it’s helping me round the curve..

[@JDM_Cars..]

I love how your dad explains stuff in such depth yet so simple!

[@harpalbansal2457]

As you're using different conrods pistons and crankshaft, you should get this balanced before you assemble it together!

[@albar1883]

Great to see you, Hannah, your mates and your dad at FoS on Friday. I really enjoy your teams builds and channel but didn’t want to interrupt your day to say so as you were off duty. All I can say is when you and your group were approach you were all very humble and friendly which was super to see. Not up yourselves at all so what you see on the channel is backed up by what you get in reality. All credit and here’s to your continued success.

[@darkiee69]

Mat, don't bin the "bad" crank, it can be reground and use with thicker bearings. As long as it's straight it's good. Cylinders should have a 45° crosshatch honed into them, not be nice and smooth.

[@toyotabob7535]

Agreed, also make sure the rear flange on those 2 cranks are exactly the same from automatic to manual. The diameter and depth of the counter bore and bolt holes. It would be a shame if the stickshift flywheel and/or transmission doesn't fit after the motor is complete.

[@ClassicSam.]

@@toyotabob7535the Auto in a Ferrari is a manual gearbox with an external electro hydraulic selector unit.

[@Skurvster]

Let’s hope it doesn’t smoke

[@darkiee69]

@@thomastolster3934 BS! Original sleeves have a cross hatch pattern in them. And I've seen worse cranks that that being saved.

[@darkiee69]

@@Skurvster I would've measured the cylinders for roundness, size and "chimneying" before I put it together. It might be so worn that they have to do oversize piston rings.

[@siddharthsehgal8322]

I swear to god mat does not know how to disappoint. The moment he drops a video makes my day. I hope he has all the success he deserves it. God bless you brother stay strong.

[@alexlashman4279]

You really have hit KZbin gold. Great content, well edited, well presented and just the right length.

[@BLAC_WORX]

Probably a good idea to have a machine shop check the heads and block deck for flatness at the very least.

[@pomidor773]

Yea and it looks like they are going to keep the original head studs too, not sure about ferrari but in general they stretch and need to replaced with every rebuild

[@BLAC_WORX]

@@pomidor773 that is usually the case with factory bolts but studs are usually reusable.. but yes I agree the head and main studs should be looked into. I love his rebuilds but the engine work they do makes me uneasy haha

[@cjsawinski]

Yup… although I do t think it’s the end of the world with an all aluminum engine (aluminum block mated to aluminum heads)… I would for sure do it anyways and have the machinist take all the way down to the service limit to get a little extra compression. Decking is for sure a must if you have an iron block with aluminum heads…

[@bigdundee12345]

No corrosion, no head blown, they would have checked with a straight edge, whats the big deal?

[@BLAC_WORX]

@@bigdundee12345 tell me you don’t build motors without telling me you don’t build motors…

[@NIcad7]

I have the Ferrari workshop manual for the gearbox. I can probably try to get the engine manual too 👍👍 I just had to rebuild my F430 Challenge gearbox if you need any info on that👌

[@sav7978]

I've been watching your videos since yesterday, I watched the murci and 720 build. I love how you don't just throw money to parts but instead you go for ideal but low cost parts and that is lovely!

[@tinayeshendlovu2567]

The build that will lead to even more great builds. With this project Mat you gonna be able to restore even greater Ferraris, absolutely love it

[@robstaples6649]

Really pleased to see another video already, well done to Mat and the team for getting this out, I’ve decided to put my money where my mouth is and bought a mystery box from the store. So much crap content on YT sometimes, many “bigger” channels could learn from you.

[@marksmithard7801]

Your Dad has such a friendly understated personality. So knowledgeable and he must be very proud working with you on this journey

[@tgvettes]

Torque is usually based on what size fasteners is used. If Ferrari won't give torque specs maybe check with ARP fasteners what is recommended torque specs on specific fasteners they might be able to help you!

[@superbrit3845]

This channel goes from strength to strength. Only a matter of time now before Mat is fronting a TV motoring show 👍👍

[@jamesulbot]

Wheeler dealers with mike brewer. He's the new edd china 😀

[@BravoNovemberAviation]

i hope not TV shows are all put on this is real and thats what we all love about it

[@gregorysandilands1153]

Matt. I would love to work on those cars. I’m from South Africa and now in the uk and seeing this reminds me of my brothers and I fixing and replacing our own cars engines. Keep up the content mate. Love it.

[@gar24407]

Here is a trick for the future. Get an electronic torque wrench and write down the loosening torque of the bolts. In theory it takes about 95% of the torque to loosen than to tighten under ideal conditions (bolts that are not corroded or seized).

[@geordieboy77]

does that account for bolt stretch?

[@is6781]

Trick for the future is dont overpay by 100% for a car

[@per.kallberg]

@@geordieboy77yes, stretch is a consequence of the torque applied. You pull to torque and that is then including the stretch.

[@kcnmsepognln]

I was taught never to use a torque wrench to loosen bolts, as it throws the wrench out of spec. Are electronic wrenches protected against this?

[@TheHenzen]

​​@@kcnmsepognlnext time someone tells you this, ask them how they thight a bolt with a left thread... you should probably not loosen a bolt that has been tightened to let's say 200 Nm with a torque wrench set to 50Nm. It probably has to do with what kind of torque wrench you work. Some huse a spring, that presses a square part (like a cube) against another flat surface inside the handle. Think of it like when you hold two squares of wood and clamp another one between them, you can now turn them without them falling apart. As long as the force of the two outer blocks pressing on the center block is higher than the resistance that would be applied to the center one, it won't fall out. Thats what makes the clicking noise in a torque wrench, its when the torque is higher than the pressure applied by the spring on the square part, and the square part flips/ tips over. Excessive load on the flipping square surely isn't the best thing, but if you set the torque wremch high enough the pressure of the spring will be higher and as the torque and it wont flip/ tilt. Probably not the best explaining but I tried :)

[@postRMO]

there is not a single second in your videos that's filling time. Its perfect pacing and high quality. Im so happy to see this. Manual F430 is the dream, and the Leciester accent makes me feel home.

[@gerallison]

Man , you are the youtuber that always put a smile on my face, love your energy, the work you put with your mates, the amazing relationship with your dad. Keep the good work.

[@trade_of_the_day]

as a South African I'm proud to hear amaPiano on a British KZbin channel as big as @Mat's. Love the 430 build n the second engine is definitely making things easier.

[@shrine.productions]

made me so happy yoh

[@dark_sky5098]

i thought i was the only one who noticed

[@odirilemorolo]

Amapiano to the world

[@mosesegesa5456]

Hi Mat ,i have been watching many videos from you but i have to say, this is the best video that i have ever watched... It brings a lot of memories of me doing the engine jobs with my dad, most especially cleaning the valves... I am so happy to watch such videos most especially since i stay far away from my dad, . He is in Uganda and i am in Europe .. Thanks so much fi dat ,,, God bless u with your work..

[@TheSnowyStormy]

Mat never gives up no matter how difficult it is. I wish to be like him

[@borismkhwanazi583]

Mat can't wait South Africa is watching

[@NolzadCS]

With money I wouldn't give up too. I just throw money at it, and my time, which, I would have enough if I was Matt, doing those videos...

[@sciencebob8485]

This guy is top g

[@lergi147]

What, british?

[@mistercrab4494]

And brilliant and cool dad

[@badboyalan]

Mat your dad is amazing in what he does! And I love the realationship you both have!!❤

[@alanpotter3146]

This tube gets better and better,and its lovely that you do it with your dad,it brings back lovely memories for me,when i would rebuild engines with my Dad,and do the old valve grinding.Keep up the great work.

[@CJMediaOfficial]

I love all this engine work! You and your dad work so well together 😁

[@leroyalmeida2258]

CJAYYYYYYYYYYYY.. which is your next bike build project ?? the RSV4 sounds brutal mate

[@FatHead1979]

Yup, Matt's dad is amazing.

[@CJMediaOfficial]

@@leroyalmeida2258 lllllleeeeeeeerooooyallllll! I've got a few projects already hidden in the garage 😎

[@jayehanna6719]

Honestly so great seeing your dad and partner there with you all the way, what a great life you’ve worked hard for 😊

[@alastairwoodford3575]

I have very little car mechanics experience but I wanted to learn more so a few years afp I took a three cylinder head out a Peugeot, skimmed it, replaced the seals and grinded the valve seats and put it back together. Learnt a heck of a lot about how engines worked. Replacing the collets on the valve springs was a total pain.

[@2001_SpaceOddity]

I love all the detail you go into and the diagrams/videos. Nothing better than learning and being entertained at the same time. Fan from NY, USA

[@juliocaubin8091]

Interesante, divertido, lleno de buenas vibraciones a pesar de todo el trabajo y del increíble gasto en repuestos. Deseando ver ya el siguiente episodio. Mucha suerte Matt.

[@JCB_KFCman56]

Bro ur dad is a true legend, me and my dad are building and fpv gs Fg 2010 and he puts the same time in and Ik how lucky we are to have dads like this. And I’m half watching it videos for the knowledge of engines and car parts

[@mattgretton2925]

Great episode, amazing pace seeing progression!! Your dad’s knowledge is on point. Respect to all the team great channel guys.

[@rustyfmj2388]

The F430 has always been on my list of unobtainable dream cars, so nice to see you make videos about it

[@mikerf900]

Great video as usual, brilliant the way you explain the simple engineering and engine stuff, rather than just expecting everyone to understand...as some people wouldn't...👍 keep up the hard work..🔧⚙️

[@Mattie_LIGHT]

Mat, your channel is quickly becoming my favorite car rebuilding channel on YT. Love the content, appreciate the hard work you and your team do, keep it up!

[@Marcus_Ramour]

This is shaping up to be another awesome build series...by far and away the best motoring channel on any platform including TV! Well done Mat

[@jaytestepaniuk4489]

mat armstrong watching your video's have been alot of joy and iv been looking for a side project to keep me busy since my daughter pass away from rare type of cancer. Im machinist by trade and You have inspired me to start looking into exotic cars that iv only dreamed about owning. keep up the great work and cant wait for the next video.

[@DrBeaver]

I love seeing Matt and his Dad working together 👍

[@pjotrrenes7442]

Yeah finally a Ferrari!😍 I'm so glad there's a new rebuilding video online! I've tried to watch other channels looked similar but your videos are so much more fun to watch!! Greetings from Holland and keep us posted!! (sorry for the poor english writing)

[@Gobbbbb]

A bot stole your comment and now it's a top comment, Mat replied to it saying "Awesome! Thank you!" Also your English is completely fine, only a few minor grammatical mistakes, don't apologise!

[@___z__a__m___2038]

You know what brother !! Im a motor mechanical student studying in Japan and your explanations about the engine and others hits in my head straight;;; im gonna stop studying and watch your videos no matter what ❤

[@D-Man-m31]

Love the way Mat and his dad help each other with every rebuild 🙌🏾🙌🏾

[@cs0654]

Hey Matt, awesome to see you and your Dad in the garage together Mate. Living vicariously through the two of you, brings back memories of my own!

[@eayajf]

Is there a video about your dad and why he’s so knowledgeable? He’s like an Engine Buddha Would love to here more about how he has all that know how in his cranium

[@MrRobertshaw100]

Your dad is an absolute legend. Watching you both together is magical. It does make me miss my dad who passed away recently. 😢 Keep the great videos coming, you are nailing it Matt. 👌

[@Gameedits82]

sorry man

[@MrRobertshaw100]

@@Gameedits82 thanks mate. 👍👍

[@Gameedits82]

N prbl

[@Gameedits82]

@@MrRobertshaw100 u are welcome

[@MFArNAKAMSHENGU]

You know it's a good day when mat uploads a video 💯❤️

[@jimhatfield5381]

BUMPER- Looks mostly like a fiberglass bumper. You can make a f.b. be whatever you want. It can be fixed easily IF you have worked with f.g. before I like how you cleaned the car inside and out. Now it sparkles and that is a visual you can see everyday to inspire you to fix the car during troubled times when you think you made a mistake and should not have bought the car. My wife loved the video of how the crankshaft and connecting rods work. "A garage without a Porsche is just a dark hole" Walter Rohrl - Porsche Development

[@ackemmccalla5413]

The editing skills on your videos are next level 🔥🔥💯💯

[@KagisoTBGee]

I loved the music choice. Heard some Amapiano influenced sound there and was thoroughly pleased.

[@NkanyisoK]

You just make it all look easy Mat 😮 I only subscribed two weeks ago and I’m hooked! Much love from 🇿🇦

[@kay_bird]

nazo ke nkab'yami

[@hustleking2732]

Did you hear the amapiano

[@laapulsford]

Matt, it's important that before you fit the cylinder heads you fit the spark plugs, then turn the heads upside down and fill the bowl the valve heads sit in and fill them up with petrol (not water). If the valves are seated properly and are sealing, the petrol won't leak. If the petrol instantly leaks away, the valve seating is poor and you need to regrind the valve seats. If it was me, I would get a professional engineering company to do this work.. Badly seating valves could rob you of 80bhp easily. Work smart. By the way, the tin with the grinding paste in is double ended. Course one end and fine the other. You need to use both compounds - course first and next fine.

[@Itsfranklyfrank]

Hey just as a note before you slap the engine back together. After using the hone on the cylinder walls it’s a good idea to run a dingle Berry hone through it (that’s what we call it, kind of looks like a bottle brush) it’ll give you the cross hatch you need on the cylinder walls. Super smooth is not the desired effect, I’m no professional. So take this with a grain of salt 👍🏼

[@rhyswatson9976]

You need to deglaze the bores

[@RaviAudhan]

Matt i think the fine scratches in the cylinder is to be there to hold oil to lube the rings

[@daddy5225]

Only if they're the 45 degree cross-hatching. If it's vertical scoring/scuffing, then it's bore wear.

[@IntegraDIY]

15:24 never wire wheel valve stems. only soak in strong solvent over night to loosen up carbon, and thoroughly wipe off gunk

[@exoticsinafrica1789]

Hey Mat, much love from South Africa. Your channel is amazing and the content is honestly the best on KZbin. You deserve 10million plus subscribers 🎉

[@FX-TITAN]

Yo' do you know the song that stats at 09:30?

[@shaff8308]

Hos ya

[@taxiculturesa]

​@@FX-TITANIm also here for that reason😂😂🔥

[@tomasabriata8362]

Love how mat came from cool but cheap cars to really expensive stuff wow ❤️

[@thisisanno]

You could have already bought am F430 in good nick for the money this has already cost. Granted, it wouldn't be a manual but one of the main reasons there aren't many manuals is because the paddle shift is so frigging amazing. I can see it ending up in the 90's. Good luck though, and of course it wouldn't be a project if it was in one piece!😊

[@Techno_VFX]

Mat’s video are so well done, it’s a blessing to watch these every week

[@dumbfloppa]

Yeah!

[@SeeLifeBro]

You're so lucky to have this time with your Dad. I would give anything for times like this with my pops, but I'll have to wait for the next life for that. Please cherish these times, life is short. Bless you guy's...🙏

[@jayfourkay1710]

Waiting for Mat to finish this build and earn his "Cease and Desist" Ferrari letter XD

[@matmul4850]

Underrated comment 😂😂

[@chrisparky]

Agree. He should have stuck to Porsche and McClaren

[@britneyfreek]

noticed how there’s the ferrari logo in your face between cuts? liked that.

[@Prof.Polymath]

I’ll print the brackets for you Matt ! Let me know what you need. 👍🏼 as for the torque specs, find them out from Maserati or another engine with similar spec and power etc. they’ll be be similar so that’ll be fine. 👍🏼

[@BackYardBoyz]

WOW! That detail job really brought life back into this Rarri!

[@robertoschols3599]

Yo Mat, I am fairly sure that you need to cross hatch the cilinders after honing them!

[@keithsbitsandpieces]

Honing is what does the crosshatching

[@daddy5225]

If it had nikasil plated liners, you need to use a diamond hone tool, but it's not recommended unless it's been freshly plated as the plating is very thin 0.05mm

[@robertoschols3599]

Hi there thx for the reply, isn’t also so that Mat also first needed to measure the diameter and than twice at an angle of 90 degrees to see if the cilinder isn’t oval and also horizontal to see if the top-end and bottom-end isn’t worn out too much and is within specs given by Ferrari?

[@avlmotorsport9280]

If its Alusil, you defintley dont use honing stones on it, to do a proper job youd use a profilometer and honing paste.....also checking bore dia, taper and out of round are basics,......im hoping you did that right?..........hopefully the valve train components went back in order too, because to me....looks like it was all chucked in a box and mixed up, then just installed in any order....

[@daddy5225]

@avlmotorsport9280 what are your thoughts on lapping the valves in also. I thought you didn't do that anymore on modern engines, definitely wouldn't on titanium valves. Also, if the seat is too wide you won't get a good seal, therefore affecting the optimum compression.

[@Cornusse]

Mat's video >>> Netflix series

[@benwright_cort63]

Matt, there is a place called ‘sticky plastics’ near Middlesbrough that can make all your interior buttons and panels like new again, a hell of a lot cheaper than replacing them too.

[@edeschanelle]

Great work Matt! Teamwork with your Dad = Big Respect 👊🏽

[@bitteprivat9197]

@Mat Armstrong The damage in your wheel arches is not rust as you mentioned. It's oxidation (aluminium can rust) so basically the same thing it will just not eat the metal away.

[@bjarnethem]

the metal will be eaten away. just a matter of time.

[@dubvalver]

i just repaired this type of damage on my e46 m3 mirrors. came out really nice after a bit of sanding.

[@lewiswilson5511]

Wow what a guy! What a lovely gesture ❤

[@salto1994]

super excited for this build. excited to have your dad on the build too :)

[@nextechsolutions5955]

I’m pretty sure the cylinders are supposed to have light scratches. They’re called cross-hatching and they ensure that some oil sticks to the cylinder wall to lubricate the cylinder rings…cheers.

[@kylemcw8301]

Did you not hear the low key music kick in (lowering the tone) as His Dad was polishing them down!?…. I think they have since worked out….. Your bang on.👍 Is that likely to be a costly mistake?

[@LouFiasco]

It won’t. It’s perfectly fine like this.

[@chrissteel5304]

Nice work Matt - hack for lapping valves! Instead of rolling the stick between your hands (correct method), attach a drill to the end of the valve stem like you would a drill bit, apply some paste to the valve seat and allow the drill to rotate whilst pulling the valve backwards and forwards. I've done this many times and it saves hours - care is still needed.

[@BEARDCultureMusic]

can't wait to see where the pyro fuse is 😄

[@m4son5ee]

£60k for that is daylight robbery! But your worth ethic will double its worth! Smashing it bro! Keep it up!

[@chuck1622]

The only silver lining is the more of a train wreck it is, the more entertaining for viewers, which can equal more views! Although we would all still watch anyway, I know I would🤔. I just hate that this track day place keeps getting away with this stuff. Ratarossa needs to show Matt his money saving techniques. That guy knows every trick in the book to build a Ferrari on the cheap.

[@Lozzman7575]

The money is in the content 😉

[@richieduck67]

Ratarossa got his scud for 50k

[@CrankCyclingChannel]

@@richieduck67that was a category write off though

[@Heartofaloin]

Least it's better than the 100k he paid for the Lambo. Seriously had his pants pulled down and shafted there. Personally I still think 60k was abit much but then again who knows

[@stuarthumphrey6158]

Newbie to the channel. These two Ferrari videos are the first I've watched, and I've really enjoyed them. I can't contribute anything to how to build the engine, but I wish you the best of luck.

[@wampiiroja]

The part of the valves was misplaced, the intake valves are always bigger than the exhaust ones 😉 The volume of burned gases is smaller

[@davyhoogy]

It actually annoys me to know that scummy track day company are still making money 😂 I can't be the only 1 thinking 60k is alot for the state that's in?

[@anthonydenn4345]

When it's 1 of only 1500 ever made, 60 grand ain't looking so bad. I wonder how many of the 1500 manuals are even in the UK.

[@davidbreukers5706]

Yep, even with a free engine its ridiculous. They go for £70k

[@softwaretechnologyengineering]

@@anthonydenn4345 He got a free engine. Thats the only way 60k makes sense. Same as the lambo it was way over priced.

[@anthonydenn4345]

@@softwaretechnologyengineering Maybe he could recondition and sell the bumpers, that would take 10 grand off the price right there 🤣

[@johnnygeorgopoulos4072]

It's really a terrible deal, even with the non running engine he got on the side. The thing is an absolute wreck, and the worst part about it, it needs a full repaint.... forget getting it running, driving, and looking halfway decent..... repainting that thing to how it looked before, or to what that silver 6spd one at 100k looks like, is going to cost EASILY 20k+.....if the body was already all there and straight, that's already 80k.... leaving 20k for everything else (including his and everyone else's time and labor).... I'd personally have just bought the silver one 😬😅 Edit: I'm now less than 3 minutes in listening to what the body parts needed cost.....ugh....I feel terrible for him....he got absolutely raped 😵‍💫 60k 10-20k in just exterior parts(if from Ferrari) 20k-25k for paint That's over the 100k for the silver one, and that's not even running, interior, and anything else needed.....he needs to slow down and research parts prior to pulling the trigger 😅

[@guysim138]

Your dad deserved that. Well done Matt. Bet your both so proud