ME ENGINE EXHAUST VALVE OILSEAL CONTROL UNIT |KNOCKIN G PROBLEM RESOLVED |SEA LEGEND

[@rammscmarine]

Day by Day videos are getting better. Expect more number videos sir

[@PankajKumar-gq5mu]

Perfectly explained ....thks for info chief..

[@tousifmhaskar1711]

Very informative and perfectly explained. keep posting

[@bibinjoseph1190]

Very well explained....keep posting such informative videos.

[@vivektiwari4459]

Thank u for uploading sir

[@sadhanatiwari3363]

Good

[@sergburoff6874]

Thanx, that is isfull information.

[@vadymshevchuk6279]

Please tell me, throttle valve and banjo valve is it same?

[@ManojKumar-pd3ht]

Is it necessary to dismantle the full valve Instead we can clear the orifice in place??

[@sealegend1627]

Hi Manoj ...Firstly thks for watching the video and sharing ur comment.. There is absolutely no need to dismantle the exhaust valve...u can do it in-situ...just stop the main lube oil pp.

[@keyurtandel4291]

Thank u very much for all video..waiting for more video sir .keep going we are with u 👍🏻

[@alludhananjaya621]

Superb .sir

[@rankopaovic750]

Hello frend👌

[@melchiorwankowicz]

Hi. So, if the orifice is clogged there is no sealing oil dosed to air cylinder stuffing box. In this case can we expect big hammering noise coming from valve? What is the reason of this hammering?

[@duongucdung785]

Can you tell me the function of oil seal control and throttle valve fitting on the exhaust valve actuator? Thanks too much,hope you noon feedback.

[@sealegend1627]

Hey sorry for late reply...the oil seal control unit feeds a controlled amount of oil dose to the air cylinder stuffing box.This oil is needed for lubrication of Exhaust vv spindle ,particularly in the portion where there is sealing of Exhaust gases. U can watch my video on ME Engines Exhaust Valve ohaul...u will get an idea of it..Thanks for sharing ur doubt.

[@zr9_mata901]

Pls write the engine type on your tittle...for easy to found anx understand

[@sealegend1627]

Appreciate ur suggestion....will definitely add on in future..

[@surajmohanty9278]

Sir what u expect from an engine cadet on his first sail?

[@sealegend1627]

Seriously speaking after my experience abt fresh recruites,,,,they adapt themselves in there duties and rank. Only prob is they come to conclusions very fast... My expectations from engine and deck cadets is just speak as less as possible and don't repeat the same mistakes....

[@bobl78]

engine shutdown necessary ?

[@ВладПолунин-б4г]

Thank you

[@dt-odessa]

Could it be done without dismantling exh valve from engine???

[@sealegend1627]

Hey hello...thks for watching the video...yes same can b done without dismantling exh vv from engine....just make sure the L.O.PP is stopped and spring air is shut.

[@s1ned722]

Should be more tape