MD-11 Advanced Tutorial Series Part 6: SPAD Control Setup | MSFS

  Рет қаралды 2,409

Moosestaffa

Moosestaffa

Күн бұрын

Пікірлер: 27
@pankracy111
@pankracy111 5 ай бұрын
Thank you for this video, brighten up a lot for me! I'm still having difficulties with flaps handle (spoiler went pretty fast, bit other way but it's working)
@moosestaffa83
@moosestaffa83 4 ай бұрын
Glad to hear it's helping
@serse9570
@serse9570 4 ай бұрын
It would be great if you could then give us a series on the 727 that is coming out... an airplane that would definitely need a masterclass of this quality! Fortunately, FSS provides us with a lot of documentation about it. Would you like it?
@moosestaffa83
@moosestaffa83 4 ай бұрын
I am planning on doing just that, unfortunately I have to wait until it releases as I have not heard back on getting an advanced copy.
@uvupilot3233
@uvupilot3233 3 ай бұрын
Hello! It seems your SPAD profiles are not availble any more! They're not published online anyways.
@moosestaffa83
@moosestaffa83 3 ай бұрын
Yes they are... you need to uncheck "current aircraft only" I just checked two days ago
@uvupilot3233
@uvupilot3233 3 ай бұрын
@@moosestaffa83 yeah I tried that. I will mess around with it again
@yams900
@yams900 5 ай бұрын
Can you please do a tutorial with Axis And Ohs too :)
@moosestaffa83
@moosestaffa83 5 ай бұрын
I don't have axes & ohs, and am therefore not familiar with it. I just know it's another option that some people use. Sorry
@HondaJet100
@HondaJet100 5 ай бұрын
Very helpful video moosestaffa. Thanks for posting it. I just loaded your md-11 profile in SPAD and am trying to tweak it to fit my bravo first. I found when copying the full profile into my spad I first noticed the commands for the bravo flaps switch only shows flaps up scripts. Not the commands for the autobrakes like you showed in the video. My next issue is I use throttle for 1-2-3 in the axis one to the left of yours. Do you know if there is a way to copy your lever 1 to move it 1 spot to the left of yours?
@moosestaffa83
@moosestaffa83 5 ай бұрын
I wonder if I have to reshare the profile/snippets everytime I make changes. I figured once it was shared any saves I made were updated... maybe not. As to copying, the easiest way is to click on one of the settings in my throttle 1, select edit and copy, choose copy all events, then go to your throttle 1 and select paste. Then repeat for my 2 and my 3 in that order
@HondaJet100
@HondaJet100 5 ай бұрын
@@moosestaffa83 Thanks for your response; I will try another DL of your profile in a day or two and see it they are there. In the mean time I will work on making the throttle change one slot over to the left. I just found out my flaps skip over 35 as I have one of those flaps slot addons to the bravo. Can you tell me what to do to adjust that so it stops on 35 lined up with the 35 notch? Next I will get on your discord so questions can be easier to post. Thanks for all your hard work on flightsim content to help us out here.
@philipg6463
@philipg6463 4 ай бұрын
Great video tutorial I aam sure, however for us mortals that have no SPAD and only the Bravo forcontrols is it possible to map proper throttles? I cannot seem to map reverse thrust, thanks a lot.
@moosestaffa83
@moosestaffa83 4 ай бұрын
So just tried setting it up in MSFS, here is what you do: Set Throttle 1 Axis to your Bravo Throttle 1 (uncheck "Reverse Axis") Set Throttle 1 Decrease to your #1 reverser on the Bravo (on press) Set Throttle 1 Cut to #1 reverser on the Bravo (on release) **Note: after setting an On Release you have to back into the command and set it to "on release" again, it always reverts to "on press" the first time. Repeat for Throttle 2 an 3
@philipg6463
@philipg6463 4 ай бұрын
@@moosestaffa83 Thats excellent thank you it worked. I will now watch all your tutorials and Like them all. Might even consider SPAD. You are the best. Cheers
@igorigor472
@igorigor472 12 күн бұрын
Hi, friend, tell me how to turn off the failure system on an airplane? tfdi md 11
@moosestaffa83
@moosestaffa83 11 күн бұрын
It's already off because it doesn't exist yet, failures are something they are planning to add, but it has not been implemented yet.
@igorigor472
@igorigor472 11 күн бұрын
@@moosestaffa83 Thanks
@igorigor472
@igorigor472 11 күн бұрын
@@moosestaffa83 Hi, I understand now. When I start the third engine, my APU shuts down, and the engine turns off after that. What am I doing wrong? Could you please help me out?
@stephenmckinnell7791
@stephenmckinnell7791 5 ай бұрын
Thanks for the vid. I’m new to this level of software, so expect dumb comments or questions 😊 I don’t have SPAD or any other software and I can’t seem to manipulate some MD11 MCP switches, for example the Speed & Alt buttons I can’t pull out and it’s affecting my ability to use to its full potential, and flying on VatSim. I have the Bravo throttle (&Virpil joystick). Do I have to buy SPAD or similar to solve my problem? Might an Airbus (similar push/pull) MCP panel work for the MD11, as I really like the Plane?
@moosestaffa83
@moosestaffa83 5 ай бұрын
If you want to use the autopilot controls on the Bravo your best bet will probably be SPAD or Axis & Ohs. However to use the push pull in the Sim you simply need to hover your mouse above or below the knob until the cursor turns into either an up or a down arrow. Up = push, down = pull
@stephenmckinnell7791
@stephenmckinnell7791 5 ай бұрын
@@moosestaffa83 I thought I must be missing something obvious! Thanks for that. 👍 I must look into SPAD though, because I am wasting a load of potential. I had a bad stroke which left me disabled so it’s tricky, everything has to be manipulated on my left side. If that’s not limiting enough, I fly exclusively in VR, which adds to the complications! For me, it’s the difference between being there and being in a 2d photo. Personally I’m not too bothered about the hand flying characteristics of the airliners, as like in real life for me, 99% of the time the autopilot went on asap and was generally switched off when below 1000ft on approach. The stroke ended my flying career aged 50, but it was relit again by finding VR a decade later, after blocking it out for the sake of my mental health. I truly love it! If real flying/planes were as finicky as the sim, I wouldn’t be caught dead in them! 😂 Thanks for sharing the passion…🙏
@stephenmckinnell7791
@stephenmckinnell7791 5 ай бұрын
@@moosestaffa83 Thanks, I tried it and it works of course, so thanks. The speed doesn’t reduce as I’d like it to though, if I was given a speed to fly on VatSim I am doubtful I could do it. The speedbrake doesn’t even reduce it much, even with the Throttles closed. I think I’ll come on your discord and find out if this is commonly reported.
@David-gf1py
@David-gf1py 4 ай бұрын
Can I ask how you found a profile for this md-11? I cannot find anything related to it on spad next. Thank you
@moosestaffa83
@moosestaffa83 4 ай бұрын
Uncheck the "only current aircraft" box when searching
@willian402m
@willian402m 2 ай бұрын
profire TCA Airbus
@moosestaffa83
@moosestaffa83 2 ай бұрын
Sorry, I don't have the TCA airbus hardware. You'll have to take what is presented here and adapt it to your hardware
MD-11 Advanced Tutorial Series Part 4: FMC Setup | MSFS
36:29
Moosestaffa
Рет қаралды 2,1 М.
Creative Justice at the Checkout: Bananas and Eggs Showdown #shorts
00:18
Fabiosa Best Lifehacks
Рет қаралды 34 МЛН
Thank you Santa
00:13
Nadir Show
Рет қаралды 54 МЛН
Long Nails 💅🏻 #shorts
00:50
Mr DegrEE
Рет қаралды 20 МЛН
MSFS2024 | Tutorial | Heli specific control setup
14:22
ehindur
Рет қаралды 1 М.
True Heavy Metal: TFDI MD-11 Review with a Real Airline Pilot!
1:08:45
Microsoft Flight Simulator With THESE Upgrades Is *AMAZING*
16:03
TheFlightDoc
Рет қаралды 155 М.
MD-11 Advanced Tutorial Series Part 3: Cockpit Pre-Flight | MSFS
24:44
Creative Justice at the Checkout: Bananas and Eggs Showdown #shorts
00:18
Fabiosa Best Lifehacks
Рет қаралды 34 МЛН