Arduino Mecanum Wheel Robot Car | App and code FREE included

[@joshuaolaiya]

Can I just purchase the chassis that included just the 3d printed body, wheels and screw.

[@MechNinja]

Yes sure you can...the link is in the description....😊😊

[@Gookul_Data]

Bro where I can do buy that eheel

[@MechNinja]

You can buy the wheel file from the website link in the description. If you want to purchase the full 3D printed wheel than we have the option in our website. And if you face any problem then feel free to contact us... Thankyou

[@Gookul_Data]

@@MechNinja bro can you send your number

[@MechNinja]

Ok but I can't share it publicly.... Dm me at [e-mail]

[@Gookul_Data]

@@MechNinja tq bro

[@MechNinja]

Your welcome 😊😊

[@othermichigansaturn]

Nicely done, Sir! Very clean design. Cheers!

[@MechNinja]

Thankyou so much for watching and don't forget to subscribe 😊😊😊😊

[@drewlynford256]

This a very inspiring build! Thanks so much for sharing the video and the hard work.

[@MechNinja]

Thankyou for watching it...and don't forget to subscribe 😊😊😊

[@Gookul_Data]

I am doing that project so I important need that bro please share the link bro for buy it

[@rajasekarlee._rs_5412]

Machaaa 😌

[@MikelaMenace]

Hi, Why are there two motor speed references at 100 and 300 rpm? Thx :)

[@MechNinja]

These are for different speeds.

[@actionverse3799]

Can you pls suggest from what material is car's body made?

[@MechNinja]

PLA

[@actionverse3799]

@@MechNinja thnks

[@thomchas]

Hello, I am building this project and I"m running into a problem. I am using the same board as you, and when I upload the code then open the serial monitor I get some info about check sums and such and at the bottom where ip address should be all I get is gibberish. I have the baud rate set to 115200. It does not display a ip address. I have my moble hotspot info entered into the code, and hotspot is on and your app open. Can not find a ip address. Can you help please?

[@MechNinja]

From where did you got your code and app

[@thomchas]

I paid for the code and app from your website.

[@MechNinja]

Check the baud rate in the code and match it with serial monitor... Else try a baud rate of 9600 and then try it...

[@_Ayushman__]

There are 3 servos in the next part so why is there 4 sliders in the app?

[@Gookul_Data]

Please share the link

[@AyanUtech]

You said it's free to download the 3d model,but when I got to the website it told me to buy those!

[@elwinkuriakose6605]

true that😥

[@MechNinja]

Sorry for it bro....but I need some money for all the things to keep going....😊😊

[@elwinkuriakose6605]

Yeah, okay I get it

[@cocinandoconclark]

can i use the same code with a ESP32-CAM-MB and the same configuration from the arduino IDE?

[@MechNinja]

May be it will work if you use proper library file. You can give it a try ... And don't forget to subscribe 😊😊😊😊

[@pinoutuno]

I'll follow this project! Thanks!

[@danzakharov8991]

I have bought your files, printed wheels and other parts, and now recognize that I have the same 4 wheels, but on video and as I know all omni wheels must be at different angles, so can you sand me other 2 wheels (another angle)? I need them very much. I sent you email.

[@MechNinja]

Hii there.. thankyou for the purchase. While slicing just mirror the wheels and you will get the other wheels. If you need any other assistance please let me know

[@kiranspear7185]

Fantastic dude😍😍

[@MechNinja]

Check out my new video......:-)

[@cubersorbit4818]

what is the app name

[@developedmobile4692]

Esp8266 work ?

[@cemalcantuzun7001]

Can you tell me the size of the mecanum wheels?

[@MechNinja]

These wheels are 110 mm in diameter...I have also made a video on 80 mm wheel..you can check it out. And thankyou for watching...and don't forget to subscribe...😊😊

[@cemalcantuzun7001]

@@MechNinja thanks for you

[@MegaFenix888]

Hi! How could we get in touch? I have a few questions about the project and possible cooperation. Thanks.

[@MechNinja]

Whatsapp me at [phone]

[@phamtanduong4426]

what is your app on chplay

[@16harshwardhan_official.30]

Its look like dji robomaster s1 Make a another part and in that just add the gimbal on top of the robot so it will be completely look and work like dji robomaster s1

[@MechNinja]

I have made it....check my other videos

[@onlytech4799]

Can I use phone instead of laptop? I have no laptop 😊 please reply bro

[@MechNinja]

Yes for coding you can use mobile. But you'll be requiring a usb cable to connect Arduino with the mobile. And you can check out any video on KZbin for "Arduino coding using Mobile"...

[@siewkiawTan]

Hi great job! I wana use that for my final year project, could you kindly share the ESP32 source code?

[@MechNinja]

Hii there.....you can purchase the files from the website....it has code along with the files.

[@cmarinv2005]

Muy buen diseño, felicitaciones, sin embargo no deberia mencionar la palabra gratis, ya que segun veo todo lo que se requiere para realizar el carro es de cobro, piezas 3D, codigo, aplicacion.

[@plazmax]

None of them free

[@cmarinv2005]

@@plazmax es correcto, dice gratis pero nada de lo publicado es gratis...

[@k.barathk.barath7769]

Bro can you have report of this project?

[@MechNinja]

Dm me at [e-mail]

[@LogicMathh]

I can maybe try project. :)wait complete this project.

[@MechNinja]

Check out my new video......:-)

[@LogicMathh]

@@MechNinja I watched :)

[@gourabkar5565]

Where is the code

[@MechNinja]

Check the description

[@ahmattaufik5460]

share link code program brother please

[@MechNinja]

The link is in the description bro ...😊😊😊 And don't forget to subscribe 🙂🙂🙂

[@ahmattaufik5460]

@@MechNinja no download link

[@MechNinja]

Bro there is a link the website. So go to it and download from the product menu ...

[@gourabkar5565]

Yes bro I want code

[@MechNinja]

Check the description below

[@LogicMathh]

Nice project

[@MechNinja]

Check out my new video......:-)

[@luanbui127]

Can you show me your code please?

[@MechNinja]

You can check on our website

[@somyagupta4779]

Wow 😍

[@MechNinja]

Thankyou...☺️

[@thespiritoftruth4035]

Hi bro

[@MechNinja]

hiii there.....

[@MechNinja]

Check out my new video......:-)

[@gourabkar5565]

Please 🙏 give me code in comment

[@MechNinja]

Bro apko buy krna padega...mene link di h description me

[@0x19840228]

!!!!!!!!!!

[@MechNinja]

Check my other video too...and subscribe the channel...Thank you...😊