Mazda BT-50/Ford Ranger Fuel Filter Replacement

[@jasondaly4915]

Was as easy as you show in your video thanks heaps 👍

[@neildavies43]

Excellent video - very informative and concise.

[@thebordercrossing]

Good instructional video mate, cheers.

[@lyndonbushnell8080]

Thank you for the great video, worked a treat.

[@UTPP]

Nice job mate, cheers.

[@stevedriver1476]

GOOD stuff,,you saved me,,,, i think these are pretty good engines,, it flys for a diesel...i like it,,,

[@Rednuts351]

Thanks champ.

[@MotortechVehiclerepairs]

Please subscribe

[@darkking86]

Thank you, it helped me a lot

[@high_lyfe8546]

Thanks helped me out alot

[@bajan246bim]

Plan on making more videos like brakes..oil...transmission fluid

[@michaelunison7607]

Exactly the help I needed as am servicing 2011 BT50. And got the fuel fiter, but was a bit blind about the correct way to do it. I have always been told to undo the negative battery terminal before doing work like that, and I think that is good advice. I would like to know if there is fuel pressure . It didn't look like there is when you undid those fuel lines? Must only be in petrol vehicles that have the pressure in line? I'm not that clued up when it comes to Diesel. But have been told it's really important to change the fuel filters often, so thanks again for doing the video.

[@RoyerRogers545]

Did you do the Fuel injection pump inlet filter as well?

[@tubedinoz]

Great video. Out of interest, what is the function of the sensor at the bottom of the fuel filter? Does it pick up if the filter needs replacing?

[@MotortechVehiclerepairs]

It’s a water sensor

[@tubedinoz]

@@MotortechVehiclerepairs brilliant. Thanks for that. Cheers

[@Phumiphat.M]

thank you very much. ขอบคุณครับ

[@victorcolle22]

Do you know where the cabin filter is located on a bt50 year 2007?

[@oldmategregoryjohnthe3rd6]

There is none i dont think

[@camtiran129]

Hi all. does anyone know where the inertia switch for the Ranger 3.0tdci sits. cant find it. beginning to wonder if it has one or been bypassed.

[@mh2288]

Can I use brake cleaner to clean the sensor?

[@MotortechVehiclerepairs]

Mick Haych yes brake cleaner is fine.

[@mh2288]

Thanks!

[@lorissasavea333]

Hey bro i got bt50 2010 it's so hard to start do you think i need to change diesel fuel filter or diesel pump pls?

[@MotortechVehiclerepairs]

Lorissa Savea have you checked or tested your glow plugs?

[@hungrynapps]

These trucks are slow .. what safe mods for more power.. especially with the WL engine

[@thicc800ty]

Change the turbo and the intercooler