HOW I RESET SOFT CODES ON FORD VEHICLES ABS, TRACTION CONTROL, ADVANCETRAC WITH OUT SCAN TOOL!!!

[@sharonholcomb2377]

You are Awesome! This fixed my abs, brakes, traction control, cruise control and collision warning lights reset. Mine was working, went in a store, came back out and all my warning lights were on. Thank you, thank you, thank you! Mine is a 2013 Ford Edge!

[@Subhi.Ashour]

Do the lights back on again after resetting, for example after days or weeks?

[@MrMcelbee]

YOU ARE AWESOME, YOU ARE THE ONLY KZbin VIDEO THAT ACTUALLY WORKS ON THIS ISSUE, I THANK YOU SOOOO MUCH, I DID BOTH MY VEHICLES. KOOL!!!

[@jaredblau4233]

Thank you so much! Tried this today and it worked. Can’t thank you enough as I needed my car today for a minor emergency. Woke up to a message saying low battery and had no power steering etc. Your video was very easy to follow and understand and saved me....from crying. A thousand thank yous.

[@johnkohler8926]

THANKS SO MUCH THIS ACTUALLY FIXED MY POWER STEERING!!!! Jumpstarted car and after it started told me power steering, steer assist, traction control, abs, hill assist all of it needed repair. I thought I fried the chip. Power steering was actually out. Unplugged battery 5 mins and everything is running great! I OWE YOU!

[@monogee]

MY MAN, THANK YOU SO MUCH!!! Ford would have definitely hit me in the head to reset this.

[@filmonberhe2238]

Thanks man, u saved me a lot of money. They told me ot will cost over 1000 to fix this problem. NEVER TRUST A mechanic

[@wengdivinaflor9576]

Same here in the Philippines they cost almost 69 thousand pesos. I will try this. I don't know about car I just drive , until I need to search about this ABS MODULE , because the Ford casa will pay me a lot of money .Thank you George.

[@bongsoliven7822]

@@wengdivinaflor9576 kmusta po? Effective po ba aa inyo? Sa akin tinesting ko ngaun pero ganun pa din. .may abs, hillstart assist etc nakailaw pa din 😔

[@alexgonzales8859]

@@bongsoliven7822 hello bong sakin umilaw sya while driving. then pina scan ko. u3000 lumalabas sabi nila abs module daw. na fix na ba sayu?

[@abdulrahmanalsaati5621]

I would like to thank the person in the Video for his nice explaining with many info about this matter, I tried today for my 2014 Ford Edge, and it works!! Thank you again for sharing ur knowledge, u saved my time n my money, God bless u. :)

[@iannluci]

Just want to say thank you !!!!!! 2014 fusion with ..advanced track n steering fault light on.....and no pwer steering....this worked !!!!!! Hopefully buys me time till i can get rid of this nightmare car

[@htc5972]

It's happening on my 2014 fusion as well When it happens my steering wheel gets stiff and when the lights go off it returns to normal Was your fusion push start ?

[@iannluci]

@@htc5972 no mine has key start

[@iannluci]

@@htc5972 I will never forget the day this happened...was at work 100 miles from home...and of course a blizzard dumped 9 inches of snow in a few minutes...I drove car whole way home with power nothing....but did this...and it reset everything...and car still runs great ...never happened again

[@htc5972]

@@iannluci Damn that sucks it also sucks that mines push start so I'm not sure if it'll work the same.... but I'll try and do it anyway

[@iannluci]

@@htc5972 keep me updated....I hope it does.....

[@jrhong517]

Thank you. I fixed my 2014 taurus 2.0, with traction control not available, adaptive cruise control not available through your method. Being no key start button, I pushed button without pressing brake pedal. And I took the neg terminal of battery for 5mins. It fixed. 😃

[@radz35]

Thanks this worked on my wifes Ford Fusion. lights came on after the battery went down and had to be boosted off. The power steering stopped working. After we did what you said in your video everything returned to normal and I am sure saved a costly repair bill Thank s again

[@Ymari_thedon]

radzney white Hey bro. I have a fusion as well. My advanceyrack and power steering lights cams on. You said this worked for you right?

[@ashstackz]

My power steering light came on with the Avancetrac light but I was driving and lost power steering I wonder if that will work.?

[@dallasneugebauer97]

radzney white did it work? My advance power steering came on and power steering stopped working as well. Did this method work did every thing go back to normal?

[@original2858]

I have a 2010 Ford fusion. I had a sensor taken out of my tire . Ever since my power steering service now and advance Trac popped up. Also saying tire pressure sensor fault. I replaced the power steering because it was so hard to drive. Got it back three days later. Drove home working. Bam by the time I got home it locked up again. This is 45 min later. I know my power steering doesn't need replacement. I just got it fixed. Something is throwing it off. My car even stalls when driving. Tires spin and want go. It jerks back. I cut off and back on then take off. Some times, well most of the time I have to keep doing it. Horrible! If this can reset on my fusion power steering and advance Trac then I will be saved from money. The replacement of the steering broke me. I have no more I can do with this car. Please let me know how your fusion is doing and If this is what you were going through. If this helps for real I will be so happy!

[@SuryadevaraRammurthyNaidu]

@@original2858 bro did it work for you. Please let me know I am facing the same issue

[@DavidSantos-ec9lb]

Thank you!! Yes it worked you saved me money. It was simple easy

[@pompom11]

George, you’re the man! I’ve been driving since 1971 and that was before computers ran cars and we could fix everything ourself. Anyway, my Lincoln MKX “check engine soon” came on. I followed your instructions perfectly and IT WORKS PERFECT. No more bad messages, thank you for this Ford video, you saved me diagnostic dealership fee’s and any other bullshit the mechanic could think up.

[@kimkartrashianstopmakingst9060]

Nice detailed step by step instructions George! Thank you.

[@brettstooltutorials6017]

Fantastic, I had both lights come on the night before the car was due to be picked up after selling Tried this with the Positive lead Left it while had dinner, reconnected and it worked, didn’t lose radio stations etc Ford 2009 Mondeo

[@alamocityshuttle]

Thanks this worked on my 2011 ford e 350. At first I tried the 5 min idea but it didn't work , on my second attempt I did 10 min and so far advanced tracking signals are off. Thanks for the video.

[@original2858]

Did it stay off? The first attempt it didn't work but try ten minutes and it worked for you? In about to try and want to make sure i do it right the first time.

[@محمدچاڵاخی]

Thank you very much, I have had exactly the same problem but after I tried that way. problem is solved and everything is going well.

[@nelsonmongiovi3539]

Awesome. I couldn’t reach negative terminal, so I disconnected positive. Worked. Thanks. Great video.

[@jasmineperez0928]

This saved my wallet!!!! I tried this on my 2013 Ford Fusion and it worked!

[@ronniemassart3834]

What all lights were on. I have 3 lights on on my 2016 Fusion along with Beeps every time I start it. I have to keep hitting the ok button to stop the Beeping

[@bastiansnow]

@@ronniemassart3834 Did you solve it?

[@ronniemassart3834]

@@bastiansnow No,I think it's going to have be fixed by taking my wallet out and paying a professional with high end equipment but I'm such a tight bastard and been off work for 5 weeks and counting so the wallet is thin

[@waynesalekin4737]

Super grateful! Thanks very much. This was driving me nuts.

[@wangwan3856]

your theory is totally works, i have fixed hill assist issues on my fiesta ecoboost. hopefully can last longer, hate when abs indicator appeared

[@PreetSingh-rr2ms]

Thanks mate! You saved my money! It worked with my Ford Fusion 2013....👍🏻

[@desibazer6430]

I have a 2012 Ford Fusion and when I disconnected negative the ignition and everything shut off

[@lenovomonos5232]

Bonjour j'ai le maime problème c quoi la panne svp

[@seahwch4835]

Thanks. Great. Had the same problems... abs lights and front airbag light came on and off on my 2016 focus Titanium saloon. I just followed your instructions,but instead of disconnecting the negative terminal, I disconnected the positive instead...for ease of access. Drove the car for a while and the lights didn't come on. Acceleration seems smoother.

[@ivsyw0415]

I have three light on: engine, tire pressure sensor and ABS. Also, the fuel inlet message on. I use this method, for 5 mins. When the power on, the engine light off and fuel inlet message gone. Amazing! Thanks!

[@jessilee2106]

What about the tire pressure light?

[@lucianbrighi]

I just done mine but the the light was still on after doing all the steps like you. So what i did was to take it for a quick spin and pressed the brake hard to engage the abs and then the light was off . I quess it activated/forced the traction control to engage.Thanks for the tips.

[@CrocOncrac]

Your abs module will not entirely reset until u go above a certain speed after repairs .

[@lucianbrighi]

@@CrocOncrac Hi. Very interesting what you are saying. I do not remember if i drove on the motorway speed after that but now seems to be ok. I also had an aftermarket engine kill relay with remote and after having a free battery check at Halfords they said its the alternator not charging correctly and have to change it. But I removed the engine kill relay and no more problems. I think that was drawing too much power in standby. Ford fiesta ofcource.

[@CrocOncrac]

@lucianbrighi I'm aware it only has to be around 15mph or 25kms I'm also unsure if that would affect abs unless your drawing power from a constant power supply that's to do with the abs .. Abs wheel speed sensors , sense the friction in relation to the spin of each wheels sending the same or equal number of spins to the ecu (engines cumputer) Traction control on the other hand detects the slip of one wheel compared to the others there for allowing a certain amount of play between the rotation of the 2 wheels aligned . For eg , on dirt one wheel will spin faster then the other this will trigger your traction control if you don't have a button to turn it off . If I need to explain further , while entering a corner or long bend one wheel would have to rotate more then the inside wheel to allow correct dynamics.

[@mancuso9090]

Thank U so Much Bro. easy and fast solution ..Thumb up.. U made people smile.

[@jjfelan541]

I did the same on 2018 Ford Fusion S and it worked just as good. Couldn’t reach the negative terminal to disconnect so I did it by doing it with positive. Must work for all fords. I did have a 2017 F-150 STX that would malfunction and the method I used for that was master reset the head unit( radio)

[@tellyyoung4571]

Will be trying this tomorrow one I repair my front passage tire! Thanks for helping us out!

[@Kai-rq2ci]

Thank you so very much!!! It did the job. Saved me hassle, time and money. Much appreciated!

[@fastedjuan247]

Thanks so much! I will try this! We had bad weather recently, car drove fine! Started it today and all those lights were on. I'm thinking dirt and slush got on a sensor?

[@psnauspuff]

Genius! I feel the same way about mechanics, and I am one... now days they don’t FIX anything, just know how to replace.

[@ogieabanilla3257]

Fantastic. Worked like a charm. Thank you.

[@alphaxray100]

I been having this problem for ever, I’m gonna try it right now

[@ovidiumarian6719]

I do this and is working. If isn't working do 2 time's, control the fusses, somewhan can't fuse making this kind of hack, if dosint work control or change relais. This problem had cum when I had cleaned the contacts of the fusses and relais. Thank you for the video is very good an save all for spending money.

[@濱濱林]

I tried this three months ago,and it worked, now it comes again.... Can't endure the repeated flopping, so I tear up the speedmeter and kill the horn and three smd lights (track,brake, abs). Now, deaf and blind are better 😄😄

[@dansmit9051]

Thank you So much worked on 2015 Focus. And I'm kinda broke, saved us 135.00 bucks

[@Amen.22]

I have the same car, so I’m going to try this.

[@ShonEpps]

I TRULY APPRECIATE THIS VIDEO!

[@deuceliter]

Will be trying this today, thanks for the help!!

[@Luisjimenez-v6c]

Por cuanto tiempo se desconecta

[@dyeynuevediyes]

Awesome video. I have the same issue but I have a push start titanium so it didn't work. lol. maybe you know how I can do that on mine? Would appreciate the help.

[@AlKiMisT1111]

SAME UGHHHH lol Please help us push button peeps! 🥹

[@juanaviles1649]

I removed the ABS harness for the abs do you think your method here would also work on a 2011 Ford F-150 XLT. I was replacing a brake line on the ABS and a removed it knowing I should have removed the battery but now I'm having all these lights same as you lit up my dashboard..

[@teguhgpmr132]

Thanks for Your Tips. It's working. Good Jobs 👍👍. Salam from Indonesia

[@SharonTaylor-dy8bd]

Does removing the negative terminal affect your radio?

[@ccjcm]

Thanks a lot. But I have a question. After this procedure the abs an tract system restart to work normally? Because now my panel says : low oil level. But the oil is ok.

[@rommelf.calvario9815]

Hi, will this work to Ford Ecosport 2017 model? Please advise. Just today I have problem with ABS Malfunction. Please help.

[@ChristyKrohne]

What do you mean by Hard Code? By the way, my Odometer/ Speed Needle is also not moving to show what speed I'm driving.

[@chrisjames_2024]

Just seen another post where one person turned the key on (not the ignition) and stepped on both the brake and the accelerator for a couple seconds and that turned the engine light off. I haven't tried it cause it's 2:17am, it's blowing and it's damn cold outside.

[@WF-ww2rw]

my ecosport has break malfunction, ABS and hill start assist malfunction on the message. I tried the Hill Start Assist and it didnt work. If I restart my car with your method, Will it fix the functional problem too? Or just reset the light indicators. Thank you!

[@chiyogaming]

Hi man, was wondering if this could solve ford ecosport 2016 with TCS, ABS, HILL ASSIST solid light on? Or could it be a wheel sensor or ABS module issue?

[@tommylpottsjr1708]

If I can’t reach my negative terminal, will this work the same if I remove my positive cable instead?

[@sugarvenom2189]

yes

[@laxcker]

2011 Escape worked like a charm

[@and_dries]

Is the U3000 error code a hard code, should I replace the abs module?

[@tommyemery4764]

I was really hoping this would work on my 13 Fusion… have the same lights plus airbag. Replaced a wheel speed sensor and they went out for a week and they came back… did this HOPING and still on. Looks like I gotta dig for the issue. Video was very helpful though, straight forward.

[@flaviog5285]

Have the same issue with my 13 mkz. Was told abs module

[@lego4virgo]

How does one know the diff between whether it's a soft code vs a hard code? I think this happened when Pep Boys replaced my two front tires..came on after they were finished.

[@peterocholla6838]

I tried the steps on my 2013 Ford Fusion but it did not fix. Any other recommendations

[@idearing]

Does that help fix the problem? Or just reset the codes.

[@thoughts8425]

What about a push to start ford? Does the ignition still remain in ON mode when you disconnect the battery?

[@ricoangelo]

Hey George. How are you? Hope everything is okay. My ABS, traction control and hill assist only comes on after I start the engine. I already tried the steps in your video, twice with 10 minutes of being disconnected, and the indicators still show up after starting the engine. Does this mean that mine is a hard code? Appreciste your response.

[@robisonramus4832]

Conseguiu resolver? Estou com o mesmo problema em um Ford Focus 2014

[@gabrielguerra8410]

@@robisonramus4832 I have the same problem, have you solved anything? if so please leave your solution :( I have Ford fiesta 2013 s automatic

[@johneemotovlog2073]

I think its a hard code. Same with me, U3000 abs module need to be replace.

[@dondonlopez1013]

It works also on ford everest 2016 model Automatic .?

[@tooljunkie555]

Have a 2015 ford explorer and tried this and it didnt work just a fyi for anyone that has a 2015 Ford Explorer going through the same issues thanks for sharing the video though I actually have a more serious problem

[@royzwerneman5680]

I owe you a beer. Thanks

[@iyadh.2060]

thanks for the video ....... I hope it will work with my car, i will try it tomorrow. .

[@jaymirza1]

Lovely Great Guy For putting this up It worked on C-Max 2017 Model

[@norbertdx]

Have a 2017 expedition that just threw the same codes and no power steering. I had the same Idea of disconnecting the battery but didn't know about leaving it in the "on" position, will try it again. thanks

[@19Dennis53]

I don't know how to thank you for the info on this video. My whole problem turned out to be the way I was rebooting the system and the key was the answer. I started off by changing the battery ($200.00) because the one they sold they car with was just a $60.00 car battery AND it said they battery wasn't being charged. So actually, I needed to do that in good time anyway.

[@AMO24739]

Dude thanks! I'm gonna try this tomorrow. Will let you know if this works.

[@ali.tiktib]

Did it work?

[@nailaamalia4309]

Did it work

[@oisindoherty2082]

Did it work

[@raymondbalisi1519]

Can i do this with my ford everest 2007 model? Do you think its applicable?

[@kevinkornman]

Does it have to be the - (negative side) or can it be the + instead? thanks

[@reydeguzman5528]

I'm sad it didn't work out in my keyless ecosport but thanks anyway for your sharing

[@benniewilliams2019]

REF 2009 Ford Explorer with hard code P0401 (EGR insufficient flow) for a few weeks. Now I have new (soft codes) ABS light/Service RCS NOW and RCS traction symbol light coming on and off erratically at random. I am aware these codes have nothing to do with the PO401 hard code. Found the ABS sensor harness connector from front left wheel at ABS module not fully plugged in and and un-locked. Cleaned both ends of this ABS harness and reconnected with connector fully engaged and locked. Problem continues, but very randomly now. Will your procedure work to remove the ABS soft codes/warnings, without curing the EGR PO401 hard code first? THANKS!

[@biancavenegas757]

Hi George. Will this work on push to start 2019 ford Fusion hybrid ?

[@aaronmaloney8]

Would this work on mk7 transit? Thx for sharing 🙏

[@michaeld_68]

Have 2005 explorer XLT 4.0 I scanned it with a cheap Actron code reader and zero codes but my abs and advance trac lights are on .My question is if I do your procedure will I need to complete the drive monitors??? If the lights go off I have to go through inspection but want to know if I'll have to run the monitors first ?? Appreciate your response . Subscribed!!!

[@quevicular]

Not a chance this this did not work on my 2003 Ford Windstar SEL. Did exactly what you said all sensors and reluctor rings have been replaced as well. Don't know what else to do to be able to check the actual ABS module as the codes do not show up on my autel OBD scan tool.

[@biff1tannen]

Great video😊👍

[@synthsakura6754]

Yeah did this shit and not only did it not get rid of the abs and traction control light AND the hill assist shit, my fuckin engine light is on now (and the abs light and traction control being on prior was because of a abs sensor which I had replaced) and now the lights won’t go off and after following this video to a tea now my engine light is on too. Wonderful

[@EARTHKEENING]

Can I reset it with a scanner if I have one ? Would it work with scanner .

[@ThePapichulo1117]

How do you keep it on the on position if you have a push to start that wound stay on on position when you plug the terminal back?

[@davidpena1228]

Great video, did the trick!

[@mohammedishaq2878]

Will this be able to pass my smoke check after resetting the hill assistant?

[@kecake13]

So I have a 2015 Ford Escape. I needed a new wheel bearings on my front driver. It kept flashing on my dashboard one day on a storm morning then the next day it just stayed. I got a new wheel bearings but it's still on the dash. I wonder if I'll work 🤔

[@Amen.22]

I tried it on my 2015 Ford Focus, but I disconnected the positive because the negative is hard to get to. It didn’t work, so now I disconnected the negative and I’m waiting 5 minutes. If it works, I’ll edit this.

[@rogergarcia4490]

Did It Worked? I’m Trying It Right Now On A 2003 Focus

[@andia050770able]

Thank you for sharing the tips. What about push bottom start engine type, how to make car ON without engine ON?

[@ksandbergfl9609]

press the ON button without your foot on the brake pedal, the car will on "ON" but not running

[@DjcLinxProductions]

is this applicable to keyless unit? mine is ford fiesta 2014 no ignition.

[@mikmykzdecastro1581]

Hi my ford fiesta 2011, has a check engine and transmission mafunction light and warning after i changed my battery. Do you think this will help?

[@kevinderrick4698]

Nice one I wish you could show me how to reset the BMS on a 2012 focus after battery replacement.

[@badactor3440]

Pull high beam lever 5 times, press and release brake pedal 3 times. Battery indicator light will flash 3 times....done!

[@kristianmopsticc2887]

@@badactor3440 LOL really ima try

[@badactor3440]

@@kristianmopsticc2887 let me know if it worked.

[@jrewillis]

Ignition on but engine not running. Rear fog light 5 times. Hazards 3 times. Wait 15 seconds. Battery light should flash 3 times. Done

[@angeloluzadas4336]

Can I do this method on my Ford Ecosport 2017 Titanium AT?

[@earthunknown]

Does this work on Toyota?

[@dayleeday797]

My literally went on when i put my cruise control on when I was on the highway weird but ima try this tmr and if that’s doesn’t work I’ll just take it to the shop

[@ScriderMT]

does this work when the immobilizer is in malfunction?

[@nailaamalia4309]

My Fiesta yesterday replaced the broken left lamp ball. Must open the battery and fuse box. Then ABS indicator appears, hand brake lights, and traction control. is this method useful for removing ABS lamps??

[@telsa694]

I have same problem to. But my car is keyless. So when battery socket removed and after replaced The car engine is off. How do i do ?

[@solomonrayreign6818]

It should be negative?

[@dannelsolomon6472]

Sir how about the engine check how to reset it?is it the same method?…..thanks in advance

[@rufusrunsgsp4610]

Has this procedure kept your car from going back to the codes?

[@cabhaveshthakkar6239]

George, I tried twice with positive and negative cords both, but it did not work. I have ecosport 2013 diesel model. Had already changed Right Rear speed sensor (as per scan report) (ABS) but it was showing same malfunction ABS service error. My car is keyless. But pressed once without using foot . Fruitless. Just a small query , do I need to press brake padels after removing battery cord.....? When I rejoined battery, it did not get all icons back , so pushed power switch again.

[@cjbongalon2064]

If i do this will i use my hill start again??

[@PrinceHallchippingham]

Did not work on my 2013 Fi50....but looking for other solution. Changed my right rear wheel speed sensor, but code seems impossible to clear.

[@Buttertoast665]

Hello Prince, Did you figure out the problem? my 2011 just threw a service advance trac light.

[@top7jqm]

Will it work for ford ecosport? Pls. Let me know?

[@ragehelsel]

does this work with a keyless start car / truck?

[@joshcrisman6020]

Would this work on a push button start

[@emerieremoroza4066]

Nice bro im gonna try it tomorrow hopes it works