MAZDARATI Fake Engine sounds using REVHEADZ app + OBDII WIFI scanner

I bought a $6 wifi OBDII diagnostic scanner for my Mazda.
New ELM 327 V1.5 WIFI OBD2 WIFI Scanner Auto ODB2 ELM327 V1.5 WIFI For Android/IOS OBD 2 OBD2 Car Diagnostic Auto Tool
I download the free REVHEADZ mobile app
My iphone XR connects to the scanner using wifi
My iphone XR connects to my Mazdas multimedia system using an Apple usb to lightening cable OR a 3.5mm audio cable and lightening adapter. Do NOT use Bluetooth as this has a noticeable audio delay!
Now the revheadz app knows exactly what speed, gear and RPM my Mazda is doing. So i can select different cars in the app and the engine sound comes straight out from my cars audio sound system.
Yes you will drive faster
Yes you will use more fuel
Yes you will get speeding tickets
But you dont have to buy a sports car. With the money you just saved you can buy all the optional sound packs!
There is a slight delay due to the bluetooth audio. But works perfectly if i use a 3.5mm audio cable.
Link in 2022
www.aliexpress.com/item/10050...
Link in 2023
Just found this amazing item on AliExpress. Check it out! AU$4.65 15％ Off | 2023 ELM 327 V1.5 WIFI OBD2 WIFI Scanner Auto ODB2 ELM327 V1.5 WIFI For Android/IOS OBD 2 OBD2 Car Diagnostic Auto Tool
a.aliexpress.com/_EwYYdyX

[@Stygende]

my favourite part was watching him try and plug it in

[@inzp3ctor]

The struggle was real haha

[@emreemreps]

HAHAHAHHA

[@blackcomet4762]

Yep hahaha

[@Aurosai]

1:13

[@youtouber]

Thanks. I got mine just today but unable to connect it to the app. I see you managed to connect without changing the host and port information but by merely trying it the second time? Is the connection on your phone DHCP or Static?

[@inzp3ctor]

Connection was dhcp. Yes I just tried again a second time and it worked

[@wilmaolsson7012]

Hello, nice video. Mine is a bit laggy like yours at 3:40 . Is it just when your car is still and u rev it? Maybe it is better when you start driving… and mine is so delayed, is it maybe because I use Bluetooth?? Thank you

[@inzp3ctor]

mine was delayed when i used bluetooth audio. when i switched to 3.5mm audio cable there was no more delay

[@wilmaolsson7012]

@@inzp3ctor okay, but the problem is that I don’t have like an AUX port in my car, so I can’t use a cable

[@SuzukiGsxr7500]

Which one best for less delay? BT or Wifi OBD2? I will connect with 3.5mm jack.

[@inzp3ctor]

Would both be the same. The problem is not the car to your phone causing delay. The problem is the phones audio to your cars speakers/multimedia

[@ayrtonsenna6263]

What’s the difference from your OBD and the one you buy at the oficial web from them?

[@inzp3ctor]

An expensive unit reads the codes and clears the codes. With these phone interfaces the device is just doing the connectivity. Then it depends on the application on your phone to determine what you can actually do. A mechanic doesn’t buy a phone app. They use dedicated all in one scanners

[@afan64]

Can you just use any plain old OBD 2 diagnostic adapter (that has wifi)?

[@inzp3ctor]

yes. wifi or bluetooth to the phone is fine. from the phone to the car use a cable otherwise you will introduce a delay most likely due to the nature of audio timing over bluetooth

[@LawrenceTimme]

Lol. Hybrid needs this in the prius

[@inzp3ctor]

Haha yes! His car is way too quiet! I wonder how a hybrid would react with this? If the engine is off do you even have rpm data? And when the engine is on I think the transmission is CVT anyway. I guess I am lucky my Mazda has a 6 speed transmission so I can do this. Some CVT have stepped “fake gears” such as Subaru but I doubt this is the case for super efficient Toyotas.

[@LawrenceTimme]

@@inzp3ctor are yes. In the newer Subaru's they have ditched the fake fears for the CVT thankfully

[@Fabio-lk6ne]

the sound in the long run seems original or not?

[@inzp3ctor]

I used the video editing software to make the audio from the phone match the video from my cars dashcam. Otherwise there is a huge delay when using Bluetooth. You can remove the delay by using a 3.5mm audio cable

[@hughjazz7229]

Hi I'm planning to buy t his obd. Is it called ELM? And will it work on an Android?

[@inzp3ctor]

Check the description for the name and link to the one I bought. ELM looks to be correct. The wifi one. Yes android works. Connect phone to car using 3.5mm audio cable. If you use Bluetooth there is a significant delay

[@alexanderbeha8170]

What can i do? I tryed this but my app says RPM not supportet. What does that mean and what can i do?

[@inzp3ctor]

What app did you download? What car do you have? What phone are you using? Which scanner did you buy? Can you make a video?

[@muradhasanli5356]

@@inzp3ctorhello, I have the same issue could you please help me? I drive nissan teana 2010, used ELM327 kingbolen wifi, and it says cant query rpm on revheadz, i tried quite a lot of apps all of them worked. Only revheadz doesn’t :(

[@inzp3ctor]

@@muradhasanli5356 sorry i dont have that scanner. i purchased the cheapest scanner on AliExpress as per my video and the description

[@wilmaolsson7012]

Is it more delay if I use Bluetooth instead of cable?

[@inzp3ctor]

yes bluetooth audio introduces a delay that does not exist if you wire your phones audio to your car

[@akhileshchouhan4644]

Is it connect with (Swift vxi 2006) Actually I buy (obd || elm327) And it is not connecting with revheadz Is it connect Tell me bro iam waiting for your reply

[@inzp3ctor]

Did you buy ELM327 wifi or Bluetooth? What phone do you have?

[@akhileshchouhan4644]

@@inzp3ctor bluetooth

[@theevolutiongamer5588]

Can someone help me i have a citroen c1 2011 when i try to connect it says rpm or speed not supported

[@inzp3ctor]

Goodluck, hopefully someone here will know

[@sam_b_dubbs]

Connects but rpm stays at 0 . Any thoughts?

[@inzp3ctor]

Which scanner did you buy? What phone are you using?

[@sam_b_dubbs]

@@inzp3ctor bought a pocket boots. And have an iPhone 13 Pro max

[@mickey-tl3mh]

​@@sam_b_dubbs they don't work with iphs in most cases, any obds doesn't work with apple

[@sam_b_dubbs]

@@mickey-tl3mh ah right thanks, Will try with android and get back to you

[@Abdul-mh5zh]

I have Autel AP200 Bluetooth OBD2 Scanner tried to connect it via Bluetooth but didn't work... Should I get a wifi obd2 scanner?

[@inzp3ctor]

What phone do you have? Is it up to date?

[@Abdul-mh5zh]

@@inzp3ctor I have Samsung s23, and when I try to connect it it's saying this: 0.00 RevHeadz (Android) Version: 1.28, Build: 55 0.00 Connecting to Bluetooth OBD-II adapter 2.62 Connected 4.62 No command prompt received. sending initial command 4.62 SEND:AT Z

[@inzp3ctor]

@@Abdul-mh5zh you have a different scanner and a different phone. I used an iPhone with a wifi scanner. Very easy to connect

[@Abdul-mh5zh]

@@inzp3ctor I probably should try a different obd2 scanner. Thank you very much!

[@marcelofernandez308]

The wifi signal from my adapter is to weak and I am connected to iPhone 14 what can I do to fix it?

[@inzp3ctor]

im using iphone XR and the adapater i am using is in my video and in the comments, goodluck!

[@Unknown-uy6mj]

mines always stops halfway and then disconnects, what am k doing wrong or what can i do?

[@inzp3ctor]

Which scanner did you buy? What phone?

[@Unknown-uy6mj]

@@inzp3ctor elm 327 im pretty sure, and i have an iphone 8. not sure if its the phone scanner or maybe the car.

[@Gxro_Bo2]

OBD2 Scanner WiFi Car Engine Fault Code Reader Reset Adapter for iPhone iOS Android Windows, (((😢 does this work? bc i ordered

[@inzp3ctor]

In the description you will see what I ordered. Scroll right down. Goodluck

[@Gxro_Bo2]

work for me but the blutooth signal and wifi are slow while driwing@@inzp3ctor

[@fishingsa.com132]

So you don't need to use a cable beacuse some vids say you need to use a cable?

[@inzp3ctor]

You need a cable 3.5mm audio auxiliary or iPhone cable. Because if you use Bluetooth, there will be a significant delay.

[@Ydv_tech]

Any obd can work with that??

[@inzp3ctor]

Any OBDII car

[@forzaclips117]

I’ve tried connecting it. It says it’s connected then doesn’t work

[@smokey4049]

What car you got?

[@inzp3ctor]

What scanner did you buy? What phone do you have?

[@richbrat_2294]

How do i buy this product as i am from india

[@inzp3ctor]

You can buy an OBDII scanner from AliExpress. My recommendation is that the phone be hardwired to the cars audio so there is no delay. The Bluetooth scanner is cheaper than the wifi scanner so maybe get that one

[@lukematesic5276]

I connect mine to wifi, then I press drive and it just disconnects every time

[@inzp3ctor]

Which one did you buy? What phone do you have?

[@alikdouh369]

I have a i phone x I have got aux plugged in and on my wifi is on and then went to the app and pressed Wi-Fi its doesn't let me connect these is no green light on the obd adapter how can I fix it

[@alikdouh369]

I bought a obd revking

[@ilyassff5980]

Bro how i can buy it ???

[@inzp3ctor]

Check description Just found this amazing item on AliExpress. Check it out! AU$4.65 15％ Off | 2023 ELM 327 V1.5 WIFI OBD2 WIFI Scanner Auto ODB2 ELM327 V1.5 WIFI For Android/IOS OBD 2 OBD2 Car Diagnostic Auto Tool a.aliexpress.com/_EwYYdyX

[@kevinfalkowski9638]

Please link this product

[@inzp3ctor]

I don’t recommend this wifi scanner product as there is too much delay using Bluetooth to connect to the cars audio system. I recommended buying a cheaper Bluetooth scanner and connecting to the car using 3.5mm audio jack

[@inzp3ctor]

AU $6.81 1％ Off | New ELM 327 V1.5 WIFI OBD2 WIFI Scanner Auto ODB2 ELM327 V1.5 WIFI For Android/IOS OBD 2 OBD2 Car Diagnostic Auto Tool a.aliexpress.com/_mKgzz18

[@famousclipseveryday]

@@inzp3ctor would it work when i connect my iphone not per aux but with the standard lightning connector for the audio??

[@inzp3ctor]

@@famousclipseveryday yes that would work without the delay as you are not using Bluetooth audio

[@famousclipseveryday]

@@inzp3ctor so the obd adapter finally came (bluetooth). But when i synced it and try to get some sounds nothing happens, only when i change the simulation style to only RPM, and there the audio is super laggy and not on time, even though i am connected via ligghtning cable. would be nice if you could help me!

[@flyburundiexe1509]

Have u got delay on it?

[@inzp3ctor]

Yes with Bluetooth I have a very noticeable delay. When I use the apple adapter (lightning to 3.5mm audio) then I have no delay. So instead of buying the wifi version I should have got the cheap Bluetooth version because you have to use audio cable anyway to eliminate the delay

[@kieranfuller5511]

Is this an aux cord from phone to Car when you talk about the above? Or is there some rare OBD port connector with these aux ports on them lol?

[@inzp3ctor]

@@kieranfuller5511 yes you are correct aux cable if using android or iPhone SE. No other iPhone uses 3.5mm stereo jack which is why I mentioned the apple adapter. Lightning to 3.5mm stereo female adapter cable.

[@youtouber]

Damn. I already have a Bluetooth verison and just got myself the wifi version to eliminate delay. Too bad the wifi doesn't even connect and isn't returnable. 😢

[@elpiXel21]

Mine doesnt connect by wifi, any idea?

[@inzp3ctor]

Unplug it and try again. Mine didn’t Work first time properly either. If you watch the video again you’ll see I had no data transmission until I tried a second time

[@Vikingo_Blanco_]

Work with a PHEV?

[@inzp3ctor]

Yes as the engine has RPM it will work

[@69lol69]

Does anyone sound realistic?

[@inzp3ctor]

Well yes and no. Video games sound great but they all sound fake because it’s always the same tone all the time. But in a real car you have variables. Engine temp. Exhaust temp. Car speed. Road noise. All these variables change what we really hear when we really drive. You don’t get any variable when using a simulator like this. I guess the deeper sounds are slightly more authentic. I enjoy the V8