MEIKE Drop-In Variable ND Filter Review for RF-Mount Cameras

[@FulaanCreative]

Meike ND Filter amzn.to/35GeqRM EF to RF Speed Booster amzn.to/3FwSlRm My custom LUTs & Presets here: fulaancreative.com/shop MY CAMERAS: Canon EOS-R amzn.to/3jOHCbx Canon EOS R10 amzn.to/3Q6ISGC Canon M50 amzn.to/2QRsxvS PREMIUM VIDEO/PHOTO EDITING LAPTOP: Mac amzn.to/45xlCd6 PC amzn.to/45wqMGi SOFTWARE I RECOMMEND: Want Awesome Photo Edits? Try Luminar Neo! l.skylum.com/luminar-neo-fulaan (10% off coupon code: "fulaan10") Need help with KZbin? Check Out TubeBuddy! www.tubebuddy.com/FulaanCreative RECOMMENDED GEAR FOR STUDIO SETUP: Canon EOS-R amzn.to/3jOHCbx Canon RF 15-35 lens amzn.to/39yItbA Apature 120D Mark ii Light amzn.to/3jRUlKK Apature light dome ii softbox amzn.to/3jN5bS6 Rode video mic pro amzn.to/3h03Nct Manfrotto Tripod & Fluid Head amzn.to/2X6aWAv SanDisk SD Card amzn.to/2AZASGa Sure SM7B Voice Over & Podcast Studio MIC amzn.to/3rsxDMW Variable ND Filter amzn.to/35aI8vc Water Proof Gear Bag amzn.to/3rvhOnz MUST HAVE ACCESSORIES FOR EOS R, RP, R6 & R6 Use EF & EF-s lenses on your EOS R amzn.to/3dffbRK Built in ND Filter Drop-in Adapter amzn.to/39pVh5p Remove the crop in 4k with this speed booster amzn.to/3foNdFN Water proof gear bag amzn.to/3rvhOnz MY FAVORITE LENSES THAT CAN BE ADAPTED FOR M50 AS WELL AS FULL FRAME CAMERAS Sigma 18-35mm f1.8 amzn.to/3fyn8kL Canon 55-250 stm telephoto with IS amzn.to/348O4o7 Wide Lens For Vlogging - Canon 10-18 stm amzn.to/3lYvTrb EF-M to EF& EF-S adapter amzn.to/303Upiu MUST HAVE ACCESSORIES FOR M50 & OTHER CANON APS-C CAMERAS: Make your m50 more like full frame w/ this speed booster amzn.to/3cAte5i Use EF & EF-s lenses with your M50 amzn.to/3fDzOtJ Small Rig Cage w/ Top handle amzn.to/2O4sBau Water proof gear bag amzn.to/3rvhOnz MY FAVORITE BUDGET LIGHTING GEAR: Amaran 100D amzn.to/3wbpPkH Aputure Lightdome II softbox amzn.to/3gpljrR Neewer softbox amzn.to/3aEjM05 Godox SL-60W amzn.to/3zhMHB1 Godox 120 cm softbox amzn.to/3iwFbw2 Yongnuow LED light amzn.to/2TPj7lT Light Umbrella amzn.to/3is8Vdl Neewer softbox amzn.to/3aEjM05 RECOMMENDED GEAR FOR BUDGET STUDIO SETUP: Canon M50 Mark II amzn.to/31xjZw8 Original m50 amzn.to/2Hppy90 Canon 10-18 Wide Angle amzn.to/31o0g2r Canon 55-250 Telephoto amzn.to/35jau59 Amaran 100D amzn.to/3wbpPkH Neewer softbox amzn.to/3aEjM05 EF-M to EF& EF-S adapter amzn.to/303Upiu SanDisk SD Card amzn.to/2AZASGa Takstar Shotgun Mic amzn.to/3fP5jjX Tascam DR-10L Audio Recorder amzn.to/31sRVtQ Benro Tripod amzn.to/30XBi8O Manfrotto Fluid Head amzn.to/3hJ5Zp5 Podcast MIC - Blue Yeti USB Mic amzn.to/2P5ji7e Voice Over Studio MIC (samson CU90 Pro) amzn.to/3u69KeG Variable ND Filter amzn.to/36jXzk3 Water Proof Gear Bag amzn.to/3rvhOnz BEST HYBRID MIRROR-LESS CAMERA CURRENTLY AVAILABLE: amzn.to/2Tae2RP As an Amazon Associate I earn from qualifying purchases. The links above earn commission.

[@DormanDiaries]

Every day is a school day. Didn’t know these even existed. On a side note, must be a boxer with them head movements! BOOM Another quality vid.

[@FulaanCreative]

Man you got a good eye! I taught boxing and MMA for about 10 years before getting into videography. Thanks for watching and commenting.

[@DormanDiaries]

@@FulaanCreative I knew it! You can just tell!

[@EmeraldAudiovisual]

And the filters are interchangable. So you can stick the Meike VND into the Canon filter adapter and get the best of both worlds :)

[@FulaanCreative]

Thanks for the info! I didn't know that.

[@rvairocker]

Are you sure Cannon drop in filters works on meike adapter .. ? Thank you

[@EmeraldAudiovisual]

@@rvairocker Yes. I have both. Breakthrough and Kolari also use the same filter type. All interchangable.

[@milosschaffner9162]

1:55 best landscape shoot I ever saw in a video! 🤣 Love your style. Direct abo 💪👌😍

[@FulaanCreative]

Thanks for watching and commenting Milos!

[@mvp_kryptonite]

I finally pulled the trigger on this. No colour shift, clear filter included and low price made it an easy choice. Just waiting for it to arrive

[@FulaanCreative]

Yeah it's a no brainer. Amazing product.

[@deviate.2651]

Meike also has a locking version of this same adapter. It’s fantastic. i highly recommend to anyone shooting with photo lenses because the lock stops the mount from wiggling.

[@FulaanCreative]

Thanks for sharing : )

[@AIdrisPalmer]

As always, another awesome video. Meike is a great company and you're right, the price point and features sell the product.

[@FulaanCreative]

Thanks for watching and commenting Idris! This is my first encounter with Meike but I agree they look solid so far.

[@malo_840]

OMG I was not aware of this existing lol thank you so much this is an instant buy for me. I love the fact that there is a clear dropping ND filter for the moment I do not need it. Thank you so much brother this was awesome

[@FulaanCreative]

Glad I could help Malo_. Welcome to the channel!

[@alanboscardin5139]

Hello, I would like to know if with the adapter the ND filter is detachable to be able to use it with other filters intended for astro photography. Thank you

[@FulaanCreative]

The ND part slides out and can be replaced with any other meike filter designed for that system. If you mean can you stack this adapter with other adapters then no I don't believe you can

[@SanMiguelBulls]

Thanks for clarification of clear filters

[@FulaanCreative]

Glad it was helpful.

[@therealipodcast]

I appreciate you bro. You seem like a humble guy. Much success on your future content 🙏

[@FulaanCreative]

Thanks man! I appreciate the love.

[@juliemullings6343]

Much appreciated. I'm just looking into buying a Canon mirrorless camera to convert to infrared and with EF and EF-S lenses this Meike looks like the adaptor for me.

[@FulaanCreative]

Glad the it was helpful : )

[@WondersofGuyana]

So what if you take out the glass from the clear filter, would it affect anything

[@FulaanCreative]

What do you mean? If you mean shooting without it, I think you could do it but you would have a wide open slot where dust could get on the sensor. Not sure why you'd want to do that.

[@jakemadonia]

So I put this on my r10 and I can use ef and ef-s lenses like on my canon 80d

[@FulaanCreative]

Yes exactly

[@catrionamacinnes2048]

Ah but you obvs can’t use the filter adapter and the speed booster. I guess that’s just a choice depending on the shoot?

[@FulaanCreative]

Yes exactly

[@KBIBEATS]

Which mic is he using on the camera in the video?

[@FulaanCreative]

This one. kzbin.info/www/bejne/Y3y2nKifbs2bf6c

[@KBIBEATS]

@@FulaanCreative thanks man

[@KBIBEATS]

@@FulaanCreative can i use it for my canon eos M50 tho?

[@FulaanCreative]

@@KBIBEATS yes. For sure

[@paulomateus3083]

Nice review! Just a correction the Meike is weather sealed unless your copy isn't.

[@FulaanCreative]

Gotchya. I didn't realize that when I made the video, thanks. Even more reason not to get the Canon version and grab the Meike instead.

[@rvairocker]

Hii.. really wanted to know an important question does Cannon drop in filters works on meike adapter .. ? Thank you in advance

[@FulaanCreative]

If I remember correctly Meike claims that they do. I would check with Meike first though if that's important to you.

[@rvairocker]

@Fulaan Creative yes it is .. I have asked meike but didn't get a reply

[@gaboguerra950]

Thanks for sharing What is the range of stops ??

[@FulaanCreative]

I believe it is 1.5 - 9 stops.

[@gaboguerra950]

@@FulaanCreative 👍🏻👍🏻👍🏻🍻

[@Officialjordanberg]

Does this adapter still use RF lenses? Or can you only use EF lenses once the adapter is on?

[@FulaanCreative]

Only EF & EF-S Lenses

[@getalper]

Is there any possibility to have this for my R50 and still use RF lenses? I was thinking, if the EF mount on the adapter can be replaced with yet another RF mount.

[@FulaanCreative]

Unfortunately it only works with EF & EF-S Lenses.

[@mysty0]

Help me out here.. why cant I just get a built in ND Filter to use with my EF-M Lenses that isnt a damn Adapter? Just EF-M to EF-M please? Massive opening in the market, all these built ins are Adapater. Huge oversight by Manufacturers

[@FulaanCreative]

Lol. I know what you mean. The reason is actually simple. It's not possible natively because it's a mirrorless camera with lenses designed for mirrorless cameras. The EF lenses are lenses designed for DSLR cameras not mirrorless and because of that there is extra flange space between the mount and the Lens so there is space for a filter. With native mirrorless lenses like EF-m or RF there is no physical space for a filter. This results in the possiblity of smaller cameras and lenses which is one of the appeals of mirrorless systems. So yeah that's why there isn't any non adapter filters of this type..

[@mysty0]

@@FulaanCreative I want to argue with you and tell you youre wrong but I'm just going to shutup lol..

[@regiiischa]

does this fit to my canon eos r50? because i just bought it, but it doesn't fit.n Do you know an option i can buy for my camera?

[@FulaanCreative]

Yes it should fit just fine. Make sure you bought the EFT-R not the EFT-M. Also you can only use EF and EF-s lenses with it.

[@regiiischa]

@@FulaanCreative okay thank you

[@draddy2444]

how does it works with photography ? in my case with ef lenses + nd filter . i do not get proper focus on subject

[@FulaanCreative]

There should be no problem with photos as well but to be honest I have only used it for video so far. I will check and get back to you later.

[@draddy2444]

@@FulaanCreative thats so nice of you , will wait for your update .

[@louisoosthuizen5498]

Im confused if I use this adapter do I need to use an EF lens? I have a canon R50 and I have an RF 1.8 50mm lens. Will this adapter work with the RF lens I have? if not what do I need to do in order to use drop in filters

[@FulaanCreative]

yes it's only for EF an d EF-s lenses. For RF lenses you'll need screw on filters

[@louisoosthuizen5498]

@@FulaanCreative do you have affiliate links for these

[@Bo_Hazem]

I wanna get the EF to E-mount variant, but wanna ask: Does the EF mount have any play or it's solid when locked?

[@FulaanCreative]

In the Ef-Rf version it's really solid. I never used the e-mount one so can't really say.

[@Bo_Hazem]

@@FulaanCreative The E-mount lock is pretty solid so that's a great news to know! I was thinking of PL to E-mount but seems to have some play and not as clicky as the EF nor E mount. The PL mount might be overrated or something wrong with that adapter. Thanks a lot for the feedback!

[@ALLBOUTTHUGLIFE]

As soon as one compatible to the M50 comes out, pls do a review 😝 I want one. Great Video, Twin 💪😎

[@FulaanCreative]

Haha! Thanks man! Will do.

[@ALLBOUTTHUGLIFE]

I'm more on the budget lower end 😝

[@FulaanCreative]

Don't worry. Your not the only one!

[@HunterSenftner]

Why do they have Glass in the Clear? Why don't they just use a blank frame to put a slug into the opening and plug it from light coming in? Seems like not needed to have any glass in there at all that could cause any reflections or dust, etc.

[@FulaanCreative]

I agree, I don't know why they did it like that. I heard that if the clear isn't in there it will have a hard time focusing so I tested it to see and for me it focused fine so not sure what's the point of the clear.

[@mikerichardson3229]

great video, but my question is if i use this filter, do i can i still use the lenses i have or do i need to buy new lenses ?? rf to ef ?? i'm new to the photography world

[@FulaanCreative]

The filter is on for EF and EF-S lenses. Won't work with RF or RF-S lenses unfortunately

[@taidghrichards4329]

Does the clear filter reduce the amount of light entering the lens at all?

[@FulaanCreative]

Nope

[@nicoqnus]

Is there a way to use a speedbooster as well as a drop-in vnd ? I have. A Canon M50. Thx

[@FulaanCreative]

Not as of yet. Meike just released their Drop in VND for the m50 but if they ever release a VND speed booster mix then it would be possible.

[@nicoqnus]

@@FulaanCreative ok thank you for the update. I have been looking around the internet but I didn't find anything close to a vnd speed booster. Have you heard/seen something similar from other brands ?

[@FulaanCreative]

Not as of yet but it would be an amazing product so I hope someone will make it sooner or later.

[@scottrc85]

Does this speedboost as well?

[@FulaanCreative]

Nope. Hopefully they make that though. That would be awesome.

[@georgiahomegrownadventures]

Did you use this on your R10 - it won't fit mine.

[@FulaanCreative]

Yes Iv'e used it many times. Make sure you have the Meike EFT-R not the EFT-M. The EFT-M is for m-mount cameras like the m50.

[@georgiahomegrownadventures]

@@FulaanCreative Thanks so much for the quick response. I figured it out - I have the EFTR but my lenses are RF so it's a no go for me. So disappointed! Hopefully they'll make one to fit RF lenses. Thanks again!

[@bboyswoosh87]

Awesome review man thank you so much! Straight to the point.

[@FulaanCreative]

Thanks! I appreciate the kind words.

[@Naku-SomewhereYouAreNot]

I've never heard you mention losing an f stop with the Meike adapter. But you did mention you covered a speed booster in the video link at the end. Followed the link but it wasn't a speedbooster in that one either. The variable ND filter version is in that video. This is a sudden issue for me. I bought the Meike adapter (w/o the var ND filter) to use my R10 with a telescope. I just had a Sigma 17-50mm f2.8 delivered. But with my adapter, I'm only getting f3.5. Probably safe to assume it's due to not using a speedbooster?

[@FulaanCreative]

I'm not sure I understand your question. The ND filter adapter should not have any effect whatsoever on your aperture. If it's a 3.5 lens it should give you 3.5 fstop. Seems like the adapter might be malfunctioning.

[@Naku-SomewhereYouAreNot]

@@FulaanCreative Thank you so much for taking the time to address my question. I've got the Meike ef/rf adapter without the ND filter. Using it, my Sigma f2.8 lens only opens to f3.5. I assume since the adapter moves the lens away from the sensor it causes a loss of about an fstop and that's what the speedbooster fixes. But you're saying, I shouldn't be losing an fstop using the adapter. I'm going to order the Meike with the variable ND filter and give it a shot. Thanks again for taking time out to help! Your videos have already been immensely helpful and to get personal attention is over the top!

[@FulaanCreative]

@@Naku-SomewhereYouAreNot No prob. Thanks for watching and commenting. Regarding your adapter, it still sounds like 1 of 2 things. Either the lens or adapter is malfunctioning or the camera is showing you f3.5 on the screen but it's really f2.8 and the communication is just bad between the lens and adapter for some reason. The distance you mentioned has no bearing on the fstop. I have a bunch of plain ef/rf adapters and none of them have an issue like that.

[@Naku-SomewhereYouAreNot]

@@FulaanCreative Immediately after posting my last comment I pulled the lens out and connected it again. The R10 showed f3.5 and when I rolled the aperture dial it went right down to f2.8. I don't know why it wouldn't move before but I know it didn't. I think we can both safely assume it was some kind of cockpit error. Short story, it has healed. I'm sorry for wasting your time. But not sorry to learn you ain't no diva and what at a cool dude you really are! You usually don't hear jack from popular creators. Being able to bounce this off someone else was huge! Thanks a million!

[@Pedrohramirez]

good stuff, thanks. I could not find this or similar product for canon ef/efs mount cameras

[@FulaanCreative]

Thanks Pedro. Unfortunately currently only for RF mount.

[@fuego604]

So they make one for Sony ?

[@FulaanCreative]

I haven't seen it yet but I sure hope they make one soon.

[@dejanojames5687]

does this work for the Canon R8 ?

[@FulaanCreative]

Yes, for sure

[@dejanojames5687]

Thank you man! @@FulaanCreative

[@dejanojames5687]

@@FulaanCreative used it about a week ago, and i definitely recommend! shot a wedding with it and the daytime photos were great! forgot that i had to adjust it in the night, but when i did, while using the AD600, the photos came out great straight from camera.

[@fredfalcon1347]

hello im a new be.... can you tell me what is the difference between the one you mention and the Meike MK-EFTR-CL Auto-Focus Locking Drop-in Filter Mount Lens Adapter ... on amazon , its about $30 more ... is there a useful .. difference ? please

[@FulaanCreative]

If I'm not mistaken the one you reference has a locking mechanism for heavier lenses but other than that not much difference

[@fredfalcon1347]

@@FulaanCreative thank you for your experience... im a newbee' I ordered the unlocked one, and a Canon r6mark 2 , and on my way to lean how to be a video/ musician / artist... so much to learn... I watch your videos, so much to learn...

[@richryanphotography]

Just to be clear.... This adapter is for EF lenses to be able to mount on R camera bodies... it is not compatible with straight RF mount lenses, correct?????

[@FulaanCreative]

yes

[@richryanphotography]

@@FulaanCreative Thanks for the response... Love your channel!!

[@FulaanCreative]

Thanks Rich!

[@phill5917]

Thanks bro you saved me hundreds. I also find it ridiculous that Canon is charging 400$ for the complete set and a little over 200 for a drop in filter... I love canon but they are repeated offenders when it comes to over pricing their products. UPDATE: After picking up this adapter and doing some test in lightroom I noticed that the filters do affect sharpness in your images so keep that in mind.

[@FulaanCreative]

Glad I could help. Canon is great but they aren't looking out for their supporters in many cases unfortunately.

[@ST-fl5fy]

Was there any issues with the Meike adapter like slower eye focus from distance or otherwise? Did it become loose? Seems to good to be true. For portraits this is great. Curious does the Meike ND for in the canon version? Thanks

[@FulaanCreative]

Honestly I don't have any negative experiences with it at all. It's an Amazing accessory...

[@albas4923]

I have a question, is the product strong enough to be used with a big heavy lens (like the sigma 150-600) ? And does is have any micro movement or is it entirely locked ?

[@FulaanCreative]

It has an ever so slight give to it. Nothing really noticeable unless you twist it with your hands. I never used the lens you are referencing but I use it with no problems with my tamron 15-30 which is an extremely large and heavy lens. Check the dimensions and weight of the tamron compared to the lens you are referencing. That should give you an idea.

[@albas4923]

​@@FulaanCreative If it can handle 1100g i guess it can handle 1930g too, I just hope it is very sturdy, anyway thanks for your answer ! Honestly, even if it twist a little, it's still 450$ less than the canon lmaoo

[@juanantonio358]

Hey question here, I want to stick to my speedbooster. So which step up rings do you recommend?

[@FulaanCreative]

you mean using the speed booster and drop-in nd at the same time?

[@juanantonio358]

No drop-in nd filter. A separare ND filter and I dont know which step up rings to use. I would use the drop-in nd but I'd have to remove my speed booster, right?

[@FulaanCreative]

@@juanantonio358 oh i see. Yeah i don't think you could can use both at the same time. For step up rings personally i would just grab the cheapest ones off of Amazon. They should just fine.

[@juanantonio358]

@@FulaanCreative Alright, thanks!

[@theorncampbell4432]

Hey, thanks for putting the time and effort into making this video. Meike (mikey), is a great brand. I'd be really interested to see your style of review on one of their lenses on the EOS R. I wasn't sure if something would be amiss between the Canon and Meike drop in ring, but based on your review, I'd be a madman to buy the Canon one. I've got my eye on the Tamron 15-30mm 2.8. This filter ring and that lens combo would blow up my wide shots. Anyway, I smashed the like button. This is quality content. Where are you shooting this video. It looks mad equatorial outside. 🙂

[@FulaanCreative]

Thanks Theorn! Actualy I'm in Turkey. I did a review on the EOS R and pretty much all the outdoor footage was shot using the Meike drop in ND filter on the Tamron 15-30. It has Luts applied but I didn't have to color correct any of it due to any color shift from the ND so that video should give you an idea what to expect from the R and this ND filter. Here's the Link kzbin.info/www/bejne/pp27ZpahaqZsnNU

[@EmceeGraffiti]

Fire. I had been looking at Meike for a little for a drop in. But I’m still only rocking my M50. They don’t seem to have an EF to EF-M adapter. So far Commlite still the best looking option for me until I get a new camera body. As usual tho, solid video.

[@FulaanCreative]

Yeah commlite has the only ef-m ND i have seen so far. Thanks for watching and commenting.

[@RonPalacio]

Hi guys,,does anyone of you using a Canon R6 with Meike VND filter rf to ef, with Tamron 24-70mm 2.8 G2? I've been using the R6 for a while now with the Tamron 24-70 and now i got the Meike adaptor VND filter but is causing some issues. Sometimes the lens loses focus and starts making noises.. anyone having the same issue? I just updated the R6 to its latest firmware

[@FulaanCreative]

Hello. I haven't used it with the R6 but I remember someone saying to make sure to use the clear filter instead of just pulling out the ND and leaving the slot empty because it won't focus correctly without either the ND or clear filter in there.

[@RonPalacio]

@@FulaanCreative yuo that i know..my issue is when im using r6+meike+tamron combo the lens would start making noises and wont work until i turn everything off...

[@FulaanCreative]

Never seen that before. I wonder if it could be a faulty ND. Maybe you ask Meike to replace it.

[@kenjiyamamoto423]

tamron is sucks lenses,.

[@12triggaman12]

Great video as usual! Guys.. I was wondering, can you use the Mieke ND filter with RF lenses? Or is it only a viable ND filter if you plan to use EF lenses with an RF-mount camera? Thanks.

[@FulaanCreative]

Unfortunately only EF and EF-s.

[@12triggaman12]

@@FulaanCreative Thanks for the help my brother, I appreciate it 🙏🏽

[@paulelunico]

Nice review. I also bought the polarizer filter they sell for 70 bucks.

[@FulaanCreative]

Thanks! Yes I love this adapter.

[@IAmR1ch]

You said this does not have weather sealing, I believe it does. Look at the red rubber seal around the camera side of the filter. I believe that is weather sealing.

[@FulaanCreative]

Not sure if it is for weather sealing or just to make it look cool. I would check the specs with the manufacturer before buying if weather sealing is something you really need. Thanks for watching and commenting.

[@gigallthetime37]

Thanks for the 411. Would you recommend this on a SL3? Or should I just use a inexpensive ND filter for now till up grade my cam?

[@FulaanCreative]

Thanks for watching and commenting. I don't believe it would work on the sl3 as it is for RF mount cameras. Many of those cheap ND filters work well enough but the problem arises when you have a bunch of lenses with different thread sizes. In that case the drop in ND is more cost efficient as well as having other benefits.

[@gigallthetime37]

@@FulaanCreative alrighty then I'll try to find a drop in ND filter for my cam. Thanks again bro

[@tonysluna]

I always enjoy your videos... so.. I Clicked "Full Bell" lol

[@FulaanCreative]

Thanks Tony!

[@marcdewit4729]

Thanks man, great review, very helpfull !

[@FulaanCreative]

Thanks for watching!

[@FulaanCreative]

What's up guys? If you liked this video you can also check out this playlist for more content kzbin.info/www/bejne/q6u0foWsgaeClas

[@joaovtaveira]

But Meike adapter has weather sealing.

[@FulaanCreative]

Yes I believe you are right but I didn't know at the time.

[@kellmarktv]

I think I'm gonna get it 😎💯👌🏻

[@imzaazmi]

Thanks..got this Great adeptor 👍👍❤️

[@FulaanCreative]

You are welcome

[@KeyportFilm]

Cool stuff

[@FulaanCreative]

Thanks!

[@DavidKabra]

I use this on my R6 and it's a dream, don't have to buy individual filters for ef lens anymore 😌

[@FulaanCreative]

Yeah awesome product for sure. Can't wait to get some more stuff from Meike to test out.

[@RonPalacio]

Do you have 3rd party lenses as well? Like tamron or sigma? Are they working properly with meike? Cuz i just got the meike and im using r6+tamron and the tamron 24-70 is having some issues like stop working and starts making noises

[@DavidKabra]

@@RonPalacio I'm using the same lens. I normally troubleshoot this way. Double check if censors are clean both adapter and lens. When you put the adapter back on make sure it clicks + same procedure with lens. Sometimes the image stabilization is funky on the 20-70 so turn it off before powering the camera

[@RonPalacio]

@@DavidKabra are u using the same tamron 24-70 2.8 g2 with r6?ummmhhh im gonna try that cuz i really like the Meike and its a shame if i need to return it

[@DavidKabra]

@@RonPalacio yeah my bad, I run the 24-70 G2

[@39Dimirao]

Obrigado pelo vídeo, estava meio que na dúvida, mas depois do seu vídeo resolvi comprar.

[@FulaanCreative]

Gracias por ver y comentar

[@lb7144]

Boom, boom, boom, ordered one for a 90D.

[@lb7144]

Boom, liked and subscribed 😂

[@FulaanCreative]

@@lb7144 Thanks. Welcome aboard!

[@THSimagery]

thanks bro

[@FulaanCreative]

You are welcome Herman.

[@bukannamasebenar8175]

Boom... boom booom

[@ladanaz7643]

👍👍