How To Install Hydraulic Brakes On A Minibike

[@Guido19]

If This Was Helpful SUBSCRIBE! Chris Fix's One person brake bleeder kzbin.info/www/bejne/Z6jaomSModBnjck My video on how to bleed and fill them up with fluid kzbin.info/www/bejne/Z3qkoJqvqK-dj8U

[@jacobhargraves1221]

@David Pinto send me the link

[@Guido19]

@David Pinto yes it is

[@Guido19]

@@jacobhargraves1221 in description

[@eddiesheeran5791]

Great video man, super thorough & informative! 👍

[@Guido19]

Thank you!!!! Much appreciated!

[@joshuanichols1816]

They must have listened to you I just got mine in today and it comes with the little nut for that bolt the spacers needing trimmed are still an issue but all and all it’s a great kit

[@aventurasdcp2177]

Very good video, we had to make the mounting base

[@-wc4vy]

Can you tell me what the nuts are called that you use to mount the brakes?

[@Guido19]

@@-wc4vy I just used Alan bolts with nylon lock nuts

[@leomartinez-z5k]

mine didnt come with a bracket

[@Guido19]

you might be able to get one from gopowersports

[@droppedltz9131]

Do you have a link for the brake pads

[@Cobyyys]

will the kit bracket thingy work for a orxy earth

[@Cobyyys]

all i need is the bracket is there a link for just that

[@Guido19]

im not sure

[@srcobra50]

I wanted to order that studz kit but it kept showing me out of stock. Il try again soon. Great video. The go power sports one doesn’t include the bracket which is what I need

[@Guido19]

Thank you they will be back in soon

[@Guido19]

If you want to see more minibike content subscribe

[@devonfretwell3351]

Go Powersports now sells the kit. I bought mine from gps before they had the bracket and had to fab something.

[@obsdually54]

U literally drop this video right after I get mine and take forever to put them on like cmon bro hahaha good video tho

[@Guido19]

Yeah I did a lot of talking because people are stupid and get stressed out when I do the steps😂😅

[@manuelguisar6009]

Will this kit work with a motovox mini mbx10???

[@Guido19]

Yes it should!

[@radleyjabilona3806]

Again your mini bike vids are dope 😱 You should do more videos of this bike off roading

[@Guido19]

Thank you... That would be dope but if I tried it would get stuck or It would just spin out sadly lol😂😂 but If I get a dirt bike or something like that there will definitely be offroading videos!👍👍

[@GPMAX01]

Do you have a link for the Phone Mount and also the two breather filters you used for the swap?

[@Guido19]

I got the phone mount on Amazon but they dont sell it anymore. The breathers I got from auto zone

[@Bysitter_]

I know this is a old video but are the two separate links the same ?

[@Guido19]

No the first link is the gopowersports brake kit that didn’t fit without modification. The second is the one which bolts up 👍🏼

[@adrianabeyta7596]

Do u have to take the stock brake bracket off? Will the brake fit on the stock one?

[@Guido19]

Yes it should work but if they sent a new one I would use that one. All of the brakes are different so you will have to look and see

[@wyattc6083]

Have you had an issue with the pads falling out at all??? I bought this kit and Everything is lined up perfectly but I cant seem to get them to stop falling out

[@Guido19]

That actually happened to me once when I was riding and I couldn't stop going 35 mph! It was scary lol. What the problem was is my break pads were worn down alot so I replaced them and it hasn't happened since. If your pas are fine. Take the break off and take it apart and take the pads out and press the break. Your piston will push out a little and reassemble it and it should be fine.

[@wyattc6083]

@@Guido19 this is when its brand new havent even put the engine on the bike yet haha. And it works fine at first when compressing but if you try to hit the brakes while moving it just take the pad right out

[@Guido19]

@@wyattc6083 that is so weird. I would try to return it or something because that sounds like something is faulty

[@kaidyn671]

Where do you get the street tires

[@Guido19]

I got them from gopowersports.com

[@kaidyn671]

@@Guido19 what rim you uses

[@Guido19]

@@kaidyn671 I actually dont know. It is the stock monster moto one

[@kaidyn671]

@@Guido19 ok

[@devonfretwell3351]

@@kaidyn671 it’s 6 inches. The tire size is 145/70-6

[@lancedmemes2255]

Where did you get the axle spacer?

[@Guido19]

It came with the kit!

[@thecamshaftcrew7754]

Nice vid man. thanks for the info. btw what type of camera do you use to record your stuff cause ive got the same frame with a 212cc tilitson racing engine and im trying to make my channel pop! My camera quality sucks

[@Guido19]

Thank you. I record with my phone... Lg g7 thinq but ill be recording with a gopro if I get one for my bday. More content will be coming out so subscribe!

[@PotAndPoltergeists]

thanks gang i got mad cuz i didnt know i needed a bracket 😭

[@devlowery4182]

We’re did you find the red thing

[@Guido19]

On the thumb nail or in the middle of the wheel?

[@AlexanderGarcia-my2qd]

GPS really does need to update their website lol i have to call their store every time to make sure im buying the correct parts for my tilly

[@Guido19]

Yep! I totally agree! I ordered a few parts that were described differently than they are.

[@michaeljrstollsteimer579]

Ay man what brake pads do you use for the hydraulic brake

[@Guido19]

I was useing the stock ones that came with the kit but now im useing the copper preformance ones from studz raceing

[@michaeljrstollsteimer579]

@@Guido19 ok thanks

[@Guido19]

@@michaeljrstollsteimer579 no problem

[@williambeckham3447]

If anyone else is wondering you can also get a clutch brake and it works just as good

[@Guido19]

Ehhhh not really. Wouldn’t recommend as they don’t work that great at all if your pushing a lot of power like us and going over 45mph. They also rely on your chain too so if it were to fall off your screwed also clutch brakes are bad because it stretches out your chain a lot and puts unnecessary wear on parts. We’re doing 65mph+ and this hydraulic brake isn’t that great anymore. When I was stock going about 40mph this hydraulic brake was as perfect but I need to upgrade as it’s not adequate.

[@MultiDragola]

I bought one and my back snapped off first ride

[@Guido19]

Really? That’s crazy haven’t ever had any problems with mine

[@jacobhargraves1221]

Bru if you want to go faster I know where to get a smaller sprocket that will fit that bike

[@Guido19]

Yeah, thank you man. I just bought one and a video will be posted on it soon👍👍

[@Christmastime-f8q]

You skip the entire installation