Mavic Pro Controller Fail - Don't Make This Mistake!

[@51Drones]

Looking for the best cheap drones? Click here and help this channel grow! click.dji.com/AFP_ZDdVKYOsLBN_jM8O9w?pm=link

[@meTimetraveler]

those drones use cheap motors, they are 2 wire where the DJI use 3 wire heavy duty motors ( one wire is a tach, the other 2 are for the stepper motor) you get what you pay for.

[@royvincent9250]

8 tracks my first car had a 8 track player yup im old as dirt

[@Ronstopable01]

51 Drones thanks for the tip I wish I could have seen this video first...I destroyed my USB port on my Mavic Air...so I need to buy a new controller...so to confirm the micro usb goes taper side up?

[@im_just_serious]

51 Drones is the remote cable same for Mavic 2 and Mavic air...ie ... the port and connector on the remote...thanks in advance

[@AlanDoubleYou]

Its not just that people have been put it in upside down. The charger port is loose too when you are trying to charge it, it doesn’t connect 100% it glitching a lot.

[@Brian-xd2oi]

I’ve placed a spot of white paint on the mini usb connector now, so I can immediately see which way is up and avoid an expensive mistake. Thanks again Russ.

[@Gbfaninnm]

Put a dot of white paint or nail polish on the "top" side of the cable for a visual indication of which way it needs to be plugged in. Definitely agree, USB-micro needs to go away!

[@autisticboi2992]

isn't there a little usb symbol on the top of the plug?

[@Gbfaninnm]

Sometimes, but not always. The white dot is much easier to see. :)

[@frederichore1890]

Thank you for your tip. After you correctly insert the micro-usb cable into your controller (9:09), put a white dot on the black connector body on the side facing up, with white correction fluid. That way you will always know what is the correct orientation. Also flag the cable, that is put a tab of white gaffer tape on it and mark it as you DJI charging cable and keep it with the charger and other accessories you carry. Final note: this video is much longer than it has to be. Less is more. Keep in mind for future videos. Cheers, Frederic in Montréal.

[@HughD]

Thanks for the video. I take a silver Sharpie marker and put a silver dot on the "up" side of the plug end of the cable. I'm using to charge it with. Works for me.

[@datadogie]

Same idea here. But I used tipex.

[@terryandteresa]

Hugh Dinwiddie I put a piece of blue tape on my up side.

[@genefoster9821]

Same here I use a white marker to add distinctive marks

[@pmessinger]

Gee, I thought that was my idea.

[@flyingpete]

Yep. Thats what I do. A dot on the plug and the controller so to plug in match the dots.

[@none-your-business1145]

Lucky man... I can’t even talk with my wife for longer than 15 seconds (she has extremely low tolerance/patience). You just expanded this one tip to over 12 minutes. Amazing.

[@basspig]

The Mavic USB port is a Micro USB-A port. Your cable is a Micro USB-B connector. Sure, you can force fit it, but as you found out, it will eventually break the port. Monoprice sells the correct cable for 92 cents. I ordered a dozen of them.

[@chiupolini]

I was told by DJI that their RC Port was "USB micro AB" type so that it would accept both micro A and micro B plugs. The thing is they don't tell you that there is a fixed side you should insert it if you are using micro B plugs.

[@Make-Asylums-Great-Again]

I couldn’t find any micro usb a cables on that site, do you have a link to cable?

[@chiupolini]

No, the charging socket in the M2 controller is not micro A. It is micro AB. You won't find any Micro B to Micro AB adaptor in the market - not that I can find anyway. But as the cable from the charger uses micro B plug, you can buy a micro B to micro B female to female adapter. Insert the micro B charger cable into one end of the adapter. Then take the RC cable which comes with Mavic and insert the micro B plug into the other end of the adapter. Use the other end of the RC cable, which is micro AB format, to plug into the micro AB socket of the controller. Problem solved.

[@MountainParameters]

Great idea! I cannot seem to find a Micro B female to Micro B female adapter on either Amz or Ali-X, wondering where you found yours?

[@chiupolini]

I just picked one up in a computer shop. May be you can try search the following keywords in Google "Micro USB Female Extension cord 29CM USB Micro Female to Female Data charging Line Both side Micro USB Female connect Male Wire" In the search result, look for pictures display, and click the first picture. They are in AliExpress site. Good luck.

[@MrToporkoff]

Broken micro USB port is standard problem for smartphones. So smartphone repair shop can do this job easy.

[@raymondcheung2775]

12 min video to educate how to solve a simple problem by using exaggerated label to attract people to click in.

[@johnteague2231]

Thanks for confirming my experience. Just yesterday, I bought a used Mavic Pro. The only thing missing was a cable for charging the controller. At first, I was stumped because I couldn't find any micro USB cables that were rectangular.This morning, I took the controller to Best Buy and asked them if they had the appropriate cable, and when they saw the rectangular USB port on the controller, they said, "No, man. That must be a proprietary connector. You'll have to buy the cable from DJI." I went home and did more research online and learned that a standard USB micro connector would work if you put it in the right way, as you describe in your video. So I did a quick experiment with an old phone-charger cable and quickly learned it does fit, I only wished that I had seen your video earlier and saved a trip to Best Buy. And I fully support your appeal to DJI to update the port technology.

[@ronberry8485]

Had the EXACT same experience! Except the bestbuy part. Very nice job by the host.

[@toddrusteberg]

Thanks, good to know, I just bought the MP Platinum.

[@Polychronisdrone]

Hi Ross, Thank you for sharing your experience with the remote controller and the micro usb port which is not that great. Do you know if the Canadian company is reparing drones from Europe? Greetings from the island of Crete in Greece!

[@MrLittleman777]

Great tip! I too am always squinting to see if I’m putting it in correctly. Bad design. Good video. Please keep them coming.

[@alexuswilliams5426]

Thanks for the insight... i just got my Mavic Pro yesterday and immediately noticed the charging port difference. I am glad i saw this video, now i know to pay attention every time i charge my controller... Thanks!!

[@bmgrace29]

on most USB cords the taper end has the USB symbol on it so just make sure that the symbol is facing the top of the controller.

[@WatchDutchMD]

Nice video thanx for the info Greetings ! Brian

[@DFDuck55]

Hint: There's usually a USB icon on both ends of the cable. That icon "most always" goes up, or toward you when the USB port is vertical on a device.

[@knockg7266]

I cannot rely on using the USB icon as I have cables where the USB icon is on the micro-USB's "tappered" side and other cables where the USB icon in on the micro-USB's "non-tappered" side. My "cheat" is to look for the two "slide rails" on the bottom of the micro-USB connector as my guide to which side is down. Having seen this video, I now have a paint mark on the connector to indicate up.

[@wayneburnett5098]

I have 2 phones, both micro usb's plug in opposite!

[@DenisHeiderick]

Check my new MAVIC video kzbin.info/www/bejne/rYmvi6Whdq6kmpo

[@horsetom10]

It's funny how smartphone manufacturers can't all agree what way the connection goes. I have both a Nexus 5 and a Samsung Note, guess what!! even though both are micro-usb they go into the port different way gggrrrrrrrrr so USB icon is useless in this case.

[@4x4EastCoast]

I understand the frustration. I have a mavic air. I always take note of the cable that goes to the phone. It can only go one way so I look at that to make sure I have the charge cable in the right orientation.

[@graystar69]

u are so right but as someone said in a later comment, it is a micro usb "a" that is rectangle....dji ships the drone with the incorrect plug....I was charging mine with the supplied cable until it just did not feel right....if u look at the supplied android to controller plug, it is micro usb on one end and a rectangle micro usb a on the other....this is a gross oversight of the company and I'm sure it has caused a LOT of broken controllers....now I have to wait for the cable to arrive before I can fly my new drone :-(

[@ronbullen5628]

I just put fingernail polish on the correct side of the cord input side to the controller after watching this video a couple of months ago. This works very well and I appreciate seeing these videos. regards,Ron

[@N_Wheeler]

The Mavic controller has a USBMicro-A (rectangular) port, while the industry standard is the USBMicro-B connector. I can't figure out why. But, you have to be gentle with it, THAT I know.

[@sdslim9012]

Many have likely suggested this, but I put a small white "dot" on the "up" side of all the Micor USB pluigs. (white-out, or white paint--pen). I do this on ALL my micro-USB goodies; Really helps.

[@stancedaniels]

Use a white marker to label the top of the USB, so you know easily know which way to plug it in without having to check closer

[@krnlueck]

Thanks for the tip. I have noticed the problem with the micro usb port myself. I think I'll start being more careful!

[@t-risely]

If you look at the port, the small plastic border around the actual port, it has the shape of the micro USB connector. It has two tapered corners. Take a close look and you'll see. Also let everyone know as this will stop people breaking it!

[@BRollOffroad]

at 3:14 i actually noticed (i hate this square port as well) it has a ghost outline of the taper around the port. i always remember this one because it's upside down. every other micro USB i have the taper is towards the bottom, as with display ports, mini USB, HDMI all taper at the bottom on everything i have... it's upside down.

[@Hidden_Destinations]

I ALWAYS put a simple permanent marker mark on the connector and cable. I even do this for my rechargeable vacuum cleaner! Use a black or silver marker depending on the surface so you can see it.

[@chrisgrossetti5727]

Hi from Australia, my name is Chris, I have just been given a Mavic pro platinum fly more combo drone as a present. Never flown a drone before in my life or new anything about one, started looking on KZbin came across you! I Just want to thank you for your channel it has been super informative for me and I have the confidence to be able to set it up and fly it. Keep up the good work, Many thanksChris

[@escapemechanic]

Ordering a magnetic cable with micro USB so I can just leave it in. Will let you know if it works.

[@MB-hm1zd]

Great idea!

[@stevenw973]

Any feedback you're willing to offer on it since you've been using it for some time now?

[@USMC-ce2ek]

Yup, all my electronics with Micro USB have magnetic adapters! Leave it in and forget

[@Herbheffner]

What's the verdict?

[@Oneyejack59]

Herbheffner I have tried various magnetic connectors and have not had much luck with them. They don’t keep a solid connection. Especially for data transfer and since that is the same port used for phone/tablet to controller, you definitely don’t want to lose connection while flying.

[@DadRandom]

Thanks Russ!

[@maxboya]

9:05. You are welcome.

[@LuMaxQFPV]

The side jack on DJI controllers is a USB Micro A. The typical USB cord we all have laying around the house is a USB Micro B, with it's little D shape plug. While it is "possible" to force the Micro B plug into the Micro A jack, this will put stresses on the jack that will shorten it's life considerably. If you lose your DJI charging adaptor, (which is why I hate adaptors in the first place...) You can readily purchase the correct USB charging cables on Amazon.

[@grafire80]

ur right. The side microUSB-Port is not really the best - the conncection stopps and so things.. So i am ever using the USB-Port on the bottom.

[@Trafcon]

Good point about the USB-C I just bought (last week) a new Surface Pro Laptop/Tablet and Microsoft are still using Micro-USB. Love the Surface Pro but this one thing sucks !!!

[@bobuk5722]

Hi. Why, oh why, do manufacturers use this sort of connector to provide power? It's really not up to the job. Even when you get them in the right way round, and it does help if the case moulding reflects that, then they are still flimsy and fail. I've found its often the plug rather than the socket that fails. A very gentle 'crimp' with a pair of narrow nose pliers can sometimes restore connectivity. Try at your own risk! BobUK.

[@johniwuji]

thankx you for the information

[@Lets-do-this-]

All of my devices with micro USB plug it in and then I take red fingernail polish and put a dot on the cord an on the product that way I never have to look at it again

[@tombuck]

Wow, thanks for pointing this out. Didn’t even realize this was an issue! I’m really glad I found your channel.

[@mr.tuckers2848]

USB C cable would solve this issue as it can be plugged on either side. Does this make the Mavic USB cable proprietary? It doesn't seem like it's standard connector. =( The USB logo indicates which side is up or down as well. Is there not a logo on there? Most devices have the logo- still waiting for my device to arrive and I won't know until Tues. =(

[@thetran330]

OMG. I made exactly the same mistake and it's costly. Wish I could have watched this video earlier. Thank you for sharing. I have my Mavic 2 Pro for about 3 years and recently it failed to return home, but it just lands wherever it is at that point. I did set Home Point Settings and got the announcement that home point have been updated every time it takes off. Anyone has any suggestion for me. Thank you.

[@disgruntledegghead6923]

Set your home point to the location of the controller.

[@terrylord5033]

Can't believe people can't remember which way round to insert the Mavic power lead, but I agree it's a poor socket even by micro usb standards

[@flyingpete]

When you have a phone - 2 tablets - small personnel player - torches - camera and Mavic - all usb, try to remember which way they all plug in.

[@РоманПлетнев-г3э]

"even by micro usb standards" hehe true

[@DiogoTorres17]

I do @@flyingpete

[@discoveruniqueplaces222]

Very helpful, my controller will no longer take a charge. Wish I had watched your video a few months prior and I probably would not be in this situation. Keep up the good work, thank you...

[@therealdark1808]

I thought everyone knew that those are directional 90% of the time. Pro tip for you guys! The only ones that are not directional are type C and the Apple lightning jack lol

[@JoeyFerrisMusic]

Good tip, thank you

[@GankTown]

mine only goes in one way

[@Hughes500Bob]

OK Thanks ... Smaller side up! I put an adhesive dot on that side of the plug to remind me. This issue may also be why so many people have disconnect problems .... the pins are getting out of position when using the charging cable .... where most blame DJI on cheap controller cables.

[@kriptonis]

2:58 "I could not remember witch way it went IN". Nice excuse, but still won't work with her.

[@KhurramAwan52c]

i like the calm way you explain things ... thanks man

[@Dragonovus]

It depends on the person itself to put the USB in the wrong way. You aren't really a careful person. I never had this issue because I used to check this also with my phones.. but since I have USB C phones I am extra careful. Wonder why DJI didn't go for USB c ones

[@Maniac742]

The whole point of micro USB tapering was to prevent mis-insertion, but DJI was retarded to make the port square against industry convention. That's their terrible design. No one else's.

[@51Drones]

Because I have been getting a lot of questions about using the bottom USB to charge the controller, just know that it does not work. You can only charge the controller by using the micro USB. I promise!

[@Goodboy38581]

51 Drones Correct

[@Goodboy38581]

I don’t know why they just didn’t make it USB-C

[@romeomesina7696]

Interesting video, but no offense and please dont take this the wrong way. You should really pay attention to how you plug in USB ports. You're not the only one, which is why USB-C is invented. Anyway, the control board that houses the USB port on the Mavic Pro controller can be replaced, it's just a matter of finding the replacement board on ebay. If you watch some of the video on KZbin about disassembling the controller, it's actually easier than you would imagine. I know, I've done it before and I was afraid because it's an expensive controller. But after getting over the fear, I was able to disassemble and reassemble the controller on my own.

[@warsameadam5572]

Romeo Mesina I agree Dji logo is one top indicating micro usb correct way to plug in. But it’s not an easy one for consumers to be honest micro USB ports the worst with little thoughts into it this is why usb C design port is multi directional . Apple is ahead of the rat race here .

[@StevenTheGeek]

This isn't a case of USB being plugged in the wrong way, this is DJI using a non approved socket. DJI aren't allowed to display the official USB logo if you can slot it in the wrong way. USB standards before USB-C were created for a reason too :)

[@ltlt733]

Thank you for heads up! I just wrote "UP" on top of my DJI charging cord connector.

[@Randyindecatur]

Ken Herron because of that age and treachery advantage. Plus he always has Dana with him.

[@saheednabie7084]

If you clearly watch the remote controller it has a usb input in between of the to phone holders. So if you are going to use a different standard micro usb cable I suggest using the USB port instead of using the side connection. Doing that you will never break the side connection.

[@51Drones]

How do you charge it? (Of course, I have figured it out, as this video is nearly 4 years old, but that was the issue. Couldn’t charge it.

[@mjordan812]

NO! Do NOT tell them to use a proprietary connector! USB-C would be lovely, but in the meantime, the little USB symbol on the cable end faces up. If you can't see the symbol you've got the cable backwards.

[@Woodzman]

Have you tried charging it from the lower USB port ? It works the same for connecting a phone to is so I would think you could charge from it.

[@51Drones]

WOODZMAN ADVENTURES It only charges from the micro usb.

[@arthurshemet135]

I do appreciate your videos and the details that you get into!!!! Thanks

[@jefffulmer5936]

Thanks for the info...the first few times I ran into the same issue with quickly trying to plug in the cord.

[@jwhit2549]

Replace the remote circuit board , $48 amazon

[@51Drones]

Ya, I was told by one of the dealers those are out there, but that they don't always work. (Of course, he could have been trying to sell me some services.) I just decided to get the real thing and not worry about whether it was going to work or not. Here is the link for it: amzn.to/2JLMUm0. But I would use at your own risk.

[@josheh4]

Don't even need to replace the whole circuit board. One could replace just the usb port. If all that is broken, is the little tab, then you should be able to solder on a new one.

[@josheh4]

I'd like to clarify, that you may or may not be able to do a replacement of the usb port, since they do seem to have a somewhat custom one. If you could, it could cost a few cents for the part. Otherwise, a board replacement for that area can be had for 16ish dollars (if you're paying 48, you're getting ripped off). The problem you have with yours, is not a 200 dollar problem. It's barely a 48 dollar problem. The only reason it should cost as much as 48, is if you're paying someone to do the fix for you.

[@rcharris1969]

jwhit2549 ≥

[@ironmanmachine]

Personally I would buy the replacement board, and just swap the port. If you can do basic SMD soldering, this would be a breeze.

[@jonathansheldon9708]

Hey Russ. Thanks for the video. Just got my Mavic Pro in the mail yesterday and don't want to break it so early. Very helpful...

[@mohdafzal518]

people generally say "Thanks for watching" in the end.. you first said this and completed responsibility.. 😁👍👍

[@iBeannie55]

I've been having trouble with DJI supplied Gimble clamp & would like to know the one you showed in a video I watched that you called a Heavy Duty Clamp. Not the bulb shaped Gimble cover, but the Clamp that keeps it from moving during transport. Also, having trouble getting a push-on filter off the camera lense. Any hints? I'm afraid I'm going to damage the gimble if I Man-Handle it too much. I have really enjoyed your videos on the Mavic Pro. Hubby got me one for my 73rd Birthday last year & it is sooo much easier to fly than the Phantom 2 I got when they first came out. Hubby liked mine so much, he got one too. So now he has a Phantom 2, a Phantom 4 & a Mavic Pro.! Keep posting. I love your work.

[@51Drones]

It's from Polar Pro. It's awesome! Those that drone together stay together! Lol

[@djr320]

This is a non issue. Who puts the micro USB in the wrong way?

[@soentrueman7944]

So many people that they actually changed the design with USB C. ;)

[@BuiltByRik]

Micro USB SUCKS

[@toantran3421]

Thank you for sharing the FAA aspect of controller repair. This is a common problem with micro-usb ports in general. I use those magnetic chargers that they sell on Amazon to minimize this. They don't last, but the only time I would be unplugging from the port is to replace the plug.

[@jasonyoung1569]

Could you provide a link to what you use?

[@KaBaPilot]

I'm glad I'm using the original cable only xD

[@GankTown]

same lolololololol mine only goes in one way lololol

[@krnlueck]

Can you please explain what that means? What is an xD cable? I believe I am using the original cable too.

[@KaBaPilot]

Karen Lueck I never said something about an xD cable. xD is an Emoji, before Emoji exist.

[@youbetubber777]

DROHNEN.DANIEL idk where mine is lol

[@KaBaPilot]

A.J. Williams lol 😂

[@daim831]

At 3:39 I almost fell of the chair. Seems like you got "a little frustrated" there, eh? ;-) Holy cow, how did that happen? Now seriously, thanks for highlighting this to current and future owners of this device. I'll watch out for that, so likely your video saved me some trouble and money. thank you!

[@captainmojo7968]

comment.....lol Thanks for the tip!

[@pcarnahan45]

On all my USB and USB C ports, I glue a red dot (or dab of nail polish) on both the correct surface of the cable and the insertion point (matching red dot to red dot). Works especially well in bad light!

[@Brian-xd2oi]

Hilarious, with superb advice...’dude’ lol.

[@reneeantonthibaultbijl3667]

This was very informative thanks , Could you do a video on the photography side of the mavic pro ,ie how do you control weather the drone records to the phone or onboard chip ,and how to change from 4K to to other size video formats

[@billut400]

Ken would. He would talk his way out of it. 😜 Bill

[@jmcguire708]

Agreed on the micro USB rant... I just got a new Mavic Air and the drone itself has a USB C connector but the controller still has a micro USB connector. Their fix was to include a USB C to micro adapter in the box l. What a joke that turned out to be... The adapter fits loosely when plugged in and if the cable is not held just right, the controller will not charge. Sounds like I will soon be in the same situation as you, only caused by the OEM supplied accessories!

[@buckhorntx]

Thank you for this video, Russ. I have notice, the two or three times I have charged the controller that it is difficult to make a mini fit. Assuming from the start it was a regular mini, now I need to go find the one that came with it. I am always careful with the minis on any of my gear, double checking the "fit. On another note, belated thanks for all the beginner videos you have done. No telling how much grief I have been spared, having the information up front is so many areas. Hope you get some warmer weather soon, I have a son in Nort Dakooda and keep an eye on your Winters. Too much for my old bones....

[@mattandrews557]

Hey thank you for the informative video I am a new drone pilot only a year I do have the GoPro Karma with the black 5 camera work fine for 6-8 months no problems no crash is nothing and then after I get a software update I know this sounds strange but then the stabilizer was no longer found IE the camera GoPro has been awesome they've replaced every single part thinking it's some something else that's going on I'm due to get my GoPro 5 black camera back as a replacement and I will update you if it actually fixes the issue I'm convinced it's a software / firmware update on the controller itself cuz that's the only piece of Hardware there's not been replaced. Thanks again Matt

[@JoeyFerrisMusic]

Does DJI care cover the controller?

[@51Drones]

No. But they have replaced others I know.

[@gtj1715]

I have placed a dot of fingernail polish on the "top" of all my charger cables... lime green is micro-USB, white is mini-USB, etc. With the move to USB-C, I'll have to come up with a new color scheme... On the (larger) USB end, it's "orange up"... You get the idea. Works great.

[@jimpulley1472]

I really like your videos about all the mistakes you have made since you started flying drones. You are a good humble teacher of what not to do...

[@shannonstephenson0993]

Good job. Great information and would this situation apply to the Mavic Air as well?

[@51Drones]

Woodrow Bryan Absolutely!

[@johnnysouth4982]

Need some help drone bro I know I thought you did a video on the micro USB port and the bigger full size port on the bottom of the mavic pro controller the problem is when I plug in my device to the bottom port it doesn't connect to my device trying to keep the controller battery from draining it keeps wanting to charge my devices Android phone and Android tablet I could have sworn you did a video on how to plug in a power bank in the side port of the controller and you r device to the bottom port what cable is used to do that please help thanks sir 👍

[@marctrainor5595]

Bless your heart for sharing this! I just bought a used, but only used once Mavic Pro, and I noticed the female input on the controller was that square micro, looking one. I didn't know you could plug in the one with the beveled top edge. When I look at the little pins and stuff in either the male or female, they don't look quite like they'd match, but again, I'm old and my vision is worse. I did try doing it like you said and it seems to work. I know this from using my cell phone, it's soooooo easy to plug it in upside down, when your not looking or in a hurry. After your experience, I'm absolutely gonna pay attention to all of this. That's about par for the course that it would be so interconnected it would cost a bundle to get it replaced. You know, I'll bet, if they engineered it where they had a little harness that the female input that's on the controller was attached to inside the controller, we or they could just buy the little harness with a plug on each end and put it in ourselves. That would make more sense to me, because these little plugs take an enormous amount of use and abuse. I know my cell phone input, eventually gets very lose and thank God I have the maintenance type extended warranty on it or I'd be buying a new cell phone for about 700 bucks, all because of this cheesy little wimpy plug they have on here. Thanks again. Marc.

[@zerocool321]

it's like they haven't updated the overall platform for Mavic pro. I have the AIR and i love it. The fly more kit, The controller, storage in the bag. very nice configuration. I just got the Mavic Pro 2 and it seems like its last generation ideas. The bag isn't big enough for the drone let alone batteries, chargers, accessories, ETC. Now onto the controller. I had to sit down and Google how to charge because that wasn't clear straight out of the box. Looking at the port for the first time i was like "this is gonna be trouble" then i find your video AND thank god you put this video out. This should be pinned on their website so people can be cautious. I have now subscribed to your channel because i have seen 7 videos and liked all of them so far!

[@crostfam]

you can purchase a magnetic micro USB cable. This allows you to insert a tiny adapter in the micro USB port AND LEAVE IT THERE. Then the cable attaches magnetically to the tiny adapter. You can find the on Amazon/eBay for about 5 bucks :)

[@51Drones]

Yep. Did that. Made a video about it. ;-)

[@leotexas3485]

I’ve used 3 different brands of micro USB cables for the Mavic 2 remote, but each cable causes a little more damage to the port each time I insert the cable - even though I do it correctly! It seems as if the only way the remote’s port doesn’t sustain any damage is by using the DJI supplied micro USB cable and the included micro USB cable on the power adapter. I don’t know why this is, but I can only use the DJI cables for that port. So much for charging it with after-market cables on the Fstop Labs Mavic 2 Battery Charger ...

[@richardgatecliffephotograp7024]

Thank you Russ. Got my Mavic Pro yesterday and was initially concerned that I wasn’t in possession of the correct DJI remote charge lead. Your video is a great heads up.

[@bradbilger]

The first time that I charged my MP controller, I did the same thing. Tried to plug it in upside down. Went and got my paint pen and put a yellow stripe on the top side. Never had that problem again. Easy fix.

[@philipolivari]

Hi mate, I have the same problem with my mavic air.. How you repair it? Or you buy the new 1? I hope I still could repair it..

[@junesomers9921]

Thank you for our help wish I knew a week ago, I made the same mistake. Called DJI and they said it was discontinue and could not be repaired.

[@LyleDetriot]

Great tip. Thanks Russ. The reenactment was pretty FUNNY too! Busted out laughing! Have a great weekend brother!

[@montearehart9283]

Great video and helpful. I have an unrelated question for you. I had a flyaway up into the forests of Oregon with my first Mavic Pro. Hunted for a month with no luck. I did purchase another Mavic Pro and after four months a hiker found my first drone. I had my name and phone number on my FAA registration card under the battery and the guy called me. Wow Got it home battery is toast so put in a new battery and the props did their jerky move, the gimble did it's gyration and the lights front and back flashed on. By the way, it had rained several times on the drone in the woods.. Nothing more but the same happening each time I restart it. I have talked with a DJI repair in San Francisco and was told the board is probably toast and repair is out of the question? I now have a expensive boat anchor.LOL Is there any value here other than external parts?

[@51Drones]

Monte Arehart Oh man! That sucks. I would think someone has the ability to fix it, but I don't think the cost would be worth it. I would call that Canadian company in the description and ask. Worth a try I guess.

[@montearehart9283]

I will call the Canadians "A" but have come to realize my wayward Mavic will probably hang from my office ceiling like I did with my model airplanes as a kid.

[@1ProShooter]

Great tip that would easily be overlooked. I've had my Mavic Pro in the box unopened for a year, and it's time to get flying. QUESTION: Before I invest in a holder for my old large iPad, does the pad work very well compared to the iPhone X? I need reading glasses for the phone.

[@rexybundy]

Lucky I come across this, thanks for tip mate, I didn't even realized, I've made this mistake a few times, I think I will mark the top of my USB connection so I remember, thanks alot mate, all the way down from Australia. Keep the tips coming, I'm a new first time owner of a mavic pro platinum, great little drone but for the price you would think it would record sound, I bought the drone for fishing but also when we go away, I love to record videos of our holidays, is there anyway we can get it to record sound or maybe possible fit another camera that can record sound on the mavic? Cheere mate.

[@51Drones]

No, unfortunately not. The propellers are too loud anyway. I would assume that someday a "silent" drone would be developed that would allow for recording audio.

[@RoyHessey]

Marvellous tip. Many thanks.

[@RiptideRigo]

Wow, i never knew this and always poke it before getting it right. Thank you so much for the heads up.

[@debbielynn6683]

Yes, when I first heard about this issue I took my plug and a sharpie marker and marked the up side. That way I’m always looking at the marked side as I’m plugging it in. And a big YES to your statement to DJI... they can do better!!

[@rlbutterfield]

I would like to see a link to the repair facility you mentioned. You mentioned a link to the good repair place you found in Canada, but I did not see that link.

[@51Drones]

Randy Butterfield It's the now. Sorry. Forgot it when I posted.

[@rlbutterfield]

51 Drones WOW! Thank you for replying. I don’t respond very often to anything, but you sure impressed me with your quick response. I am a subscriber, and have always enjoyed your informative video posts. Many of them I have saved to watch again. I have enjoyed r/c flying for many years, but am fairly new to drones. One of my regrets is that I wish I had discovered your site before I bought my Mavic Pro Platinum. Another regret is that, living in Michigan and dealing with ever changing weather conditions, I have not been able to fly as much as I would like. I hope I will never need this repair link, but it is refreshing to know it is available. Thanks again, and please continue your great work. 👍🏻👍🏻👍🏻

[@donlewis1969]

www.multirotorheli.ca

[@chiupolini]

Great discussion. I am from Hong Kong. Just got my Mavic 2 Pro yesterday. My first Mavic. I ran into the same problem. I found that RC port is rectangular. But except for the RC cables, I do not find any charging cable which has a rectangular plug. Even the charging cable attached to the DJI charger is USB micro B type. So I went up to the DJI Support at Facebook. There, after much explanation including video and photos, the guy told me that USB micro B could be inserted into the RC part direct and told me not to doubt him. However he did not tell me that there were two sides to the RC port and that I should insert the USB micro B plug with the tapered side facing up. Emboldened by his "guidance", I confidently pressed the USB plug in hard and found no response. Today I went to the Hong Kong DJI Store and they found the RC Port was damaged by me!!!!! After I leveled a barrage at them about what I was told yesterdya by their Support, they took the controller in and now certify that I can get a brand new replacement controller for the "repair costs" of HK$356, or USD45.64. I paid under protest, but will try to get me a complete refund for giving me misleading information. DJI should have informed everyone about how people should properly plug in their USB micro B plug into the RC port for charging. But this is not in the manual or any tutorial video. I think you got a raw deal there. We all do.

[@dntanderson]

www.amazon.com/gp/product/B077TMW8F6/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

[@martinmaciel9780]

Definitely good info I just grabbed a micro usb and plug it in so I have to check and be more careful with that thanks for your great videos 👍👍👍

[@michaelgause9883]

Great video,I always wondered why they had usb micro when I knew they could make them like the new type c it was super easy to do.

[@ChileThailandtravel]

Thanks for sharing and I have subscribed

[@Bill14886]

Awesome tip on the micro USB side port. I put bright orange tape on the correct sides to connect together. Top of Controller plug and top of power cord plug. No mistake to be made ,easy and fast connection now. Set it and forget it. LOL Glad you gave me the idea. Thanks keep them coming.