KEL-TEC PMR-30 All In One Bundle - Custom KEL TEC PMR 30 Upgrades & PMR 30 Accessories by M*CARBO!

NEW 2021 KEL-TEC PMR-30 ALL IN ONE BUNDLE VIDEO: • KEL-TEC PMR-30 All In ...
KEL-TEC PMR-30 / CMR-30 / CP33 Flat Trigger for Custom KEL TEC PMR 30 Upgrades that Deliver Immediate Results! American Made KEL TEC PMR 30 Accessories to Increase Performance from M*CARBO!
Corrects KEL-TEC PMR-30 Problems with Plastic Factory Parts! Custom KEL TEC CP33 Accessories for Competition Level Performance! Best KEL TEC CP33 Aftermarket Parts to give you a Competitive Edge! Aluminum KEL TEC CP33 Upgrades to Replace Plastic Parts! Custom PMR 30 Accessories for Best Possible Performance Available! Best KEL-TEC PMR-30 Aftermarket Parts to Improve Reliability and Performance!
Flat Trigger Upgrade for KEL TEC CMR 30 Accessories! Custom KEL TEC CMR 30 Upgrades for Increased Performance!
KEL-TEC PMR-30 Stainless Steel Feed Ramp will correct common KEL TEC PMR 30 Problems with constant Failure to Feed Malfunctions. If you could only do one of our KEL TEC PMR 30 Upgrades than I would recommend you go with this one as it will completely transform this pistol.
Custom KEL TEC PMR 30 Accessories to Improve Overall Performance and Reliability! Performance Driven KEL-TEC PMR-30 Aftermarket Parts for Immediate Results! Fixes common KEL-TEC PMR-30 Problems! Best KEL-TEC PMR-30 Upgrades for Lifetime Performance! Best KEL TEC PMR 30 Modifications for Immediate Results! Watch our KEL TEC PMR 30 Disassembly and Reassembly Video. Immediate KEL TEC PMR 30 Reliability Improvement! Custom KEL TEC PMR 30 Parts by Combat Veterans Made Here In America! KEL-TEC PMR-30 Enhanced Magazine Release seats the KEL TEC PMR 30 Magazine higher inside firearm to help Improve Feeding Operations. Custom KEL TEC PMR 30 Upgrades to correct common KEL TEC PMR 30 Problems.
TIMECODES:
Intro - 00:00
Parts Overview - 01:05
Tools Needed - 06:08
Takedown - 07:08
Prying Apart the Frame - 11:42
Installing the Mag Release - 13:31
Feed Ramp Polishing - 19:58
Replacing the Feed Ramp - 25:57
Trigger Replacement - 29:42
Putting Frame back Together - 34:26
Testing/Adjusting Pre-Travel and Over-Travel - 37:38
Reassembling Frame - 40:24
Replacing Recoil Spring - 46:25
Reattaching the Slide - 51:23
Function Check/Dead Trigger - 51:48
Live Fire Demo/Wrap Up - 55:37

[@MCARBO]

NEW 2021 PMR-30 BUNDLE VIDEO HERE! kzbin.info/www/bejne/lV6ylYWDZqqokLc

[@brianivey7749]

I just fired mine after the upgrade, and let me tell you, it is worth it. it was finally a joy to shoot, with out ANY issues. I would actually consider it for conceal carry with the 30 rounds, that's a lot of stopping power there. Thanks you MCARBO.

[@notimeforjokes.3570]

Good deal

[@47Edge]

Very well done! Clear and easy to understand with no stupid music. An outstanding video that shows the quality of your products!

[@tdh72]

amen to no stupid music and Graphic distractions!

[@barryreid2086]

Thanks for saving my sanity. Traded for one of these and couldn't even feed first round. The reason, the buffer was so melted, it was jammed all through the slide. Ordered the all-in-one kit from MCarbo, and 10 buffers from KelTec. Can't wait to see how this thing runs when I get everything replaced. Thought I had just traded for a lemon, now I know I'll be able to make lemonade.

[@-Agent_47_]

Did you get it already? If so how the functionality of it? Would you ever consider it for self defense? And is this worth the price?

[@SgtRudySmithbRet]

Just completed my install , and I'm impressed! 4 mags and ZERO malfunctions. Time to order one for my CMR30.

[@leoashmore1971]

A new and improved buffer would be greatly appreciated.

[@robertallen1665]

Amen to that!!

[@rogerl8488]

Yes!!!!

[@matthewmramor5981]

Icing on the cake!

[@QuantumPyrite_88.9]

A 4 axis CNC machine and software is 30 feet behind me .

[@DA-zh9gi]

Nice two stage would be cool. Mini armaspec type...

[@levmarcus8198]

Thank you so much for including an extra tiny piece of wire in the new recoil springs. At the last second mine bounced off my thumb and was lost to my floor for eternity. I spent about 10 minutes looking around and using a magnet to try and find it. When I returned to my desk I found the newly included wire in the bag. Awesome job guys! Thanks for thinking ahead.

[@13letsgoredwings]

Do The Buffer! You went this far Chris, now take it to the end zone! I just installed the feed ramps and mag releases on my pmr/cmr and they are works of art.

[@23bdubballa]

ok so it does work for Both, Thanks for that info , I didn't see it offered for the CMR knowing that it was the same weapon but i wasn't sure

[@BrassCatcher]

Enhanced recoil spring for the cp33! I would even settle for a forward assist! Thanks for the feed ramp, you’ve earned a repeat customer.

[@stormtrooper88]

the overtravel screw...have the threaded hole completely thru the trigger so it can be adjusted from the front so you don't have to disassemble the weapon to adjust it.

[@lexingtongreene400]

Love the excellent video that "fully" demonstrates the upgrade process. I have a PMR-30 which has been fine but can say this would be a huge plus to its operation and enjoyment. Haven't melted the buffer as I don't high speed it. WMR isn't the cheapest round, but the buffer enhancement and the replacement spring retainer in the kit make sense. I will shortly be buying one of THESE upgrade bundles FOR SURE!

[@therajuncajun6487]

Dayum! That speed dump was exhilarating! I definitely want to buy one and get all of those enhancements to install!

[@pwrplnt1975]

I still can't believe Kel-Tec put a plastic feed ramp on the PMR 30. What a great bundle you guys put together! Great Video as well!

[@jerryburcham3370]

This video made it extremely easy to install this upgrade. I really like the feel and smooth operation of my PMR 30. I will be on the lookout for other upgrades in the future.

[@SouthernShodan]

Looks good. Thank you for the detailed installation steps. Just ordered a kit from you.

[@Khaymen223]

As a machinist who does alot of finishing, I can verify that doing finish dremel polish work is relaxing. I start to nod off sometimes at work lol

[@danswalledin5829]

Did all upgrades as directed in video. First mag had one stove pipe. Second had zero. Thank you MCARBO! For the first time in a few years that gun is finally fun.

[@DA-zh9gi]

I can tell you've done this a gazillion times. Nice job. Much appreciated on the tips and details.

[@robertovillarreal8602]

Just what the doctor ordered!I need 2 sets.Who knew.👌

[@kenjohnson3412]

We need a improved buffer!!!

[@phyuckyiu7685]

The upgrade is awesome, love this pistol now! Installed in October 2020!! Thanks MCarbo! And Ya-Huh please on a new buffer!!

[@johnceglarski9460]

Great job on the video. The lighting, views, and sequence explanation are beautiful. Especially the slide stop. I had trouble after I got both sides reassembled but noticed SOMETHING wasn't right. The slide stop had come off its base and it is very hard to realize without seeing the explanation/lesson you have here. Thanks again.

[@chrisrock4428]

This is so awesome. I've been wanting a PMR 30 but reviews had me on the fence. This seals the deal.

[@michaelwilson6743]

I have one an conceal it i love mine !!

[@CLP2102]

Buy one and this kit, mines awesome

[@joehelvey5794]

I’m in, thanks fellas

[@fredhoward5962]

Yes, yes, yes on the non-melting buffer. Also, I know you only need it once (hopefully), but an improved spring retainer for the recoil springs would sure be nice and not that big a deal!!!

[@mfholz]

Using KZbin to repair or maintain just about everything from clothes washers to firearms. You are by far the best on showing and explaining what’s going on. So many time I am yelling at the computer “MOVE YOUR FINGER” or “show me what you just did” or “turn on some lights to show what you are doing”. BRAVO! Well done, I will be looking for more!

[@forevercontrarian3517]

Watching and listening as I post. Impressed by the thoroughness of this tutorial. Heck, not sure if doable but I would prefer to send u my 30 and get this done. I have found though that using the Federal 50gr and mine seems to fire flawlessly. The trigger , also, seems very soft already. Still, improvements to any firearm are always welcome. Super post! 😷🍀🇺🇸⛄️

[@dancarbone7798]

Outstanding kit! I never had the misfortune of firing a bad PMR-30 because I installed this first. Took forever to install though...20 minutes to put the parts in and 3 hours looking for the damn retaining wire on the floor. Haha! Gun fires GREAT and accurate! Love the adjustable trigger. Buffers please, and thanks for a great product!

[@alonzohall9561]

I’ll be looking forward to ordering this stuff once my sub2k stuff comes in and gets done. Can’t wait to have the p17, pmr 30, cp33 and sub2k running great once I’m able to make it to the range. Would like to see the buffer replacement just for peace of mind. One less thing to worry about.

[@RowdyRory]

Very nice. Thanks for the video. You really have a talent for teaching. Wonderfully clear. Ya gotta do the buffer and that extra wire thingy.

[@bertshelley2703]

DEFINITELY do the buffer please. And the little wire spring clip...

[@deplorabledave1048]

They did! Here it is. I just watched the video on it. MCarbo freaking rocks!!! I love the owner, Chris. What an amazing human being. VIDEO>>>>>>>>>>>>>>>>>> "New KEL TEC PMR 30 Upgrades Just Released! First Look at KEL-TEC PMR-30 Operator Mount! M*CARBO! 304 views Jul 1, 2021" kzbin.info/www/bejne/nJyxgXypdqijp8U Precision CNC Machined Peek High-Performance Thermoplastic Replacement Buffer that won't Melt or Deform under intense Heat & Pressure! Will outlast the factory buffer that melts. PEEK High-Performance Buffer can Take the Heat and Handle the Beating! Will maintain proper buffer thickness to ensure reliable cycling operations of the PMR-30. PMR-30 Peek Performance Buffer is resistant to chemicals and continuous operating temperatures up to 480° F. Precision CNC Machined 6061 Aluminum Replacements for Factory Plastic Safety Selector Switches Left & Right Aluminum Replacement Selector Switches Included in this Kit. KEL-TEC PMR-30 Operator Mount Coming Soon! Frame Mounted to ensure reliable operation of PMR-30 and Accurate Zero of Red Dot Optic. Mounted just high enough to use Fiber Optic Iron Sights and low enough to easily transition to your Red Dot Optics. Mount Position allows for a more balanced PMR-30 with a full magazine Avoids adding additional weight to the PMR-30 slide that will slow down the cycling operation just enough to induce Failure to Feed Malfunctions. No more PMR 30 FTF Malfunctions. Fixed the problems... now let's get a PMR-30 M-SERIES that will run right out of the box like a well-oiled machine! PMR 30 Mag Dump Action!

[@dwayner6597]

Thank you for the great video, I purchased the upgrade kit but had to wait until I could get a second pmr since my pops will not give my first one back. Lol I would love to see and upgraded buffer. It is way to hard to quit pulling the trigger to let it cool down. I just saw the video on the wrap around grip so now making another shopping list. Thank you for a great product and great service.

[@mikerobino5986]

I've not had any issues with my PMR although I've only put about 500 rounds thru it. But I wanna buy this kit just because of the way this dude talks on this great video. And seriously....how many times do you see guys handle mistakes rather than editing them out.

[@95sporty1]

Just received bundle for my pmr 30 I was going to pay a pro to install but honestly after just watching this video I’m going to do it myself thanks for the very informative video now wish me luck!

[@rdiehl7809]

Great job. Great fix. Great person doing the video. Really better than a college class. Thank You. Planning on purchasing pmr and cmr. See you for your all in one bundles.

[@danraup6089]

And here I am like one or two parts short....coulda shoulda woulda. Lovin the PMR30 now that it's broke in and up-parted. Had best day so far today with my CP 33 too. About 500 rounds, very few issues.... mostly with "wrong" ammo anyway. Action really smoothing out. And yes, I'm expecting some new stuff next Tuesday for it. Great fun to choot! And, most importantly, I am happy to support a company like MCARBO. Us Army 83-87, Support of Big Red One, Ft Riley.

[@StevePetroski]

Please make an aluminum buffer. Also I just bought my all in one kit and can't wait to install it. Great video too. I feel much more comfortable after watching this. I'm really looking forwarded to this upgrade.

[@hankjones9212]

You have the most informative videos in KZbin history

[@ripcord8823]

Excellent video👍🏻 We definitely need to improve that buffer. Thank you.

[@goodoldjam]

Just did this and a couple notes. The mag release screw/Stud was reversed on my gun. The hammer spring pin popped off and even though the hammer was forward it dropped back. So I needed to get the hammer back up which was simple. Just make sure you work on this in a area where if a part flies you can find it, I almost lost the hammer spring pin. My kit included a 2nd wire for the slide spring. I also did the slide lock upgrade which included 2 extra screws. The only hard part was the recoil spring wire which I saved because I didn't see the new one. Great video! I have a torque screw driver and the factory screws seem to be torqued about 3in lbs.

[@davidmills9748]

I love my pmr 30, can't wait to get some up grades, however as long as you only use full metal jackets it works fine the way it is, but who wants to just do that when there are so many other choices

[@jeffvozeh1091]

i just bought the pmr30 kit and installed it. I sent the guide rod spring to M*CARBO to install because i lost the first clip and washer and it drove me crazy. It was $35 with shipping both ways , well worth it to me. Makes it a great reliable fun gun to shoot. Reliable now to even consider for EDC. I also bought the M*CARBO m series sub2000. Makes a novelty type gun into a reliable, great shooting weapon. . The sub2000 shouldn't be sold without this complete upgrade. Please put out the improved pmr buffer.

[@rogerl8488]

Dam what a great video!!!!! Thank you I will be buying the kit loader!!! Yes would love a new clip an buffer...

[@leonardkinsman8969]

Two yeats late but yes, include. When I finish my Sub I’ve got to deal with my PMR… So Thank You Chris for the hard work…

[@wilstandridge7388]

FLITZ polish included in this package is really great stuff,I polished an all satin guitar with this stuff, it came out awesome, great stuff.

[@rickygentry4417]

Good for percussion cymbals to

[@jdisdetermined]

Flitz polish is amazing, safe and very inexpensive. Their Powerball drill attachments are great too. I'm a professional detailer, I have endless polishes and tools on hand, and I still reach for the Flitz regularly. You can even use it on glass to get rid of water spots. 👍👌✌

[@johnschuster9192]

Very nice guys! Thanks

[@therajuncajun6487]

Definitely upgrade the buffer so that we don't have to go through the Meltdown process and have to wait for someone to make it letting our firearm catch dust!

[@wilycoyote9091]

Just another example of where Kel-Tec goes the cheapest route for the parts in their guns. Don't know how hot it gets there if you rapid fire a couple of mags, but the engineers should have anticipated owners doing something lke that and designed a part capable of withstanding a lot more heat than 60 rounds of rapid might produce. Big mags invite rapid shooting, sort of brings out the Rambo in you.

[@therajuncajun6487]

@@wilycoyote9091 lol yes sir!

[@baltsosser]

I've fired a PMR 30 before. Really nice and accurate.

[@azrael3030]

It's kel tech your lucky if it fired

[@Vision-yg5oc]

I melted the buffer with two or more mag dumps and then it broke the take down pin in half! Luckily keltec was great and sent me all new parts for free. I own two pmr 30s and will be getting this kit for one to try out! Thanks

[@MillennialRebelion]

Mothers mag and aluminum wheel polish is the possibly greatest polish there is for cleaning up machining scares and flashing. No. 7 works really well to.

[@hulkhogan4383]

Like to see the improved buffer and the recoil spring wire replacement, we know what gonna happen with that if were not careful. Would be nice to be able to stick the whole of 50 box count in to a mag but this kit upgrade is awesome!

[@sjwhitney]

Should be a simple mold extension to make a mag that will hold the whole box of 50. It would add almost 3" to the mag, 2.5 for the ammo space and another .5" for the extra spring length.

[@briancurry2659]

For the buffer melting issue. I would recommend making a mold of a factory new buffer and then trying various consistencies (density) of silicon to achieve the buffering effect while allowing for a higher temp tolerance.

[@JoJoJoker]

This is a fantastic pistol when it’s running right.

[@chriscarnes87]

Great video by the way👍 I just ordered the feed ramp

[@dcrump]

Wow.... I just recently heard of this pistol and have to say I’m excited to purchase a 22 💪💯💯

[@CLP2102]

I just finished the all in one kit a few minutes ago,. It's a great value, shipping was fast and it is definitely worth every penny. It's just as easy as the video with the exception of that stupid wire around the recoil springs, it obviously wasn't his first time, lol. It kinda sucked. I'd send em a pic of the target shot up but I didn't get one. Great job MCARBO!!!!

[@dr2casto]

Just finished Trigger and enhanced mag release, works fine testing tomorrow…. Will now do it again for feed ramp which I “FORGOT” to put on my order! Going to add Alum safety levers also.

[@cb750k1974]

I don't have one of these guns but I was mesmerized by the video and how easy it seems to do these upgrades.

[@jamesritch5245]

Picked up my PMR-30 yesterday! I want that 5 inc barrel tho lol

[@darylSKYTZOwillis]

Very good detailed instructions 👍

[@raefordguns8243]

Rockin' the Skilcraft staple remover, Nice!

[@arecansawhillbille4463]

Oil and grease, runs perfect

[@christiangray3304]

Just stumbled onto this. Definitely going to invest!

[@deanmohamed795]

Good job with good improvements 👍

[@thedicklife]

I have over 2000 rounds through mine with zero malfunctions. Love it.

[@Northwestprepper411]

This is awsome. Please keep making more parts. I am buying 2 bundle kits now.

[@ctamarack5229]

When you said, "Hot brass down muh shirt" you sounded like Jerry Miculek!!!

[@johnwilliams640]

All you need is a good speed loader I bought one on Amazon. The gun works perfect now.

[@gregorycombs2527]

Best video I’ve seen on gun repair

[@barryreid2086]

I finally got my kit, and can't wait to get to the range. I think a new buffer would be a great idea, but what about just including a whole new guide rod with the spring kit already installed? Would definitely be worth a few more $$ to be able to drop that in. Just a thought.

[@steray8112]

Glad I held off buying the pmr until now. Super well done filming, detail explanation, and editing. Plan on buying a few for my zombie apoc homes. Have you tried high temp rubber to replace damper? Or delrin/rubber layered?

[@christophercole936]

Great video -- your loader is a life saver and now i can use it properly

[@ihatefrogs4390]

that a great demo vid..

[@deschannel300]

Yep, I've melted a buffer before. I found the replacement easily on Kel tec's site and it was here in a few days. But Y'all need to come up with something that'll last. It seemed to melt pretty quickly. It's been a while but I remember being surprised how few mags it was in the dump before it malfunctioned. By the way, love Mcarbo. I live in Dunedin and have been to your shop. Y'all did the full Monty on my Sub-2000. I just bought PMR-30 kit.

[@anthonylewis9055]

i'll probably have to email chris at his office, take up his valuable time just to tell him.... "where's the buffer chris?" but let me tell you this all in one bundle is the bomb!! quality thru and thru!! i'll let you know of the results later, right now it's about the upgrade.

[@christophermozeleski7149]

I just bought mind today. I'm pretty excited to get out in the near future and try it out.

[@paulpawlik2105]

Agree with the improved buffer. I'll be the first in line.

[@troy9er]

I love polishing too. All my feed ramps are super polished!!! My local Hardware stores aren’t carrying Flitz paste any more! 😡😡😡😡 they have Flitz, but it is a watered down version.

[@13letsgoredwings]

I love the extended Mag idea. A mag that holds a whole box of ammo would be epic. Of course the buffer. But I'll also throw out the idea of an extended rail for the cmr30. That be pretty cool.

[@jakegarrett8109]

I think at that point Glock might have this beaten (you can get drums for Glock, and I’d say a normal magazine is 33 round stick mag at like $15 or less). The cool factor of this PMR30 to me is that it’s normal size, no extension, otherwise you might as well get a calico which comes in the lowest capacity of 50x 9mm and their standard capacity is 100x 9mm and of course works on their pistol, (but it over doubles in its weight when loaded). They also make a 100x .22 rifle so if the NFA was unconstitutional you could of course bear that arm however you saw comfortable and have a pistol in a cheap plinking caliber with a bunch of ammo. I don’t know, ruins the mainstream clean look to me if it’s extended mag since there are so many options for common pistols in lots of calibers, it loses the nice aesthetics and would just be like a normal handgun with extended mag to me. Not that I’d ever complain about a gun having too adequate of capacity (I’d rather have 50x too many bullets after a gunfight than 1 too few).

[@13letsgoredwings]

@@jakegarrett8109 Looks wise it be funky on the handgun, but on the rifle it be very practical/tactical. I got plenty of Glocks and fun sticks but I don't trust the Korean products. If only Magpul would release there promised drums.

[@2CabrasLocas]

JUST bought my PMR-30 today and want to THANK YOU for all the effort you're putting into this great little gun and these mods and videos!! I want to break it in stock with one trip the the range. But will be ordering some goodies SOON!

[@CLP2102]

i'm one of the rare few that hasn't had any problems at all with my pmr, i'm still buyin this kit tho, seems like cheap insurance for what i consider a fantastic weapon

[@timmyburch9126]

mines been rock solid never had a malfunction that I can remember in 500+ rounds

[@lisaclearwater7544]

couple thousand out of mine only problem is bolt hold open while one round still in the mag. has happened 3 or 4 times

[@solidtv6211]

Almost 500 rounds in with no issues on mine

[@badloony8053]

I've had my pmr 30 for a while and havent bothered to shoot it since I saw how unreliable it was I bought it for 500 and I tried to resell it but I'm only getting offered like 150 so now I'm so glad your making so many upgrades to make it actually reliable and honestly a better buffer was the first thing I got worried about I thought about dipping it in some kind of anti heat coating but it's too dangerous since it could always ignite the polymer and burn my hands

[@bubbabaker6244]

I know what you mean to the author of the previous response!I was halfway deep into putting the Ricky Macardo upgrade in my own Kel Tec PMR-30 when I took a big swig off the plastic goop off the table which I had brewing as a alternate cooling spread to bring down the temp on the frame to under lava levels! Needless to say after wakey wakey from from the most painful wacko change to my eating habits I've yet experienced, I went and had a smithy finish my flaming jaw nightmare and now the gun works perfectly! I now shoot once a week or so and during that ritual I will announce to no friends, what my soup menu will be for the rest of the week. It really doesn't matter because I will never taste the cambells again. My life now is working late nightjobs trying to earn enough moola to buy a larger caliber to make sure I address the final solution with no more chances of screw ups! Thank the gods for the Kovids for I would never travel without this oversized mask I spot welded to some of the stumps of bone I was lucky enough to not burn off. My one mistake is only 20 dollars short of the cheap 45. ACP highpoint to put an end to my nightmare. Hopefully, whomever finds the corpse will kick the highpoint into the nearest garbage can! I've got to say the person I bequeath the PMR to are going to love the how nice your packy made the PMR-30 so superior and an amazing plinker!! Thanks guys! Live long and procate! And for Gods sakes don't drink and modify! A life gone wrong by Don F.

[@hokiecolt8107]

An improved buffer for the CMR-30 would be awesome! Thanks!

[@ericanewalt4009]

MCARBO is the BEST!!...Excelent quality parts and you come out with state of the art ideas ...

[@niko714]

Great video....thank you

[@timbennett7211]

I ordered the kit today and went ahead at the same time and ordered a recoil guide/spring assembly from kel-tec because I know I'm going to screw up or lose that little wire retainer that holds the springs in place.

[@mguerrrero]

Definitely buying this. Also definitely need a better buffer and also a better firing pin. Then release it as the "all in two" bundle

[@catsandcarsringtailgang6188]

Lov this 1st vid I seen with index! +100 likes for that ! My 30PMR FLAWLESS !

[@fancyultrafresh3264]

Random youtube confirmation review: These MCarbo accessories make it run like a clock. Absolute recommend to anyone who is on the fence.

[@MCARBO]

Awesome! Thanks Brother

[@corysornson8890]

Yes. Great video. Please include the the little wire ring and better buffer in the all in one kit!! Guys will thank you a million times!

[@Tencargo]

My kit is in transit. Yes. A better buffer is a must and additional recoil spring circular clips. I’ll buy them to add to my gun.

[@okcrn361]

YEAH! Like it. Please to the buffer and guide rod clip. I'd actually like to see a replacement guide rod and e-clip

[@Chopper-nz2jq]

Great "How To" video!

[@lewstherin826]

Yes New Buffer

[@RayFinkle22266]

I just put a CMR 30 in layaway as I didnt want to drop all the money at once.is the CMR and PMR the same thing on thebi side or does all accessories swap between each other?What are the most common problems with the CMR 30? I got it just to have fun with would like to have a binary.trigger kinda or really a suppressor or the barrel cut down..thanks guys yall het more of my money lol

[@johnluhrs8494]

I got my PMR-30 bundle and before I did anything else I went ahead and polished the stainless feed ramp before pulling the gun apart. The kit went in without a hitch and I took my gun to the range today and really the biggest thing I noticed was how well the mag sit in the mag well. Gun performed flawlessly with Federal 50 gr., Armscore 40 gr. and Hornady 45 gr. critical defense. The guy shooting next to me just had to try the gun, it is a blast to shoot! Would like to see a heavy duty buffer developed by M*Carbo.

[@johnhilton6863]

Me too

[@sjwhitney]

Regarding the plastic buffer at the front of the gun that keeps melting with heavy use --- This would be best replaced by a formed piece of high temp Teflon such as you would find used in steam fittings of hydraulic cylinders. Some of the steam fitting (packing material for valve stems) Teflon is actually rather soft and would provide a great cushion and resist the effects of the heat greatly. My observations on installing the kit: 1. When removing the retaining ring wire from the slide spring assembly, it is far easier to hold the springs compressed when the assembly is still in the slide. It's sort of an even wash when trying to reinstall the ring. It is a little difficult to insert the spring assembly into the slide without them being captured by the ring but reinstallation of the ring is much easier because the compressed slide assembly is easier to hold in your one free hand. 2. I found it much easier to get the slide lock lever spring back into place by letting the lock lever's open C foot off the post so you have less to push the spring and it's more in the open. Once the spring is in the hole it's and easy small push to move the C foot back over the post. 3. With the two halves separated, I had no need for the alignment pin for the mag release spring and new release button. I simply made sure the post remained with the working half of the gun assembly and just popped the new part right in and held the spring with my fingers. I only had to chase it once... ;-)

[@scudzuki]

The mirror finish on the feed ramp looks impressive, but I always polish feed ramps in the direction the bullet travels.

[@richsellskc]

I wore out the cheap buffer and replaced it with a piece of stiff rawhide then lubed it up to make it pliable. works great. Just buy a cheap leather punch /plier tool and you can form a nice buffer making sure the leather is the right thickness as the stock buffer. Made a few extras as back ups....or, you can buy the cheap buffers from keltec for $2 each plus shipping...etc.

[@jimdaniel7297]

MASTERFULLY TAUGHT . ALL MY ADHD BRAINPARTS ACTUALLY FOCUSED ...

[@1776adb]

Great gun at a fair price point.

[@HuxleyTheProf]

You guys got a trigger upgrade, foregrip, and better bolt release for a keltec Rdb? I'd love a functional bolt release