Mega Moto Mini Bike - RLV Muffler Install and Sound Comparison

[@NubsWithGuns]

1:57 Behind the chain guard where the heat shield bolts up is where I have seen more than one braced.

[@MikesMiniMotors]

Thanks for the info!

[@steelthiele2317]

Good sound quality! Thanks!

[@MikesMiniMotors]

Thanks for the feedback! I'm glad you liked it! 👍

[@garrettbailey860]

I was having the same problem with my clutch, but I put performance oil on it and it fixed it right up.

[@MikesMiniMotors]

I had read about that, but never got around to trying it before buying the torque converter. Thanks for letting me know it works though! Maybe I can bring that clutch back to life a bit.

[@NubsWithGuns]

Not for long if it was grinding like that one I don't imagine. But wait you will reply and say you're still using it anyway so....

[@jordanvernon3084]

Fender removed of course I wanna know if this exhaust fits the mega Moto, rt200/b200

[@MikesMiniMotors]

I’m not sure if it fits or not, sorry.

[@nate.ourada]

what exhaust is this? i’ve been looking for one to fit under my seat for a while

[@MikesMiniMotors]

The header is the trumpet header from GoPowerSports.com www.gopowersports.com/header-pipe-trumpet-196cc-212cc-225cc/ The muffler and kit link are in the description of the video, if you need those as well.

[@tk429]

What header is that?

[@MikesMiniMotors]

The header is the trumpet header from GoPowerSports.com www.gopowersports.com/header-pipe-trumpet-196cc-212cc-225cc/ The muffler and kit link are in the description of the video, if you need those as well.

[@Mason-Dain]

Sold

[@MikesMiniMotors]

👍

[@yourdaddyac3784]

Where you get your sprocket? And did it make a good difference?

[@MikesMiniMotors]

I got the sprocket from GoPowerSports www.gopowersports.com/split-sprockets-35/ It did make a good improvement when I had my centrifugal clutch, but now that I installed the torque converter, I may need to change it up a bit again.

[@Wh0M1k3Stn3]

Is the kei truck yours?! Let's get a walk through on that beast one day!

[@MikesMiniMotors]

Yup! That's my truck "Sparky". You can see a quick overview of it in this video: kzbin.info/www/bejne/mWG9iJecftCNl5o I haven't been able to do much to it yet. It has a motor is it that was only put in them for about 10 months, so finding parts for that engine are really hard!

[@Wh0M1k3Stn3]

@@MikesMiniMotors sparky is pretty sweet! Sounds like a great candidate for a motor swap to something more reliable! Ev swap would be fun and fit the name well! Not sure how well it would work size wise but a 3cyl diesel Kubota motor would be awesome to see too. Then you could change the name to "smokey"

[@MikesMiniMotors]

Haha, those are some good ideas! Of the swapped Kei trucks I have seen, they usually have to cut a hole into the bed of truck for the motor to fit, as the stock motor almost lays on its side to fit under the cab. I am trying to avoid that, as I would like to keep the bed intact and functional and also retain the 4WD.

[@Wh0M1k3Stn3]

@@MikesMiniMotors maybe a boxer motor like an EJ22 from a Subaru or a motor and trans from a Honda golding motorcycle?

[@MikesMiniMotors]

The boxer motors did come to mind, but I am not sure if it will fit. I think I have a ton of research in my future!!! Haha😆😃😜

[@bgmoody3517]

Why would you cut the header support 🤦🏽‍♂️

[@MikesMiniMotors]

I cut it because that was my personal preference. I know they are supposed to mounted differently, but I am not a fan of that way aesthetically. Would it be more rigid the other way, yes, of course. But, the way I did this, the header is still supported a little bit (to itself) and I have been running it this whole time this way with no issues.

[@NubsWithGuns]

What makes you think he needs to follow some rule?ROFL All it does is hang the header, doesn't matter if it's an inch long if it does the job hehe.

[@dt9094]

Are you going to spray the sealant on the header wrap?

[@MikesMiniMotors]

This header wrap did not come with any type of sealant, so I just wrapped it.

[@dt9094]

Thanks for 5he reply, I’ve used “ DEI” products and they do say to spray this coating on. But to each their own. Nice vid 👍

[@MikesMiniMotors]

@@dt9094 What's the point of the sealer? This is my first time using header wrap, so I had no idea there was any kind of sealer...

[@dt9094]

@@MikesMiniMotors that’s what they mentioned to me. I guess u don’t have to but it’s like a second skin that kind of glues it together. I’ve used it in a couple of builds and it works. But it kind of finishes the wrap off. 👍

[@MikesMiniMotors]

Ah, well thanks for the heads up! I’ll keep that in mind next time I wrap a header.

[@norcalsbiggest2231]

What’s the link to that pipe?

[@MikesMiniMotors]

The header is the trumpet header from GoPowerSports.com www.gopowersports.com/header-pipe-trumpet-196cc-212cc-225cc/ The muffler and kit link are in the description of the video, if you need those as well.

[@brandoncowden8268]

Should powder coat that muffler like you did for the license plate mounts you made in a prior video.

[@MikesMiniMotors]

I had thought about it, but since it was going to get covered in the header wrap, I was fine with just painting it. Plus, I didn't want to wait as long... haha😆

[@mikejueden157]

Oil the clutch bushing. It will fix that.

[@MikesMiniMotors]

Thank you for the input! I realized after making this video, that I was just being dumb and didn't think about that. I have since oiled it and it is working good again. I appreciate the comment!

[@NubsWithGuns]

@@MikesMiniMotorsReplace it, it's cooke. ROFL

[@AreEff1987]

What engine is that

[@MikesMiniMotors]

It is a Predator 212cc.

[@Carl_wheezer222]

Lube your clutch lmao

[@MikesMiniMotors]

Lol, I realized afterwards that I was just being an idiot and needed to do that... 😆

[@Carl_wheezer222]

@@MikesMiniMotors same thing happened to me dude. I started it up and my go kart launched!!! My clutch had gotten stuck when i turned it off. Dude lucky I had a hand on it🤣

[@MikesMiniMotors]

@@Carl_wheezer222 Oh, wow! That's crazy! Good thing you had a hand on it! I never had it go that crazy, just enough for it to go forward enough to tip over while idling.

[@airsoftgodfather]

So basically it doesn't do anything lmao

[@MikesMiniMotors]

It may be a bit harder to tell from the video, but it did quiet the engine down quite a bit. It is much easier to tell the difference in person.