Mega Moto hydraulic brake ,street tire and Sprocket hub install pt. 3

Mega Moto hydraulic brake, street tire, and Sprocket hub install pt. 3
Installed a Hydraulic brake on the mega Moto/Monster Moto stretched frame with a street tire and a universal sprocket hub.
Instagram - Doubledown555Black66
_____________________________________________________________
Parts used -
Universal sprocket adapter - www.gopowerspo...
Ultimate Street tire - www.gopowerspo...
Hydraulic brake - www.amazon.com...
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

[@JVScustoms]

Man I’m so stoked just ordered my mega Moto today.. got that Black Friday deal for $287 roller. Can’t wait first thing im doin is what you did with relocating rear axel and handle bars. Thanks for the awesome videos man, you make it look so easy

[@Black66]

Awesome! I hope you have just as much fun as I have had building this thing.

[@mikhailjairnisbett441]

dang that was cheap, I'm about to order a suspension roller right now for 347 or smnth

[@SpAcEcruizer203]

woah man u just scratched up those nice mega moto wheels lol youll be swaping those for the ten inchers in no time i bet anywhoo something is scrapping u can hear its like sharpening the rotor lol

[@Black66]

Actually, I'm gonna be putting totally different wheels on this bike later on. I like doing stuff that is different from the norm

[@SpAcEcruizer203]

@@Black66 real violent with that pry bar lol jk

[@NVScrapper]

Another great video! I think you should name this one "The Black knight" :)

[@heathenprojects2639]

This is a must on this bike the stock brake sucks

[@thirdgenmacgyver2626]

I also added a gusset from the frame to the engine plate on each side, tucked all the way under the peg bar. The first 15 hours of the predator 212 low rpm mild build cracked the welds where the engine plate and foot pegs tie to the frame.... Just my two cents, also if I had a way to send you a pic of it, I would, just saying..

[@fatbuddycat]

Nice job Friend!!

[@albertpeterson7134]

Black66 Iam Really Enjoying This Build. And I Like Vise Grip Trick On The Tire

[@Black66]

Thanks! Ya, that trick has helped me out a lot!

[@johnk6346]

About time you put slick tires on your bike. I guarantee that will add some speed on your next speed run

[@mlindsay527]

Looks like you managed, but next time put the axle bolt in a vice and slide the wheel on it. Really helps when the rim is held firmly. Also use some soapy water to help the tire slide over the rim.

[@lingyguisar4149]

The Tillotson 225 motor on Go Power Sports would be nice in that. Now that it's back in stock. $800 motor tho!😆

[@Black66]

It would be nice. I'm going to build a stroker for it. It's a mix of quite a few parts

[@Spookylator20]

Dam wondering if that adapter fits on a super pocket bike size 8 rims

[@fuze9524]

Amazing good job man

[@tristan3479]

U should put hydralic brakes on the coleman cc100x

[@trentonjackson8874]

If you order it how long will it take to get to your house

[@Black66]

It took less than a week to get there.

[@anthony7184]

Couldn't the caliper mount just have been flipped over vs cut?

[@stanlucas665]

Are those the 8 inch wheels and tires? Man, all those tools and technology and all you have is an airbrush air compressor 😂😂😂 You need to make a run to Harbor Freight and Tools to get a little bigger compressor. All kidding aside, been there done that. Keep up the awesome tutorial videos, they’re damn good.

[@Black66]

They are 6 inch wheels and tires. I have a compressor. Its just easier using the small one lol

[@janicefullerton6201]

Well sir I have watched all these videos again hopping I would hear 👂 the name of a company or price. No such luck I guess I will just look into what Go power spots has to offer but still love your videos keep up the great content 👏

[@Black66]

Thanks! The links to the parts are in the description of the videos.

[@UnAttempted]

You should get a clutch brake

[@keithbrown7088]

Badass👌🏼

[@orionzzz1651]

I’ve been eatting thru break pads with my 224 what would you recommend to keep that from happening so much ?

[@Black66]

Maybe a bigger two piston brake.

[@sensisensei5201]

badass man 🙌🙌

[@Black66]

Thanks!

[@jimcornish242]

I think that hydraulic brake kit is the next mod for my MM80 too... where did you get that frame kit from? I noticed you have the steel wheels, and my GPS sourced kit has the MM80 "mag" wheels

[@Black66]

The kit came from Gopowersports. It's the rigid frame. Their kit with the Front suspension has the mags.

[@jimcornish242]

@@Black66 oh yeah, I forgot you had the rigid front end ..and I just watched the vid the other day where you cut the fender mounts off of it too (I can't decide if I want to run the fenders or not) .....did you know GPS has the suspension forks on a black friday sale for $89?

[@Black66]

@@jimcornish242 Yes, I looked at that. I'll probably add them later on.

[@JVScustoms]

Hey what size pilot jet do you run on that flat slide 24 mikuni? Mine bogs or hesitates on take off if you don’t ease into it or roll into it. I’ve got a 125 main jet. Thanks man I wish I knew half the stuff you’ve forgotten about small engines

[@Black66]

Thanks! My bikes are all different with the different set ups. Most of the time I have to bump the the up a size or two. You could always grab an assortment of jets and find out which one makes it idle nice and smooth with the air screw 1 to 1/3 turns out. Maybe 2.

[@masenist]

I know im super late to this video but if you dont mind What size are those 6 screws you are using for the sprocket and brake disc on the wheel, i have a motovox with the same wheel and im using a Standard screw and its super loose it screws in but wobbles around inthere and backs out within 15 min of riding, but metric wont fit its to tight,, im super confused. THANKS

[@wadewehunt502]

How far apart do those axle mounts on the back need to be?

[@Black66]

If you take the axle , spacers and mounts and bolt it all together ,you can hold the assembly up to the frame and mark where the mounts need to be welded.

[@timheller5929]

will those tires fit stock wheels? my tire says 145/70-6 the tires like yours on Go Power sports is a 13x5-6....will that work?

[@trentonjackson8874]

What the fastest one y’all tried I’m tryin to get one for my birthday

[@Black66]

So Far the Azusa bike is the fastest. I think the Mega Moto will be faster.

[@trentonjackson8874]

How fast is it

[@Black66]

@@trentonjackson8874 Not sure. Haven't finished the engine yet.

[@trentonjackson8874]

How fast is it with the engine it come with

[@Black66]

@@trentonjackson8874 Only a frame, no engine

[@ezekiel8915]

Hey again Black66, Is there a way you can spray paint a rear sprocket?

[@Emersonsoutdoorzyworld]

Where did u get the rims at?

[@Black66]

GoPowerSports

[@wadewehunt502]

How far apart do those axle mounts need to be on the back?

[@romeopena5959]

Where can I get that caliper mount that you cut in half?

[@marshaunmurph4158]

What tooth sprocket are you running??

[@Black66]

Check out the Mega Moto playlist for all of the combos and sprockets I have ran on this bike kzbin.info/www/bejne/jJPGoXRmn8mGf9k

[@marshaunmurph4158]

@@Black66 ok will do

[@mklein5179]

Is your welder 120 or 220??

[@Black66]

120

[@mklein5179]

@@Black66 you sure get good current!

[@blackbeard0074]

This stuff sucks wjen u dont have a welder

[@Black66]

I have seen some fairly inexpensive welders over at Harbor freight and on Amazon.