Electric Motor Rewinding - An Amazing Technique You Must See!

Amazing Technique Of Electric Motor Rewinding | 3 Phase Motor Rewinding
Electric Motor Rewinding - An Amazing Technique You Must See!
In this video, we'll show you an amazing technique of electric motor rewind. By using this technique, you can save your electric motor from damage and extend its lifespan.
If you're working with an electric motor and you notice that it's starting to wear down, then this technique is perfect for you! By rewinding your electric motor using this technique, you can save it from damage and keep it running smoothly for years to come.
FOLLOW ME ON FACEBOOK :
/ mechanicalwork78
FOLLOW ME ON INSTAGRAM : / mechanicalwork78
FOLLOW ME ON TIKTOK :
/ mechanicalwork78
Amazing Technique Of Making a Heavy-Duty Screw Conveyor : • Amazing Technique Of M...
Brilliant Technique Of Fixing Finger Flywheel Set in Truck
• Brilliant Technique Of...
How To Clean A Radiator | Restoration Radiator
• How To Clean A Radiato...
How To Dead Old Battery Repairing
• How To Dead Old Batter...
Amazing Rewinding Of Truck Starter Motor Armature
• Amazing Rewinding Of T...
How To Install Piston Rings And Valves In 70cc Motorcycle Engine
• INSTALLING PISTON RING...
#amazing #technique #electric #motor #rewinding
~-~~-~~~-~~-~
Please watch: "How to restore old use tire #ytshorts #tire #satisfying"
• How to restore old use...
~-~~-~~~-~~-~

[@farhanishtiak819]

So eye soothing and peaceful it was.

[@user-ks7pb5yj4n]

Veey cool. My Dad used to have his own shop doing this when I was little. We always had copper wire around the house. ❤

[@carbostar]

This is how we did it back in the day, nothing amazing about it.

[@ismaeldossantos3296]

What"s amazing technique? I was doing that when i was 18 years old, i am 69 now.

[@DailyMyChildhood]

Absolutely amazing ! Thanks for creating this content 😊

[@SonuDas-oz1kk]

Ya ka ha pe srji mai anachahatahu❤❤

[@RussellBooth1977]

I was rewinding motors about 20 years ago,that one in the video is a 2 pole lap wound 3 phase star connected electric motor. A client my boss rewound then for wanted the insides of the motor housings & the ends of the rotors painted with Isonel varnish for additional insulation (for an arc shield in the event that a winding may blow out & arc out to earth ) !

[@abhinabhi1991]

Its a 4 pole winding. Not 2pole

[@xenomedes]

Přesně 4 pól 36 drážek krok 8,10,12 zapojení Y6 výv 😊

[@TosinPeter-hk9mf]

Good job

[@jetrick105]

I find this so relaxing to watch!

[@Swenser]

I'm feeling like a plate of spaghetti now.

[@kbalachandran2007]

Beautiful winding. Years of hard practice. Say hai to camera📷 man also. From KERALA, INDIA🇮🇳

[@georgekalafatis7286]

Good job I like the way you insulate the wires

[@hassanbaloch5354]

good job realy amazing

[@dailylifetz]

Good job they doing like I m doing i appreciate my job

[@johnwagenhauser9835]

True professional. Thanks man!

[@mechanicalwork78]

Thanks

[@giftmanase-ev1sg]

Good job it's amazing

[@preciousritah5278]

How did u get the slots,the length and the number of turns

[@ohger1]

A *real* technician would have sanded, spliced, and re-enameled all that old wire..

[@user-tu7zx8wn3z]

very nice work my friend

[@mechanicalwork78]

Many thanks

[@kelanaground]

Incredible tutorial Winding 3 phase motor dynamo.. Testing.. 8:34

[@yusufozbunar1681]

1500 d/d 👍

[@Wolf.88]

AWESOME 😎

[@electrolab233]

Good

[@JaykeSapalaran-iq3qs]

Great video tutorial 👍♥️ thank you for sharing your knowledge ♥️🇵🇭

[@mechanicalwork78]

Thank You

[@ranidujp5560]

Really really worth

[@javad2108]

It's Star connection. 👍

[@leonardinnocent9638]

Excellent job

[@mechanicalwork78]

Thank you very much!

[@electricsbangla]

very nice video

[@user-vx1ox5ol2i]

Thanks MR .... i have a question? how do you come up with those wires that you are connecting at the back

[@farhanishtiak819]

At 2:36 , how did he manage to round the wires, then he winded the wire. How come it was circulating despite not getting apart? At 4:00 where does these wire segment came from?

[@electrolab233]

Take my salam assalamualaikum,good rewinding, how to increas in channel.

[@putraputri3596]

Good job bro but i need you give how to servis angker (easy then undestand)

[@maureenborromeo1547]

)

[@muhammadshahid2734]

Amazing and good job

[@SongSingsit-mn2cs]

How to conect sir

[@TosinPeter-hk9mf]

Is it my job l love,s

[@unkjason]

I have a couple of questions. Is that wire solid copper? Did you replace the bearings? Was that real time?

[@GrimReaping]

The wire is copper, but its coated to prevent arcs. Also, this wasnt real time. This process takes atleast 2 hours for a professional with correct tooling (for this size motor).

[@ksrinivasa938]

U must read comments

[@user-zb2uf5ew9t]

How many houspower is this and how many turns is this

[@motorwindingcentre7294]

❤❤❤❤❤help me bro

[@RKP2005]

Single layer winding or double layer winding??

[@electricsbangla]

you country

[@reipahkum]

how did you know that is the right number of turns?

[@IbrahimMsanii]

Mombasa Kenya

[@ksrinivasa938]

Which gauge wire used which pole to which pole kuch bathavo

[@ssnoc]

The inside isn’t even cleaned out and you just slide new insulator paper over all that crap? The motor may spin, but not effectively or for long. You have the experience, so why not clean it up get out all old insulation and clean metal BEFORE continuing?

[@federicomagni4851]

Great video!! Really appreciated it! I'd have a couple of questions: What did you use for tighten the windings? What material are those strings and wrappings? And at the very end what did you brush on them? Thaaanks!

[@RussellBooth1977]

I can answer that, he's only using the cotton wrap to tighten the windings which has an alkalyd type of air dry brush on varnish applied to it. I was winding them 20 years ago using the dip & bake process after we heated up the whole motor frame in the baking oven,it was dipped in the same sort of varnish until the bubbles stopped rising to the surface because the varnish would soak in & displace the air trapped inside the winding,we would brush a Teflon coating on the end shield spigots before dipping.the whole winding & frame but. After the excess varnish had dripped off the frame of the motor we would bake it in the oven for about 1-2 hours to cure the varnish. The larger workshops would use a VPI (vacuum tank impregnation) to force air out of the windings then varnish into them.!

[@dawithailu8653]

I want to learn motor winding ? How ?

[@KAFKUBA]

Why are there 3 different diameter coils?

[@apollorobb]

If your not Putting these Stators in a vacuum pot when You Varnish the windings you arent doing it right they will never last the windings will eventually short in the slots due to vibration. This is the half ass way to rewind motors .No baker test no core loss test Not even a Hi-pot test Just Janky

[@saliyakumara2140]

How much k w this moter

[@davids7036]

Best company motor 1 hp (monoblock) winding data send me... Pls

[@agus3111]

What kind of palstic did you insert? 2:11

[@pelaaja191]

paperi!? mayby?? i not sure eiter.

[@youngplayboy786]

It's looking like F class paper.

[@abhinabhi1991]

​@@youngplayboy786 no.its a class b polyester filim.

[@pelaaja191]

@@abhinabhi1991 Definutly paapre!

[@youngplayboy786]

06:04 what... The hell are you doing? Is that Insulation varnish prosess which you complete with paint brush 🖌️?

[@MohamedZakaria-zl3mr]

Like

[@zekisonmez]

Hello Selam where is thus production can you reply me by email please

[@macingwanebheki3407]

Where are you located

[@Nadeemkhod]

Please 🙏 sath btaya bhi krein aesy koi fayada ni hy

[@ramadhanianurpuspito9737]

How to get specs needed?

[@theronbussue7908]

when you find out can you let me know please

[@shahzebjadoon5060]

Mu sa kuch bolo b, yun e shugal mela lgya hoa hai

[@youngplayboy786]

06:04 after that complete this shit prosess, How long you give Warranty Time Puriod. 2 minutes or 5 minutes warranty?

[@abhinabhi1991]

5 min,only if you dare to ask the word 'warrenty'😀

[@DanielLewis-er3cz]

How can I contact you

[@Raufalktrekalwarkr]

Good