Antique C-Clamp Vise Restoration - Vise Restoration Videos

#restoration #restorationvideos #antiquerestoration
Antique C-Clamp Vise Restoratin - Vice Restoration Video.
Hello Again To Everyone. In This Project, I Restore British Made C-Clamp. After Cleaning With Water, I Decided To Clean Rust With Rust Remover. Then I Realised That This C-Clamp Is Forged Steel. I'm Grateful That This Is Forged Steel, Because Nearly All Of The C Clamps Manufactured Today Are Cast Iron. Cast Iron Is Easy To Work With, But It's Dangerous To Work With , It Is Unsafe. When The Shaft Hole Size In The Body Was 7/16(Whitworth), I Enlarged It And Repaıred It With M12(Iso). The Working Handle Of This Product Was Shaking Because It Has Been Used For Very Long Time And Was Broken. Also It Was Short Than Normal. For That, I Left The Handle, The Iconic Part Of This Arm, With It’s Original, And I Made The Shaft Again And Gathered It Together. The Cylinder Part At The End Of The Shaft Was Fixed By Hammer. I Made Thıs Stabilization By Using A Cut Ring Instead Of Hammering. After Leveling The Differences In The Inside Of The Cylinder, I Blacked With Cold Bluing. But I Let The Outer Keep Bright. Fınally, After I Decided To Paintıng The Product Black, I Decided To Make A Meine Mechaniker Label In Brass, Due To The There Was No Logo Or Writing On The Product. I Made This Label Wıth A Small And Laser To Be Aesthetic. Brass Label Copper Rivet Was A Great Combination. I Hope You Like It. If You Liked It, I Can't Wait To See Your Likes And Comments. See You At The Next Project. Stay Healthy.
Meine Mechaniker
0:00 Giriş
0:20 instagram: @meinemechaniker
2:51 loose, short and trapezoid
3:02 let's start with the main body
3:09 sandblasting machine
3:33 forged steel
3:54 tig welding
4:47 polyester putty
5:42 water
5:47 600 grit sandpaper
5:55 ral 9005
6:19 the second track
6:35 that's how I planned the changes
9:04 hight strength
9:17 the third track, but not the last track!
10:32 making labels with a laser
12:41 perfect restoration
14:05 thank you for watching

[@niamhmcp7548]

my toxic trait is believing that if i had the right equipment i could do this too because i’ve watched so many of these videos now

[@vicentesanchez8949]

WOW, The outcome was better than the original!

[@Marcelo-56]

This is a true luxury restoration👍👍

[@sashakraus671]

I cry every time you put your mark on otherwise immaculate restorations.

[@Per-Olovkindgren]

Dear gentleman. I was here! "perfect restoration". You bet! 🙂Vielen Dank! Even the 'simplest' tool is complicated to make and restore. You did it! Peace on Earth! Per-Olov

[@meinemechaniker]

I'm glad you're here, dear gentleman. There is no such thing as easy, There are just habits. I think, I'm used to what I do. 😊 peace at home, peace in the world. 🌿🌿🌿

[@byOldHand]

My dear friend this is simply perfect. you did everything that had to be done. It is very successful that you make a project plan and think about every detail. Besides all that, I was also happy to see the brass label and copper pins, very beautiful 🤗👏🏻👏🏻👏🏻 Thank you for sharing... Cheers Gentleman 🥃

[@meinemechaniker]

cheers gentleman, friend. I'm glad you're here and you liked the video. it's your turn, friend, it's your scene. 🥃🥃

[@spiderreed350]

I'm not sure if you can legally pit your label on something that you didn't make from scratch. You just overhauled it,beautiful job I might add.but you know how patents work I'm sure. There's lots of grey areas.

[@meinemechaniker]

@@spiderreed350 😀👌

[@friedrichwilhelmvonsteuben7952]

Always good!

[@Abed.alnaser.Alrefai]

Very very good work ❤️ ❤️ ❤️

[@tomrailton9201]

Brilliant video thanks very much. Tom.

[@meinemechaniker]

Thanks Tom

[@billyfoster3223]

Brilliant resto work! Beautiful piece! Cheers!😀🛠️🔧

[@meinemechaniker]

Thanks billy

[@danielcarvalho8865]

Just simple and beautiful

[@jimmyroberts4333]

Absolutely, Totally, beautiful restoration..

[@meinemechaniker]

🙏

[@re-fix9678]

very nice👍👍👍

[@meinemechaniker]

👍

[@davidjohnston330]

FANTASTIC 🤙🤙🤙

[@dreadfultwerp]

I appreciate the level of work you put into your restorations. So many of the other videos do nothing but take it apart, clean it, paint and reassemble it and call it restoration. You create beauty.

[@starjazzasbani8489]

Beautiful Work!

[@svipace8220]

Excellent restoration and reconstruction! I'm glad to see you did the turning pin to correct size. Thank you for your effort.

[@Ishimazure]

Thats what i call satisfaction.

[@hairyfro]

This clamp seems like it must have had a specific purpose. Any idea where it came from?

[@bunyoderkabayev3476]

Salom juda zör ajoyib mahorat 👍👍👍👍 ÖZBEKISTON.

[@meinemechaniker]

Salom Bunyod 🙏🏻

[@Hadidkb]

YOU AWESOME BRO 👏🏻👏🏻👏🏻❤❤

[@lolhesbeingstabbed]

What a fantastic way to extend the thread. Really impressed by that.

[@suhayl5157]

excellent work as usual.

[@alanpreston3111]

Beautiful piece of work 😮👏🏻👏🏻👏🏻👏🏻👏🏻

[@meinemechaniker]

🙏🏻

[@rlm98253]

Well done, sir.

[@churlepatakha]

Loved it dear!

[@TayfunBilge]

Yöntem, detay, sonuç. Harika, eline sağlık.

[@jaguar2587]

Ещё раз посмотрю...приятное видео

[@DeanG55]

Greetings from Napa Valley, CA, USA!! Love your videos. Please keep them coming!! Thanks for saving another tired tool from the scrappers!!

[@meinemechaniker]

thank you so much mr. grein grettings to napa valley

[@benalter7316]

beter than ever, well done

[@RestorationAustralia]

Very posh, well done.

[@edka1031]

Magnifique! Museum piece!

[@Yorumcu63]

This is not restoration .This is new model 😄Congrulations

[@meinemechaniker]

🙏🏻🍀

[@Kyle900t]

Another great resto. Very nice.

[@meinemechaniker]

❤

[@micheleondeck5373]

Very good work

[@jimmyolano929]

*Wonderful!*

[@meinemechaniker]

🙏🍀

[@ArtisticEndeavors]

Love your details! ✌🏻🎨☕️

[@meinemechaniker]

thank you 🙏🌿

[@kiiiisu]

sweeet looking good! and thanks to ur country for Bayraktar!!!

[@meinemechaniker]

thanks, your well come 🙏

[@user-bj5yb4zz3s]

갈수록 세밀해지고 완벽해지네요^^ 영상미도 더 좋아지구요 멀리서 응원합니다

[@meinemechaniker]

🙏🏻

[@IrishLion-re8bu]

PERFECTION.

[@meinemechaniker]

🙏🏻🍀

[@kahutochishisumi9056]

An unbelievably beautiful transformation

[@michaelgraham3572]

Way better than new!

[@meinemechaniker]

🙏🏻🍀

[@kissdamonk]

proud to see that you are using Turkish chemicals 👏

[@meinemechaniker]

World is small 👌

[@evilsquirrel56231]

Great stuff!

[@LinsRenato]

very, very good

[@DrMrSmooth]

Good restore and work 💪

[@meinemechaniker]

Thanks mate 🙏🏻🍀

[@ForgottenShineRestoration]

Wow! Very nice restoration! I especially loved the scene with the fiber laser 🤩 best regards 🐢

[@meinemechaniker]

thank you, my friend, it's good to see you here. I'm glad you like. cheers, mate 🥃🥃

[@ForgottenShineRestoration]

@@meinemechaniker 🤗🐢🍻

[@toniatalley1977]

Gorgeous!!!

[@meinemechaniker]

🌞

[@BABA1461]

Nice, SÜPERFORMANCE. 👍🏽👍🏽

[@meinemechaniker]

Thank ts ⚽️

[@derbearbubu]

perfekt Work 👍👍👍👍

[@erensusam]

good job..

[@OORAH659]

Forged Steel C cramps do they make anymore? you maybe should have hammer cylinder, but it is nice. Now I would like to see you using it in the background... Thanks for sharing ... OORAH!! 🍺

[@meinemechaniker]

🙏🏻

[@wokohedgehogs]

Who could have thought that a clamp could be so beautiful? Absolutely perfect. It’s nice to see a restoration video of something that genuinely is in a poor condition, there are so many items that look like thy have been sandblasted and left to rust to make them look bad. It would be difficult to make something look like this did at the start. Thank you for your efforts 😊.

[@meinemechaniker]

Thank you so much 🙏🏻🍀

[@SandpiperN121PP]

Such a simple but yet beautiful restoration. I love it!

[@Argumedies]

Fabulous!

[@meinemechaniker]

🙏

[@ahmedrashed5417]

This is the most incredible restoration channel after "my mechanics"

[@meinemechaniker]

🙏🍀

[@lindawallace6750]

C O O L !!

[@meinemechaniker]

🙏

[@georgemckenzie6552]

Once again a wonderful job. I love watching you turn a wore out and discarded tool to into a work of art.

[@meinemechaniker]

thanks

[@justinwilsoncustoms6520]

Top job my friend !!

[@meinemechaniker]

thanks mate

[@bigmike2149]

Machinists - Making things perfect, one turn at a time. 👍🏻

[@scroungasworkshop4663]

I see a lot of other KZbinrs trying to copy your style but none really succeed. You’re a trend setter😂😂😂. Cheers Stuart 🇦🇺

[@meinemechaniker]

Thank you mate 🙏🏻

[@dariusjanulis4119]

Wonderful👍👍👍

[@dave3156]

Another beautiful job!!! These are a joy to watch!!!

[@ahmedrashed5417]

Very very very very perfect

[@meinemechaniker]

thanks

[@jamesalsup9135]

Excellent!

[@meinemechaniker]

🙏

[@edwardaldrich7213]

Always amazed at the thought and detail in these restorations! Great job!

[@jl3390]

Okay, major points for mixing the paint can on the lathe! Oh, and nice restoration too. ;-)

[@brethenia]

Looks to good to use now! Personal I always buy my clamps in pairs. Now yo need a second on or make on to match.

[@ogenmiller]

Таким инструментом будет стыдно сделать плохое изделие! Прекрасная работа. Спасибо за видео. 👍

[@xxx69roband]

Perfect,simply perfect. But i have one request,please when you weld put on a filter for our eyes! Thanks!

[@meinemechaniker]

thank you. Do you have any technical knowledge about it? I will be glad if you help.

[@xxx69roband]

@@meinemechaniker i think you can apply a digital filter on camera,a colored filter.

[@jerryjohnsonii4181]

Spectacular restoration !!!!!!!!!!!!!!

[@meinemechaniker]

thanks

[@cathybenson5119]

Nice, very nice. 👍👍🇦🇺🇦🇺

[@meinemechaniker]

Thanks

[@richardruiz3654]

Outstanding as always, Sir!

[@KinG_KJ]

I thought what could be there to restoring such a small tool. But you're simply amazing man. You took it to next level restoration. Fabulous job. 👍

[@onmolder]

Süper, güle güle kullanın. Elinize sağlık.

[@meinemechaniker]

🙏

[@prasadvn524]

Beautiful job.

[@meinemechaniker]

🙏🏻

[@mikakoukkari2731]

Great job 👍🏻

[@meinemechaniker]

thanks

[@terrynicholls2975]

That’s a fine job, sir.

[@habiposmanbeskardes3113]

Eline sağlık. Pas sökücüden anladım. Güzel işcilik olmuş. Tebrikler

[@meinemechaniker]

Teşekkürler 🙏🏻

[@paulorth2251]

Wonderful workmanship on this clamp. The workers of the time this was used really wanted to hang onto their work. Thanks for sharing. 👍😁🇨🇱🇺🇸

[@meinemechaniker]

Thanks a lot 🙏🏻🍀

[@brycecrousore1985]

Gorgeous! A peaceful hello from Minnesota, USA.

[@meinemechaniker]

greattings to minnesota ✋

[@RestorationVS]

Good Restoration 👍🏼🤝

[@meinemechaniker]

Thaks

[@harrygatto]

Nice job. It's been a long time since I saw anything with a Whitworth thread.

[@meinemechaniker]

thanks 😊

[@habiposmanbeskardes3113]

Güzel oldu. Sadece videonun sonunda ekrana perfect resteration yazmasaydında. Onun yerine izleyen insanlar bunu söyleseydi daha güzel olurdu. Alçak gönüllülük te bunu gerektirir. Saygılar

[@predator4151]

Good job, thanks for video.. its not forged steel (maybe like that), its hardened steel.

[@meinemechaniker]

but there were traces of forged. The hole was not symmetrical. I can list many phrases.

[@predator4151]

@@meinemechaniker sure it can be forget steel. u wrote ^^forget steel^^ when did u knock it and we are listening ^^ching^^ sound.. that sound show we that steel is hardened.. what ever this is easy detail.. its looking amazing, i love it.

[@johnconnor555]

That's it !!! Just amazing,as you said,perfect restoration !!! 👍👍👍❤❤❤🙏🙏🙏

[@meinemechaniker]

🙏🏻thanks

[@lordzid667]

that was an amazing job. congratulations

[@antikaplanet2970]

Kardeşim supersin bizim topraklardan olmanızdan gurur duyuyorum tebrikler

[@meinemechaniker]

🙏

[@bryanbeatty8600]

A rusted chunk of metal goes in one end,a work of art comes out the other. Amazing. : )

[@meinemechaniker]

Thank you 🙏🏻

[@bryanbeatty8600]

@@meinemechaniker You are welcome sir.

[@robertsnyder6982]

As always, perfection!

[@meinemechaniker]

thank you mr. snyder

[@user-he7py9wt8g]

Здравствуйте, Автор. Канал моя механика, где нарисованы ключ и отвёртка случайно не ваш??? ) Очень качественно работаете, очень нравится смотреть.

[@kori_snw]

Good work, as always! And now I know how to test my old c-clamps for metal type. Thank you!

[@meinemechaniker]

🙏

[@lightning4871]

Damn! You do good work.

[@shedmanx3640]

Simply stunning. Perfection in every detail.

[@meinemechaniker]

thank you so much mate

[@frankierzucekjr]

Great work. That paint job looked flawless. Might want to eventually powder coat it tho.

[@meinemechaniker]

I'm thinking of using powder coating. thanks.

[@frankierzucekjr]

@@meinemechaniker hey no problem. You do some phenomenal work

[@garyjones2582]

M.M. That came out beautiful.. That was a nice trick, threading one rod into the other.. I would have never thought of that.. Take care my friend and God Bless...

[@meinemechaniker]

thank you so much mate

[@terrystover7365]

What a beautiful end result! You are really good at restoration. Your eye for detail is the best.

[@meinemechaniker]

Thank you so much 🙏🏻

[@yaj3075]

Very good job, very nice😍👍

[@meinemechaniker]

🙏🏻thank you

[@GrommiD]

So long waited video and et voila, belissimo. I can see that you have bought some new powertools and laser engraver. Very good.

[@krzysztof9120]

Perfection, indeed, and great fun.