Matrix 9 MatrixGold Clayoo Emboss

In this video we will look at Clayoo Emboss. This will be an introduction on how to use Clayoo Emboss and look at the commands and how to use them. It is not really on the overall output of the design more to just show the commands and some of the processes in creating an item using the command. We will also look at Clayoo Sculpt to add detail and remove detail to the design in order to make it look better and give more detail to it. Matrix Gold Clayoo Emboss is a really powerful tool and has much to offer in the way of design. There is too much to try to put into one video, but I hope this one will give you the basic understanding. We will dive deeper into it in the future on other features that it offers. I hope you find the video useful and helpful in your designing process. If the video helps you, please think about hitting that subscribe button, tap on like and leave a comment. Thanks so much for watching and taking time out of your very busy day. As always good designing.
If you are just starting out in 3D printing, I would recommend going with one of these printers at a low cost and get familiar with the printing and adding supports and then maybe level up to a faster and higher priced printer. Keep your cost low to start until you become familiar with everything that 3D printing has to offer. Anycubic Printers and resins:
shareasale.com...
discount code: www.shareasale...
Here are some links to some equipment, Printers and other items that might interest you.
Elegoo Saturn 3D printer from Amazon n amzn.to/41CgeDU
Jewelry Casting flasks amzn.to/3tnCQvq
Vacuum Casting Machines from Amazon amzn.to/48b5KxH
Elegoo wash and Cure station amzn.to/47dOOWg
Jewelry tools and supplies amzn.to/3H06zNZ
3D Printers and Resing: amzn.to/3TTclc6
Vacuum Caster Melting Furnace amzn.to/3tOVSeb
Tumbler for castings: amzn.to/3tNBmL6
Other videos that may be useful:
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
• MatrixGold Add a unde...
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
/ @donsjewelrymakingandj...
@donsjewelrymakingandjapantrave
#jewellery #jewelry #jewellerydesign #3drendering #jewelrydesigner #designer #customjewelry #finejewelry #howtomakejewelry #howtodesignjewelry #howto #caddesign ##3dprintingdesign #3dshoftware #howtodesignjewelry #cadtutorials #3dtutorial #howtomakejewelrytutorial #jewelrymakingtools #highfashionjewelry #3dprintingdesign #3dtutorial #jewelrycollection #jewelrybusiness #caddesign
#clayoo #emboss #ClayooEmboss #gemvisiointutoiral #gemvisioinmatrix #gemvsioinjewelry #rhinoceros #freecad #tinkercad #autocad #autocadtutorial #rhinojewerlymaking #gemvisiontutorial #gemvisionmatrix #gemvisionjewelry #rhinoceros3d #tinkercad #autocad #autocadtutorial #jewelry #rhinojewelrysoftware #gemvisionvirtualsummit #matrixgold #transparentbackground #transparent #rhinoceros3d #rhinoceros #rhinojewelrysoftware #rhino #matrix #matrix9 #caddesign #3dprintingdesign #autocad #3dtutorial #3Dmodeling #jewelryguidtoprongthickness #jewelrydesigns #3djewelrytips #3djewlerymodels #fashion #ladiesfashion #ladieswear #matrix9
#matrix
*Disclaimer: This video or video description contains affiliate links. That means that I am awarded a small commission for purchases, at no added cost for you.

[@arabiclearner711]

thanks, Can't wait to see what the other buttons do, especially working with images and depth map, thanks, hope there will be more clayoo videos soon

[@donsjewelrymakingandjapantrave]

Yes agree. I need to put up more of them and will get to them as soon as possible. They will go in the ribbon command content. Eventually I will go through all the commands and sub commands in the command line. Not enough time in the day but will get to them. Hang in there. Appreciate all the support and comments.

[@neeni4999]

I would really really appreciate a tutorial on using images (I make a lot of designs using photographs) I used to use Matrix art however sadly that is no longer.... Please please please are we able to create the same effect using Emboss? Hope this makes sense, cheers :) @@donsjewelrymakingandjapantrave

[@leewilliams3752]

どのビデオよりもわかりやすいです。たくさんのひとがみてくれるといいです

[@donsjewelrymakingandjapantrave]

Arigato, very nice of you. Thaks for your support.

[@cansahinoglu]

Great work.Thanks a lot!

[@donsjewelrymakingandjapantrave]

Thank you too!

[@bhaveshsoni5906]

awesome and informative....

[@donsjewelrymakingandjapantrave]

Thank you. Also thanks for the comment and all your support.

[@asknaltan]

First of all, thank you for this instructional video. I have a question for you. I'm having some issues with Matrix Gold. Especially the surface is also about Gems or Stone cutters. I can't choose it, I can't put it where I want, or it doesn't work at all. Have you experienced the same situation? Matrix 9 works better.

[@donsjewelrymakingandjapantrave]

No, sorry I have not really had any of those issues so far. I have run across some issues with the bypass outside ring rail and the gems in channel commands not working here lately. Matrix 9 was the last of the older Matrix programs to come out. They did pretty much perfect it up to the point where they could. Matrix gold is relatively still a baby. There will be issues that arise just like back in the early Matrix programs, but I guess we will have to see how fast they fix those issues going forward. So far, I am very optimistic with their efforts and speed on which they address them as they come up. Time will tell though. huh. Most of my issues so far have been created by my own mistakes. Forgetting to ungroup or hitting the commands before they are actually ready to accept them stupid stuff like that. I'm so far really happy with the program. I hope things go smoother for you in the future. Let me know if there is any way I can help. Love hearing from you.

[@asknaltan]

@@donsjewelrymakingandjapantrave Thank you. As it is known, MatrixGold v3.2.23025.2001 upgrade has arrived. How to use the Flip command in the Cuve Menu? Did you review?

[@eliasdenitiu9352]

Hello. I do have one more question 😂 what graphics card do you use? Is AMD any good for matrixgold? Is Nvidia better? (can you please give some models for example? ) I can't find any information about this online.

[@donsjewelrymakingandjapantrave]

If you do a search in google for Gemvision Matrix Gold 3.0 system requirements. Gemvision has a page that will explain all that way better than I could. You’ll find system requirements in the ribbon just click on it. Hope that helps.

[@eliasdenitiu9352]

Yeah i know. But it doesent say anything about amd. Also it just says geforce rtx are good but there are around 20 graphics cards rtx. If i send them an email to ask which is better they tell me they can't find my email adress in their clients database.

[@donsjewelrymakingandjapantrave]

@@eliasdenitiu9352 Guess I have to ask. Are you running a licensed copy? Lol they should help you out. Very surprised they won’t answer that simple question. Im not sure really about the and card to tell you the truth. Im running a Nivida GeForce 1660 super. Not really the best for the program I do know that.

[@eliasdenitiu9352]

I work on a friends computer that has a jewelry production store and uses this software. I decided to see how it works because he speaks very highly of the product. I used only zbrush for modeling jewelry and worked like a charm for me but i still wanted to learn a little of CAD to seek new possibilities. I wanted to try the software first because i don't want to rush into buying a software that costs 8000$ without testing it first. He's computer runs matrixgold very very laggy when starting to place prongs and stones. Thats why i was trying to find out what specifications are required.

[@donsjewelrymakingandjapantrave]

@@eliasdenitiu9352 yea I can understand that. I would probably do the same. I’ll dig into it a little deeper and see what I can find out. Envy you with zbrush that’s something I’ve very interested in myself. Hopefully someday will I have some time to dig into it. I also like Blender. I’ve been playing around with that the last several years. Pretty cool stuff. Blender actually uses the same rendering engine as martix Gold. Cycles. Also uses nodes which is a good basic foundation for grasshopper inside MatrixGold as well.