Maytag Washing Machine Not Spinning The Clothes

[@mistermattgraves]

My washer wouldn't spin and I saw lots of information about replacing belts, bearings, etc. but none of them really explained how to tell if those were actually the problem. This was the only video that I found for actually troubleshooting to see what the problem is. It was a sock wedged between the inner and outer tubs. Thanks for saving me a bunch of wasted time and money!

[@narmando69]

Your maytag video on how to change from 3 post to four post on a drier was very helpful! Thank god for people like you, peoplewho dont mind helping those who look for instruction. My thumbs up top you!

[@atny69]

Great video. You just saved me hundreds of dollars towards a new washer. I followed your instructions and wound a sock stuck in the outside drum. Took me 1/2 hour to fix. Thanks a lot

[@Whodamanimal]

Angel, You helped me fix my washer. You are the MAN! Also, your videos are very direct and informative. Thank you!

[@theapplianceman]

Thanks for watching my videos. Check my website and pass the link to family and friends. Here is the link www.do-it-yourself-washing-machine-and-dryer-repair-help.com/ Angel theapplianceman

[@chuckles0692]

I wish I had seen this first!! I went out and bought new belts, but by machine was draining just fine- turns out a sock was jamming it from spinning! Thank you!

[@alankilbarger9101]

Your video was very helpful. My washer is a littler different than the one in the video but I was able to use the example you showed to get my washer working again. There was a sock that was stuck that was not allowing the drum to rotate. Your video and explanation showed me enough to know what to look for during my troubleshooting and locate and remove the sock. Glad you video came up early when I was trying to get an idea of what to do. My repair took about an hour by the time I got it all back together again and cleaned up.

[@theapplianceman]

Thanks for the comment Here is the link to my channel in case you want to subscribe of pass it to friends or family kzbin.info/door/eO4F41uVUYsfMRW42D8f0g?view_as=subscriber Theapplianceman

[@theapplianceman]

check this video you may have a bad basket block is about 39 minutes on the video kzbin.info/www/bejne/i4eXpKypnq1-aa8

[@berkaka]

Thanks for the video. You just helped me fix my first washer!

[@JohnsonJLB]

Great video! I did the first thing you said to to do and checked for clothing stuck at the top of the bowl and viola! Washer spins again! Much cheaper repair than having a Maytag professional come out for $80.00 to $150.00 and possibly just analyze what the issue could be.

[@badsirivan]

Upon removing the top cover from the spin drum/tub, I discovered the gasket around the top of the tub had partially separated from the tub and may have been the obstruction between the tub and spin drum. It appears that it was only held in place by an adhesive as it won't just slip or snap back into place. What type of adhesive should I use to put the gasket back in place? Will it be any problem if I just remove the gasket completely?

[@whtchoc1231]

Your videos are very informative, I have a question though. My washer makes a whirling noise only while in spin cycle. Would you happen to know what that may be? I'm assuming some kind of bearing. I have a maytag model # hav2557aww. If you could get back to me I would appreciate it very much.

[@Sparty1966grad]

Hi, appreciate the video and see you are still responding to questions. My daughter has a Maytag A512S washer. It fills and agitates fine but when it hits the spin cycle it squeals. I replaced both belts at the bottom. Unfortunately I haven't checked for the possible stuck piece of clothing as I hadn't seen your video yet. She lives about 90 minutes away so before I return back, I want to make sure I know what else to look for. Thanks

[@theapplianceman]

check this video kzbin.info/www/bejne/oaTRf6yPZt6eh8U

[@donpickett202]

i have a maytag ensignia washer that doesnt spin but it will agitate and the drain pump works fine. i ll be glad to donate if you have an answer , thanks dp

[@renatomartinez4808]

Hi there ...I change the timer and the motor is working good...what else can be ..that my washer machine is not working at all

[@icemancometh8679]

I have a maytag A310 washing machine. It agitates fine, but kicks the motor off when it goes to spin.

[@Bettebet79]

Hi. Will a washer agitate if it has no water in it? My Maytag Spins in Delicate and Wrinkle mode but not in Regular. It doesn't seem to agitate in any mode (but is that because there is no water in it ? ) Thanks

[@theapplianceman]

need the model number to see what you have for a washer

[@Bettebet79]

@@theapplianceman mavt446aww

[@Bettebet79]

After it fills with water It won't advance to wash cycle.

[@theapplianceman]

@@Bettebet79 It is hard to tell without seeing the washer working Check this link on youtube to see if you could find a video that may help. kzbin.info?search_query=mavt446aww%EF%BB%BF angel Read more

[@Bettebet79]

@@theapplianceman HAVT446AWW REV 27 Serial# 27572565JJ

[@jamesokeefe708]

My Maytag washer pounds during spin cycle startup gets faster and faster then finally goes away any information would help what I'm looking for it's and older model machine

[@tavious31659]

THANK YOU !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@Flightstar]

How do you remove the front panel. It looks like it comes off but I don't see any screws. My 1997 Maytag makes a horrible noise when its trying to spin up

[@charlitawhite]

Any luck

[@oldmanhobbies9554]

@@charlitawhite I have an older model. Everything I found said there are clips at the top of the front panel and to use a putty knife to push them in to release the front from the top. That never worked for me. On my model, I was able to pull the bottom of the front panel forward (towards me) and then it came loose. I use screwdriver on each side, about an inch from the bottom to pry the bottom open. Maybe that will work for you.

[@HrusikeshPanda1]

Where can I find how to build the test cord?

[@HrusikeshPanda1]

Found it kzbin.info/www/bejne/ZpiWoqxjgK95nK8. Thanks for all your tutorials!

[@SuperDagod1]

What if the washer won't spin when set on a normal wash cycle. But it will spin if you just go right to the spin cycle? Hmmmm Thanks