Excellence Technique of Rewinding Stone Crusher Plant 15HP Electric Motor || 3 Phase Motor Rewinding

[@ИгорьЛеонов-ж5д]

Приятно видеть то,как ребенок не отходит от отца ,смотрит ,учится,помогает,этим людям только моё уважение!

[@МасяпкаМаленькая]

А мог бы в школе знания получать..

[@Topman256]

@@МасяпкаМаленькая какие?

[@imenleo]

Я тоже это заметил) Молодцы!

[@НикитаЗалимов-в7э]

мальчишка симпатичный

[@Хетт-09]

@@МасяпкаМаленькая К сожалению у них в стране не все могут себе позволить учиться в школе

[@ActiveJoe]

As someone watching from the US • Watching your videos is most relaxing even at 2 x speed. Hope your customers appreciate the skill talent and dedication of your workers for this very important job • It’s good to see how well you understand the design and layouts of electric motors to get the job done efficiently - loads of experience is evident with this skilled set of workers • Watching your people doing a great job make me think there is hope for the other parts of society who don't even try to have a job. Your crew is a great role model for all of us • Thanks so very much for posting and sharing! All the best and God Bless. 🇺🇸

[@ArgeKumadan]

i am not really sure if they understand it. seems like they learned it by watching without understanding, it's like muscle memory for them.

[@katherinelinford7432]

My grandfather used to do something like this when I was young. He did it with copper wire, and worked even on huge motors that were part of some of the bigger hydroelectric dams. He called it winding motors, and it was a skill that he used up until maybe 8-10 years before he passed. It was almost looked at here in our area like a lost or almost lost art, to re-wind motors, most tossed them and replaced new by then. My grandpa was born in 1910, and passed in early 2000. Neat to see it is still a skill in need.👍🏻💣⚙️🛠🔧

[@guypatts494]

Yes its a lost skill for sure

[@EvgeniyN83]

У нас в Узбекистане этот навык пользуются большим спросом

[@jesusaranjuez4447]

L

[@jesusaranjuez4447]

....

[@Бодроволиц]

There is a time for everything, and a time for every thing under heaven: a time to assemble engines and a time to take them apart.

[@rscelectrical7091]

Nice to see that these skills are still alive somewhere and a craftsman handing his skills to the next generation 👍.

[@Riwindiag]

हेल्लो

[@turbodog99]

This process is used daily in the US. The quality is much better than these guys working in the dirt. The varnish should have been baked in an oven to harden it. The bearing should be been replaced. The shaft should have been sanded/polished.

[@Болгарин-т5р]

Постоянно занимаются перемоткой, могли бы уж и гильотинку сварганить для резки картона

[@ابوياسينكهرباءوطاقهمجانية]

السلام عليكم ورحمة الله وبركاته اخي العزيز ألله يحفظكم بحق محمد وال محمد اللهم صل على محمد وال محمد 🧠🧠👍👍🙏🙏🙏🤲🤲🤲🤲🤲♥️♥️♥️♥️♥️

[@Yurik_Che]

Я так же мотаю,только не хватает соединения проварить или запаять хотя бы.

[@LF-A]

да бракоделы какие то! лакировать не стали, запекать не стали...

[@МирВамивашемудому-б4д]

Я в этом деле не спец ,но запаять все соединения нужно потом коротить и грется будет

[@vasnetsch1576]

@@МирВамивашемудому-б4д коротить что будет?. припой при перегрузки тоже плавится и стекает , если что

[@demiang9369]

@@vasnetsch1576 чем тоньше соединение, тем большее имеет сопротивление и тем больше греется, что приводит к обрыву.

[@vasnetsch1576]

@@demiang9369 а ты не пробовал выбирать сечение проводника согласно протекающему по нему тока.,? Соответственно и соединение проводки . Нет вам километр скрутки два кило припоя... Ещё раз ,как пайка влияет на короткое замыкание,?

[@Nyck461]

This is something that I admire in these people:They do almost miracle. They have almost zero resources but the make things happen. Very good job.

[@npscreations7898]

The Real Electrical Engineers😂👍🏻👍🏻

[@Frhadliyev-to9vd]

❤

[@MHamza987]

Shame on you

[@Heikkinen0301]

@muhammadhamza737 lol

[@charly-s]

And Siemens, Philips, Mercedes, VW etc are fake producers? Poor idiot🤢🤢

[@AryanIndustrial]

The Real LoL 🤣😆

[@geoffmitchell9706]

I was totally blown away watching this, these men are geniuses fixing that motor in those conditions, basic tools.if that was in UK they would say, nooo mate can't fix that, you'll need a new one. Haha they put us westerners to shame. God bless them .

[@raxorlp9932]

thats the problem with capitalism

[@ronaldochaveiro4446]

É amigo muita das vezes enxergamos mas não vemos o quanto existe tantas dificuldades em muitos casos a dificuldade para quem quer vencer ou sobreviver é uma grande ferramenta 🙏🇧🇷 Rio de janeiro 🙏

[@chuahhk4896]

It 17

[@riskamariska4756]

j8e

[@Riwindiag]

❤

[@amirarm718]

Даже соединения не пропаял, жесть😮

[@ВиталийКуповых-н8ъ]

Пропитка огонь)) главное что б данные не кривые были, а так будет маслать

[@LF-A]

@@ВиталийКуповых-н8ъ я когда мотал, окунал полностью в бак с лаком, потом сушил в печи сутки

[@keepItSimple537]

На фоне всей проделанной работы, тоже показалось халтурой что не пропаяли, хотя, по сути, куда оно там денется, всё в кембриках, армировано веревками. По сути добротно перемотали.

[@tstuart7333]

Bloody Nora, that was a learning experience. Most would rather just sell or buy a new item. First class worker.

[@bighnarajpatra8816]

F

[@turbodog99]

Smaller motors are not worth rewinding. Larger motors are worth it. Some motors can cost upwards of a half million USD... and a rewind is an economical 100k.

[@Владимир-ф4п3ы]

Молодцы . Единственный косяк по работе заметил: это скрутки обмоток, не спаивают. Видно, хватает просто скрутки.

[@tysonmike6129]

Ну, вроде так все чётко, но этот косяк все портит. Пойдёт нагрев и отгорит все нах.

[@Владимир-ф4п3ы]

@@tysonmike6129 не пойму одного: что так трудно сваривать медные скрутки, угольным электродом через 12В (от аккумулятора или трансформатора на 100-150Вт)? Хотя, сидя на диване - легко рассуждать. Замечу только одно - профессиональные специалисты, всегда применяют сварку по скруткам. В крайних случаях - пропайку.

[@АлександрД-ш8г]

видимо хватает. иначе бы давно прогорел их бизнес.

[@newage1342]

@@АлександрД-ш8г Так их бизнес только на том и держится, что движки сгорают часто, даже этот когда привезли и разобрали, было видно, что его уже перематывали

[@davidhollfelder9940]

The Tesla/Westinghouse tradition lives on. We will always need AC electric motors (and generators/alternators). A skill that will live on for generations unbounded.

[@zov4032]

Красаучики!))) Они никогда без работы не останутся!!! Завтра снова этот же движок перематывать😂😂😂

[@yara8love]

Но вроде бы на совесть делают, а так-то бизнес хороший, моторы горят постоянно и всегда. Даже те которые новые и особенно которые новые китайские

[@yara8love]

@@ivandobrov5162 во сне работал?

[@Хетт-09]

Я всё таки поражаюсь с этого народа. Какие они великие мастера. Честь и хвала им

[@АлексейАбызов-и9щ]

Паять не умеют. Соединения на скрутках- это халтура!

[@demiang9369]

Еще бы и жопу научились вытирать - вообще бы цены бы им не было....

[@bingobongo357]

@@АлексейАбызов-и9щ😂😂😂😂 а ты пиздец мастер

[@netoluna1]

Me agrada ver que estas personas que con muy pocos recursos hacen excelentes trabajos, lo que si he notado es que no les importa la apariencia de los objetos que reparan, se enfocan solamente en el funcionamiento, a mi manera de ver una buena limpieza y un poco de pintura no le hubiera caido mal al motor para tener una restauracion como de fabrica.

[@anandapatil1629]

मराठीत अनुवाद

[@nimrod25]

De seguro q le ofrecieron una pintada a su empleador a cambio de un poco mas de dinero. Pero ya sabemos como son de ávaros muchas veces y te dicen q no q estará en un entorno empolvado y de nada serviría. Tienes que ser mas perceptivo de la situación

[@Xenony100]

Как англичане показали в 19 веке, так и мотают до сих пор, передавая знание от отца к сыну...

[@aleckaleck2492]

У них там касты целые, одни литейщики, другие мотористы, третьи рамы усиливают. А эти асинхронники перематывают. Все там перееблись в этих сообществах, ибо на девках с другой касты жениться нельзя. Потому как выкуп (калым) огромный, и денежки уйдут из круга родственников. Ортокузенные браки там в порядке вещей.

[@dimabukinich8617]

@@aleckaleck2492 не знал

[@ВасянДорогин]

Всё как и в Росии

[@bykvskijjevgenijj]

​@user-mk7pv8bb3d тцк ещё не вручили повестку?

[@victoryfirst2878]

I have to say the man is a master motor coil winder. I would love to spend two weeks with him to learn this winding method. Well done Sir.

[@RJHElias]

Come on, this sucks man!

[@soft-techlord]

@@RJHElias it really worth it

[@FrozenHaxor]

@@soft-techlord No need to go to a third world country to learn this.

[@muhammadismailkhan5381]

@@FrozenHaxor Hi hater.... I know how much you are unhappy with your life XD

[@FrozenHaxor]

@@muhammadismailkhan5381 Happy enough not to randomly be chosen to explode :)

[@waynethomas3638]

Did my apprenticeship rewinding motors 40+ years ago ! Brings back memories

[@monkeyflyer410]

Surely the joints need soldering, or is twisting them good enough?

[@FluePeak]

@@monkeyflyer410 Its enought since the coils is stationary

[@เมืองเมือง-ล6ฏ]

i am too

[@เมืองเมือง-ล6ฏ]

@Mã Đan Đan hi

[@เมืองเมือง-ล6ฏ]

@Mã Đan Đan are you youtuber

[@jamessanders9650]

I've been a motor Winder for about 11 years now and it still cool seeing videos like this....

[@baskey12345]

he avoided the chance of changing the bearings....

[@FrozenHaxor]

@@baskey12345 They only do reactive repairs. Only replace the bearing when the old one literally explodes.

[@mqasim1840]

MashAllah bhai Allah ne aap ko bohat dimag diya hai mashAllah

[@simplemechanics246]

Not bad job at all! Extra insulation between windings is good touch. Only they should submerge entire unit to lacquer to be sure about entire unit insulation. Yes it cost more than just tiny bottle of lacquer.

[@abusaidfulus8901]

Is Insulation resistance test not necessary for this electric motor rebuild? It seems that they've only tested it for continuity. I believe there should be corresponding insulation resistance values that need to be met prior to sealing the motor.

[@vrendus522]

Fantastic opportunity to see excellent workmanship and technology. Thanks for the share. Dan

[@EvgeniyN83]

Долгая кропотливая работа, молодцы мастера

[@53filosov]

Примерно так у нас на комбинате сами перематывали.

[@Facekickerr699]

i watched the entire videothrough the thumbnail with a smile on my face at 4 a.m lol. awesome video

[@leroycapeleti2360]

Impressionante! Com mínimos recursos e ferramentas, praticamente trabalhando no chão, conseguiram realizar o trabalho de modo muito satisfatório. Inspirador!

[@fernandogoncalves3147]

Serviço desse muito difícil de fazer! Isso exige técnica, muita experiência pois são poucos que consegui fazer pra ficar Bom. Excelente!

[@MarkAngels]

Esses caras se deixar constrói um foguete só com uma chave de fenda e chapa de metal kkkk

[@rasmusgerdes6822]

Amazing work. But then again, after all that effort, why don't they also exchange the bearings? I also liked the isolation testing, by just connecting a 230V (?) AC live wire to the coils and the casing while checking the light bulb. 😄

[@damianbutterworth2434]

I use a 110 transformer with a light bulb to check 12 volt starter motor insulation. My friend told me it had to be 10 times the voltage of what it`s uses. I thought it was amazing but no solder????

[@ehsanakram8051]

Limited resources brother

[@ПусяВасечкин]

@@damianbutterworth2434 solder may melt and do short circuit inside.

[@Forcex-Tech]

Its a series testing method

[@adityapawar659]

@@ПусяВасечкин but soldering is more advantageous to fortify the joints..... soldering is preferable..... Fibre slives are there to protect them for short circuiting.

[@Johnnywhamo]

The first person that designs some safety sandals will make a fortune :)

[@davehart7943]

Not really. They don't seem to get a lot of injuries, which means safety sandals would be attempting to solve a problem they don't have .. With that being said .. I doubt Poor Pakistani people would waste their money on safety sandals .. So, who would buy these sandals?? Short answer ... *NOBODY* .. 😂😂

[@jorgecortes931]

me quedo admirado de tan bien que trabajan sin tanta necesidad de herramienta,muy conocedores, y lo hacen tan bien, FELICIDADES

[@robsonfiorino6771]

🇧🇷Como um ser humano chega à essa conclusão? Um trabalho cirúrgico parabéns 👏👏👏🇧🇷

[@mustatamihai6985]

Vremea m

[@SimDeck]

I work in a limestone quarry in the UK. If we have a motor go wrong one of our conveyors it will cost us 8 to 10 thousand pounds to get fixed. I see you have no gaurding on your drives no gaurding on your belts or any basic health and safety. It's such a different world. I respect you. Please don't get hurt.

[@Бодроволиц]

Familiar work. In the early 1980s, I made components for electric motors of electric vehicles and did their complete assembly in the experimental workshop of VAZ. In Tolyatti, the last place I knew where it was possible to rewind the engine was closed 12 years ago. Most of the fuss was with the rotors. We pressed hundreds of plates of durable transformer steel onto the cooled shaft. The plates were skewed, the copper inserts did not fit into grooves 96, the gutters had to be processed with self-made elongated needle files. The blades wore out very quickly. Sometimes it took a locksmith a whole week to fine-tune such a rotor. But I liked sharpening and looking at the chiseled figure of a technologist girl who worked with presses and molds for us. And I can still make quick hand movements for many hours without getting tired. This is always the case when technologies and tools are created cheaply and quickly.

[@borghorsa1902]

I bet now you can't find big electric motors in the garbage, someone was saying that in Soviet times you could find a lot of copper at big garbage landfills around big factories

[@carmelpule6954]

I love the honesty of this person and his use of the English language....................." I liked looking at the figure of a technologist girl who worked with presses and molds for us. And I can still make quick hand movements for many hours without getting tired!" I guess many men envy you for such enjoyable work!!

[@CL-vz6ch]

Cool story.

[@АлександрД-ш8г]

как в старом добром советском анекдоте - после сборки обработать напильником)

[@АлександрД-ш8г]

@@borghorsa1902 used to lie just on the ground, now we are looking for it with a metal detector)

[@hakisalhi5317]

تسلم اديكم يا اصطوات شغل جيد جدا احسنتم والله يرزقكم من الرزق الحلال الطيب اخوكم ابو منتظر من العراق

[@user-hz1gt7fo7k]

Todo esto me lo enseño y aprendí de mi padre, prácticamente la misma técnica y con los mismos recursos, lo único que a mi parecer le falto y que nosotros si hacíamos era soldar con estaño las conexiones tanto de los puentes como de las salidas principales, y dejar la conexión estrella por fuera por si era necesario en algún momento cambiar voltaje o revoluciones, 220 - 440 volts, conexión delta o doble paralelo estrella en 12 puntas, también había qué probar su funcionamiento antes de trasladarlo al sitio de montaje parece que fue ayer cuando lo aprendí a regaños y todo pero muy satisfactorio poder hacerlo finalmente. Los más grandes que reparamos fueron de 100 hp Felicitaciones

[@josevega-fs7rr]

Saludos. Tengo varias preguntas relacionadas con motores, me podrías ayudar. Gracias

[@Riwindiag]

❤हेल्लो

[@mohamedfrance6246]

إنه أستاذ رائع رغم الفقر والضعف المادي 👍👍👍👍👍👍👍👍👍🙏🙏🙏🙏🙏🙏🇲🇦🇲🇦🇲🇦🇲🇦🇲🇦🇲🇦🇲🇦 تحية من المغرب🙏🙏🙏🎩🎩

[@nopantsnoproblem1]

that earth short/ continuity testing rig is amazing love your work arounds with the tools you have at hand

[@scootermartir]

قطعا زحمت کشیدی و واقعا بهت تبریک میگم من به عنوان یه همکار از صمیم قلب برات آرزوی موفقیت میکنم و امیدوارم کنار هم رشد کنیم و بترکونیم و بتونیم روزی که اصلا دور نیست به اهدافمون برسیم ممنون از وقتی که گذاشتی و این پست مفید رو طراحی کردی

[@rafaelfreitassantos5534]

parabéns pelo ótimo trabalho que vocês fazem 👏👏👏🇧🇷

[@user-kh1pr2mo1g]

Assalam o Alaikum ksy o bro 😢 Apki vdo abu me pori nai dekhi lg raha ha apki vdo bht achiii hoo gi Allah bless you and your family always 🙏

[@radamesfigueredo2184]

Parabéns excelente vídeo! Poucas ferramentas porém muita inteligência, como dizem: novo de novo. Obs. Só não vi a solda nas ligações.

[@muthupalyammuthupalyam3947]

No..s w g. No. Turn Small..s w g nombar Big...s w g bomber. No

[@adityapawar659]

Guess it just a way to cut the cost

[@faisal5370526]

Good information sharing i like your video 👉😋😋😃😃😍😍

[@abukerar]

بارك الله بك .الكاسب حبيب الله .

[@rolandvasquez7844]

I'm humbled by the working class peoples of india; especially when the family participates👍🙏

[@webpro607]

I think they are from Pakistan not India

[@ryansubbu4008]

I am always fascinated by rewinding electric motors that is working in abnormal places lke quarries cement plants and textile mills. where No ! enemy is dust and load pattern not known. these boys have done a wonderful job. but a systematic sequence of operation has to be streamlined.

[@mohdmiya6555]

O0 .

[@fidelcatsro6948]

i believe they can be rewound to give more energy than what we put into it

[@ryansubbu4008]

@@fidelcatsro6948 In engineering , out put power is input - losses (like friction heat and eddy current etc) it can neve be higher, the best designed motor runs at 80% efficiency when it is new.

[@china-trip]

Wow, I will always cheer for you in Korea I'm looking forward to a great video. Have a nice day.

[@IbrahimMalik-d9c]

Jitni bari motter ho gi utni e asaan hoti❤❤

[@AbdulAbdul-fe3co]

اللهم صل على سيدنا محمد وعلى آله وأصحابه أجمعين في الأولين والآخرين وفي الملاء العلي الي يوم الدين والحمد لله رب العرش العظيم

[@gajananramchandrameshram854]

Great job of motor stator rewinding, hats off to skill of technicians, thank you for sharing informative video

[@rikiroman8658]

I thick people with primitive tools are geniuses they manage to do things and are forced to think outside the box great video

[@wildbill6976]

they're just doing it the way we did 100+ years ago...

[@தமிழன்-ட1]

Great Salute to the skilled person. Sardar ji Namaste...

[@RixtronixLAB]

Creative video clip, keep it up, thank you for sharing :)

[@CarlosRodriguez-sh1ub]

De verdad que.los pakistaníes no me dejan de sorprender que la paz de dios siempre esté con ello AMEEN

[@andrzejporeda7281]

Świetnie i bardzo dobrze jest przwinięty ten cały stojan śilnika pwszechnęgo pozdrawiam twórcę tego filmiku 👍👍👍👍

[@luizpereira8579]

Meu Pai trabalhou por 65anos fazendo este tipo de trabalho muito bonito 🇧🇷🙏🏻

[@ryszardpycinski6374]

Dlaczego nie było etapu suszenia silnika w piecu? Co to za olej był polewany na uzwojenia?

[@nabnabkuringletigio8885]

Gd Dy, WOW nice demonstration😃..frm Philippines...

[@sammiceli7645]

Nice work, always nice to see a young guy learning the trade..... Teach him well. N. E. U. S. A.

[@timothybutler7669]

Great video, thank you. You are the best so far. I'm looking for a step by step, super detailed to learn how to do that .

[@antoniomelendez3919]

Master skills 👍👍👍👍He makes it look so easy but I know it’s through hundreds of times of shear repetition

[@kaliannanperiannan4747]

Bahuth accha hai. Excellent video. I very much appreciate your skill in rewinding. You are a very good teacher. Best wishes Baish!!! Prof P.Kaliannan

[@Soniofficial6m]

Yesterday is history Tomorrow is mystery Today is gift That's why it's called present

[@StorePenh]

Amazing dear

[@Lordismyshepered]

These people are talented & hard workers as well. They can fix anything even w/o no fancy tools. God or allah bless u guys

[@АрнольдШварц-х8п]

Вот это мастера трудоёмко но надо же без всяких приблуд электронных можно сказать собрали в чистом поле одним словом мастера большого уровня такой двигатель оживить просто честь и хвала вам РЕБЯТА

[@ИгорьЗинин-р5к]

А там электронных приблуд и не нужно, мозги, ну и конечно мегаомметр.

[@diegovega6545]

THIS GUY IT'S AWESOME HE KNOWS EXACTLY WHAT TO DO GRATE JOB HE MAKE AN HONEST LIVING GOD BLESS HIM AND HIS FAMILY!!!!!! GREETINGS FROM SALINAS CALIFORNIA USA PEACE ✌️

[@billbob5858]

Love watching guys (and girls - Indian lorry tyre fitter woman) achieve great things with a fraction of the tools & equipment we have available to us in the UK & Europe - real artisans - great work Lads 👍

[@joaoavis3140]

Me pergunto quantos dias este motor irá funcionar! Não estou fazendo crítica, porém faltaram dois detalhes principais. A solda entre os fios que é de extrema importância e imersão do verniz isolante que garante a total isolação galvânica entre as bobinas sem contar que os rolamentos estão com desgaste se percebe pelo ruido anormal do motor.

[@noventa-doscientos-diez]

😂 quieren barato!

[@fidelcatsro6948]

with all that automotive gasket paper used, 20years

[@GarciaSamuel]

Usaron paper dieléctrico, eso es muy aislante y resistente a altas temperaturas.

[@noventa-doscientos-diez]

@@GarciaSamuel existen mejores materiales que ese, ese papel es para transformador, pero para motores chicos está más que bien como de 3 HP o más chicos

[@januszjankowski501]

2 dni z dzisiejszym dniem

[@hhhbkid]

I couldn't work in these conditions. I've wound that stator dozens if not hundreds of times in my career, and I need the modern equipment to do it.

[@slmarqol]

Admiro muito esse pessoal. Sou engenheiro eletricista e é vejo que com o pouco que eles têm fazem um bom trabalho

[@isaquebatera1096]

Sim cara e ainda sabem como fazer tudo sem planta ou esquema eletrico

[@wendelribeiro8215]

Boa noite para todos vcs

[@AbdulAbdul-fe3co]

اشهد ان لا اله إلا الله محمد رسول الله اللهم صل على سيدنا محمد وعلى آله وأصحابه أجمعين في الأولين والآخرين وفي الملاء العلي الي يوم الدين والحمد لله رب العرش العظيم

[@jaspersjoint7433]

Those guys know their stuff! Amazing.

[@konstantinkeptea394]

this is not work, this is art...

[@douglasalonso2440]

Muy chingones Saludos de mecatrónic 🇲🇽

[@MdShamim-tr6in]

বাংলাদেশ থেকে আপনার ভিডিওটা দেখছি ভাই অনেক ভিডিওটা

[@artpassat360]

Молотком, пусть и резиновым и по обмоткам - жди скоро межвитковое, если раньше не подведут скрутки. По всей видимости он его и перематывал - неделю назад :-))

[@Мак-х7ж]

Зато ты в метал бы сдал и покупал бы новый, люди умеют и делают

[@ВиталийКуповых-н8ъ]

Думаю вы ошибаетесь, не бывает такого в обмотке, по-любому формуешь схему, если б железным то да , такое тоже встречалось...

[@inamuddinilikeyourchannel4220]

this gentleman is most competent in his work

[@Rusox100Z]

Solo falta invertir y sería potencia mundial estos chavales valen oro

[@ДиброОлексарад]

Respect for you work. Super Good👍👍👍👍👍👍👍

[@davidmcc359]

Turbans off to the man for that is decades learned skill, but also, labourious undertaking. Amazing to see the ability of those in these less that ideal environments, repairing complex items..

[@はまだあきお]

y

[@CooLDEaFy]

I’m amazing that what they did hard work and excellent replace wires etc. y’all amazing me. I respect y’all doing awesome jobs. Love y’all other country which amazing me. I hate war n hate crime. Which I’m tired see that.. but freedom and work together good hard work jobs that’s inspiring me to watch your videos.. god bless.. from Alaska.

[@juliogoulart2498]

Parabéns vocês são nota 1000 em trabalho, os jovens estão de parabéns.mas estudem também fico muito feliz em ver um vídeo desse.

[@shikharpandey7350]

Brother you doing grate work 👌but when you do connacation use sholding.. love from India✨

[@936v4]

Con herramientas básicas. Impresionante . Buen trabajo

[@commonman8011]

Great work,but you should solder every joints otherwise it will not last

[@johng5295]

Thanks in a million. Great content. Awesome imagination. Grade: A++💥

[@MeetTheSmythes]

Thank you for uploading this very informative video on the excellent innovative skills displayed by very knowledgeable people !

[@endprg6477]

Не долго этому движку работать. Ну хоть у них снова работа будет...

[@chaosplay2569]

После такого перебора движка, его и включать бы побоялся, ибо такая красота, включить проверить можно а последующее использование ну нафиг

[@luisjavierbermudezvasquez2447]

Muy bien hecho ese trabajo, excelente el bobinado del motor; pero le faltó la pinturita para darle más credibilidad, para que parezca recién salido de almacén.

[@shanesmith4087]

I still do this every day in middle Tennessee for a living. However I use a coil winder that is power and a lot less primitive tool.

[@juanmanuelnieves3509]

تحياتي من المكسيك أحب أن أرى مقاطع فيديو كهذه ممتعة للغاية

[@sidneysoterio2374]

Nunca imaginei que fosse assim que se enrolava uma motor, muito show e muito detalhado o vídeo. Parabéns a todos.

[@karalainiloo998]

kiniviliame mocelutu

[@GamingKeenBeaner]

Its so crazy to see people with such skill, living in one of the oldest civilizations on Earth working in such crappy conditions. Imagine what these folks could do with a proper shop....

[@rafiqkatana]

It's a pity they didn't take the opportunity to apply some rust inhibiter or paint it to help protect and lengthen it's life. It seems a simple thing to do after all that work and would mark his business as far better than all the others that *don't* do it. Smart business.

[@ioannismermelas7038]

That's what I do for a living and I paint every motor I repair

[@rafiqkatana]

@@ioannismermelas7038 Nice. It helps so much and looks more professional. You're more skilled than I am if that's your job.

[@FrozenHaxor]

@@ioannismermelas7038 Is it true that china uses aluminum mix in their coils in some motors? It appears to be a running grift with them.

[@paracit100]

я как юность попал, работал в перемотке электро двигателей, у нас даже инструменты похожие были, всё тоже самое, один в один, и ампераж замеряли. и целостность и на корпус)))

[@jaimemar3531]

muy buen trabajo, sin duda eres un excelente tecnicoo en bobinado de motores, saludos desde Saltillo, Cahuila Mexico, animo!!!...

[@786sshaikh]

Safety gear for pussies 😂

[@carlaceres]

Excellent job! Congratulations from Brazil!

[@redstoner2006]

i was honestly pretty impressed by this, my only let down as them not soldering the wires

[@AijazKhan-gl1zh]

Wonderful job Mind blowing fun Good job 👏👍

[@goldy833]

excellent work 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@DkDurjoy-vy4pq]

I am working same department in UAE..your connection system different of my work system...but you are good welder ❤️

[@wellingtonvasconcelos4371]

Parabéns pra você e sua equipe. Quem sabe, sabe.

[@alimuddinali2806]

Ye nili dress pahan kar sabka be vkuf bana rahe hai. Kaise pats ki motor kitna h p ki hai.