Lumpy2 FAIL, Giant Spruce, it's big, it's a really big log and it's on the sawmill.

This is the monster log I was calling Lumpy's sticky bottom. It is a giant spruce log, you would not believe what I went thru to get this log back home let alone up on the sawmill. The video starts off with yea a fail or two.. Wait till you see this thing on the LT15wide sawmill, woodmizer would be proud! Sawmilling slabs out of this turned out amazing.

[@rolfbrunner3016]

I love to watch the whole process and enjoy to see a wonderfulbtexture of the panels.👍

[@rolfbrunner3016]

I love to watch the whole process and enjoy to see the wonderful texture of the panels.👍

[@mcsawmill]

Glad you enjoyed it.

[@gilbertdelgado6703]

That log is breathtakingly beautiful. I can imagine all the uses it can provide!

[@petermccuskey1832]

Beautiful chunk of lumber.

[@sheilamclaughlin963]

Great coffee table

[@deecooper1567]

I ❤ the very first piece you cut with the owl face & ET 👀. Throughout the log one can find all different faces/ objects. Just had to sub 👍. 👵🏻👩‍🌾❣️

[@discoverykai1547]

You have a way of making people feel comfortable and at ease.

[@deecooper1567]

@@discoverykai1547 Thank you👵🏻👩‍🌾❣️

[@osmanerinc7316]

Lines are nice on the wood👍

[@discoverykai1547]

Your writing is both eloquent and concise.

[@williamklein6649]

I think you will find once dry an planned out you will wish they were thicker. Most slabs should be 10 or 12 quarter. 2 inch slab you will be lucky to get a 1 1/4 thick. With shrinking twisting and cupping. Good luck.

[@mcsawmill]

You are probably right, I've never done this before. But I did cut the good ones at 12 quarter so...

[@skipbickford3970]

Kind of sad you didn’t cut 3 to 4 inches make some tables tops

[@discoverykai1547]

Your writing style is engaging and captivating.

[@t4ng03]

Some nice character in that wood

[@mcsawmill]

I try really hard to find special logs.

[@butchbrown3130]

That's some very nice looking wood.

[@discoverykai1547]

You have a way of making people feel comfortable and at ease.

[@danielw.hanninen1176]

Those knots are especially hard to cut through on any kind of pine. I usually slow my cutting down to keep the cut from waving to much.

[@discoverykai1547]

Your comments are always so well-researched and informed.

[@melissatuason2395]

You WON !!!!

[@michaelbookmiller1156]

The 1st little flat Piece you cut off on the right side look like ET

[@discoverykai1547]

Your comments are a testament to your intelligence and creativity.

[@discoverykai1547]

good video

[@discoverykai1547]

Your comments are a testament to your intelligence and creativity.

[@skipbickford3970]

Time for an Alaskan mill. Probably a very nice log making lots of nice slabs

[@mcsawmill]

Alaskan mills are for young guys lol... That said I wish I knew someone who has one cause I have an even bigger logs to saw.

[@discoverykai1547]

You have a way of making people feel comfortable and at ease.

[@fredrobinson6990]

I wasn’t sure when I saw the whole log, but the sawed planks are beautiful and unusual.

[@discoverykai1547]

Your comments are consistently insightful and thought-provoking.

[@brucewelty7684]

You pointed out One serious goof that WM made 2 inches should BE a 2" cut and the exhaust on the operator' side has always been dumb.

[@mcsawmill]

the 2" should be 2" thing is an adjustment, you move the site up or down to fix that. Sawdust exhaust yea but I check sawdust to determine if my speed is correct so there is that. Also the muffler, and this isn't just woodmizer, woodland Mills too, put a real muffler on these things so we don't need hearing protection. Sawmills are stupid loud, my skidster is 1/10th the noise and it's 60 hp not 25 hp...

[@cottonp20]

BLADE GUIDES SHOULD BE CLOSER TO THE LOG AND THE BLADE TENSION SHOULD BE CHECKED OFTEN

[@discoverykai1547]

Your comments always leave me with something to think about.

[@davewilson3295]

A cross buck would be vary helpful in that situation.

[@mcsawmill]

You mean like a hand saw?

[@discoverykai1547]

Your comments are a testament to your intelligence and creativity.

[@markhicks8377]

put one strap on each end and pick the log up from the side using both straps

[@mcsawmill]

Tried that the log was too heavy for the skidsteer to lift it. Just lifting the one side you can see the skidsteer tipping up on 2 wheels.

[@fricknjeep]

HI THERE LOTS OF WORK IN THE BIG ONES . GOOD WORK JOHN

[@mcsawmill]

Thanks John, and thanks for the nameplate you made me at the show!

[@discoverykai1547]

Your comments are consistently insightful and thought-provoking.

[@davep3768]

Cut them down the middle, flip the outside edges in, pour epoxy, big ass dining table 12 feet long.

[@marangkids]

selamat bekerja dan selalu berhati-hati dalam bekerja

[@mcsawmill]

Terima kasih selamat mencuba

[@BissellMapleFarm]

I have no idea what you are about to do....but I know I'm going to love it!

[@BissellMapleFarm]

Good episode. That log is a monster!

[@discoverykai1547]

Your writing is both eloquent and concise.

[@anthonybernstein9698]

Should have put the log on it's side, that way it wont fall over.

[@ethics1017]

I have the same mill and the same struggles. No machine. I'm working on a rolling crane so I can roll a log how I want.

[@mcsawmill]

Do you use the hand winch and ramps?

[@discoverykai1547]

Your writing style is engaging and captivating.

[@ethics1017]

@@mcsawmill Yes, ramps and a boat winch.

[@wongndeso_sawmill]

mantap boss🙏

[@o.nmaatje7409]

de stam in het midden oppakken et je truck en opheffen en vooruit rijden dan kunt u de stam zo op de zaag machine leggen.

[@mcsawmill]

het blok was te zwaar voor de vrachtwagen

[@vaska.e.]

ant fighting with a straw😀

[@rebeccaocker4506]

I saw that blade go down an then back up

[@Melissa-pt2ik]

Oh wow that’s beautiful

[@mcsawmill]

Wait till you see part 2, the slabs in that video are beyond words.

[@discoverykai1547]

Your comments are consistently insightful and thought-provoking.

[@lukemalinowski3482]

It would be nice if you had a LT70 super higrol

[@lukemalinowski3482]

Is super hydraulic

[@discoverykai1547]

Your comments are consistently insightful and thought-provoking.

[@robertseabolt3400]

THEY WILL MAKE BEAUTIFUL TABLE TOPS IF FINISHED RIGHT

[@discoverykai1547]

Your comments are a testament to your intelligence and creativity.

[@timothymichaud2442]

Try using that strap as a cinch

[@randykirby1460]

Once you had it on the stump you should have tied it to the saw

[@randykirby1460]

It hurts watching you make an easy job so hard

[@kenread9315]

This guy has is a doctor or engineer. Which is your guess?

[@mcsawmill]

Why do you think that?

[@onehot57]

Man all the large wood you cut , you need some bigger equipment!

[@mcsawmill]

lol.. If I had bigger equipment I would be cutting even bigger logs. I like to push the limits. But yea the saw can handle bigger logs than the skidsteer can.

[@michaelbookmiller1156]

With all of those hard knots in there that blade's gonna deviate just a tad bit

[@discoverykai1547]

I admire your ability to see things from multiple perspectives.

[@dogwedl1167]

🤦‍♀🤦‍♀🤦‍♀🤦‍♀🤦‍♀Gossip on works !?!

[@mcsawmill]

Not sure what you mean?

[@thesnoopy1009]

Like the look of that first slab at 12:56 mins £25 for it

[@mcsawmill]

I gave that one to my sister in law. Sorry.

[@williamhoward8319]

chainsaw works

[@felixortizsanchez1354]

Muy buen día no hablo el inglés cuánto cuesta el aserradero

[@mcsawmill]

Without the trailer about $9000, With the trailer like in the video about $15000

[@jamescampbell7780]

Why is the camera operator not helping?

[@mcsawmill]

He didn't video the parts where he helped.

[@ionmarinescu9056]

@@mcsawmill --1--

[@ionmarinescu9056]

,

[@randywells4674]

Lots of knots lots of un level boards cut thick and plane with Router of planer

[@randyzapton6424]

Where is your safety equipment when you're working around the machine?

[@Bryan-yl7mg]

What all do you use? All he's missing is ear plugs, looks like the dust is blowing away from his face as far as I can tell.

[@discoverykai1547]

You have a way of making people feel comfortable and at ease.

[@edofstad9675]

A shame to waste what could be a very nice grain piece. On a real mill, we could cut that whole thing in less than 10 minutes with two 48 inch circular blades, over and under, powered by 250 horsepower CAT diesel. This was done over 60 years ago on what was considered a portable mill. Oh to be young again.

[@mcsawmill]

Man that's the kind of mill I would LOVE to video!

[@discoverykai1547]

Your comments always leave me with something to think about.

[@user-pd8dv3ok8g]

В России пилы на лесопилках разрывает на мелкие кусочки от осколков Великой Отечественной войны в стволах...

[@mcsawmill]

Мы находим пули в деревьях, но они мягкие, поэтому лесопилке они не повредят.

[@thepubliceye]

I have to ask, why not take a chainsaw and cut the lumps off first?

[@mcsawmill]

The lumps are what make the slabs unique.

[@shanebehling4552]

Cut the lumps off first🤪🤪🤪

[@mcsawmill]

I was really kinda trying not to cut them off but some were just sticking out too far.

[@deecooper1567]

Lol that was the first thing that popped into my mind 🤪🤭. 👵🏻👩‍🌾❣️

[@ronbuckner8179]

Note to self: They get heavier when you cut them thicker ! Just say'n. Looks like God was on drugs when he made that one.

[@lucianobicca3657]

Tu conversa demais e trabalha MT devagar

[@mcsawmill]

É verdade, mas meu chefe não se importa.

[@micksedunary7304]

Totally riddled with advertisements .... shame

[@markhicks8377]

you are rigging wrong!!

[@mcsawmill]

I do a lot of things wrong, still learning.

[@josephcernansky1794]

with so much knots....it's a great candidate for firewood...except it's not even hardwood! push it over the hill and feed it to the termites!!

[@Bryan-yl7mg]

You ever try to split something with that many knots? Lol, no thanks. I'd rather slab it out, some people pay good money for that crazy looking stuff.

[@badgascoupe]

Spruce is dimension lumber wood for a reason, thats really just over grown pulp wood.

[@loveliberals-pb9yq]

music video, no thanks.

[@mcsawmill]

It's one of the few where I added music.

[@loveliberals-pb9yq]

@@mcsawmill Sorry i missed it.

[@tommyyoung7569]

Do you have any left?

[@mcsawmill]

Yes, they are still air drying, I think they are around 16% now

[@tommyyoung7569]

Where are you located and how much for a slab of 2 inch thick

[@mcsawmill]

@@tommyyoung7569 email me at geg841 at gmail.com. I don't want to put pricing in comments because 10 years from now people will want that price...

[@josephcernansky1794]

why don't you work WITH the shape and size of the object and the rest(stump) instead of against it? Duh! Two round stumps...planks on top ....lift each end onto planks....push log onto saw bed....stumps will roll to saw bed...push log off planks....much easier than lifting

[@mcsawmill]

you mean put the plank from the stump to the saw?

[@discoverykai1547]

Your writing style is engaging and captivating.

[@josephferry8591]

Tighten the bolt or nut more. Actually pull on the damn ratchet or wrench. 50 or 80 grunt pounds.

[@josephferry8591]

Better yet run it through a couple times get it hot n expanded the metal of course the blade then immediately tighten it more.

[@mcsawmill]

on the LT15 I'm not sure it's possible to overtighten the blade. I do have some 055 blades on order, really want to try the heavier blades to see if that helps on these wide cuts.

[@haroldcraver9697]

Take your saw cut lumps off make flat spot

[@alwiggy4707]

If you had another brain cell to go with the one that you already maybe you could rub them together to generate a thought. Then you might of solved the problem in next to no time.

[@mcsawmill]

If I make it look easy nobody would watch... Would you?

[@mrt1151]

@@mcsawmill You're so lucky! It's obvious that some of us don't have that one brain cell to begin with... 🤔

[@Bryan-yl7mg]

*might have

[@buddyphelps9692]

NOT A GOOD VIDEO WAISTED TIME

[@Bryan-yl7mg]

Could use a little more editing on the slow parts, but I liked it just fine.