MegaSquirt III Gen3 Hemi Plug & Play Gold Box - Electronic Fuel Injection Controller - EFI Source

CLICK THE LINK FOR MORE INFO:
www.efisource.c...
MS3 Gen3 Hemi Plug & Play Gold Box
$1,295.00
The EFI Source MS3 Gold Series plug and play ECU for Gen3 Hemi motors is the most complete and cost effective system available on the market today. The Gold Series comes complete with a plug and play harness and a factory installed base tune. Simply connect a power, ground, and switched 12v and you will be up and running! With the Gold Series plug and play system there is no need to waste your precious time terminating a mess of wires under your hood, we did all the work for you! With a price of $1295 the Gold Series plug and play blows other units away with value for your hard earned dollar as well as ease of install.
MegaSquirt MS3
Gen3 Hemi Gold Box Standard features
· Controllers are factory configured for your Gen3 Hemi engine
· Start up program factory installed
· USB, RS232 and CAN communication
· Onboard SD card for Data logging
· 8 High Impedance injector drivers
· 8 High current ignition outputs. No additional boxes or coil drivers needed.
· Fuel pump output
· Fan output
· Stepper and PWM Idle Air Control outputs
· 2 Nitrous outputs
· Variable Valve timing output
· 12 volt tach output
· Two Step Input
· 2 Oxygen sensor inputs
· 2 Knock sensor inputs
· Nitrous input
· Data Log switch
· Dual table switch
· 3 additional general purpose inputs (on/off or frequency)
· 1 additional analog input

[@EFIsource]

For questions or assistance feel free to contact EFI Source by phone or email! [e-mail] Tel: [phone] Fax: [phone]

[@nathan00campbell]

ok so lets say i go to the local bone yard, pull a running 5.7 or 6.1 hemi from a truck or car, all i would need is this gold box and harness to drop it in my project and be running

[@EFIsource]

Correct......as well as a cable operated throttle body such as a BBK 85mm. Give us a call if you would like to get into specifics 610-473-2089

[@stuntout100]

So would i need another ignition control box or does this ms3 cover ignition as well...if it doest could i just use a msd soft touch box for ignition and the ms3 for fuel control? Help much appreciated...

[@fourfortyroadrunner]

C'MON man instead of bullshit music and a bullshit sales pitch, how about some actual "FACTS" about this system, what is required, what it does, capabilities, and extra hardware / sensors required.