Meet Starlink Gen 3 Router How To Install & Setup

[@jcristina]

Installation & Setup Guide for the brand new SpaceX Starlink Gen 3 Router as a standalone unit or in a Starlink Gen 3 Mesh network. Meet the brand new SpaceX Starlink Gen 3 Router providing faster speeds, more capacity, better efficiency, great performance, and even a built-in ethernet port(s). The current discounted price is $199 and is available for first-generation owners. Here's the direct link: shop.starlink.com/products/us-consumer-v3-wifi-gen3 Here are my favorite WiFi 6/6E AX Routers to replace the Starlink router: Nighthawk: amzn.to/3DnOKqh TP-Link: amzn.to/3pQC6x3 ASUS: amzn.to/3OoaDw5 Watch till the end and take a moment to add your thoughts and please share the video with your community! Don't forget to join my Newsletter: jcristina.com/join Super Chats And All Channel Donations Are Warmly Welcome! Thank You! Get a massive discount with PureVPN by visiting jcristina.com/vpn Speedify.com get 20% OFF when using Promo Code: jcristina at checkout or simply go to my direct link: jcristina.com/speed I truly hope you enjoy the video and find value in it! If so, please consider Thumbs Up, Subscribe, and Becoming A Member Of The Channel! For Media & Business Relations Contact 📧 jcristina.com/contact Thank you for supporting the channel! Interested in any products that I personally use? Visit www.amazon.com/shop/jcristina or go to the bottom of this description for direct links. If you would like to get a FREE copy of the Prologue to "How To Create A Digital Fort Knox - Backing Up Your Digital Life" or one of my other FREE books, simply visit jcristina.com/books Consider subscribing to the channel, commenting below, and signing up for my newsletter at jcristina.com/join Interested in any products that I personally use? Visit www.amazon.com/shop/jcristina or go to the bottom of this description for direct links. Highlighted Starlink Hardware I Have Tested In The Past: Ubiquiti amzn.to/3qC554s NetGate amzn.to/3cXiTTv Peplink amzn.to/3OnTsHM UTT Router amzn.to/3nJBLaL TP-link Router #1 amzn.to/3IjkyhP TrendNET Router #1 amzn.to/3nVukx0 TrendNET Router #2 amzn.to/3IGxvm2 Small Battery Backup For Starlink - amzn.to/3ScbcrZ TP-link AC Router - amzn.to/3so07J1 TP-link AX Router - amzn.to/3sf2or8 TP-link Managed Switch: amzn.to/3EQJKZy TP-link Unmanaged Switch: amzn.to/3FVbaih TP-link Outdoor Access Point - amzn.to/3uqDYfP TP-link Indoor Access Point - amzn.to/3rV6Nzk TP-link Control Module (Gigabit) - amzn.to/3rVBqEx For High-Speed Access Points (ex. Starlink or Cable) TP-Link Control Module (Gigabit) - amzn.to/3rVBqEx TP-Link AC1900 - amzn.to/3Q28y6N For Slower Speed Access Points (ex. ATT) TP-Link Control Module (100Mbps) - amzn.to/3Lduaf3 TP-Link AC1200 - amzn.to/3OLhlsK [ Social Media & Additional Connections ] 📦 20% Off Everything jcristina.com - Code YT20 🆓 FREE eBook jcristina.com/ebook 🌒 Dark Moon Teas DarkMoonTeas.com 🎬 KZbin - kzbin.info 🔖 Twitter - twitter.com/JosephCristina 👀 Instagram - instagram.com/JosephCristina 👨‍💼 LinkedIn - www.linkedin.com/in/josephcristina 📖 Facebook - facebook.com/joseph.cristina 📰 Creative Discord Server - community.jcristina.com [ Equipment Used ] 💎 MB ] ASUS - PRIME X370-PRO ATX AM4 Motherboard - amzn.to/2rmR9LT 💎 CPU ] AMD - Ryzen 7 1700 3.0GHz 8-Core Processor - amzn.to/2pSCx4S 💎 COOLER ] Corsair Hydro H115i Extreme Liquid CPU Cooler - amzn.to/2rfEpJ2 💎 GPU ] MSI - GeForce GTX 1070 8GB Video Card - amzn.to/2rndQ2o 💎 RAM ] Corsair - Vengeance LPX 32GB (2 x 16GB) DDR4-3000 - amzn.to/2qo8PIv 💎 SSD ] Samsung - 850 EVO-Series 500GB 2.5" SSD - amzn.to/2rmXqH8 💎 DISPLAY ] Dell - UltraSharp 34” Curved Monitor - U3415W - amzn.to/2s6pvTs 💡 Video Lighting - amzn.to/2qrDOnH 🎬 Sony ZV-1 - amzn.to/3rFkfFj 🎬 Canon EOS R & Kit Lens - amzn.to/3lEZIC2 🎙 Tascam Mic w/Recorder - amzn.to/39Xb50C 🎙 Electro-Voice RE-20 - amzn.to/37SoBQt 🎙 Zoom H4n Recorder - amzn.to/3oyF2bh 🎙 dbx 286s Compressor - amzn.to/39SLTYY The above are my Amazon affiliate links - if you purchase anything using the links above, you're supporting this channel at no additional cost to you! I appreciate your support!

[@alivia4907]

Your link for the new router won't work.

[@riodenzb.olimberio4568]

should I still have to buy the whole kit? or just the router? because I still have the whole kit Gen 2.. and is it available in the philippines?

[@follywood2]

I don't understand where the starlink mesh system exists to order. Or doesn't it exist?

[@gstar7686]

I've had the version 1 round dishy for 3 years now and it's been very reliable. I'm sticking with that.

[@toddstark3255]

Thanks a lot for the video. I got my Gen 3 early in the week and just now had a chance to install it. One part was not covered by the instructions they sent me and your video above starting at the 11 min mark saved me. Thanks again sir for taking the time to lay this all out basic style!

[@jcristina]

Glad it helped.. Thank you for sharing the channel with others and you being here!

[@mlevass1]

Thanks!

[@jcristina]

You bet! Thanks for being here. Thank you for your support. Truly appreciate it.

[@jcristina]

Many blessings. Thanks again.

[@alekm9795]

I just recieved my starlink yesterday and i recieved the 2nd gen.

[@jcristina]

Yep. That is the newest router. The Gen 3 is o oh to upgrade Gen 1 customers.

[@Donjo58]

I am a Gen 1 user and your router link worked for me. I was able to order the new router. Thanks for this as well as the breakdown of operation and setup.

[@johnnyh4666]

Doesn't work anymore. According to Starlink, only select people who were selected will be able to get one for the time being.

[@jbrou123]

Thanks for the info on the LED indicator. I set up my Gen3 yesterday with great results. But when I woke up this morning, there was no LED indicator, so I thought it died in the night. I did a speed test thru the app and saw it was still working. It's kind of confusing to turn the LED off, even though the router is on and working. IMO, they should leave the white LED on to indicate that it's still connected to the internet rather than making noobs like me think that it's powered off.

[@raymooney6770]

What is the setup for a new Gen-3 router with an existing/working Gen-2 router and rectangle dish? The current Gen-2 setup uses the starlink ethernet adapter to connect to another router that feeds a TV. Thanks for any help!!

[@Mom22-Nonee26]

It would have been nice if you had some one doing what you were saying. We are still having problems trying to connect out Gen 3 router. We got the first part done where you connect the cable to the white power source and to the router. The second cable you plug one end to the router but where do you plug the other end? We only have the upright router and a long cable to the dish.

[@genethesurveyor]

From this message I understand that the Gen 3 Router is not yet being offered with new Starlink install packages, right? So, if I order a new setup now I will need the dongle with my Gen 2 Router. Where does this dongle connect? Is it between the router and the power supply?

[@denniss1211]

Outstanding audio ... thanks

[@jcristina]

Thank you!

[@bryanthomas2352]

@JCristina 6 TP Link Routers jammed it's own signal and didn't work on my 2 acre property. 6 Starlink routers spaced at 70 feet has yellow signal, but works good at 5 MBPS-30 MBPS wifi speed around the entire property. Thank you for your help.

[@jcristina]

🚀🚀🚀🚀

[@mikeperry2561]

Subscribed. You answered a couple of questions I had and was having problems finding an answer. Thank you!

[@jcristina]

Glad I could help!

[@3Dee3Dee]

Thanks!🙋‍♀👏

[@jcristina]

OMG. Wow!! Thank you so much for your support and kindness. Truly appreciate! Many blessings to you and your family!!

[@stevec5000]

What voltage does the new gen 3 unit use, is it still 48 volts or do they have provision for 12?

[@joancastro6071]

I was offered and accepted one of the new Gen3 routers, still using the original Gen1 dish. I know Gen1 can't be used in a mesh network. I'm also using a Linksys node system to try and extend wifi signal but it's not performing as well as I would like. Would a different node system/wifi extender work better in this situation? Full disclosure though, my office/router and nodes are separated by what used to be an outside wall and I am unable to relocate the router.

[@lancebrolin8292]

So I have had two nodes running off my main router wirelessly for some time. I would like to convert the nodes to being wired to the main router (leveraging existing ethernet cables routed through my home). I don't see any specific instruction how to do this - is it as simple as just plugging one ethernet into an available plug on the gen 3 router and the other end into the gen 3 node? I've done this and it seems my nodes are running fast, but I don't see the connection of the node changing from 5 ghz to "wired".

[@rogermckinnon5738]

I'm curious does the new factory reset function in the app do the same as a hard factory reset.

[@jcristina]

Honestly. Not sure.

[@JohnWallace74]

Good video. I decided to run a mesh network using a hardwired cat 8 cable between the nodes. The 2 mesh nodes connect at 2.5Gb. Now from first floor south east side of the house to the second floor north west side of the house I have good WiFi connectivity. Before that I would lose WiFi connectivity upstairs in the north west side of the house because a metal heating and cooling ductwork was blocking the WiFi signal upstairs. The primary node is WiFi 6e and the secondary node is WiFi 6. So I can always get a good WiFi 6 connection anywhere in the house. I have purchased the middle tier internet service which is 600Mb down and I can get that on WiFi with my iPad, iPhone and windows laptop computer.

[@doodlcreative]

is it possible to connect a 3 (main) to a 2 (node) with the ethernet (to ethernet dongle) to create a mesh/extended network? Thanks.

[@jcristina]

Sadly. Starlink does not allow for backhauling.

[@garyamrhein9694]

The power light comes on normally but then goes out after a while. Everything still works though. Also the unit runs pretty warm - should I add a fan to cool this thing...

[@garyamrhein9694]

Just checked with Fluke meter - 112°

[@LeonFiedtkou]

HeyJ,please shed some light on led light on the Gen 3 router should it be off for long periods,because mine is off for very long periods

[@skywatcherca]

Mr. Cristina, I am not a techie, so please be kind when viewing my question: I want to upgrade to a gen 3 router - I presently have a gen 2 router. Is using the gen 2 router as a node, as easy as running an ethernet cable from one of the 2 ports at the back of the gen 3 router to the dongle ethernet port on the gen 2 router - is it that easy? Thank you Sir.

[@tereasahoutz8750]

My question is can you use your main wire used on generation 2 that goes to Dishy to generation 3. My wire is through the wall

[@jcristina]

Mine is too..

[@richhuntsd12]

Very well done video. Gave it the thumbs up. I have a question. When you install additional Starlink routers or nodes do they have to be hard wired together or are they wireless but using the POE?

[@Victoria-x6k6i]

Hello, I have tried setting up my gen 3 router using your instructions and it shows on my device but connects with no internet. The light indicator on the gen 3 unit continues to flash white. Any help would be greatly appreciated!

[@jcristina]

Make sure all of your wires are connect well. I would remove and plug back in and then factory reboot/reset the unit and see if it finds the sats. Might be defective if not. Sure link up pretty quickly.

[@SkipMichael]

Will I have to have new cable from my anntena to my router?

[@Mom22-Nonee26]

Can you make a video with someone doing what you’re talking about on how to connect from gen 2 to gen 3. We are having problems connecting to gen 3 . We’ve tried 3 times already but no luck. We’re thinking of returning the gen 3 back to Starlink

[@jcristina]

@@Mom22-Nonee26 Gen 2 and Gen 3 use different cables if I’m no mistaking.

[@Mom22-Nonee26]

@@jcristinathe gen 3 came with 2 cables. We didn’t know we needed the Ethernet adapter, so we bought one and followed the picture but it didn’t changed the router name back to StarLink and when I looked at my starlink app on my phone it shows the upright router and not the horizontal router. Could you please make a video with someone demonstrating the steps. Not tech savvy around here

[@mel_tillis2]

I subscribed. Thank you very much for the great English and informative video! Looking forward to more of your Gen 3 videos since I just got mine today!!

[@markratliff7991]

Can the Gen 3 router be configured to broadcast a separate 2.4 Ghz frequency as well as a 5 Ghz? I currently have multiple "smart" devices (switches/plugs) tgat will only connect to 2.4 Ghz. I am considering switching to Starlink as my ISP vs At&t and not uses tge At&t router

[@jamesallen5627]

Hi there !!! Please please can you show me how to set up a gen 3 into a gen 2 system as main router. I have the PoE and I tried bypass mode. Can only get it to work in mesh mode. Love the channel, love Starlink.

[@trop7490]

It is possible to connect a 3 rd gen startlink mesh node to a starlink 3 rd gen router with an ethernet cable

[@johndicarlo5620]

Does the Gen 3 router support ethernet backhaul? I would rather connect use them as access points wired into my network. Is that possible?

[@jcristina]

Don’t believe so. Sadly.

[@larryl7114]

can i hard wire a node (starlink 2 rounter) 200 ft away over cat5 cable ?

[@AbsoluteKidder]

If I own a WiFi 6 router that i use with my Starlink. Would I notice any difference with WiFi 6E? I do have WiFi 6E compatible devices

[@livelongandwander]

For those of us using Starlink in a motorhome, physical wiring into another router is a PITA. Limited number to devices etc. so we just need to use in the most secure fashion possible

[@phpprodesign]

what about eero mesh by amazon. I bought a eero 99.00 mesh unit. what cables do we use. I have to have a cat cable for my security system. and i will need 2 ehternet portds how do i do it.

[@Paladin1873]

I finally managed to convince Starlink's website that my address is real. The only bummer is I could not order the new Gen 3 router. It has been restricted to a handful of US users by invitation only. 😞 I did include the ground mount, extra cable, and Ethernet adapter, so I should be set. Now it's time to hurry up and wait.

[@jcristina]

3rd Gen is only for 1st Gen customers to upgrade.

[@jogamingchannel86]

@jcristina my brother want to buy gen 3 router to connect to our gen 2 but we need a adaptor for it if we do this will we able to use wifi 6 or is it better just to replace our gen 2

[@alivia4907]

I just got my starlink yesterday.. As u can probably guess I'm wondering, why didn't I get the latest router? I waited over 2 1/2 years for my turn to come up. Any suggestions?

[@jcristina]

The gen 3 router is only for the Gen 1 customers as of right now.

[@alivia4907]

@@jcristina Oh OK. I didn't get to finish watching the video and thought gen 3 was already out replacing gen 2. My mistake. Thanks for the info. I just found your channel yesterday and I appreciate the effort you put into the videos.

[@rebekkad.2092]

So this new router will work if I have a round dish? Or do I have to have a new rectangular dish?

[@johngrady8541]

ok so did all this and got red light . device connects to router but a few seconds later says no internet connection . you mentioned pinout . cat 7 from dish power supply to gen 1 100 feet worked ok . I just moved router end to gen 3 . Is the cable into gen 3 a different pinout ? why the red , dish was fine round one . it never asked me for password either

[@jcristina]

It could be acquiring signal and will come online with in a few minutes, up to 15 minutes depending. If not, I would factory reset everything and start over. If that does not work either, their could be a hardware problem and it would need to be replaced.

[@pauluduji2517]

Hi, Does Starlink allow Port forwarding and how can I use it with Mikrotik Router to be able to perform port forwarding

[@Bchew762]

Wait, how does the new router plug into the dish? Or is it a new dish too? Can you use the same square dish?

[@jcristina]

Plugs into the POE via Ethernet.

[@Bchew762]

@@jcristina so is the plug the same from the router to the dish?

[@redherring87]

Small correction, you only have to quickly press the reset button once vs holding it for a few seconds. Great video though!

[@danin8658]

New Router has to be 150 feet from the main router Before I buy gen 3.. wanna make sure it’s actually gonna work without a cord bc the main router doesn’t have another plug to connect …it has to be wireless If it’s plugged in near the orginal … connects… then brought to plug in 150 ft away.. will it work?

[@CandiceWA]

Hello J, I have cat6 in the wall frames, are those cat6 cables good enough for the Gen3? The 75ft cable Starlink sells on the website, is that the same cable for the new dish? Thank you for an other helpful video!

[@ptrenken]

Is there a way to use gen 1 as a node, if not what should I do with it?

[@tray8411]

I go to my Starlink shop and I still cannot get access to purchase a Gen3 router.. Any suggestions? Thank you!!

[@jcristina]

Keep trying back.

[@devincurrie4145]

What's the average latency for Gen 3 router using the Ethernet port? Need reliable and stable video connection for Zoom, video chat, etc.

[@EugeneThomas-k6f]

Hello, I have a question/comment. I looked at the information on the Gen3 router on the Starlink site under installation. It indicates that if you have a Gen2 setup you need to have the Ethernet adapter and use the Gen2 as the PoE injector for the dish and then set the Gen2 in bypass mode. There is no PoE injector for the Gen3 at this point in time. If you have a Gen1 setup you just swap the Gen1 out and the Gen3 in as there is a separate PoE injector with the Gen1 setup. My question is how long do you think it will take Starlink to have a PoE injector for the Gen3 standalone setup? Maybe the PoE for the Gen1 can be ordered separately. Not sure if it will deliver the required power to the Gen2 dish though.

[@louiekee7104]

Joe, I just bought a multi factored situation, and I absolutely love your videos so I tried to find one that fit my situation…. Either you haven’t made one, or I’m just not seeing it….. I have Starlink for internet, and ring alarm and cameras for security, and I watched and saved the one with the TPLink mesh network to extend the wifi…… But do you have or can you make a video to tie all of those in together please Sir?… 🙏🏻🙏🏻🙏🏻🙏🏻

My new Gen 3 router does not have any Ethernet ports. Your video said there were 2 if I heard you correctly.

Great information by the way.

[@jcristina]

Look under the DOOR... There is a COVER..

[@jcristina]

Thanks so much Lisa!

Oh for heavens sake. I didn't realize there was a door. THANK YOU!!!

[@donaldonuoha4268]

Great job and detailed explanation!

[@Ezzell_]

If I installed the gen3...can I use my gen 2asxa mesh?

[@petermccool9396]

Great. I just ordered last week. I'm guessing gen 2. My sub conscious was telling me to wait. I had trouble using my debit card. Usually a red flag not to continue, for me. Slow internet and impatience I persevered with payment. The gen 2 should be fine. I have a new HiKVision router which I will setup in WISP mode and should be good to go.

[@mommacass7325]

How can I unplug the router cord to dish

[@edbach7221]

If you get an upgraded 3rd party router would you still need to upgrade the Starlink router for max speeds?

[@fausttsuaf9418]

thak you for your generous posts. so helpful. one comment regarding 'the hard cable is always better than wifi'. generally obviously that's true. but sometimes especially if people use docking stations for their computers, the docking station could have a speed limitation, which wifi does not. so i would say always test out the speeds in doubt....thanks again!!!

[@snake4usa]

Just ordered my starlink going around about a week

[@viscommcd1]

The video didn’t even show the starlink kit or how to connect it or what it looks like connected or anything to Dow you setting it up. It was just a bloke talking the whole time

[@karenwilson5929]

This video was very helpful. Thank you!

[@jcristina]

Thank you for being here.

[@41Atatsiak]

You’re the man, thank you for this video. 🎉 Tempting, tempting, tempting product.

[@SalvatoreFisher1234]

Nice video bro. My starlink still going strong .

[@jcristina]

Awesome!!

[@NODODRONE]

i bougth starlink in ebay, and and how can i activate it? i have problev with activation there is "Device already assigned" what can i do?

[@nicholasmorris4013]

So if you get the new router can the old router be used as a mesh?

[@ninja14warrior]

Hi @JCristina is there a way to upgrade hardware? I have the first hardware of starlink.

[@jcristina]

As soon as it’s available to you. Check the URL provided in the description.

[@ninja14warrior]

@@jcristina Thanks 😊

[@davidsonbrevilus1553]

If i order now at the Starlink website the internet equipment they will send the gen 3?

[@jcristina]

No. You’ll get the 2nd Gen.

[@eltoronegro]

Being on the waiting list to get starlink, I wonder if it will come with the gen 3 router. Great vid btw.

[@acatismansbestfriend5719]

We just got ours off the waiting list 3 days ago and it has the vertical and not the horizontal router so I am assuming we won't get one for another couple years. LOL!

[@alivia4907]

I got mine yesterday after over 2 1/2 years and I got gen 2.

[@mikegrady6089]

If you are in bypass mode can you still use the Gen2 in a mesh setup?

[@Zircon10]

Do any of these Starlink routers support VPN protocol? Can they pass through VPN from another brand of router?

[@jcristina]

I do not think so. I would recommend a third party router.

[@oscarvalmart]

If I purchase starlink as of today, will i get it delivered with this gen 3 router?

[@dawn_keyes]

Probably not, just got my starlink today and its gen 2, it only took 2 years and 5 months. Haven’t even hooked it up yet because I have to order mounting hardware.

[@jefferyshall]

The link to the new router doesn't work. Getting a "Product not found" message. Thanks for the information!

[@follywood2]

When I go to order Starlink. There is no option that I can find to purchase any accessories like the mesh. There is one single box to order, which is the router and dish.

[@andersonifeanyi3860]

Please how can I generate key for different user

[@mlevass1]

So if i understand I have my Gen 2 router and one Gen 2 mesh node, so when i am able to get the Gen 3 router can i then move my Gen 2 router into a mesh node status? As always great content. Thanks. And mo tea time today you must have been excited to get this out there😅😅😅😅.

[@dt7286]

Thanks for the update. You are the guy I watch regarding StarLink issues.

[@jaycerd24]

So you can’t upgrade your gen 2 to the gen 3 router correct?

[@keithcorreia5937]

My Starlink is saying my Router is unreachable ..is this normal? My internet works…but I am also unable to access my Network? Is there any way this can be corrected? Thanks.

[@joanne2006]

Did you figure this out? My router and dish have both been unreachable for 24hrs now. I’ve tried everything. The factory reset button doesn’t do anything either. I contacted support, but I may reach retirement age before they reply. I ordered a third party router on Amazon because I work from home and cannot afford to be without internet, but I don’t even know if it’ll actually work.

[@dmckeen]

I legit just ordered and received my gen 2 about 2 weeks ago an now there's a better one out...

[@stevengreer3339]

Very informative. Thanks!

[@jcristina]

Glad it was helpful!

[@denglerclaudia]

Can I use the original gen 1 router as part of my gen 3 mesh network?

[@jcristina]

Yes you can according to my knowledge.

[@robertsherwood8806]

Since it is a Tri-band, I wonder if they automatically use one band as a backhaul to the other nodes?

[@johndicarlo5620]

Better yet Ethernet backhaul. I wonder if thats possible now with the builtin Ethernet ports.

[@plumber0072]

Will the gen 2 cable work on the gen 3 router

[@JavierHernandez-b5w]

JC. Thanks for all the useful info. I have a question. Can I use Linksys wifi routers as a mesh network with this new gen3 router?

[@josephrogers5337]

Thnaks for the heads up. I have gen 2 and it is working ok at this time. I have the dongle to setup a second router and on that second router if starlink connection is down during an electrical storm (only times I have lost starlink) it show a led on my third party router shows amber indication I have no internet connection. I will have to wait for when gen2 can get gen3 to findout if a new cable has to be run to the (rectangular) dish on the roof. A difficulty now that I am 81 and watch what I would have done 20 years earlier.

[@jcristina]

Perfect!!

[@mpwieland]

How many Volt the Router, passive?

[@jcristina]

Good question.

[@chigozieeke-okoro1745]

Please can you recommend a good third party router that has all the features yours have?

[@sakongphil]

As for me, i recommend Mikrotik RouterBoard. It has all features that one needs but you must be have the training or tutorials on how to use it because it has a whole OS like software inside

[@Roadracer86]

I just got my Starlink system with the gen 2 router.... sucks I didn't get the 3.

[@jcristina]

You can’t. Gen 3 is only an update to gen1

[@karona7749]

Our third gen is setup. Why does it say unsecured network?

[@jcristina]

Very strange. Never heard of that.

[@bowragak]

For some reason in Australia that link does not take us to the product.. when we click on the shop tab all we can see is a link to buy another full dish set

[@toddhill6992]

Will gen 3 router work with gen 2 wire?

[@jcristina]

No.

[@coolmaster678]

With the gen 3 I can connect multiple router to it

[@coolmaster678]

So I can connect 5 router to my starlink to get internet multiple room?

[@ElliottPaull]

Are the ethernet ports gigabit or 2.5 on the new router?

[@rudestan11]

It is not yet in the shop app .

[@jcristina]

Make sure you’re a Gen 1 customer. Gen 2 can’t purchase yet

[@gabrysur]

The gen2 router is a copy of an apple product. Not only did they remove the ethernet port, but they also changed the antenna cable to a proprietary connector, whant to know a dirty secret? Is still an ethernet cable, you can cut the dish cable, wire an rj45 connector, connect it to a POE power supply and you can connect that directly to any router you want so you can throw away that terrible router.

[@Recovering_Californian]

I'm on Gen 1 and I use Google WiFi mesh with it. Works great. The link didn't work for me. Says product not found. Maybe not all Gen 1 customers have access to Gen 3 yet.

[@walterdolen7169]

Same for me, product not found, even though I have gen 1.

[@jcristina]

You could be right!!

[@jcristina]

I’ve heard this many times. Must be a test run for “specific” locations and Gen 1 customers. Guessing.

[@BobJacobson]

Sounds typically "Musk-Complicated." We're fine with Gen-2.

[@Jennifer-007]

Same here, gen 1, Product Not Found

[@akaimon3]

Please provide link to the router you are currently using. Thanks

[@livelongandwander]

You need a shirt with a Great White - MegaByte

[@jcristina]

Love it!

[@marcpeninou5879]

Great video, I have gen two, but a big house, so hoping for the gen 3 then I’ll try to set up my mesh network.