Mathews Lift 33 Build With MFJJ!!!!

[@Cdrum95]

The camera upgrades are much appreciated! Great video, great angles, and great information.

[@steverichardson3031]

Thanks!

[@michaelbushey2787]

I just bought 2 podium bars. 10 and 8. Amd Thank you so much josh for making them work on both ends. The bolt on one end was too long and my quick disconnect wasnt working. It wasnt butting up to it to make it tight. So i swapped the weight to the other end and boom. Its perfect!! So thank you josh for thinking about everything with the design of them.

[@perryknetter8577]

Thank you for sharing this great information God's Blessings on all your adventures

[@knaveDave]

Finallly… someone shows a clear video of tying a dloop. Thanks man.

[@timbow50]

Ol’ Dudley on nockon archery has a very clear video too. Has a slightly different technique tightening the knots

[@LANCEBARNES13]

Thank you for building one of your bows and doing such a great job explaining your choices of parts and pices :)

[@jons7e]

Great job with a closeup on nocking points and d loop. I've never seen anyone get that great on video and that's certainly helpful for people just getting into working on their bow

[@lamont5050]

Just purchased a Mathews lift 33 in fade to black ... with UV slider. Now the problem is sneaking it in the house...

[@chetmanley2883]

Love the new format of breaking down equipment from you point of view so we all see what you do.

[@juanrodriguez-mu7ko]

Love these videos, I want to learn so much with the bow I have so I can treat myself to a good one like that. Thanks for the vids and the knowledge that you give to us newbie’s. 🙏🏽

[@daddyjosh225]

Can’t wait definitely saving up this summer for a lift

Been shooting my Lift 33 since January, about 500-ish indoor arrows through it now. Holds better, balances better, just plain shoots better than my TRX 34. I’m 61, so I shoot 65#, and my Black Eagle X-impacts at 430 gn hit 286, my fixed blade broadhead hunting sweet spot! My 405 gn version I shoot for TAC launches right at 298, again my sweet spot for outdoor 3D and TAC. With a 3-pin Canyon Pounder, it’s an elk-killing machine!

[@kylemacdonell1450]

Elk killing machine sounds a little premature ! LOL I mean how many elk could you have killed with it already LMFAO

[@WolfinWolvesClothing713]

​@@kylemacdonell1450😂

[@alexsteinlage4900]

Best D-Loop video by far!!! Great work!

[@tylerpogue6037]

Very good video. Great instructions! Thanks for sharing.

[@osagemannn]

Thanks!!! Appreciate all the info you give for free...

[@ArchieRodenbo]

I watch your show everyday at work for 8 hours. Big fan! I'm gonna buy myself the Ultraview UV3 slider soon and upgrade from a HHA optimizer. The Ultraview UV3 XL 4 pin is the best sight on the market and I'm not surprised you and Dan are running it.

[@redbeardracing9255]

Awesome build! Can’t wait to see it in action

[@royhoglund1322]

Nice build! Looking forward to the tuning video.

[@mikeftball44]

Just got my first flagship bow. Spent three house shooting them all. I’m 29” 70lbs, Mathew’s was great other then the draw cycle felt like it had sand in it. Hoyt drew the best but felt really top heavy at full draw. Bowtech felt to heavy and landed on the Elit Ethos it felt stable and smooth. Love these builds they help me learn more about setting up mine.

[@WolfinWolvesClothing713]

Love my elite kairos. They did a great job this year.

[@austincave6457]

just got your Stabs in, running the 12 and 8 on both my rx7 and lift, they are awesome stabilizer. I've been testing out many different bars and they will be the ones I'm running this year!! great product

[@BansheeH-ft6qi]

Nice set up. After shooting the lift & alpha x . went with the alpha x 33 in 80 lbs shoots very nice and not to bad to draw at 80

[@yabba5696]

The 33 settles so good for me!

[@davefabian2942]

Great job on filming the the soft knocks and D loop

[@jons7e]

UV needs to come out with a 3 vertical pin cartridge for the UV Slider. The smaller UV3 scope is nice, but it requires a really small peep... I think I was running 3/32, so that's not great in low light.

[@fredsmachinewerks4811]

Great Build very helpful video. Cheers

[@scottsellars6708]

Already excited for this one. I have a lift 33 arriving any day now. 🎉

[@nate_krysl]

Just got mine last week after waiting since the week they came out! Worth every second I waited man! Enjoy it!

[@mikebarriga]

A lot of people have a lift arriving any day now.

[@randymiller899]

Yep any fregin day now🙄

[@jeremyvigil4138]

Dude shits crazy I been watching mad videos about this bow, I put in a raffle for 4 different bows n I freakin won a lift 33. Crazy shit!!

[@TheFootballer21]

Waiting for the new side mount to be on the website!

[@Joeyplastics]

Hey Josh, another great video. Thank you. I just started working on my own after 34 years of shooting. Could you please do a video on how adjusting string, Bus, or control cables affect your bow tune, ATA and brace height? There are too many varying opinions on the Internet. Thanks again. I have learned a lot from you so far. Keep the videos coming.

[@urbanhillbilly423]

Amazing shooting with a lift 33

[@davidgreer9567]

Thanks for the video. I like the wrist sling with the stabilizer attachment. If I had one request, it's the camera person needs to focus on close so we can actually see what you're doing. There was some of that on this video, so definitely an improvements but are still missing a lot and I assume one of the reasons for the video is to help your viewers. Thanks again for sharing good luck with new bow.

[@goldtip34]

Looks good. 👍

[@gone4days956]

Last week I went to my local archery shop fully expecting to buy a Lift 33. After shooting a few bows I left with a Phase 4 29.

[@ronaldirvineII]

Heck yeah been waiting for this vidja

Love my Total Peep grip and peep…in fact, I bought them from you…

[@krisaunedi4920]

Josh the only reason that I gave you a thumbs up on this vlog is that I have full respect for you as a person and the knowledge you have in the bow industry where I think that a lot of more people should take notes and listen and learn what you have to say and pretty much it's all good information and true. But again Josh what is it that you find so fascinating about Mathews bows because you know that there are many other brands out there that are just as good as Mathews is but at the end of the day it doesn't matter what anyone else says it's what makes you happy and that's all that matters. Keep up the great work Josh 👍

[@coltonheuker1497]

Simple, they’re popular and get views. I’m sure they shoot well too.

[@Orr_s]

He did always shoot Bowtech, and even custom frankensteined a a Bowtech couple yrs back to get what he wanted. I just wish Mathews could do some tuning adjustments like the Bowtechs. Because i hear people say the cables on the Bowtechs dont last at all from factory. But i also hear people saying they arent very happy with the bowtech core SS…even tho the specs seem really good. Although Tim went with the core SS coming from the Hoyt Alpha X

[@brockdrenth2772]

Just heard Athens Archery has shutdown. My understanding is Bowtech filed a lawsuit against them about their tuning system, which you mentioned might happen in one of your videos. Hopefully, they open again but it sounds like they're done for good.

[@philgiuffre6390]

This is great. One question I had was where the bow square is aligning to for the bottom soft knot? My last build I tried to center the arrow on the Berger hole, but what is best practice?

[@jpjr6757]

*****Josh****** Do a video please where you show how to get the peep to line up perfectly? I know you twist the string but always worry I do too many. Or should I do the top vs the bottom. I'd appreciate it. Thanks.

[@ryansullivan9413]

any news on if they are going to fix the ultra view sight for leftys?

[@kyleangelini5146]

What’s wrong with the lefty’s

[@ryansullivan9413]

@@kyleangelini5146 basically every selling point of this sight is ruined for leftys. They just decided to flip everything upside down. Making the ergonomics actually worse than most other sights

[@richardgustin874]

Tried to order one of the grips but not available in left handed version.

[@chrississon2646]

Like to try the wrist strap /side mount

[@jeremybatliner4214]

I want to see you do a review & test of Firenock products & arrow builds with his aero concepts

[@zacklewis-ty2er]

Shootdown pro with se2 cam should be high on your test list. I am 30.5" of draw and much prefer it over any of the 33" ata options. Keep in mind if your running a core with the epsilon you need to get a longer launcher travel screw with 2 of their washers to keep launcher from contacting shelf.

[@Jbob37]

When are you going to make a podium bridge lock stabilizer?😉

[@nachorubicon]

When will you have that quick connect offset bar on the website?

[@Fite234]

The funniest thing to me is all the hate on the draw feel. I've not liked Mathews since 2019. The Lift is the first one I'd even consider buying. I guess I like shitty draw cycles 😂. MFJJ is one of the only people doing extensive videos like this that I feel actually gives all brands a chance. Too many brand loyal people getting there no no hole hurt out there because the brand is called on the "bad" stuff. Keep on trucking and hurting feeling @PodiumArcher . Some of us enjoy it.

[@andrewtalamas]

I hope you could chime in. Ive been to several bow shops and everyone says it’s shooting bullet holes with fletched arrows . But when i go to the range i have a consistent tail right at 20 yds. What could it be. 60lbs 27 inch draw length 28 carbon to carbon. 415 gr with 125 tip. 350 spine. Matthew vertix. I always thought paper was final tell for true flight. But now im not so sure down range it doesn’t look like it.

[@michaelsvenson2456]

Insanelly great shop, just like it should be, to bad it's not in Sweden 😊😏

[@coltona1561]

Would it make sense to have it shorter like you are talking about or a little longer to get the weight you’re trying to achieve. Example 440 gr vs 460gr

[@Thecrockettgroup]

Any update on when the total peep 0° will be back in stock?

[@jimm9992]

What center serving and thickness are you using with the Halo nocks? my factory lift is too thick for the Halos. Thanks!

[@Footballcray15]

Nothing is smoother than a Hoyt rx ulta. in my opinion!

[@dennisholm3565]

Offset bracket with 10 degree downward offset??

[@dansmith8933]

I use my original limb legs on my lift. They fit.

[@joshuadavis5937]

They say they want fix

[@Boron64]

Question: Do you hunt with a Mohawk slit cut in ur hat to establish dominance and estrus lol

[@curtmorgan2539]

Does the grub fit a phase 4?

[@mulliganjack]

Why do you use a wrist strap? Doesn’t it add torque or is it loose?

[@g-man2228]

Yes….👊🏻

[@colerichardson7435]

Are you going to do a hoyt build?

[@LANDONNELSON_20]

Who did you end up giving the bowtech to since it was going to cost me $2,000 to come up there?

[@Jbob37]

Sasqutach killer 101!!!

[@BO55429]

I cannot seem to find the QD offset bar

[@skoolynugenator1802]

Drew back the 29.5 and it felt like Mathew’s has gone backwards with their draw. It was rough.

[@KonstantinMazila]

ждем !!!!!! 😉

[@davidkirkland8756]

Hey man I’m about to do a limb change for the first time on my wife’s halon x. Any tips for me? And do you have any 26.5 mods for it?

[@keithostafie6507]

Love your videos. Just noticing your unboxing camera way to close. Other that that your 👍👍MFJJ.

[@parkerchristian229]

What spine would you recommend for a ss34 with a 31 inch draw, 70ish pounds, and a 29.5inch arrow with 170 grains of point weight? Specifically with victory rip shafts.

[@elkoholic9063]

Standard Rip, 60g shock insert, 100g point. 160g total up front is 300 spine

[@WolfinWolvesClothing713]

Look on the victory website. 🤦

[@scottsellars6708]

I want that Total peep grip 0 degree.

[@robertparks634]

There you go simplifying archery. It's supposed to be expensive and complicated. 😂

[@curtisjenkins1119]

I just put your 15" stabilizer with your off-center mount on my 33 alpha x - mint

[@louiecooper1939]

Any buddy have any experience putting a lowpro quiver on a vxr or vertix.

[@WolfinWolvesClothing713]

Will work if you use the integrated rest. I tried with a hamskea on v3x29, and my arrows were against the rest.

[@mikebarriga]

I like how you have a portion of your video that has all of the components shown and talked about one after another. That way I don’t have to scrub through the whole thing looking for what rest you used, for instance. Not a fan of smacking the components against the wood though. 😂

[@heavypedaling1729]

Went to purchase the offset wrist sling, just wanted to verify before ordering that the wrist sling posted on the site is a quick disconnect. The pictures show a threaded stabilizer mount.

[@Big_Bow_Nerd]

I went to buy one as well to try it out. I think that’s the old style that screws in. I don’t believe the quick disconnect one is on the website yet.

[@shawncavanaugh7163]

Also wondering the same... waiting to order.

[@Big_Bow_Nerd]

Hey Shawn, it’s on the website I just seen It.

[@brentbandy3566]

I wish UV would offer a shorter dovetail or a “lite” hard mount. Looks sloppy with the excess sight bar hanging out the back.

[@bigz5262]

Cut it off. It’s just aluminum

[@Taylor.shay75]

I was really confused for first few mins when everyone looked left handed knowing Josh is right.

[@waynehumphrey8910]

After you get all the bows built are you going to be shooting them all at distance not just 5 yards in the man cave I think 50 yard group should be added to all your bow reviews

[@Thedudeabides803]

What does he mean he can’t sell the high end Mathews hunting bow? Which bow?

[@joshwilliams6922]

I don't think they can sell the lifts online only in store because of the high demand

[@WolfinWolvesClothing713]

Mathews are always in store only. It's a contract, and bow shop thing.

[@Luke2002]

That’s exactly what I did put the uv 3 on there double pin

[@toddbolton936]

Why can't you sell the high end hunting bow?

[@ArchersAnonymous-nb4ym]

Mathews and a few others are pro shop only bows. I believe they allow the target bows to be sold online now though.

[@hack.hunter84]

My shop told me my 29.5 would be in March.... MARCH HAS 10 DAYS LEFT!!!

[@slippystevie]

Shop about and hour away from me has “Free MX2 rest with purchase of a Lift.” And RIP TKO elite fletched packs for $99.99. Long story short I left spending but also saving a lot of money 🤣.

[@ArchersAnonymous-nb4ym]

Was it Ben's Great Outdoors?

[@slippystevie]

@@ArchersAnonymous-nb4ym yes it was actually.

[@deansleigh4091]

That's a great deal!

[@smvmfamily2107]

I have a 29.5 lift with the mx2 integrate rest. I got it set up at a shop. I have to turn my cock feather out to the side instead of up. If I put my cock feather up it looks like the inside vane would hit my cable. Any suggestions?

[@jakef1977]

I'm not a hater but I gave the Lift 33 a legitimate chance and it was by far the worst feeling draw I've felt. I shot it at a 29" draw at 70 lbs and I felt 2 distinct humps. One at 25% and one at about 90%. the one at 90% would kick my butt if I had to draw it over and over. Not a fan at all sorry MFJJ, but keep the good stuff coming.🤘

[@ronaldirvineII]

I'm not a hater but this is funniest comment I've ever seen someone drop about the lift 33

[@jakef1977]

@@ronaldirvineII Its only my humble (worthless) opinion . I'm glad you laughed. I know it's all about an "each to your own" when it comes to feel and I never judge anyone by what they shoot. I always say if it works for you, go for it.

[@ronaldirvineII]

@jakef1977 ur words not mine all I said is its the funniest comment I've seen and that's my opinion only and I stated I'm not a hater. Reason I love archery is cuz everyone's setup is different. I just laugh cuz the lift 33 is literally so smooth its shocking the 33 at 80lbs is smoother than any 70lb bow. Thats how smooth and easy it is. So for you to say that makes me assume ur someone who complains about any and everything. And hey don't let it offend u its just my opinion.

[@jakef1977]

@@ronaldirvineII not offended. I just am very picky about what i shoot. Cheers 🍻

[@ronaldirvineII]

@jakef1977 as you should be man. Do what makes you comfortable

[@TruckManThings]

your video is flipped the wrong way, you need to do a 180 degree flip, my dude

[@LANCEBARNES13]

Also aren’t you right handed? All the parts your showing us look left handed ??? lol 😅

[@ivantheterrible7377]

Pretty sure the entire video is mirrored. You’ll notice when he shows the boxes of the parts he’s using everything’s mirrored.

[@Eatforlife87]

I’ve seen you complain about the football clamp that comes with Hamskea arrow rest. Have you ever tried something like kzbin.info/www/bejne/oKGZe3-un86orqcsi=_Q2lExQEtJlUshEE. Was very curious about your thought on it.

[@kylebailey8498]

I bet he don’t shoot it on camera

[@jasonnester9514]

The lift is the worst bow mathews ever designed

[@joshuadavis5937]

Y You say that

[@jasonnester9514]

@@joshuadavis5937 cause the cam end of the limbs has wayyyyy to much flex and slop