Maytag Atlantis Dryer Loose Baffle Repair

[@rob550]

I watched your video and fixed our dryer in about 15 mins. I appreciate you uploading this tutorial and hope you have an awesome day! Thanks!

[@theworldhadteeth]

You are welcome sir! Glad I could help!

[@hueyslick291]

Just a quick thanks. Followed your video step by step and was a complete success! You did a great job of making the process simple. Videos like yours make home repair within reach of the average homeowner.

[@theworldhadteeth]

Yessir! You are welcome. I'm glad to help!

[@skipszymanski2685]

Great video for loose baffle!!! Taking the dryer apart is the hardest part and you made it easy! Many thanks. Skip

[@theworldhadteeth]

You are welcome sir! Glad to help!

[@catbertz]

I love the internet for this stuff. My baffle just started flappin' and I found your video as first result on Start Page search engine result. Thanks for the video! Also, your channel name is funny. 😁

[@theworldhadteeth]

You are welcome! I'm glad I could help, and glad to hear it is the top search result!

[@mcee2424]

Thanks for the video, saved me a service call fee along with any other fees for such a simple fix!

[@theworldhadteeth]

You are welcome! Glad to help!

[@gwenwolford70]

Thank you so very much!!! We were able to fix the problem before any screws were lost or washers were needed. So simple and easy with your thorough instructions and demonstration.

[@theworldhadteeth]

Yes ma'am! I'm glad I could help!

[@ClintLudeman]

Over 5 years later... and your video is still awesome. Wife was searching online for a new dryer... and I was searching online for the old manual to compare with newer models and this video popped up. So instead of a new dryer... I tightened the baffle screws and we are drying again! Thanks for taking the time to post. Straight forward and an EZ fix!

[@theworldhadteeth]

You are welcome sir! Now spend some of that "new dryer" money on a nice restaurant meal out for her!

[@DavidWiens]

Sometimes its scary how specific a KZbin video can address your problem. I have the exact dryer with the exact same symptom (back screw of a fin worked loose). Very helpful, thank you.

[@theworldhadteeth]

David Wiens You’re welcome. Glad I could help!

[@eilakenslow6273]

Thank you so much. This saved me from a repairman bill or a fight with my husband. I fixed it myself. All Smiles when a lady can do it herself.

[@theworldhadteeth]

Eila, I'm so glad I could help!

[@keithwest4328]

I wondered where the hole in my pillow case came from. This was so great. Took less than 10 minutes. Thank you.

[@theworldhadteeth]

Yessir! Glad I could help!

[@kristinwooten3255]

To those of us who don't have people in our lives who can do this stuff, you are a Godsend. Literally. Thank you for making my world a little more manageable in general, and for helping me fix my dryer today.

[@theworldhadteeth]

Kristin Wooten You are welcome! I'm glad I could help!

[@kristinwooten3255]

@@theworldhadteeth you just saved me again today. Three years later and this video is still helping people. Thank you so much again!

[@theworldhadteeth]

@@kristinwooten3255 I love this! So glad I could help you again!

[@mariat6171]

Watched your video over and over in my basement & amazed myself that I could fix my dryer baffle. Thank you so much.

[@theworldhadteeth]

You are welcome Maria! I’m glad I could help!

[@carloscardona3924]

My Brother passed away And my Mother is 90 but he bought this Maytag Dryer so many years ago The Dryer still works ? Jeez not even the drive or belt have given out My respect for the engineers of this model Freakin incredible 😊

[@user-hv7pv1em8t]

Thank you for the video. Your instructions were spot-on. Took me all of 30 min and the dryer was back in business. Wife is happy and so I'm happy. Especially for not having to call in the Maytag repair man. lol... Thanks again.

[@Junior-fd8ux]

Thank you so much brother. Took me 5mins to do it and tightened all the bolts on the paddles for good measure. Had one backed out almost completely that was making a racket. Your the man.

[@theworldhadteeth]

You are welcome sir! Glad I could help.

[@rickydilemma6044]

Even after a couple years of you posting that online it's still a big help.. my wife and I experienced that funny noise tonight so I immediately checked online and found your video.. bolt was halfway out but I caught it in time as well as tighten up all the other baffles simple fix in 5 minutes.. appreciate it!!!

[@theworldhadteeth]

Ricky Dilemma You are welcome sir! Glad I could help!

[@clraze]

Excellent video. Clear, very detailed, easy to follow. My husband and I just redid the baffle in our ancient dryer, good as new!! Thank you so much.

[@theworldhadteeth]

Claire Zezula Yes ma'am! You are welcome! Glad I could help!

[@ukarjohn]

Thank you so much! I was contemplating a new dryer, but instead bought 3 baffles and followed your guidance.

[@theworldhadteeth]

Yessir! I’m glad I could help!

[@jbarnett23]

Worked like a charm! Great easy to follow instructions. Thanks!

[@theworldhadteeth]

You're welcome! Glad I could help!

[@DoyleFM]

I'm always amazed when I happen upon a YT video that actually applies to the exact model/product that I own. Thanks for posting this! 👊🏻 🇺🇸

[@theworldhadteeth]

Yessir! I’m glad I could help!

[@DoyleFM]

@@theworldhadteeth My baffle still had both screws in it so no fuss, no foul. It's currently drying a load. 💪🏻 We've had a really bad, loud squeal at startup for a while so I put on some STP belt dressing while I was in there. Is squealing typically indicative of the belt being old or is it usually the little roller wheels or maybe a bearing? Sounds like a dog being beaten... 🤔 🇺🇸

[@chebert9]

Thank you! Worked perfectly.....done in 10 mins. Good call on adding the washer.

[@theworldhadteeth]

chebert9 You are welcome, glad to help!

[@franksteinmetz6674]

Tony! thank you so much for posting this KZbin on "How to repair..."! Now I can, with your help, repair the baffle on our Maytag Atlantis!!

[@theworldhadteeth]

Frank, you are welcome sir! Happy to help!

[@franksteinmetz6674]

Tony, it only took about me about 30 minutes to make the repair. It took another 30 minutes to clean out all the dust, lint and other unidentifiable debris. Oh...while I had it apart I check all the other baffles and found a few screws that needed tightening! Thanks again Tony...you saved me some money!!! : )

[@melnimtz]

Thank you for being my guide fixing my baffle!!! You sir are appreciated!

[@SunnyInTheAM]

Husband and I just finished replacing the baffle thanks to your perfect instructional video!

[@theworldhadteeth]

Thanks Carole Costa, I'm glad I could help!

[@wayneyeo186]

Thank you... I followed your instructions, worked like a charm. Your instructions are clear, to the point.. common gotchas pointed out. I could not ask for better !

[@theworldhadteeth]

Wayne Yeo You are welcome sir! Glad I could help!

[@laveldap911]

THANK YOU! THANK YOU! THANK YOU! INSTRUCTION 100% ACCURATE - START TO FINISH EVEN THE SIZE OF THE SOCKET! I ORDERED THE PART AND ADDED THE WASHERS. THANKS FOR THE EXPLANATION OF THEIR USE!!

[@theworldhadteeth]

You're welcome Lavelda! I'm glad you were able to get it fixed!

[@ekringlie]

Thank you so much, great video and made my baffle replacement easy. Hardest part was finding a 5/16 socket since my boys keep taking them lol.

[@theworldhadteeth]

Erik Kringlie You are welcome sir! Glad I could help!

[@jchau53]

Excellent video it helps out a ton. One thing you should do is check the other bolts that hold the baffle since you already have it apart

[@brendahoffmann15]

Thanks Tony, I fixed my 16 yr old Maytag Neptune, great instructions!!!!

[@theworldhadteeth]

Brenda, you're welcome! Glad to help.

[@sblees93]

Thanks! This made my repair a lot easier by taking out the guesswork of how to get to the baffle! I fixed my loose baffle in about 5 minutes!

[@theworldhadteeth]

Shawn Blees You are welcome sir. Glad to help!

[@brettbarnes6926]

Thanks so much for sharing. I was able to repair my dryer with NO problems at all. Very, very helpful video.

[@theworldhadteeth]

Brett Barnes You are welcome! Glad to help Brett!

[@brandycromeens5589]

Great video!! Very straight forward instructions. Took me less than 15 minutes.

[@theworldhadteeth]

You’re welcome Brandy! Glad I could help!

[@charbonneau]

Well done and thanks. Fixed my in 5 mins after having the baffle off for years.

[@theworldhadteeth]

You are welcome! Glad to help!

[@calebdaniels5553]

Awesome advice, took me 5 min thanks!

[@theworldhadteeth]

You are welcome sir! Glad I could help!

[@jamesjameason8348]

Thank you Sir for helping me fix my dryer. Awesome video. Very thorough!!

[@SLY-USA1]

Thank you so much for this video. I had the same problem and thanks to your video I was able to fix it! You made it simple and easy.

[@mgoodwin3427]

Wow. Thank you sir! Our exact model and we had it done in 30 minutes (includes time finding tools and cleaning everything in there). Super straightforward video : )

[@theworldhadteeth]

M Goodwin You are welcome!

[@P220SAM]

Thank you for this video. It is exactly what was wrong with my Atlantis dryer. Less than 10 minutes with the right tools and I was done. You saved me a service call. Thank you!!!!!!!!

[@theworldhadteeth]

Stephen M You are welcome sir!

[@fractiousspoon3158]

Thank you! 3 and a half minutes, told me exactly what I needed to fix my dryer.

[@theworldhadteeth]

You are welcome sir! Glad I could help.

[@ArthurFranke]

Great video. Thank you for making it. Saved me a service call and lots of time.

[@theworldhadteeth]

You are welcome sir! Glad I could help.

[@hr1meg]

8 year old video helping me out today! Thanks! 👍

[@theworldhadteeth]

I love it! You’re welcome!

[@mesutt159]

Adding my comment before the actual deed but, this has helped me to know better what I am doing now I will go attempt to repair mine. Thank you so much for making this video! You are a lifesaver! I believe the wild cherry one! :-)

[@theworldhadteeth]

+mesutt159 You are welcome! Glad I could help!

[@mesutt159]

Yes... this was super easy to do after watching the video. Again Thank you! Fixed the dryer yesterday and today the washer is sounding like a helicopter is taking off... So off to youtube to learn that the Pump is probably causing the noise. Wow I love this. The money saved in calling a repair man! Cha-Ching!!!! Thank you!

[@TheHurleymonster]

Nice job. Easy to watch and super informative.

[@theworldhadteeth]

Thanks +TheHurleymonster in glad it helped!

[@toben42]

Thanks! Helped a lot. I even tightened another baffle that was a little loose after replacing one baffle.

[@theworldhadteeth]

Glad I could help!

[@maxslug1]

So awesome, thank you so much! Knocked this out in under a half hour and the bolts were just loose and still in place. One gotcha: the hooks that hold the top down can be flipped, make sure you get them back in the same direction they came out as, look for the wear pattern from the 5/16" screw that's coming out.

[@gerrypadilla3270]

Thank you very much for the information. Just fixed my Atlantis dryer. Screw was loose

[@theworldhadteeth]

You are welcome sir! Glad I could help!

[@Nitero_]

thank you so much! Fixing it tomorrow because guess which rachet I am missing? 5/16 you got it! THANKS AGAIN!

[@theworldhadteeth]

Yessir! Glad I could help!

[@mikesheridan9072]

Works for the Maytag Neptune, too. Thanks for this.

[@theworldhadteeth]

Mike Sheridan, you are welcome sir! I'm glad to hear that it's useful for other models!

[@elizabethbenavitch4528]

Got coins out of one of the baffles that have been driving me CRAZY thank you!

[@theworldhadteeth]

Elizabeth Benavitch Yes ma'am! You are welcome! Glad I could help!

[@davelance6781]

This was a great video. Many thanks for helping me fix my dryer.....you made it easy!

[@theworldhadteeth]

Dave Lance, you are welcome sir! Glad I could help!

[@amwatson1s]

Thank you so much for your video, I just had the same problem on a Maytag Neptune model and was able to fix using your video!

[@theworldhadteeth]

Andy Watson You are welcome sir! Glad I could help!

[@moviefreak382]

You are awesome! Just what I needed. Exactly what I needed to fix the dryer.

[@theworldhadteeth]

You are welcome! Glad I could help!

[@buzzby48]

Thank you. Clear and easy to understand!!!

[@theworldhadteeth]

buzzby48 You are welcome sir! Glad I could help!

[@fredklapetzky2698]

Thanks for making this video. Great instructions. Now off to do the repair.

[@theworldhadteeth]

Fred, you are welcome sir! Glad I could help!

[@vegaramos2]

Thanks for the instructions on how to disassemble the front and top, it was very useful.

[@theworldhadteeth]

You're welcome! Thanks for the comment!

[@marcob3635]

Amazing! Have the exact same dryer and problem. Great video!!!!

[@theworldhadteeth]

Thanks Marco B! I'm glad it helped!

[@ryanmcdonald5351]

Solid video. Found my baffle screw lodged in the blower housing!

[@theworldhadteeth]

You're welcome sir! Glad I could help!

[@ednasdeo5131]

The best part was the credits! CLEVER! Oh, and the diy video was pretty good too.

[@theworldhadteeth]

Yessir! I’m glad I could entertain while also helping!

[@argonvideomarketing]

Thank you sir! This saved me money which is definitely needed right now. Many thanks!

[@theworldhadteeth]

Shannon You are welcome! Glad I could help!

[@goatboyimbaaad735]

great instructional video....clear easy to follow thanks!

[@theworldhadteeth]

You are welcome sir! Glad I could help!

[@CMAdventures07734]

looks like my next project! it is making noise/moving so maybe the screws will just need tightening...thanks for making this video!

[@theworldhadteeth]

You're welcome Cara! Glad to help!

[@311mglover]

Fantastic step by step!! Thank you very much!

[@theworldhadteeth]

You are welcome sir! Glad I could help.

[@theworldhadteeth]

You are welcome sir! Glad I could help.

[@theworldhadteeth]

Yes sir! You are welcome! Glad I could help.

[@dneff68]

Thank you! My wife thinks I’m so handy now. 😎 Great video.

[@theworldhadteeth]

David Neff You are welcome sir! Please don't waste it! 🤣😉

[@arlavina]

This saved me time and a headaches. Thanks for putting together such a great video!

[@theworldhadteeth]

Anne you're welcome! Glad to help!

[@amiegladfelter9576]

I was able to put my dryer all back together with your help!!

[@theworldhadteeth]

Amie Gladfelter I'm glad it helped!

[@billiebenefield6020]

Thank you for the quick reply. Your video gave me the easy instructions/confidence to give it a try!😃

[@theworldhadteeth]

+Billie Benefield You're welcome!

[@thomassanocki7423]

Thank you....I saved $90 service fee and took me 14 minutes

[@theworldhadteeth]

Thomas, you are welcome sir!

[@pj4092]

This video was exactly what I needed, thanks so much.

[@theworldhadteeth]

PJ, you’re welcome! Glad to help!

[@Brian14451]

Great tutorial! Thanks much, very easy steps to effect my repairs.

[@theworldhadteeth]

Brian, you are welcome sir!

[@bobrizzo3831]

Thanks sooooo much for this video! Made my life much much easier!

[@theworldhadteeth]

You are welcome Bob! Glad I could help!

[@courtneykholousi]

This video was so helpful for me today. Thank you.

[@donskaff2968]

Outstanding, you walked right through it. Thanks

[@theworldhadteeth]

+Don Skaff You are welcome sir! Glad to help!

[@bigskiohio191]

Mine were broke. Just drilled deeper added washer and 3 inch #8 screws from hardware store. Worked god. Will try to send back bew ones i ordered. My bulb blew when baffle fell off though.

[@bigskiohio191]

Plenty of material to drill

[@markdisapio5306]

great advice! i have a neptune series dryer and it worked perfect. thank you for your know how.

[@theworldhadteeth]

Mark you are welcome sir!

[@BertTheStormtrooper]

VERY USEFUL! Helped me a lot! Great video, clear instructions.... and the end credits were the best! Thanks so much! Later

[@theworldhadteeth]

+Bert The Stormtrooper You're welcome sir! Glad you liked the funnies at the end, too!

[@chasing_ultras]

Thanks Man! Great video. My dryer is all fixed up.

[@theworldhadteeth]

Anthony Barton You are welcome sir! I'm glad to help.

[@mochans]

Thank you. This was the exact video I was searching for. Great job!!

[@theworldhadteeth]

Mochan, you are welcome. Glad I could help.

[@pauled4467]

Great vid. saved me a lot of hassle.

[@theworldhadteeth]

Glad I could help!

[@dtliu123]

Thank you. Save my day. Your instruction was right on.

[@theworldhadteeth]

+David Liu You are welcome David!

[@carprock2009]

Really useful. Thanks. One thing I was wondering. If you were to tip the dryer sideways could you access the screws for the baffle from the underside of the dryer? Or is that access blocked?

[@theworldhadteeth]

Justin Watkins there wouldn't be good access from the bottom. There are other components in the way. Quicker and easier to just raise the house.

[@billiebenefield6020]

Loved ur video, but I do have a question please. I have an electric Maytag dependable care dryer(used) with the filter is hat pulls out of the top. The drum is metal with transparent plastic baffles that are FULL of lint. Can I remove them clean out the lint and put them back on using the same instructions on it video - even though it's made a little different than this one? Any advice u can give me would be greatly appreciated.

[@theworldhadteeth]

+Billie Benefield I don't know that model, but if you can remove them, then you should be able to clean them and put them back on.

[@jayvance2780]

Ditto. Thanks. Just what I needed!

[@theworldhadteeth]

Yessir! Glad to help!

[@ilovelucyismylife]

Exactly what I needed to know! Thank you!

[@theworldhadteeth]

You are welcome Brenda! Glad I could help!

[@ilovelucyismylife]

Well my loose squeaky baffle finally came all the way off on one side, so I pulled your video right up and fixed it myself :)

[@lcruz1544]

Excellent video, thank you very much!

[@theworldhadteeth]

Yessir! Glad I could help!

[@youspoppa]

Now that I've learned what 'wallered out' means (I had to look it up -- we talk funny up North), I'm gonna buy me a Black & Decker FireStorm 24v set and grow me a beard (and maybe join a metal band ...). Thanks for helping this 'ol Yankee save money and avoid a service call!

[@scottsmith3848]

10 minute fix thank you for the video !!

[@laurafrank7527]

Thanks so much! Huge help...all fixed

[@theworldhadteeth]

Laura Frank You are welcome! Glad to help!

[@nadiaramnath187]

would you know how to convert this model into a propane lp conversion? great work on this video btw

[@theworldhadteeth]

+Nadia Ramnath Sorry Nadia, I haven't attempted that before. Good luck!

[@MrRamman04]

Thanks for the video, saved me some time

[@theworldhadteeth]

+MrRamman04 You are welcome sir!

[@MontyDahlberg]

Thanks for the informative video! I have a question I'm hoping you can answer. I believe I have a very similar model. The label says it's a MDE6200AYW. When I got it it was missing a baffle. I checked a parts diagram and it listed a short and a tall one. The two I had were the same size, so I took a guess and ordered a tall. The part I got is the same size as the two that are already installed. Does your dryer have 1 shorter baffle or are they all the same size?

[@theworldhadteeth]

Monty, mine were all the same. However, I no longer own this dryer. I now have a new set of Maytags.

[@paneofrealitychannel8204]

Thanks bro. Big thumbs up.

[@theworldhadteeth]

You're welcome! Any time man!

[@ynotw57]

Awesome! Thanks for the video!

[@theworldhadteeth]

You're welcome! Glad it helped!

[@tacticalhomegrown]

Thanks for the video. I of course waited until it's flopping badly.

[@theworldhadteeth]

You are welcome! Glad I could help!

[@algrace2556]

Excellent instruction!

[@259adh]

Great instructions - thanks!

[@theworldhadteeth]

Alan Higgins You are welcome sir!

[@galaide]

Thank you so much

[@theworldhadteeth]

Yessir! glad I could help!

[@moviefreak382]

Just fixed my dryer! Yeah!!!

[@theworldhadteeth]

Awesome! I'm glad to be of service!

[@Numinousone]

You just saved us some $$$, thank you!!!!

[@theworldhadteeth]

Numinousone You are welcome! Glad I could help!

[@brocpachesa4698]

On point. Thanks so much

[@theworldhadteeth]

Broc Pachesa You are welcome sir! Glad I could help!

[@carlthewinner]

You are rad! Thanks! Very helpful!

[@theworldhadteeth]

You are welcome sir!