MB200 with a Tillotson 212 can we make it faster?

MB200 with a Tillotson 212 can we make it faster?
Advanced the timing, added a .010 head gasket, and tried a couple different slide carburetors on the stage 1 Tiootson 212-powered MB200 to see if we could make the bike any quicker and faster.
212 Ghost kart racing engine playlist - • 212 Ghost VS 206 Brigg...
Mega moto e-bike playlist - • Raced the QS120 e-bike...
Predator 224 playlist - • Predator 224 gets a 26...
Mega moto performance playlist - • Mega Moto 80/105 unbox...
Bonanza minibike playlist - • 1.3 ratio rockers vers...
Coleman cc100x Predator 212 playlist - • Free Predator 212 perf...
Road rebel go kart playlist - • Kart vs scare chair / ...
Coleman cc100x/DB003 minibike micro bike playlist - • Will a Trumpet exhaust...
Coleman cc100x playlist - • Coleman CC100x Minibik...
Doodlebug playlist - • Is the Doodlebug minib...
Coleman CT200U-EX playlist - • Coleman CT200U EX mini...
Azusa minibike playlist - • Is a Ghost faster with...
Coleman CT200U playlist - • Coleman CT200U minibik...
Predator /Tillotson playlist - • Free Predator 212 perf...
Minibike playlist - • Mega Moto 212 goes 60 ...
Subscribe for more minibike content: kzbin.infofea...
Instagram - Doubledown555Black66
__________________________________________________________________________
Parts used -
VM22 carburetor - www.ebay.com/itm/194358544642
.010 head gasket - www.ebay.com/itm/125043479739
Timing key - www.ebay.com/itm/133022580051
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

[@wesleyammon8425]

Awesome job on the trailmaster mb200-2, I have one myself, 12in shocks, 60T sprocket, tork-zilla super 30 series driver from OMB, predator non hemi 212cc, with billet rod and flywheel, hot265 cam, 26lb valve springs, vm22 with a 140 jet, (my elevation is 1750) and a thin head gasket, and I've gone about 50mph at about 6200 rpms. Can't wait to see what you do with this bike.

[@danwelshinger1136]

thanks again 66 your the guru of minibikes

[@WyFoster]

Beautiful bike, to the owner I'd recommend some Sunf A021 tires for road use, and an RLV muffler to quiet it down and pick up a little power. Definitely recommend the front brake kit from GPS if you're riding this thing on the street. Never know when someone might pull out infront of you.

[@Black66]

Yes for sure ! All that stuff would definitely help out his bike!

[@TheDonkDonk420]

street tires are a must for road use. And that RLV muffler will give it some extra torque for top speed

[@Black66]

@@TheDonkDonk420 The RLV mufflrer will give you more speed like in this video..,.kzbin.info/www/bejne/roPSfYeeg7lnpKc

[@Tyresong]

I'm glad you did the VM22 comparisons... after RedBeard did it on his dyno, I was surprised but wondered if maybe it was an actual tuning/mixture thing, You just confirmed that the cheaper Chinese version is just as good if not better for performance. So it really comes down to reliability V having a spare carby tucked into the tool kit

[@lucassarchet6712]

Just recently, I've decided to try a couple of the knock off vm22 carbs. I will try the other one on a mild 212 this weekend. The one I put on my Briggs 5hp mild build fired right up and ran amazing out if the box. I was pretty shocked. Here in Colorado I usually have to do some jets and adjusting even in my flatslides. Definitely a pleasant surprise.

[@Minibike-Isaac]

Man I miss colorado lol

[@NVScrapper]

Another great video! I love that you made the comparisons on all 3 carbs. Keep up the great content! 💯

[@rogerrose8220]

Excellent info again! Thank you, sir!

[@Black66]

Thanks for watching !!

[@grampysgarage7527]

Sweet bike. I've also found the chikuni to perform a little better than the real Mikuni.

[@johnk6346]

Great video🤠

[@Black66]

Thanks 😁

[@spikemandan]

Ohh that's the one you're telling me you were so busy with

[@nathanielfisher4269]

Put a 440 duromax in it , and change the gearing, add a cam.

[@gemsynrc9605]

Super nice bike, hate to know what you have in it at this point.

[@FreeRunMonster802]

Yes! Happy to see the big bikes in the channel again. What's the rear sprocket on this guy? Went to a 40 rear on my baja, with a torque converter it does 50.

[@Black66]

This one has the stock gearing for now.

[@mikesbarn1858]

To really take advantage of the advanced timing I really think you need a hot 265 cam.

[@Sinmatic1981]

Wow

[@williampippin9480]

Put a 12 tooth on the jackshaft and a 50 on the rear should hit about 62 with that set up that’s what im running and I hit 65 before but maintain a steady top speed of about 61-62

[@Stingyduce]

Yes you can right now I’m around that same and I’m only on gx160 on 22 pound spring with few other mods

[@jandujar4114]

Love the fuel tank… will fit a mm212? And where can I buy one?

[@miguelpagansr6128]

Nice build indeed, is it possible to run both the kill switch on the bar and the one on the engine? I figured for extra security and keep curious people away, thanks.looks like the only thing holding it back is the gearing.

[@Black66]

Yes it is.

[@WyFoster]

You can tie in the handle bar kill switch to what used to be the oil level sensor. Very easy.

[@miguelpagansr6128]

@@WyFoster thank you sir I appreciate the advice.

[@srcobra50]

That’s a really cool bike. I have a Hurricane mb200 do you have a link for that tank?

[@mkuhlman77]

I think billet flywheel would have given advancement to timing also. Since governor deleted that's what I would have tried first.

[@Black66]

Yes a billet wheel would have added timing but I was trying to do the mods inexpensively

[@mkuhlman77]

@@Black66 totally understand.

[@tigattac]

@@Black66 Thank you for the hands on testing you do. I like the idea to do all the free mods that is possible to an engine first, before it begin to cost to much. Like, a washer under the springs, some porting and upping the comp. Easy to do, and make it com alive. The cam seems to be okay, pulls nice at that rpm. Best regards

[@imoveatgodspeedwakeup5665]

Change sprocket and clutch...and run one chain

[@Black66]

Like in this video? kzbin.info/www/bejne/l6fHe3hpadN5f7c

[@sonicsr20]

What jet is being ran in the clone vm22?

[@marquislewis1767]

Curious to know as well

[@marquislewis1767]

What am i doing wrong or is it size? Im 6’0” 240 lbs. i just installed a new tilly on a rb200. I have the same stage one kit from GPS. Also have a torque converter. Im only able to get a top speed of 39.99(40 lol). Your baseline was 46+. What gives? Will removing the governor completely give me that much more speed? I hear so much about how removing the governor isnt safe…or is that a predator thing only?

[@julianbloedow9164]

It won’t be a issue if you have a aluminum or billet flywheel. Also just make sure to open to case and remove the internal governor

[@mini0448]

Needs a 301