Maxxis Carnivore 30x10x14 Weight & Installation on Beadlock Rims Can-Am X3

[@markmanning6773]

Set them flat on the rim on a top down 5 gallon bucket and then you can push down with 2 knees and one hand while airing with the other hand. Works like a charm

[@CC-wt9vi]

Those 30x10x14 carnivores came stock in my new Rmax. They are awesome!! Been too Hatfield McCoy, badlands and Bundy Hill off road parks

[@clattfamilyracing]

i find it handy, especially with beadlocks to push the wheel in the the opposite direction as the rear bead to help get the bead to seat. works most of the time, especially if the tire was banded down during shipment

[@johnshultz4422]

Love the shop and all the Milwaukee tools!

[@wrenchesrides]

We love Milwaukee Tools!

[@BigDaddysGarage]

Nice to see you finally posting to this channel.

[@wrenchesrides]

Thanks bud. Time is hard to come by but we have a lot of these projects going.

[@ItMeZumn]

Yamaha Offers the Big Horn 2.0 in 8 ply. Exclusive to Yamaha is what I hear... Standard on the YXZ 3.5 lbs at each corner is a lot more weight on these SXS... starting and stopping. Pretty tire.

[@gregjones2217]

I ride in the mountain west. Bighorns just don't hold up. That was on three different machines.

[@lauramurray6690]

I'm sure it's a better tire but my maxxis bighorn sit almost dead level across the top

[@SteveSmith-wl8yq]

Nice video with good info.... I'm looking forward to your next installment (part 2). (updated -- to correct mistaken question)

[@wrenchesrides]

Part 2 is uploaded.

[@SteveSmith-wl8yq]

Just watched it...thank you for the info...

[@wilfredonunez3563]

@@wrenchesrides I cant find it can you pls provide link

[@stonemtnrubicon]

Rode 35 years at west va 19 at Hatfield McCoy legal trails

[@bayside6207]

Purchased 4 hardly pre-owned Bighorns 2.0's for a $100= saved me some serious dough-re-mi.

[@amirbell983]

I own a 2020 X3 xrc turbo rr 72" wide will stock canam OEM 14inch non beadlock rims fit on the machine with no rub or issues non beadlock rims 14inch

[@howardmiller4241]

Put a racket strap around the tire and tighten it up some and u won’t fight it👍

[@taterhead30]

...racket..? 🤦‍♂️

[@hydro_rebel7741]

Curious how these tires, probably a 28 inch, would work in an outlander 1000 xt.

[@hjfcoco]

Did you guys ever figure out if the machine got faster with the carnivores?

[@chevymudding01]

Wanting to but these on my 2021 sportsman 850

[@travisprince8122]

Hope to see the review video won’t to know about power loss and handling I ride fast hard most of the time sand hard pack dirt south Florida mud comes up I don’t try to find it but have to pass through to get to some trails just don’t won’t to lose a lot of power and do t have the cash to put out on clutching yet I’m in a xp 1000 4 seater

[@wrenchesrides]

We will be spending this weekend on the trails. From the road riding, we have done acceleration seems the same but there is a noticeable roll on braking. The small amount of weight added is noticeable when stopping.

[@douglowenthal1320]

I like those tires Can I mount those tires on the stock rims on a XDS I know the back rim is 8 in and the front rims are 7. Do you think there will be any kind of clearance issue with the back end thank you

[@WorkshopAddict]

You will not have any issue with the 8-inch wide rim.

[@carlsnyder1423]

Pro eagle jack is where it’s at!

[@wrenchesrides]

Hells yeah, but $$$

[@orvsr4me2]

Great video and review. Very professional video and information.

[@wrenchesrides]

Thank you Brian

[@Dive-Bar-Casanova]

Excellent. Thumbs up.

[@janetboderocco894]

What is a good tire for commander 800R my Bighorn Maxxis need replaced stay with them or?? Trail and mud riding??

[@mariost-jacques7490]

HI...if i run those exact same tires with bead locks with only 6 or 7 psi instead of the recommanded 14 psi will that harm the tire ..rendering the steel belt inside more flexable thus weakening it

[@wrenchesrides]

I have done it multiple times without issue.

[@pierrevilleneuve5445]

Maybe there's something I don't know I just bought some 30s by 10 by 14 and when you measure them there only 28 in can somebody tell me what is going on

[@theknaryagency4013]

Also, I have a 64 inch X3. Would I need spacers for these tires?

[@wrenchesrides]

Not for 30's or 32's

[@davidmcfadzen3737]

Could you please give the actual height and width of these 30x10x14's as they sit on the machine, maxxis usually run small. Thanks

[@wrenchesrides]

29-1/4 to the outside edge of the tire and 29-1/2 to the top. That is after 1,200 miles.

[@theknaryagency4013]

I've had bad luck putting different tires on my stock beadlocks. I've blown 2 beads on the trails. What are your thoughts of this tire on a non beadlock rim?

[@wrenchesrides]

They will work fine on either a beadlock or non-beadlock rim.

[@tomwoods205]

Great video guys! I am wondering after watching your other video which tires do you like better for Michigan ridding, the Maxxis carnivores or the STI x comp ATR in a 32”? Or recommend? I have a can am X3 RS

[@wrenchesrides]

Carnivores rock! They are soft and wear pretty fast. STI XComps were amazing, but heavy. If I was in for speed, i would go with the Carnivore. If I did not care and wanted the longest lasting tires, XComp.

[@oifvfw1]

Hey guys, great video. I was attempting to locate the jack you used in the video and the hyperlinked jack seems different. Can you provide make and model as I too have to use 2x4s and this is a great tool to stabilize them while lifting.

[@wrenchesrides]

Here is the EXACT jack we have. It is hard to find as it is a Craftsman. amzn.to/2DkNar6

[@joeframer9642]

Much nicer tires, should work better and last longer, great video👍

[@wrenchesrides]

Thanks Joe!

[@gooodboiify]

Sxsblog💪

[@joeyc4083]

sxsblog!! the best

[@stonemtnrubicon]

11,000 miles on my 2.0 on my Rubicon

[@hartlife7795]

Michigan guy too! I do lot of road riding how will these hold up or should I go with something else?

[@wrenchesrides]

They wear pretty fast on road conditions.

[@erwmlw]

@@wrenchesrides i live in Michigan too looking for something too thought yeah this is the tire but i want something that's going to last a little longer for Mi road conditions so wonder what you would suggest?

[@drewkuslis1284]

Hey I have a 19 X3 X MR will 32 fit on the stock rim or is a offset needed ?

[@wrenchesrides]

X MR is 72" wide? if so, it will fit. If it is 64" wide, you need an offset.

[@drewkuslis1284]

@@wrenchesrides thanks for the reply it is a 64

[@mikehaniotes3736]

Did you run spacers in the rear? I’m looking at going to the same tire on my x3.

[@wrenchesrides]

No spacers.

[@mikehaniotes3736]

Thanks, great video.

[@zacherycurrier4297]

Did these tires measure a true 30 inches?

[@brentnky]

No they don't, and they also are not the same width as he said in the video. The bighorns area a lot wider once mounted.

[@trailpros4435]

The bighorn is soo much better in Michigan sand. And I must say after going from bighorn to carnivores,,, the bighorns were better at everything.

[@lauramurray6690]

That kind of shop and your using you knee to set the beads if you don't have a tire bar use a 10 dollar ratchet strap

[@wrenchesrides]

Seriously, we are showing that anyone can mount these tires.

[@saulgoodman2018]

Should invest in a tire seater.

[@wrenchesrides]

Agreed, but $$$ and shop space.

[@saulgoodman2018]

I wasn't talking about those big thousand dollar ones. I was talking about something like kzbin.info/www/bejne/l32lg4CmrrqSkJI

[@WorkshopAddict]

Gotcha. If we played with normal tires that would be worth it. With beadlocks, we only have to get one side of the bead sealed and it is not that hard. With two people, there is no struggle.

[@stonemtnrubicon]

I ride Hatfield McCoy been out west.....sxs to much power for a 2.0

[@cnw4x4]

I don’t run any more than 5psi on my tires if they can carry the load.

[@wrenchesrides]

Good Traction there! We have no aired down that low with these.

[@stevesherry9776]

8 pounds max! 8 ply & bead locks!!

[@cragarx3turbo763]

30 or 32 hmmm

[@wrenchesrides]

30's are shy of 30"... If I had to do this over again, I would have went with 32's....

[@cragarx3turbo763]

Wrenches & Rides thanks guys good info

[@CasperRc81]

They DOT

[@wrenchesrides]

No

[@Mega4kids]

Ive heard a bunch of guys say they are dot. idk tho